unlock myphone S21???

[yhob]

pin out located at upper simcard holder with 3 dot,
. . .
Tx Rx none ground will connected to - supply

logs:

COM30 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: unlock
unlock method: standard
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6223:8A04]...
CPU: MT6223
high speed boot enabled
chip: 0011:4FCB:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.5958231F.[TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN_85FEEF84].rpl
====================
New firmware detected:
TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 5958231F
identification#1 protocol ver: 04
ver. sw1: TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN
ver. sw2: T01_23.07A.W0736.MP.FMCAM-FTP_V0.07, 7B10017A
ffs offset/size: 00800000/00800000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00800000
flash: 01227E22202200:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00A40000
Detected eeprom/ffs address is non-standard: 00A40000

Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation

Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00A40000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 005C0000
ffs chip: 00
eeprom/ffs area: 00000000:00A40000-00FFFFFF
detecting ffs structure pass 1...
......................
detect standard fat location pass #1...
.........................................
detect extended fat location pass #1...
.............................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN]_20080627-183424.B0E.bin
flash: 01227E22202200:2AEA0000000000
Backup required data Done
Patch required data...
detection procedure, wait...
error: phone is not locked or unknown eeprom
Patch required data Fail
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_595823 1F_TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0 736_MP_FMCAM-FTP_V0_07.BIN_85FEEF84_20080627-183431.B0X.bin
Finished, time used: 659 sec
Remove/Install battery now !

but unlock not done,,
any suggestion?

thanks,
yhob

[InfinitySupport]

Hello,

1.

====================
New firmware detected:
TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================


2. Did you tried to use another unlock methods ?

[yhob]

thanks,yes i try already other methods,read codes,smartfast,but same,

[InfinitySupport]

Please, explain what is "same" ?
What you see at phone LCD ?

[Brod Aries]

thanks,yes i try already other methods,read codes,smartfast,but same,


hi sir, i also have here one, need to be unlock, after successfull unlock in soft still locked...only provider sim is accepted, if i insert another sim it displays INSERT SIM, i tried also format ffs up to format ffs whole flash chip, now phone is dead:( i only back up eeprom file.

can you please upload full flash so that i can revive it again.

thanks in advance.

br

[InfinitySupport]

@Brod Aries
It was little bit not smart move to make "format whole flash chip" without full flash backup.
We can not upload any files for this phone yet due to we did not received any full flash readed from good working phone.

Also if you see at phone LCD text like "INSERT SIM" this means that phone is not locked but phone can not work with your sim card type due to hardware limitations.
There is a very small chance that it's rare type of phone protection, but we have no chance to check it untill we will get full flash backup from good working phone.
InfinityBoxSupport@gmail.com

[Brod Aries]

@Brod Aries
It was little bit not smart move to make "format whole flash chip" without full flash backup.
We can not upload any files for this phone yet due to we did not received any full flash readed from good working phone.

Also if you see at phone LCD text like "INSERT SIM" this means that phone is not locked but phone can not work with your sim card type due to hardware limitations.
There is a very small chance that it's rare type of phone protection, but we have no chance to check it untill we will get full flash backup from good working phone.
InfinityBoxSupport@gmail.com

its my mistake sir, hope that the thread starter give a little time to backup fullflash and upload it in any file hosting so that i can revive this phone.

br

[InfinitySupport]

its my mistake sir, hope that the thread starter give a little time to backup fullflash and upload it in any file hosting so that i can revive this phone.

br

Yes, let's hope we will get full flash backup soon.

[yhob]

sir,"same" display in phone INSERT SIM,only accetpted simprovider will accept,I send to support my readed fullflash back up myphoneS21,

thanks,

[bogg7]

@Brod Aries
It was little bit not smart move to make "format whole flash chip" without full flash backup.
We can not upload any files for this phone yet due to we did not received any full flash readed from good working phone.

Also if you see at phone LCD text like "INSERT SIM" this means that phone is not locked but phone can not work with your sim card type due to hardware limitations.
There is a very small chance that it's rare type of phone protection, but we have no chance to check it untill we will get full flash backup from good working phone.
InfinityBoxSupport@gmail.com


sir i have fullflash for this phone, but i dont know how to upload it

[noi]

@brod aries
i have a full image of your s21 myphone, i know you are in the philippines, you can get it to me or contact me in YM.

regards,
noi

[InfinitySupport]

Backup files received, files will be uploaded in support area and this model will be added ASAP.