View Full Version : BAD CONTACT CHARGER - N95 China phone
francis0000
07-01-2008, 13:41
help me please for my problem I'm a newbie.
what I'm gonna do?
:confused::(:confused:
francis0000
07-01-2008, 14:31
can anybody help me I owe you :(
please some one help with my problem
bro this is 100% charger problem just check ur charger and post result
francis0000
07-01-2008, 14:45
i've already tried to use different chargers but still the "BAD CONTACT THING" still pop-out... i really need help... BADLY
rehot the CPU , if not ok replace the CPU.
francis0000
07-02-2008, 02:09
rehot the CPU , if not ok replace the CPU.
ahm, sorry sir i dont know the "rehot" thing how does it do?
by the way sir thanks for your kindness..
is there any way to resolve my problem?? :(
ahm, sorry sir i dont know the "rehot" thing how does it do?
by the way sir thanks for your kindness..
is there any way to resolve my problem?? :(
Ops, this cann't be solved without taking it to repair shop. I ment it cant be solved by any code or whatsever.
francis0000
07-04-2008, 12:33
ok sir many thanks! ^_^
/\/\A/\/| DON
11-16-2008, 15:16
Brother just change your charger your prob will b solved your set i ok;)
electro_mohamed
11-16-2008, 15:26
yes and in other is the soft prob use sx4 and write pm
teknospc
11-16-2008, 16:33
you can try this : Re-Heat the PCB carefully and test again, someone put another solution some time ago and works for many models, get the ( - ) negative from the charge and trace a jumper to the negative of the vibrator or GND .... test please!
I hope this can help you
khokonhajigonj
11-17-2008, 05:30
you can try this : Re-Heat the PCB carefully and test again, someone put another solution some time ago and works for many models, get the ( - ) negative from the charge and trace a jumper to the negative of the vibrator or GND .... test please!
I hope this can help you
Ur advise is wrong man
khokonhajigonj
11-17-2008, 05:34
Brother i think ur original charger is bad. Now u try with market charger. If u have old charger open its charging base see what pin + and - now connect in market charger as like shown original. ur problem solve.
khokonhajigonj
11-17-2008, 05:42
rehot the CPU , if not ok replace the CPU.
Pls dont try to say rehot cpu. U know when need rehot CPU. Search forum u found many post where say when need to CPU rehot. If u dont know how to solve no need this kind of post. Everyman not know everything. What u know may be i dont know for this reason we share in forum.
MAKING OF CHARGER or bad contact FOR CHINESE PHONES
THIS MAIN PROBLEM IS WHEN U CHANGE UR CHARGER.
IN ANY CHARGER OPEN UR CHARGER'S CHARGING CONNECTOR THEN REMOVE THE WIRES FROM CONNECTOR.
RED,BLACK,GREEN,WHITE REMOVE RED & BLACK WIRE.
CONNECT CHARGER WITH PHONE REMOVE BATTERY
SEE - & + OF PHONE
CHECK NEGATIVE CONTINUTY WITH MULTIMETER TO THE CHARGER CONNECTOR POINTS
SOLDER BLACK WIRE TO NEGATIVE TRACED
SOMETIMES IN SOME SETS POSITIVE IS ALSO GIVING CONTINUTY U CAN ATTACH RED WIRE.
THE VOLTAGE IS OK BUT IT WILL NOT DISPLAY CHARGING THEN U HAVE TO TEST BY INSERTING BATTERY TO THE PHONE
BY ANY WIRE OR TWIZER CONNECT ONE SIDE TO RED WIRE CONNECTED TO THE POINT THEN SHORT OTHERPINS ONE BY ONE BY THIS WIRE.UR PROBLEM IS SOLVED
IN BAD CONTACT CHARGER PROB. U JUST HAVE TO TEST RED WIRE TO OTHER POINTS.
I TRIED THIS MANY TIMES .
teknospc
11-18-2008, 03:32
Ur advise is wrong man
I test whit Iphone clone i9 and works well after that my friend, also i can put phone photos here ....
http://img.photobucket.com/albums/v669/teknoblaster/test-repair.jpg
http://img.photobucket.com/albums/v669/teknoblaster/cellphones/phone397.jpg
And problem solved!
normen01
02-11-2009, 14:33
i had the same problem when i changed my charger because my original charger exploded,, here's what i did, i accessed engineering mode and disabled both UART for i think tst and ps, and then done! i can charge! hehehe its just that usb function for PC use wont work, well you just have to enable it again for the usb to work :)