PDA

View Full Version : v3 power key does not wotking


jimm07ct
07-07-2008, 10:25
hi all,

i have a motorola v3
problem is when i connect battery automatically power on

every thing ok
but only power button does not work


need help

scorpiobashar
07-07-2008, 10:32
try another flatcable if not chek 4 water damage on the small crystal ic's near flat connector

George(LMC)
07-09-2008, 05:24
i had the same problem mate, and i change the flex cable's connector and all was good, but first taste with other flex

***___LAMA-GSM_
07-09-2008, 06:22
try this & enjoy ....

gsmdoctorca
07-09-2008, 06:40
hi all,

i have a motorola v3
problem is when i connect battery automatically power on

every thing ok
but only power button does not work


need help

First check the capacitor c1420 ,it should be 3.3 v and above.also make sure the connector clean ,no any liquid erosion around c1420,if clean and v<3.3 v try to pull it up ,referring the pic attached by other guy's...

Br

Gsmdoctorca

gsmdoctorca
07-09-2008, 06:46
try this & enjoy ....


where did u get this pic.?! :) I think you really understand how it works.unfortunately not too many ppl knowhow about it....

this a universal method to fix defective IC pin without change it .give u one hint ,you can fix motorola ROKR keypad issue via the same way.....

Br

Gsmdoctorca

Tongco
07-10-2008, 06:49
try to change flex bro,

juwanapati
09-07-2008, 10:26
so how about the phone now ? solved or not ? if solved with who's trick ?/ what trick ?

magixian
09-07-2008, 10:55
i have a keypad fix flex which i use to write into the phone with rsd and phone will work perfectly, i downloaded from motox.info but i'm at home now, i will upload to all members tomorrow when i get to office!