karim_gsm
07-07-2008, 20:27
need pinout anycoll M-STAR D908 12Pin 2X6 plzzzz help :(
InfinityHelp
07-08-2008, 01:16
hello!
if this phone is based on MT62xx MCU- i can advice how to find pinout by multimter
karim_gsm
07-08-2008, 09:44
yes the phone is based mt62xx mcu.
need pinout anycoll M-STAR D908 12Pin 2X6 plzzzz help :(
How to find pinout for unknown model:
In most cases you need to know Gnd, Rx, Tx pins for flash/unlock operations. What do do if you don't have cable or you have new phone model:
1. find Gnd pin (it's required step, you can't continue until you will know Gnd pin location)
2. find Charge pins (it's optional step, just to save your time during future research)
3. find +Battery pins (it's optional step, just to save your time during future research)
4. connect cable Gnd to phone Gnd
5. try to connect cable Rx/Tx wires to all phone contacts one by one (except Gnd, Charge, +Battery pins) and try to read flash from phone
6. if flash read procedure can start this means that pinout found Ok and you can make other operations
Note about "Chinese models": a lot of different phones with the same name exist on market (as well as many different name phones with the same pinouts), so, if you see in our "cable selector" wrong pinout for "Chinese models"it's good idea to find correct pinout acording to above instruction and send found pinout information with full text from phone back label to InfinityHelp@yahoo.com.hk (InfinityHelp@yahoo.com.hk)
InfinityHelp
07-08-2008, 20:54
hello mr. karim_gsm!
please take multimeter, set it to voltage measuring mode.
check all pins one by one and detect needed tx/rx pins by voltage 2,7-2, volts