infinity team touch screen problem A8+ help

[jcjibz2]

there is no problem on the china A8+ phone i only try to format
but after i format theres a problem the touch screen not work no rtesponse even tou touch the screen

here is the log i alredy calibrate touch screen on the infinity but theres a error in the logs plzzz check...........


here is the log:
COM8 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:EB41:77BC
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: G60MTL_G60Mv01.01b05
Version: SIMC26_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35719801165791
connection Ok
detecting structure #5...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15error: detection failed (16 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 105 sec
Remove/Install battery now !

[jcjibz2]

i tried may times but theres no luck plz anyone can share a solution in this unit

[.::BHATTI::.]

did u tried to Complete Format FFS??????

[InfinityN]

there is no problem on the china A8+ phone i only try to format
but after i format theres a problem the touch screen not work no rtesponse even tou touch the screen

here is the log i alredy calibrate touch screen on the infinity but theres a error in the logs plzzz check...........


here is the log:
COM8 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:EB41:77BC
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: G60MTL_G60Mv01.01b05
Version: SIMC26_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35719801165791
connection Ok
detecting structure #5...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15error: detection failed (16 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 105 sec
Remove/Install battery now !


How about to read text in software log window ?
InfinityBoxSupport@gmail.com

[jcjibz2]

thanks 4 the rply

i dont know how to send a flash file into infinity so i upload it to rapidshare here is the link....i need a solution badly my due date on this phone is tommorow....

action taken on the phone:
read flash file fw. & eprom
format
write imei
calibrate touch screen no luck......

firmware:
http://rapidshare.com/files/128057361/flash_SIMC26_06B_PCB01_GPRS_MT6226_S01.G60MTL_G60M V01_01B05.BIN__20080708-004208.B0M.bin.html

eproom:
http://rapidshare.com/files/128059811/eeprom_SIMC26_06B_PCB01_GPRS_MT6226_S01.G60MTL_G60 MV01_01B05.BIN__20080708-003034.B0E.bin.html

[jcjibz2]

the file was sent in the InfinityBoxSupport@gmail.com
thanks

[InfinityHelp]

hello!

will check situation and fix this in next Chines Miracle software update

[jcjibz2]

how long i will wait for this update ??????????????
by the way thanks for your support...............

[InfinityHelp]

hello!

i hope it will be released on next weekend

[jcjibz2]

hi try the new update in the support chinese miracle v2.51
but still my problem not solve

here is the logs:
COM12 [VCP2] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:EB41:77BC
Connecting, wait...
Release Power button now !
Phone detected, wait...
warning: wrong packet cs
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: G60MTL_G60Mv01.01b05
Version: SIMC26_06B_HW
detecting structure #2...
0warning: wrong packet cs
done
44 byte(s) read
imei: 35719801165791
connection Ok
detecting structure #5...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15error: detection failed (16 tries)
What to do:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 78 sec
Remove/Install battery now !

[InfinityHelp]

hello!

will check situation