help infinity team, this error... [Archive]

View Full Version : help infinity team, this error...

ticksjarub

07-08-2008, 12:21

i have 2 times incounter this problem in two units, same problem or same error. :confused:

COM4 [VCP0] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
error: boot phase#2/1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now !

please help me this error could be the box or would be the unit? :)

.::BHATTI::.

07-08-2008, 12:30

what phone u r trying to service?????????

zinoubinabil

07-08-2008, 12:32

hi,
this is pinout error ; check your pinout

ticksjarub

07-08-2008, 12:35

all china mobile, NOKIA 6300 , SED x520...

zinoubinabil

07-08-2008, 12:38

all china mobile, NOKIA 6300 , SED x520...
what you mean!! plz more explain

ticksjarub

07-08-2008, 12:41

hi,
this is pinout error ; check your pinout

what would be the pinout for this sir?

SED X520 pic.

http://i304.photobucket.com/albums/nn177/ticksjarub/x520_.jpg

http://i304.photobucket.com/albums/nn177/ticksjarub/x520.jpg

NOKIA 6300 pic.

http://i304.photobucket.com/albums/nn177/ticksjarub/6300_1.jpg

ticksjarub

07-08-2008, 13:23

what you mean!! plz more explain

i used infinity and tried to software this two china phone, and encounter this error, i have search to any thread i found the pinout for this two units and apply it, but no lucks two units same error.

hope you can adviced me what this error means.

zinoubinabil

07-08-2008, 16:29

hello dear ticksjarub
this error mean wrong pinout, please if you found pinout for this two phones & steel have this error try to swap rx ¨tx.
waiting you

ticksjarub

07-09-2008, 06:42

hello dear ticksjarub
this error mean wrong pinout, please if you found pinout for this two phones & steel have this error try to swap rx ¨tx.
waiting you

i tried to to swap rx tx sir unit not dettect, even error not exist. please help me the right pin out for this. 6300 im return to owner, im stel have a SED X520 need right pin out.

ticksjarub

07-09-2008, 06:48

need favor sir also need pinout NEC 188 also china phone.

need pinout.

NEC 188
SED X520

thanks in advanced the one who give.

gsm5378

07-09-2008, 06:51

Near sim jeck 7 point shows, but cpu side first rx and second tx , its cheked 100% ok pinout

ticksjarub

07-09-2008, 06:53

Near sim jeck 7 point shows, but cpu side first rx and second tx , its cheked 100% ok pinout

thank you sir, but what do you mean, need full information.

ticksjarub

07-09-2008, 06:58

Near sim jeck 7 point shows, but cpu side first rx and second tx , its cheked 100% ok pinout

what pinout this for? NEC 188, SED X520...? :confused:

ticksjarub

07-09-2008, 07:25

this is the pic of the PCB.

NEC 188.

http://i304.photobucket.com/albums/nn177/ticksjarub/NEC188.jpg

SED X520

http://i304.photobucket.com/albums/nn177/ticksjarub/SEDX520-1.jpg

ticksjarub

07-09-2008, 09:43

thread useless, problem not solved, please kindly close this thread, please.. thanks. :mad:

zinoubinabil

07-09-2008, 10:19

dear you are who make this thread useless; you know why!!
1)- you didn't read sticky threads.
2)- if we have this pinout you will found it here C:\Program Files\InfinityBox\pinout\ChineseMiracle .
so please read this thread carefully
http://gsmhosting.com/vbb/showthread.php?t=476373
thanks for your attention

InfinityHelp

07-09-2008, 13:04

hello!

for all phones with unknow pinout i can advice very fast and easy way to find tx/rx
open phone, make sure it is MT62xx MCU based.
now just take multimeter, set it to voltage measuring and then touch one by one all phone pins.
when you will see voltage 2,7-2,9 volts- this will be tx/rx

ticksjarub

07-10-2008, 04:40