View Full Version : V29 New firmware detected
alamgir80
07-09-2008, 07:03
====================
New firmware detected:
LCBJ26_05C_PCB01_GPRS_MT6226_S01.L361E02_6_20_1_2T 04S1219_M411C.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: E1F0532E
identification#1 protocol ver: 04
ver. sw1: LCBJ26_05C_PCB01_GPRS_MT6226_S01.L361E02_6_20_1_2T 04S1219_M411C.BIN
ver. sw2: L361E02.6.20.1.2T04S1219_M411C, D91F514B
keaelite
07-09-2008, 07:10
====================
New firmware detected:
LCBJ26_05C_PCB01_GPRS_MT6226_S01.L361E02_6_20_1_2T 04S1219_M411C.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: E1F0532E
identification#1 protocol ver: 04
ver. sw1: LCBJ26_05C_PCB01_GPRS_MT6226_S01.L361E02_6_20_1_2T 04S1219_M411C.BIN
ver. sw2: L361E02.6.20.1.2T04S1219_M411C, D91F514B
only new firmware detected its ok to continue what do you want to do.
just make back up
br
keaelite
alamgir80
07-09-2008, 07:10
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:58C1:889A
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: L361E02.6.20.1.2T04S1219_M411C
Version: LCBJ26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 35044801123456
connection Ok
detecting structure #5...
0 1 done
204 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 13 sec
Remove/Install battery now !
keaelite
07-09-2008, 07:12
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:58C1:889A
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: L361E02.6.20.1.2T04S1219_M411C
Version: LCBJ26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 35044801123456
connection Ok
detecting structure #5...
0 1 done
204 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 13 sec
Remove/Install battery now !
good job thanks for the test report.
br
keaelite
InfinityHelp
07-09-2008, 12:55
hello!
please send this backup to mt62xx@gmail.com