PDA

View Full Version : this is how I fix my N95 8G with infinityBox


GalaxyMan
07-09-2008, 22:35
the phone is N95 8g the pin under the SIMcard place
and the flash file is

N95_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04_MP_V32__ Nokia-N95-8GB_16m_En_Ru_Fr_Ml_Id_Vn_Cn_Ar.B0M

and this is the story :)
I got a working n95 to Edite the arabic lang

I read the flash file with SpiderMan box and Edite it with Z3x Editor

I write the flash back to the phone the phone dead

I try with alot of flashes with spider but no luck the phone still dead

I try with flashes from infinityBox support the phone start but with white LCD

then I got another phone and I read it's flash file with spider and flash the phone

but again the phone dont start and still dead

so I read the flash and EEprom with Infinitybox and flash the phone and pingo

the phone work ok

and this is link to the flash file and Eeprom

http://rapidshare.com/files/128466328/readed_N958g_Open_phone.rar


thanks to infinity box

br
GalaxyMan

ahmedasmet
07-09-2008, 22:48
thank mr: GalaxyMan
good woork

.::koolfriend4u::.
07-09-2008, 23:10
@galaxyman

thnks for sharing nice tips..
also thnks for sharing good wrking n958g full flash file..
keep going..

(but,one doubt??!!wats the initial status of tht phone??dead or re-start??)

good luck

InfinityHelp
07-10-2008, 00:23
hello!

thank you for sharing your experience!!!
i will upload this file to support

vbfather
07-10-2008, 00:27
Thank you very much bro
i really appreciate this help

BR.,

elkawasmy
07-10-2008, 05:09
great tips sharing Galaxy Man and that also proof that Infinty Box is the best tool for china phones

good luck for all




BR,
Elkawasmy

GalaxyMan
07-10-2008, 12:21
thanks all for your reply

br
GalaxyMan

vinodbhai
07-10-2008, 13:14
brother i cant connect the phone by pinfinder it says failed plz help

GalaxyMan
07-10-2008, 13:35
what cable do you use
is the RX TX GND under the simcard place?

if so you have to use the free wires cable and open your phone and sold the wirs to the RX TX GND then search

br
GalaxyMan

vinodbhai
07-11-2008, 16:30
i m using infinity pinfinder cable nd i also try by wire near by sim.pinfinder do not dectect the phone

vinodbhai
07-11-2008, 16:30
i m using infinity pinfinder cable nd i also try by wire near by sim.pinfinder do not dectect the phone plz give the pinouts

GalaxyMan
07-11-2008, 17:02
this n95 can be connected with 3 kind of cables debend on phone ver

1- cable connected in USB(charger place)
2- cable connected in the (hand free place) like moto c117 socket
3- open the phone and connect the free cables wired to the RX TX GND under the sim card place

so if you remove the sim card and can see the RX TX GND under the sim card place so you have to sold the wires and search with ben finder
if not under the sim card so try 1 or 2

br
Galaxyman

InfinityHelp
07-11-2008, 17:45
hello!

best way is to post picture of PCB
then we will recognise which type is it and where is located tx/rx

jolie
07-18-2008, 00:11
thanks bro good work

vinodbhai
07-18-2008, 11:57
thanks galaxy man for reply