pinout for n95 8GB rm-159 new

[alknadir]

please whocan help for pinout for
the new N95 8GB rm-159 (same as original) différent with that in pinout image of infinity.
connector same as v3 motorola.
i tried with pinfinder (L14B) but no connection...
thanks

[IkaMazini]

Try with L10B

././././././././././././././././././././././././././././././././

[GalaxyMan]

if you can see the GND, RX, TX under the simcard so the connector will not help
you have to use the free cable wires and sold them to the GND,RX,TX after you open the phone

[InfinityHelp]

hello!

or post PCB pciture

[J_M]

please whocan help for pinout for
the new N95 8GB rm-159 (same as original) différent with that in pinout image of infinity.
connector same as v3 motorola.
i tried with pinfinder (L14B) but no connection...
thanks


if it is 10 pin USB

Try this:
[N95 8GB Chinese phone pinouts]
USB pin 1 = GND
pin 5 = RX
pin 6 = Tx

[ibhe]

i agree with galaxyman bro.... this is my log:


COM3 [VCP3] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:D541:FBC4
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: ACEA80F098E59F:ACEA8000000000
flash: EC257E25082501:2CEA0000000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2CEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:2CEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2CEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2C0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.8DF48BE6.[N95_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04_MP_V32.B IN_E18EF9B1].rpl
identification#1 detection finished
device-id: 8DF48BE6
identification#1 protocol ver: 04
ver. sw1: N95_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04_MP_V32.B IN
ver. sw2: MAUI.06B.W07.04.MP.V32, 4E06711E
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:2CEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[N95_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04_MP_V32.B IN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[N95_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04_MP_V32.B IN]_20080725-122501.B0E.bin
flash: EC257E25082501:2CEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: EC257E25082501:2CEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _8DF48BE6_N95_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_0 4_MP_V32.BIN_E18EF9B1_20080725-122523.B0X.bin
Finished, time used: 202 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[shiyam@]

pls ibhe send me to n95 8gb pin out

[KHJAMAL]

http://www.gsmhosting.com/vbb/showthread.php?t=552264&highlight=pinout+rm-159