prb connection e95

[wejwej]

slt
i have nokia e95 and i need add fr language, but not connected with infinity,
pin
Keyboard top
1.........18
18: Gnd
7: Rx
9: Tx

inverse tx and rx
18 gnd
7 tx
9 rx

i have this msg

COM3 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
error: boot initialization step-2 failed: A0
error: boot initialization step-2 failed: A0
error: boot initialization step-2 failed: A0
error: boot initialization step-3 failed: 40
error: boot initialization step-2 failed: A0
error: boot initialization step-2 failed: A0
error: boot initialization step-3 failed: 00
19200 fixed
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 5 sec
Remove/Install battery now !

[InfinityHelp]

hello!

by this log i can say that wrong pinout is used.
can you measure voltages on all phone pins?
tx/rx will be with voltage 2,7-2,9 volts