ZT 8188 RepaireD BY INFINITY

[W][e][R]

here log




COM2 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:0DC1:211E
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.49F2038B.[NEOTEL26_06B_PCB01_GPRS_MT6226_S01.086051_604_V904 5.BIN_68BB3B22].rpl
====================
New firmware detected:
NEOTEL26_06B_PCB01_GPRS_MT6226_S01.086051_604_V904 5.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 49F2038B
identification#1 protocol ver: 04
ver. sw1: NEOTEL26_06B_PCB01_GPRS_MT6226_S01.086051_604_V904 5.BIN
ver. sw2: 086051_604_V9045, DDC44497
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 98004900000002:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[NEOTEL26_06B_PCB01_GPRS_MT6226_S01.086051_604_V904 5.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[NEOTEL26_06B_PCB01_GPRS_MT6226_S01.086051_604_V904 5.BIN]_20080710-160756.B0E.bin
flash: 98004900000002:2AEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 98004900000002:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_49F203 8B_NEOTEL26_06B_PCB01_GPRS_MT6226_S01.086051_604_V 9045.BIN_68BB3B22_20080710-160846.B0X.bin
Finished, time used: 286 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !




here full firmware ditected :)



http://www.rapidshare.com/files/128638184/zt8188.rar.html

[InfinityHelp]

hello!

thank you very much!
downloaded!