View Full Version : T539 not accepting codes
NAT. SACKEY
07-11-2008, 13:12
please any help as to how to unlock this phone
which not accepting the codes?
Phone info:
~~~~~~~~~~~
Phone model: SGH-T539 (with MSL security)
FW version: T539UVGH5
Phone IMEI: 359259010******
Unlock codes: (NEW / OLD)
~~~~~~~~~~~~~
PCK: 25092280 / 30702028
SPCK: 00000019 / 35684465
MCK: 41082780 / 24227713
#0133*SPCK# : reset SP Lock
#0141*PCK# : reset SIM Lock
#0199*MCK# : reset Phone Freeze status
OK - Finished
Ja\/\/aD
07-11-2008, 16:06
#0133*SPCK# : reset SP Lock
#0141*PCK# : reset SIM Lock
#0199*MCK# : reset Phone Freeze status
try to reset sp lock/sim lock without sim card
or post result
NAT. SACKEY
07-12-2008, 12:34
pls when i enter both SPCK and PCK
i get `not yet personnalised`
but if i enter that of the MCK
i get `incorrect entry`
but am still getting wrong card with sim.
power on the phone with wrong sim card
tape the mck (nember will not appear) the ok
tape after that pck then spck.
good luck
Dimortal
08-21-2008, 22:44
What Cable You Used.....
Because D800 Or V804 Not *******....
Dimortal
08-22-2008, 17:55
E210 Cable ******* But No Connection....
Dimortal
08-22-2008, 18:26
Also What Procedure Was Used....
Tried Says No Code Found On Server
Only Connection Is 2.51 AND 2.54 3g Code Reader....
Check Pic
Phone info:
~~~~~~~~~~~
Phone Model: Beat
Revision: T539UVHA1
IMEI: 35925901060***X
Manufacturer: Samsung
Connected to server
Unlock codes:
-------------
No unlock codes available!
Disconnected from server
Ja\/\/aD
08-22-2008, 20:27
please first chekc your phone, is it network lock, if yes
Please try to unlock with 3g EU direct unlocker
Dimortal
08-25-2008, 21:04
Yes It's Network Locked To T-Mobile USA...
T539 Samsung Beat.....
Ja\/\/aD
08-25-2008, 22:25
please try to unlock with version 1.60
1.50 old version
T539 EEprom or flash file needed please!!!!!!!!!! thenk
PILONCILLO
01-09-2009, 23:14
i try with direct unlock and dont work
Orange_Dominica
01-10-2009, 03:48
Hi
This is Trident/AGERE Platform
I dont have this model here right now to Pre Test...but try this
Power on phone
Run the Samsung Agere MSL security support module. use E210 cable.. but only connect RJ 45..USB not required.
Try and do direct unlock (function selection unlock)
Best Of Good Luck
;smokin