D900 read code problem

[Kalidil]

Hi there,

I got a problem to read codes from D900, tried about 5 pcs with always same error : "bad anwser from phone! [0006]".

I tried to read codes with D800 and V804 cables at all available speeds.

Please let me know what's wrong.

Screenshot link below, sorry but for unknown reasons I could not attach it to this post.

http://www.kalidil.com/d900unlockpb.jpg

By the way, I just wanted to mention that D900i works fine.

Best regards,

Nicolas

[Ja\/\/aD]

remove battery from phone
insert cable and click start, after 2 sec. insert battery

follow instruction i hope solve your problem

Thanks

[Kalidil]

Thanks for your trick, but it did not solved the problem.

it does same as before :

Initiating TAT mode... (Press PWR ON on phone for ~2 seconds)
Bypassing MSL security... (Press PWR ON on phone)
Sending application to phone...
ERROR - Bad answer from phone! [0006]

Any other suggestion ? does anybody successfully read this phone model codes ?

Best regards,

Nicolas

[chahin]

reset the phone using this code *2767*3855#
the reppet the unlock
good luck

[Ja\/\/aD]

Try again, or please read Instruction carefully

[Kalidil]

Thanks for your input chahin but it doesn't solve my problem.

Javvad I have looked at the manual, what can I have done wrong if D900i can be unlocked and D900 can't ?

I already tried many times with 5 different phones.

And I would like to mention that "fraguelfire (http://forum.gsmhosting.com/vbb/member.php?u=122962)" who posted D900 successful unlock made a mistake his screenshot actually shows he unlocked a D900i. (Post Only Successfully Unlock with Screenshot & Instructions (http://forum.gsmhosting.com/vbb/showthread.php?t=541778) thread)

By the way there is an error on the Z140/Z140V unlock tips in EUB shell it should be same as Z500 tips (not powered off).

Best regards,

Nicolas

KALIDIL SARL