kungpaoski
07-20-2008, 08:45
Mates how can i resolved this. SX1 after manual format *,#, power key phone now displays when powered-up "phone start-up failed, contact service provider. Original problem here: http://www.gsmhosting.net/vbb/showthread.php?t=567826
Need some advice how tro proceed. thanks
b.r.
Mates how can i resolved this. SX1 after manual format *,#, power key phone now displays when powered-up "phone start-up failed, contact service provider. Original problem here: http://www.gsmhosting.net/vbb/showthread.php?t=567826
Need some advice how tro proceed. thanks
b.r.
So, is it solved, or not?? If not- try to find WinSWUP (v14) for SX1, and original USB cable for this. Hold joy (central), and than press power on phone (grey screen of bootloader phone) and connect siemens with USB cable. Check everything in SWUP, without "core" and check USB mode. After this click START. When process is done, use USB-serial cable for x65 siemens series, uncheck all without "core" and use needed COM port (USB-seriall COM port, you can find it in device manager), and flash E-Gold part of phone (just like old Siemens- S55). Than format phone (*#+power) and everything should be ok. If not- something wrong with OMAP flash IC (symbian part). Good luck