w850 stops at 97%

[FU_Too]

-- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
gets upto 97% then nothing happens

this set was working ok and have previously been able to put it in bypass mode but now after full flash cant get it into bypass as it just shoots up but stops at 97

tried flashing in normal mode but still reading stops at 97%

[GSMLover2010]

-- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
gets upto 97% then nothing happens

this set was working ok and have previously been able to put it in bypass mode but now after full flash cant get it into bypass as it just shoots up but stops at 97

tried flashing in normal mode but still reading stops at 97%

I think you flashd phone with CID53 .........
at this time dreambox have problem with recognize w850 cid 53 and you must select K800 in phone model
tested and work if you want I can post log..
BR GSMLOVER

[gbluez]

its the matter with "own preloader".
try to use stage2 directly.

[FU_Too]

its the matter with "own preloader".
try to use stage2 directly.I tried with stage 2 and just cant get it to accept TP always "working" time out and stage 1 just doesnt even start at all.

@GSMLover2010

definitely not flashed with cid 53 but tried setting for k800 and still the same goes to 97% then just stops:( thats with k800 cid52. with k800 cid 53 setting doesnt even start process.

[GSMLover2010]

my frind
phone at this time is alive?whats problem?
if phone die you can test this steps:
1-try with v3.5 with w850 & k800
2-I have many cases that problem in connect ic and usb Ic and with a heat or change problem was solved
3-if again always stop at 97% you can heat the flash ic or again not respon and still problem reball the ic then if still problem you must change flash ic....................
its all my experience
br
gsmlover

[FU_Too]

my frind
phone at this time is alive?whats problem?
if phone die you can test this steps:
1-try with v3.5 with w850 & k800
2-I have many cases that problem in connect ic and usb Ic and with a heat or change problem was solved
3-if again always stop at 97% you can heat the flash ic or again not respon and still problem reball the ic then if still problem you must change flash ic....................
its all my experience
br
gsmloverno, it seems fone is now not alive. it was ok before I used DB but now no program sees it and set for w850 doesnt start stage 1 and not connect TP stage 2, set as k800 just goes to 97% stage 1 and not connect TP stage 2

[gbluez]

Here, (http://www.mobile-files.com/forum/showpost.php?p=406292&postcount=4) just a reference ;)
Hope it done for you also.

[GSMLover2010]

Here, (http://www.mobile-files.com/forum/showpost.php?p=406292&postcount=4) just a reference ;)
Hope it done for you also.

bro nice info
I test it ........................

[FU_Too]

Here, (http://www.mobile-files.com/forum/showpost.php?p=406292&postcount=4) just a reference ;)
Hope it done for you also.
now setool doesnt see the fone anymore on fighter cable:(
so I supposed completely dead now:(

[GSMLover2010]

now setool doesnt see the fone anymore on fighter cable:(
so I supposed completely dead now:(

you have tampered flash ic do empty fill steps..........

[GSM Dream]

Hello!
This is hardware issue.

[FU_Too]

Hello!
This is hardware issue.so I could have damaged phone while using Dreambox?

Phone was ok before as I'd already identified phone with Setool before using DB and only after using DB it is now not seen. I did stage1 and stage2 ok earlier and completed it but later decided to do a full flash so tried to enter security again and this is when it got stuck at 97%, would allow stage2 but even though saying "working" always TP fail.
If you reckon hardware is it possible to cause that by TP with DB then?

[multimedia box]

go to stage 2 not make stage 1 it will work.inch*****.
reply.

[FU_Too]

go to stage 2 not make stage 1 it will work.inch*****.
reply.
no, if I try just stage 2 although say TP connected/working it always times out cant do stage 2 either:(

[GSMLover2010]

no, if I try just stage 2 although say TP connected/working it always times out cant do stage 2 either:(

thats right dreambox cant do it............
use other box ..............................................
problem in pre loader ......
we are waiting ..........
update.........

[FullFLASHgSMPH]

yes tested



nnect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Warning : Aborted by user.

--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 2 start
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

[harim_1981]

If it stops in the 97% ...sure it flash chip damaged...just now changed and working fine.