is this a hardware problem??!!

[mansi]

i have this K800 [dead] when first time i attached it it was reading correct info look>>

[24/07/2008 19:59:42] User selected phone K800 using Test Point boot mode
[24/07/2008 19:59:42] Stage 1 started
[24/07/2008 19:59:42] 1) Turn OFF the phone.
[24/07/2008 19:59:42] 2) Connect the phone to DreamBox cable.
[24/07/2008 19:59:45] Boot Responce = 5A
[24/07/2008 19:59:45] Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
[24/07/2008 19:59:47] NOR Flash ID = 2019
[24/07/2008 19:59:47] OTP Status = LOCKED
[24/07/2008 19:59:47] OTP IMEI = 353996-01-******-*
[24/07/2008 19:59:47] OTP CID = 49
[24/07/2008 19:59:47] EROM Color = 4 : RED
[24/07/2008 19:59:47] EROM CID = 53
[24/07/2008 20:01:33] Hint : Now the probe might be disconnected
[24/07/2008 20:01:43] Processing ...
[24/07/2008 20:01:43] Stage 1 completed succesfully
[24/07/2008 20:01:44] Stage 2 start
[24/07/2008 20:06:16] Timeout detected
[24/07/2008 20:06:16] Error : Failed.

now after trying lots of times i get this info>>


-- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 2019
OTP Status = LOCKED
OTP IMEI = 353996-01-******-*
OTP CID = 49
Error : Failed.

what could be wrong??

thanks in advance.
BR
Mansi

[GSMLover2010]

if you can read again with Dreambox try with se*** and if box cant read info your flash ic is tamperd................
you can use search and see other logs in my posts....
BR
Gsmlover

[GSM Dream]

Hello!
Try to skip Stage 1 (if you have already done it).

[mansi]

i tried, could not manage to pass stage 2, i cant say `till i change flash chip.

thanks anyway
BR
Mansi