View Full Version : Advancebox.2.20.Inc.Crack-rev
Hi how can use it? i have ufs + mt box, how can unlock bb5 phones with that? what is the TP adapter? how can use it. Please post here any manual.
anhduy2004
07-27-2008, 12:46
I want to know
help me
and i want but who will show as :D Now tested the phone is read and backup but i haven't locked phone for test.
I connect the phone to usb and Fbus and work BUT haven't locked phone.
and i want but who will show as :D Now tested the phone is read and backup but i haven't locked phone for test.
I connect the phone to usb and Fbus and work BUT haven't locked phone.
see working snap shots we are working on UFS only TP too..
http://www.gsmhosting.net/vbb/showpost.php?p=3516803&postcount=256
Yes i have the cable but my question it's realy craced? with this software i can unlock any phone without TP? i can try because i haven't locked phone. But if it's tru we don't need from Mt box :D
Here you can find the TP schematic. Just create one simple cable.
GuaR FORUMs
http://www.google.com/search?sourceid=navclient&aq=t&ie=UTF-8&rlz=1T4GGIH_enBR236BR236&q=GuaR+FORUMs
albert maren
08-12-2008, 17:22
can this work with the original testpoit cable for advance-bb5 work with ufs ?.
can this work with the original testpoit cable for advance-bb5 work with ufs ?.
Only working with FBUS cables or USB, no TP cable.
http://www.gsmhosting.net/vbb/showpost.php?p=3522619&postcount=24
Advance-Box
08-12-2008, 21:06
@ALL
TP Unlocking will never work without original adapter...
The reason is very very simple...
Here are the facts:
1. Nokia NOR Flash chip is running @ 66Mhz
2. UFS Box maximum Speed is just 12mbps (USB 1.1)
So ask yourself how can your very slow RX/TX from UFS box
directly communicate with very fast 66Mhz NOR Flash???
Also, my best of luck to everyone trying to make homemade TP
adapter using that schematics that tells you to connect the 3.3v RX/TX
lines from UFS to the 1.8v CLK and ADX of the NOR flash chip. I hope
you will spend some time reading pdfs about 1.8v flash chips. If memory
serves me right, the Vmax is 1.9v and anything above 2.7v may cause
irreversible damage to the chip. Also, don't forget that the TP Pins are
connected to the RAP chip as well which is also running on 1.8v. So best
of luck cooking your phones!
Please do not forget to thank that "genius" who created that schematics
when you start to smell something burning ;o) ...
Read PM, Read Security Code etc etc... they are probably working great.
But I also guarantee you that you can achieve the exact same operations
using your original UFS software and with the bonus that you do not need
to crack them.
yup,TP is not working without original adapter .........
yup,TP is not working without original adapter .........
Software cracked 100% All service funtons working, with UFS+Vspec, or UFS + FBUS cables only or USB only, TP unlock cables not working.
http://www.gsmhosting.net/vbb/showpo...9&postcount=24 (http://www.gsmhosting.net/vbb/showpost.php?p=3522619&postcount=24)
Software cracked 100% All service funtons working, with UFS+Vspec, or UFS + FBUS cables only or USB only, TP unlock cables not working.
http://www.gsmhosting.net/vbb/showpo...9&postcount=24 (http://www.gsmhosting.net/vbb/showpost.php?p=3522619&postcount=24)
yeah...sofware are 100% working,but not in TP unlocking.
albert maren
08-14-2008, 15:01
so it means that the soft can not unlock is only to do service check huh.
What did U think, that other BOX will do all unlock stuff w/o org TP adapter???????
Ask Yourself is that Ideal for market, or all Box makers or designers should make all box'es on same idea???
Think Twice
lp
ahmed nokia
10-03-2008, 01:54
@ALL
TP Unlocking will never work without original adapter...
The reason is very very simple...
Here are the facts:
1. Nokia NOR Flash chip is running @ 66Mhz
2. UFS Box maximum Speed is just 12mbps (USB 1.1)
So ask yourself how can your very slow RX/TX from UFS box
directly communicate with very fast 66Mhz NOR Flash???
Also, my best of luck to everyone trying to make homemade TP
adapter using that schematics that tells you to connect the 3.3v RX/TX
lines from UFS to the 1.8v CLK and ADX of the NOR flash chip. I hope
you will spend some time reading pdfs about 1.8v flash chips. If memory
serves me right, the Vmax is 1.9v and anything above 2.7v may cause
irreversible damage to the chip. Also, don't forget that the TP Pins are
connected to the RAP chip as well which is also running on 1.8v. So best
of luck cooking your phones!
Please do not forget to thank that "genius" who created that schematics
when you start to smell something burning ;o) ...
Read PM, Read Security Code etc etc... they are probably working great.
But I also guarantee you that you can achieve the exact same operations
using your original UFS software and with the bonus that you do not need
to crack them.
thanks for information