Realy i dont know what's this problem

[freeman2001]

i have k800 came for unlock i try to unlock it via cruiser it's dead

i try to repair it via dream it's block on 97% or teste failed what's happand


this full dss log


wbr

[c_ahmad79]

do it via tp method
if earror remain same
then full flash phone
and then try to repair gdfs via tp method

[GSM Dream]

Hello!
[28/07/2008 19:34:57] --- Writing firmware-----------------------------------------------------------
[28/07/2008 19:34:57] User selected phone K800 using Normal boot mode
[28/07/2008 19:34:58] 1) Turn OFF the phone.
[28/07/2008 19:34:58] 2) Connect the phone to DreamBox cable.
[28/07/2008 19:34:58] Boot Responce = 5A
[28/07/2008 19:34:58] Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
[28/07/2008 19:35:00] NOR Flash ID = 897E
[28/07/2008 19:35:00] OTP Status = LOCKED
[28/07/2008 19:35:00] OTP IMEI = 357315-01-746991-8
[28/07/2008 19:35:00] OTP CID = 51
[28/07/2008 19:35:00] EROM Color = 4 : RED
[28/07/2008 19:35:00] EROM CID = 53
[28/07/2008 19:35:02] Sending File System Certificate ...
[28/07/2008 19:35:02] Error : Failed.
This is hardware issue.

[freeman2001]

Hello!

This is hardware issue.


if it's hw pb the phone for unlock only and dead when i try to unlock it via cruiser that's all




wbr

[space1]

Laser:

that error can be caused by different problems. lets see all of them

1. user has run "executor" application, which was not deleted after "new altbypass unlock".

solution -
select correct model
on settings check only "use preloader security bypass".
execute any operation, say : "read flash"

2. main software somehow has been damaged (cause of free tools, etc)
solution -
select correct model
on settings check only "use signed mode".
add to firmware area only main part of firmware
press flash (use com/ufs or dcu60 with "2+5" keys if phone not connecting with "C" )
after that, phone should show identify normally.

I have problem with k800 cid 53, stoped 97%-dream box, solved with MT-SE only flash.

[freeman2001]

@GSM Dream

if this phone hw problem

i reflashed it via cruiser and now the phone powred on
but it's loocked

i try many times via tp but no chance where is the problem

i passed this times K800 it's go prefect but this the same problem
-- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357315-01-746991-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357315-01-746991-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357315-01-746991-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357315-01-746991-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357315-01-746991-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Hint : Now the probe might be disconnected
Processing ...
Warning : Aborted by user.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357315-01-746991-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Hint : Now the probe might be disconnected
Processing ...
Warning : Aborted by user.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357315-01-746991-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Hint : Now the probe might be disconnected
Processing ...
Warning : Aborted by user.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357315-01-746991-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357315-01-746991-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Hint : Now the probe might be disconnected
Processing ...
Warning : Aborted by user.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

are u shoure this phone hw problem !!
i dont think's sir


wbr

[GSM Dream]

Stage 2 start
Timeout detected
Wrong or damaged testpoint pin.

[freeman2001]

Wrong or damaged testpoint pin.
hi sir


u see only stage 2 i try to baypass it directly to Stage 2 because stage 1 all the times saide failed so whay !

when i try to read info via teste point it's accepte Teste point and show me all info so where is the problem

ps
the phone now power on and work prefect but it's loocked


wbr