Plz Help Me In My Sagem 220x

[foufou34]

i have sagem 220x dead after write eeprom of 220v
hwo to solve this problem

[InfinitySupport]

What exactly you have tried to do ?

[foufou34]

What exactly you have tried to do ?
after unlock i found big conter 380min
i c'ant reset conter
then i try withe many eeprome and rest the same
then i write eeprome repaire in support area for 220v

the telephone d'ont power on

[foufou34]

is there solution.......................................... ..........................

[InfinitySupport]

There is a solution:
1. always read text in support area to avoid dead phones
2. post here unlock operation log and probably we will help you to repair phone.

[foufou34]

COM24 [VCP0] selected
Device: Sagem-my220x
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
230400
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220x_eeprom-sta_20080729-200606.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220x_eeprom-sec_20080729-200614.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220x_eeprom-complete_20080729-200618.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 61 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678

[foufou34]

all OK
and TRY withe restor backup eeprome but the same probleme
phone not power on

[InfinitySupport]

I need to see initial ulock operation log to check original firmware version

[foufou34]

i d'ont have the initial log
i have the backup eeprom


http://www.4shared.com/file/57090546/5a697234/backup220x.html?dirPwdVerified=55d99749

[foufou34]

how to repaire this bug..............
infinity team please add repaire bouton and fichier eeprome 220x in support area

[InfinitySupport]

Hello,

It is NOT a bug !
It is a result of your ignorance of text in support area. Here is a text that you simply ignored: DO NOT use these files if you do not know what you need to do !
Why you ignored that text ?

Please, read message #8 in current thread, there is an information there for you with instruction what to do.

[foufou34]

this is the original log

log opened: [29/07/2008 11:25:27] ====
Application: C:\Program Files\InfinityBox\Pana01\Pana01.exe
Loading data, wait...
[Infinity Box] v1.44
S/N: 395B:010F
Wait...
Current model: Coral-200
Ready
Current model: Sagem-my220x
COM24 [VCP0] selected
Device: Sagem-my220x
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
921600
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-sta_20080729-112617.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-sec_20080729-112648.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-complete_20080729-112651.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 57 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678


this log for the first operation in that moment phone power on but conter 350min

[foufou34]

any way to repaire this probleme withe infinity box
no repaire
no make flash
then how to solve any probleme
i have 2 boutton:
1-read flash
2-read eeprom

read ok........write no......repair no..........dead OK

[foufou34]

infinity team we need update for pana01 220x.220v.......in next update is Very important to add repaire and write flash for this model
and thx..

[InfinitySupport]

Are you sure that you have posted original (first) unlock operation log ?
I can not see phone firmware version in log.

[umberver]

PLz i have
Sagem My220x / AX2007CS1
France orange :355532020350727 / 254023639
F179/ 08 N2

Do you know the Unlock Code
thx in advance

umberver

[InfinitySupport]

@umberver
You must respect forum rules and post your messages in correct forum section !

[foufou34]

yes i'am sure

We have now bought another phone for costumer

And still have the dead phone

[InfinitySupport]

Hello,

read flash from your damaged phone and send to InfinityBoxSupport@gmail.com
We will check it but there is no any warranty that it will be success

[foufou34]

all is ok i send the backup flash is your email

[ovengsm]

i try to write eeprom MY220v in to MY220x phone dead !!!
try to restore ! and phone dead ! hou to repair !?????:confused:

[lovist2]

Hey, I have a nice to share about how to remove phone code my220x and my150x... because unlock couldn t clear it....

1. READ PHONE s EEPROM from service tab

2. COME TO FLASH TAB and SELECT EEPROM and LOAD THE COMPLETE EEPROM that u backup...

3. MAKE SURE THAT RESET DEFAULTS IS SELECTED ON THAT SEME TAB....

4. PRESS WRITE and petient until process finish......and you will no longer see phone code

[InfinitySupport]

We will try to add separate Reset defaults button for this model.