PDA

View Full Version : please help ZXN95 pinout...!

xxolaa
07-29-2008, 18:30
please help ZXN95 pinout...!
xxolaa
07-29-2008, 18:32
zxn 95 soket 1*12 help rx tx gnd...... please
InfinityHelp
07-29-2008, 20:06
hello!

is this phone is based on MT62xx ?
you can check this without phone disassembling by typing *#0044# and push green key.
if you will see "language set: english" it is mt62xx
xxolaa
07-30-2008, 00:14
hello!

yes is this phone is based on MT62xx
please RX and TX and GND pinout 1*12 socket
xxolaa
07-30-2008, 10:31
yes is this phone is based on MT6225
please RX and TX and GND pinout 1*12 socket

http://kepfeltoltes.hu/view/080730/DSC12_www.kepfeltoltes.hu_.jpg
InfinityHelp
07-31-2008, 11:27
hello!

in this case pinout can be founf in 5 minutes using multimeter.
measure voltages on all phone pins and detect tx/rx by voltage 2,7-2,9 volts