PDA

View Full Version : K530 dead GDFS success via TP DBSS


swensonb
07-30-2008, 08:37
just for reference
this unit came to me by a fellow co tech dead ang GDFS problem when INFO on DBSS...

after disassembling the phone here's the image for TP area

http://i32.photobucket.com/albums/d35/swensonb/Picture004.jpg

here's the LOGS...

--- Reading Info---------------------------------------------------------------
User selected phone K530 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353500-02-452985-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Starting CS Loader GDFS Service ...
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353500-02-452985-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353500-SWENSONB-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353500-SWENSONB-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Warning : Aborted by user.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353500-SWENSONB-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353500-SWENSONB-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353500-SWENSONB-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K530 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Entering Security Bypass mode ...
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ...
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353500-SWENSONB-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 2380DC642590976E
Finalizing ...
Stage 2 completed succesfully
Done.

--- Unlock and Repair----------------------------------------------------------
User selected phone K530 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ...
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353500-SWENSONB-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 2380DC642590976E
Reading GDFS...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Unlocking ...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Generating GDFS...
Writing GDFS...
Done.

http://i32.photobucket.com/albums/d35/swensonb/k530_2.jpg


http://i32.photobucket.com/albums/d35/swensonb/pix004.jpg

credit goes to boss bruce for the test unit. bogs for helping hand for the stubborn stage 2 TP and boss alfox for the encouragement.

regards
swensonb

Softking
07-31-2008, 08:13
do u have any easy test point for k530 i cant do this this test point please reply me

infitm@yahoo.com

Ian
08-22-2008, 11:12
Dear Sir,
May I know which pin is for TP stage 2 as TP stage 1 is pin number 2.

Please advice me please....

May I know once I sucessful done the TP stage one and do the TP stage 2 tomorrow?

Thank you very much..

Best Regards
Ian

swensonb
08-22-2008, 16:32
@Ian
it depends on your IC variant mine is on PIN 15

and just a tip while on TP process stage 2 try to press ON/OFF switch while on TP process [stage 2]
works for me all the time

regards
swensonb
DBSS USER

v11
09-17-2009, 08:02
Need file GDFS for K530i...... Please




Thank you.

mfaraz
09-27-2009, 06:51
is this free ya

how much log$ for tp