View Full Version : can c168i be connected/flashed/unlocked?
I have one piece frorm ATT, it is UART Locked, I cant connect to it thrrough infinity, is there something I should know ?
I would like to unlock it and convert it to 900MHz
InfinitySupport
07-30-2008, 14:19
Hello,
There is a problems with latest c168i AT&T, we will try to make something ASAP.
alamgir80
10-17-2008, 07:57
I have one piece frorm ATT, it is UART Locked, I cant connect to it thrrough infinity, is there something I should know ?
I would like to unlock it and convert it to 900MHz
same problem with me. pls help
..STBSL..
10-17-2008, 08:47
Use Moto T191 Cabel or original 261 cable. Press SP Unlock Batton Try This..................
Hello,
There is a problems with latest c168i AT&T, we will try to make something ASAP.
sounds good...i hope dis wil add asap
alamgir80
10-17-2008, 09:02
Use Moto T191 Cabel or original 261 cable. Press SP Unlock Batton Try This..................
i'm try with infinity X60, moto T191, moto C261, but not connect with phone
alamgir80
10-17-2008, 12:21
only for work reset user code
COM11 [Serial2] selected
Model: Motorola-C168i
Action: user code
Device must be POWERED-ON !
Connecting, wait...
Phone connected. Working...
code: 1234
Finished
UnLoCkit
10-17-2008, 12:26
a lot of c168i here..
hope infinity team work that ASAP!!
thank's Infinity Team
harim_1981
10-17-2008, 12:55
yes wait for the updation for it.....until new updation u cant unlock this phone...
rashel.com
10-19-2008, 12:57
infinity box can't unlock 168i try smart clip
JHUN PANABO
10-19-2008, 14:17
Hello,
There is a problems with latest c168i AT&T, we will try to make something ASAP.
sounds good sir,
hopoe also the modification to 900/1800 band.
Jr Telecom
10-19-2008, 17:42
Not supported yet...
wait till update support of infinity,mss,smart-clip.
thanks for asure infinty team.
alam_sabai
10-23-2008, 14:46
pls post any reply from supporter
InfinitySupport
10-23-2008, 14:58
@rashel.com
It looks like you don\'t understand what you talk about.
@alam_sabai
What kind of reply you want to see ? Please, ask more detailed question and we will be glad to give you an answer.
@all
There is a problems with latest c168i AT&T, we will try to make something ASAP but it's little bit not so easy as we expect
nexxus63
10-24-2008, 00:54
= log: [21/10/2008 18:33:05] ====
COM30 [VCP0] selected
Device: Motorola-c168i "advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
loading...
Boot done
Check connection...
Check connection done
Set baud...
812500
Set baud done
Check hardware...
flash: 208810FFFFFFFF:20881000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
version sw: 1220-000
version sw: SCA-7-
Check hardware done
Read data...
reading Motorola-c168i_eeprom_calibration-1...
file saved: C:\Archivos de programa\InfinityBox\HModule\Motorola-c168i_eeprom_calibration-1_20081018-120307.6AE.bin
Read data done
Check data...
warning: Probably wrong model selected,
Do you want to continue ?
model selection confirmed by user
error: not locked or unknown eeprom
Check data done
Writing...
......data prepared Ok
flash: 208810FFFFFFFF:20881000000000
Write: eeprom
Writing done
Finished, time used: 84 sec
Remove/Install battery now
nexxus63
10-24-2008, 19:52
I am working for the saver because of the failure and fix the connection of an ok
NEXXUS63
u do something to board to make connection to uart locked att c168i, without mod no tool can connect to it.
= log: [21/10/2008 18:33:05] ====
COM30 [VCP0] selected
Device: Motorola-c168i "advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
loading...
Boot done
Check connection...
Check connection done
Set baud...
812500
Set baud done
Check hardware...
flash: 208810FFFFFFFF:20881000000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
version sw: 1220-000
version sw: SCA-7-
Check hardware done
Read data...
reading Motorola-c168i_eeprom_calibration-1...
file saved: C:\Archivos de programa\InfinityBox\HModule\Motorola-c168i_eeprom_calibration-1_20081018-120307.6AE.bin
Read data done
Check data...
warning: Probably wrong model selected,
Do you want to continue ?
model selection confirmed by user
error: not locked or unknown eeprom
Check data done
Writing...
......data prepared Ok
flash: 208810FFFFFFFF:20881000000000
Write: eeprom
Writing done
Finished, time used: 84 sec
Remove/Install battery now
How did you do it? Please Teach me!