need fllash file very urgent

[kamalakar]

sir sigmatel s1 flash file (flash_20080730-135648.B0M) need very urgent please help me

[mov009]

sir Sigmatel S1 Flash File (flash_20080730-135648.b0m) Need Very Urgent Please Help Me
Sand Your File In This Add:-mt62xx@gmail.com (-mt62xx@gmail.com) Infinity Team Upload Your File In Support Area.

AND YOU SERCH YOUR FILE SIGMATEL S1 FILE IN SUPPORT AREA IT IS AVABLE.

[InfinityHelp]

hello!

this is file name, here we cant see firmware version.
ussually CM create file with this name when flash is completely erased.
please try to find in logs what was original software version

[kamalakar]

thanks for replay

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:1203:000E
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18A59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18A59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18A59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18A59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18B09FA518B09FA518B09FA518B09FA518B09FA518B09FA5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\flash_20080801-104718.B0M.bin
Finished, time used: 1296 sec
Remove/Install battery now !

[InfinitySupport]

Hello,

There is no any firmware version found. It may be a result of damaged or completely erased flash chip.

[kamalakar]

how can i find fimware please help me

[InfinitySupport]

1. go to Infinity-Box support area
2. go to folder \\flashfiles\\ChineseMiracle\\Sigmatel

[kamalakar]

i was found 2 sigmatel s1 fimewares in support area i tryed with that fimwares no use

[InfinityHelp]

hello!

what was initial problem with this phone?

[kamalakar]

thanks for replay sir when i receive it was on with only sigmatel ofter complet formet set was dead

[InfinitySupport]

i was found 2 sigmatel s1 fimewares in support area i tryed with that fimwares no use

What do you mean \"no use\" ?
What is the problem exactly ?

[madhu_vizag]

hai good evening plz help i need G 11 china phone flash file. sw1: G11_PCB04_GPRS_MT6228_S02.MAUI_05C_W06_32.BIN
ver. sw2: MAUI.05C.W06.32, 00000000

[mov009]

hai Good Evening Plz Help I Need G 11 China Phone Flash File. Sw1: G11_pcb04_gprs_mt6228_s02.maui_05c_w06_32.bin
Ver. Sw2: Maui.05c.w06.32, 00000000


I Think This File Not In Support Area. What Is Your Problem ? And Why You Flashing The Phone ? Just Format Phone. Chinish Phone 90% Solution Format.