N95- white lcd after flash

[Supermen!]

After flash i have wite LCD .version of flash file is the same as telephone

Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v2.52
S/N: 0C5D:
Wait...
Device: Autodetect 6205-6227 NOR
Done
Loading file v.03...
editor_corrected_backup_flash[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_09.BIN]_20071213-122129_FULL_.B0M.bin loaded
identification#1 protocol ver: 04
ver. sw1: BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_09.BIN
ver. sw2: BR26_23.09, E71B427E
You have loaded file with security features enabled.
COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 11 sec
Remove/Install battery now !
COM3 ready
COM3 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:417E:0000
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.2C00C88F.[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_17.BIN_A22B CCFD].rpl

I flash it with
CM_Cect-P168_Nokia-N95_BR26_05C_PCB01_GPRS_MT6226_S01.BR26_22_10_16m_ En_Vn_Ru_Th.B0M
from support, it didn't help.I flash the same telephones many many times and I hasn't any problem ....

[InfinitySupport]

There is no two "the same" Chinese models.
The best way to get your phones never damaged is: always make flash backup.
Even if firmware version name is same it may be that it's different firmaware types.
It's Great Chinese Joke that the same firmware version name files has difference.

[Supermen!]

What I have to do ? I understand that I made mistake but how i can solve this problem ?

[mov009]

What I have to do ? I understand that I made mistake but how i can solve this problem ?

restore your backup eeprom file, in chinesh miracle folder,i hope your set is good condition.

[InfinityHelp]

hello!

you must flash your phone with original software version "BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_17"

[Supermen!]

hello!

you must flash your phone with original software version "BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_17"


Where i can find it ?

[mov009]

hear is your file in support area:-