View Full Version : Ndkia 6300 Flashing Problem
sunny_gsm
07-31-2008, 15:16
sir,
a ndkia 6300 having mt6226 cpu.is dead.I format it in safe mode first.
during this time it goes on with screen nokia showing in display.But after successfully formatting it is still dead.Then I do complete mode format.But result is same.
When I am going to write eprom it showa "Write Error :00E0000:0020000"
or error in some other address.
please guide me.
shahzaadbutt
07-31-2008, 15:20
give heat to flash chip
sunny_gsm
07-31-2008, 17:56
sir,
i have also write the eprom.but phone is still dead.
one more thing i nhave noticed that when the soft tells to "release power button",then if i release power button then process stops.
So for continuing any process I have to press the power button always.
sunny_gsm
07-31-2008, 18:16
my soft ver is : 0C0989DD_MIKI26_05C_PCB01_GPRS_MT6226_S01.V20_56.B IN_C3751197_20080731-211612.B0X.bin.
my soft ver is : 0C0989DD_MIKI26_05C_PCB01_GPRS_MT6226_S01.V20_56.B IN_C3751197_20080731-211612.B0X.bin.
bro there is no need to flash only format in safe mode then try to power on with this trick
first confirm that battery is ok and full charged
press on/off button strictly and long time ....during pressing on/of switch move the mother board up/down/left/write with other hand.....with this trick your set will be power on........tested 100%
sunny_gsm
08-01-2008, 09:07
bro there is no need to flash only format in safe mode then try to power on with this trick
first confirm that battery is ok and full charged
press on/off button strictly and long time ....during pressing on/of switch move the mother board up/down/left/write with other hand.....with this trick your set will be power on........tested 100%
sir I have already write this eprom:MIKI26_05C_PCB01_GPRS_MT6226_S01[1].V65_16_repair_eeprom_01.B0E
I think so your trick is not working.
may you please give the correct flash file & eprom file.
thanks for helping.
zinoubinabil
08-01-2008, 11:52
wrong section closed