adampurhawks
07-31-2008, 17:20
Hi Mates
Today something happened..which i never expected.
I got a phone named : CECT T590 with restart problem with/without sim.
I tried finding pinout with MC-Tool. but i was unable to find the pinouts..
Suddenly i remembered my nuclear bomb..(Infinity Box).
i started trying with some chinse cables i got from my reseller. i was trying on Com port..but nothing happned..after a while i tried on other side of RJ45 jack..and selected Com 12 in software as my box was installed on that port. and started reading the info...
after a while i was surprised..that the software was reading info..after a while again i clicked format FFS and again the magic was here ..the software started running..and everything was ok...
here is the log..I am also attaching picture of the cable named AT106 SAM G2 was written on it.i had done that phone..without any pinouts.
I dont know it was by chance or by magic..but i only know..the nuclear bomb (Infinity Box) had done the magic...
here is the log
COM12 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
chip: 0031:8D22:638C
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: MAUI.05C.W06.16
Version: MALATA26_05C_HW
detecting structure #2...
done
imei: 13579024681122
connection Ok
building list...
done
items to clear: 192
181 of 192 items cleared
building list...
done
2 items remains
Finished, time used: 346 sec
Remove/Install battery now !
:) Adampur Hawks :)
Today something happened..which i never expected.
I got a phone named : CECT T590 with restart problem with/without sim.
I tried finding pinout with MC-Tool. but i was unable to find the pinouts..
Suddenly i remembered my nuclear bomb..(Infinity Box).
i started trying with some chinse cables i got from my reseller. i was trying on Com port..but nothing happned..after a while i tried on other side of RJ45 jack..and selected Com 12 in software as my box was installed on that port. and started reading the info...
after a while i was surprised..that the software was reading info..after a while again i clicked format FFS and again the magic was here ..the software started running..and everything was ok...
here is the log..I am also attaching picture of the cable named AT106 SAM G2 was written on it.i had done that phone..without any pinouts.
I dont know it was by chance or by magic..but i only know..the nuclear bomb (Infinity Box) had done the magic...
here is the log
COM12 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
chip: 0031:8D22:638C
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: MAUI.05C.W06.16
Version: MALATA26_05C_HW
detecting structure #2...
done
imei: 13579024681122
connection Ok
building list...
done
items to clear: 192
181 of 192 items cleared
building list...
done
2 items remains
Finished, time used: 346 sec
Remove/Install battery now !
:) Adampur Hawks :)