register mercury anycool t618??

[saidgoren]

when power on the phone , phone give an error (register mercury)

if press no : anycool welcome screen always show.
if press yes: register tip: psn tool etc....

format whole flash chip and flash it by file from the support.

STANDARD_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_W08_12. bin is the original file.

STANDARD_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_W08_12_ _Hyundai_MP880_Type_M619+_16m_En_Ru_Fr_Es_De_Cn_Tr _Pt_Ar.B0M
this file is the one from the support.

now power on the phone, white screen


what should i do?

[saidgoren]

how to solve problem white screen chinesse phones?

[saidgoren]

i found the problem.

problem is eeprom.

there is no eeprom file in phone.
where can i find its eeprom...

[InfinitySupport]

You do not need to use any eeprom files.

C:\\Program Files\\InfinityBox\\Documentation\\ChineseMiracle\ \How_to_repair_White-screen_Black-screen.txt

[saidgoren]

chinesse miracle software gives an error message ''there is no eeprom files in phone''

phone was already working.

i format the whole flash chip.
then flash it.

i need eeprom. other option is useless lcd and cable working well.

[InfinityHelp]

hello!

if phone working normaly-do not write any EEPROM.
after you make complete format FFS- phone rebuild own eeprom itself

[saidgoren]

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:9C03:0007
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: STANDARD_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_W08_12. BIN
ver. sw2: MAUI.GEMINI.W08.12, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
operation terminated by user
error: critical error#1 during ffs size detection
error: can't detect eeprom/ffs address/size
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
Finished, time used: 42 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[InfinityHelp]

hello!

after this phone working normaly?

[saidgoren]

no phone is dead.

but i found the problem.

another phone is t828 phone was dead.
i flash it with flash[E880_KDI1DMCF10_E880_GPRS_MT6225_S00.01_3.BIN]_20080801-220023.B0M
phone is working but it is inserted sim card. phone says inser sim card.

i flas it with flash[E880_XZY1DMCF13_E880_GPRS_MT6225_S00.01_0.BIN]_20080802-105136.B0M
phone is white screen.

then i understood. problem is flash version.
so , i will find the same phone and read flash and writ it to these phones...


i archive all the phones firmware.
so if there is any dead phone , i will check my list. and repair the phone.
i backup everycoming phone.


FLYING F888 eeprom[H916C_MIC2_PCB01_GPRS_MT6225_S00.H916C_MIC2_2089_S ET_BT1_TV1_EN_FR_TR_PE_AR_V2_00.BIN]_20080805-112818.B0E
flash[H916C_MIC2_PCB01_GPRS_MT6225_S00.H916C_MIC2_2089_S ET_BT1_TV1_EN_FR_TR_PE_AR_V2_00.BIN]_20080805-115518.B0M

ANYCOOL T818 eeprom[E880_KDI1DMCF10_E880_GPRS_MT6225_S00.01_3.BIN]_20080801-212912.B0E
flash[E880_KDI1DMCF10_E880_GPRS_MT6225_S00.01_3.BIN]_20080801-220023.B0M

ANYCOOL T828i eeprom[X225B_PCB01_GPRS_MT6225_S00.LBN7K08_7_12_1_1T02M06 06_M401A_M.BIN]_20080805-223600.B0E
flash[X225B_PCB01_GPRS_MT6225_S00.LBN7K08_7_12_1_1T02M06 06_M401A_M.BIN]_20080805-230223.B0M

iPhone Tv - Cesim V30i eeprom[E880_XZY1DMCF13_E880_GPRS_MT6225_S00.01_0.BIN]_20080802-105535.B0E
flash[E880_XZY1DMCF13_E880_GPRS_MT6225_S00.01_0.BIN]_20080802-105136.B0M

NOKIA N99i5 eeprom[X225B_PCB01_GPRS_MT6225_S00.LBN8D02_7_12_1_2T03M04 10_M401A_M.BIN]_20080807-151028.B0E
flash[X225B_PCB01_GPRS_MT6225_S00.LBN8D02_7_12_1_2T03M04 10_M401A_M.BIN]_20080807-154610.B0M

TV MOBİLE D2000i eeprom[H916_MIC2_PCB01_GPRS_MT6225_S00.H916_MIC2_2099_SET _BT1_TV1_EN_FR_TR_PE_AR_V1_05.BIN]_20080805-152855.B0E
flash[H916_MIC2_PCB01_GPRS_MT6225_S00.H916_MIC2_2099_SET _BT1_TV1_EN_FR_TR_PE_AR_V1_05.BIN]_20080805-160146.B0M
eeprom[H916_MIC2_PCB01_GPRS_MT6225_S00.H916_V1_00.BIN]_20080806-150357.B0E
flash[H916_MIC2_PCB01_GPRS_MT6225_S00.H916_V1_00.BIN]_20080806-153414.B0M

[ozcan28]

abi bana FLYING F888 telefonun eepron ve flash file ni gonderebilimisin

[KUBAT1]

when power on the phone , phone give an error (register mercury)

if press no : anycool welcome screen always show.
if press yes: register tip: psn tool etc....

format whole flash chip and flash it by file from the support.

STANDARD_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_W08_12. bin is the original file.

STANDARD_PCB01_GPRS_MT6225_S00.MAUI_GEMINI_W08_12_ _Hyundai_MP880_Type_M619+_16m_En_Ru_Fr_Es_De_Cn_Tr _Pt_Ar.B0M
this file is the one from the support.

now power on the phone, white screen


what should i do?


I have a same phone with same problem. I downloaded all similar firmware from support, they solve the problem but keys mismatch, call1 stayed TV and TV stayed Call1, then up and down keys exchanged!! :( , pls urgent need this firmware,if anybody has the same firmware pls upload, or if we upload here this firmware can you infinity team fix it..
the problem here when turn on the phone display only show this alert:
"Register tips:Please wait the PSN tool report succeed,plug out the cable and rerstart phone"

[InfinityHelp]

hello!

currently we are working under "Register mercury" problem.
solution will be released nearest time.

[KUBAT1]

hello!

currently we are working under "Register mercury" problem.
solution will be released nearest time.

what about fixing EPROM IMEI reset itself??? tooo long we wait.. :mad:

[InfinityHelp]

what about fixing EPROM IMEI reset itself??? tooo long we wait.. :mad:

http://www.gsmhosting.com/vbb/showpost.php?p=3687118&postcount=2

[KUBAT1]

hello!

currently we are working under "Register mercury" problem.
solution will be released nearest time.

today I got one more Anycool T618. It says Register Mercury, I am using v2.66 and I did all works but still register mercury? have you ever worked about this problem?
Regards..

[InfinityHelp]

today I got one more Anycool T618. It says Register Mercury, I am using v2.66 and I did all works but still register mercury? have you ever worked about this problem?
Regards..

hello!

yes, working under this problem too

[KUBAT1]

nice! heppy news, hope there is some progress?:)

[BesTCooL]

hello!

currently we are working under "Register mercury" problem.
solution will be released nearest time.

any news for this problem ?

[MR PROTEC]

yes we need psn repair
this 'll be great update ...coz days that we have trouble with psn we west more time try repairing it
but almost not fixed tottaly


keeping your hard work team

br

[BesTCooL]

yes we have general mobile psn repiar but dont have others models ı think infinity team can make this solution..

[BesTCooL]

any news now ı have anycool D4000 after format same problem infinity team any news

[BesTCooL]

any news ?????????????????????????????????????????????????? ?????

[InfinitySupport]

any news ?????????????????????????????????????????????????? ?????

http://forum.gsmhosting.com/vbb/showthread.php?t=612977

[bad_signal]

Hi
if ur phone just show register mercury and work very well
there is no harm
but if not
just unlock the phone and it will be ok
br