One CPU (MT6226) Double IMEI..?

[LoveLess]

hi all and supporters..

i have anycool t818 that it has one cpu mt6226 and has double imei..and on pcb only one pinout... rx tx gnd.. is this possible..?

[.::BHATTI::.]

well ............ is it double Sim and both working at same time ???????????????

[LoveLess]

well ............ is it double Sim and both working at same time ???????????????


yes.. one of them (imei) is blacklisted... sub imei...


thanx for ur reply...

[.::BHATTI::.]

well if u have chked that pcb has inly one Cpu .. than ther would not be 2nd rx/tx .... but how can it be reached then

[ezzis]

hi all and supporters..

i have anycool t818 that it has one cpu mt6226 and has double imei..and on pcb only one pinout... rx tx gnd.. is this possible..?

Yes,it is possible.Anycool T818 TV,Bluetooth are 2 versions now.My Supplier in China confirmed it.One is standart 2 cpu version and last is single cpu version.Single CPU version price is 15$ less.

[LoveLess]

excuse me mates.. . phone has 2 cpus... one of them (mt6318a) is little i couldnt see it..

[ezzis]

excuse me mates.. . phone has 2 cpus... one of them (mt6318a) is little i couldnt see it..
it is not a cpu :(
______________

[ezzis]

Another dual sim dual standby single cpu phone-ZTC F16B.
2 sim working simultaneously
see picture

[.::BHATTI::.]

yes i heard it normally this kinda features ( one Cpu dual sim ) is usuallly in Mt 6225 based processor ...........i dont know what tech is this .. but there must be anything dual which makes it dual sim .. like flash ic .. network area or what??????

[alamgir80]

Action: read/check detailed information
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:BF03:0005
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.7DE3E6A9.[V6S_PCB01_GPRS_MT6225_S00.V6S_V3_3_2_0222_SM.BIN_E 78DC533].rpl
====================
New firmware detected:
V6S_PCB01_GPRS_MT6225_S00.V6S_V3_3_2_0222_SM.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 7DE3E6A9
identification#1 protocol ver: 04
ver. sw1: V6S_PCB01_GPRS_MT6225_S00.V6S_V3_3_2_0222_SM.BIN
ver. sw2: V6S_V3.3.2_0222_SM, CC3A7218
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
.....................
detect standard fat location pass #1...
.................................................. ..
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
detecting ffs structure pass 2...
.....................
detect standard fat location pass #1...
.................................................. ..
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #2 detected ok
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_7DE3E6 A9_V6S_PCB01_GPRS_MT6225_S00.V6S_V3_3_2_0222_SM.BI N_E78DC533_20080612-151915.B0X.bin
Finished, time used: 64 sec
Remove/Install battery now !

[InfinitySupport]

@LoveLess
1. read flash from your phone
2. send backup file to InfinityBoxSupport@gmail.com
VERY IMPORTANT: check both imei\'s by *#06# and include both imeis in your mail together with flash file so we will be able to check everything

[InfinitySupport]

@LoveLess
Please, download this software: www.infinity-box.biz/download/public/ChineseMiracle.rar
use \"method-3\"
you will be able to select imei #1 or imei #2 for repair

Waiting for your results.

[InfinitySupport]

Any luck with double imei repair ?

[ezzis]

Any luck with double imei repair ?
Yes.
Model :Louis_*******_XIII (mt6225)
Dual sim dual stanby -mono CPU imei 2 repaired successfully.
Both imeis shown on screen before and after repair.
COM4 [VCP1] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: imei
imei write method: mode-3
imei write channel: imei #2 for dual sim/mono-CPU
new imei: 3613******xx651
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:7B03:000B
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI _W08_12.BIN
ver. sw2: MAUI.GEMINI.W08.12, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[TOPWISE25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI _W08_12.BIN]]...
file saved: D:\GSM\flash_files\Louis_*******_Louis_XIII\eeprom[TOPWISE25_GEMINI_PCB01_GPRS_MT6225_S00.MAUI_GEMINI _W08_12.BIN]_20080805-034846.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
4 step(s) required to finalize
Patch required data Done
Special operation...
Special operation Done
Write...
flash: EC257E25082501:18E59F00000000
Write: eeprom
Write Done
Finalization...
Finalization Done
Finished, time used: 121 sec
Remove/Install battery now !
Thank You Infinity Team!:)

[kirpiksk]

hi bro

your see link

http://www.gsmhosting.com/vbb/showthread.php?t=561244

[goherabbas]

thankss...............................

[DualSimCell]

Hi All,
I have tried everything i know to write 2nd imei to K630i dual sim MT6225, single CPU, but just can't get it, and ideas?

[LoveLess]

Hi All,
I have tried everything i know to write 2nd imei to K630i dual sim MT6225, single CPU, but just can't get it, and ideas?

hi..

did u try to format complete ffs..?

[DualSimCell]

LoveLess,
You're a genius bro....worked on the first try.....note to others...try format ffs, write second imei mode 3 and then first imei mode 1.....works like a charm....