Lobster 544 SUCCESSFULLY UNLOCKED

[alamgarh]

I HAVE UNLOCK TODAY ONE MORE Lobster 544.
LOG BELOW.




COM7 [VCP0] selected
Device: Lobster 544
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: unlock
unlock method: standard
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6219:8A01]...
CPU: MT6219
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: B0001D00000000:B0001D00000000
flash: Sharp Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
.
detection phase #2...
..............................................
detect device identification#1 finished
identification#1 protocol ver: 01
ver. sw1: MP500_UK_PCB01_GPRS_MT6219_EV.MP500_W05_20_MP_V53. BIN
ver. sw2: MP500.W05.20.MP.V53, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[MP500_UK_PCB01_GPRS_MT6219_EV.MP500_W05_20_MP_V53. BIN]]...
file saved: C:\Program Files\InfinityBox\MModule\backup_eeprom[MP500_UK_PCB01_GPRS_MT6219_EV.MP500_W05_20_MP_V53. BIN]_20080812-182539.9AE.bin
flash: B0001D00000000:B0001D00000000
Backup required data Done
Patch required data...
detection procedure, wait...
detection procedure completed
Patch required data Done
Special operation...
extra method (fixed) in progress...
Special operation Done
Write...
flash: B0001D00000000:B0001D00000000
Write: lock-area-3
flash: B0001D00000000:B0001D00000000
Write: eeprom
Write Done
Finalization...
Finalization Done
Finished, time used: 114 sec
Remove/Install battery now !

[Infinity-Box]

thankyou for your good test result

[ashrafi580]

thankyou for your good test result


please tel me the easy way to unlock the lobster 544 user security or phone code. how to unlock sp lock.

whenever i tried to unlock it it says that restart the phone with a smart sim
and enter unlock codes but it doesn't show any menu to enter unlock codes.

[InfinitySupport]

Hello,

How to write flash (upgrade/downgrade firmware, change language):

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Flash" page and load required files
8. press "Write" button and follow instruction given by software


How to read flash:

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. press "Read flash" (or "Read full flash") button and follow instruction given by software


How to unlock (remove sp-lock, provider lock etc.):

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. press "SP-Unlock" button and follow instruction given by software


How to reset/format ffs (reset setting to default values, repair freez/restart etc.):
- at first try to make "safe format" (if this option exist)
- if "safe" option is not works try to make "complete" format (if this option exist)

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. select format mode "safe" or "complete" (if mode is available)
9. press "Reset" or "Format" button and follow instruction given by software

[mukasa shuaib]

i tried to unlock 544 but asked for NP code, after entering 3344 it asks for master code, any solution?

[InfinitySupport]

i tried to unlock 544 but asked for NP code, after entering 3344 it asks for master code, any solution?

Hello,

Did you tried to make "read code" operation ?
What MModule software version you have used ?