View Full Version : Ericsson 10 power off
Ericsson T10 power off when find network or make call.
Ii's not PA (AND630), i change iy many times :(((
Not Power IC...
????
themobileking
10-02-2002, 15:20
battery???
Dear You.....
I need help with my T10s dead phone, I had been try
with much ericsson software the software can detect my phone
ID like version,imei,etc but the phone cant power on please help me.
for help and solutions thank you somuch.
best regards,
gafyd45
hi all..just reball the DSP or if it is not BGA rehot it by pressing with tweezers on it..mostly it works..__jero__
Pandemonio100
10-14-2002, 19:46
For Mike727 have you tried to upload eeprom whit one good and flash phone?;)
for mike727
check the antenna connector, there are two contacts and they should not touch each other
because when is shorted to ground it will take lots amount of power for tx/rx
hope this help
StudioGSM
12-22-2002, 21:41
Yes, check the battery. Clear precisely battery connections.
mate you need to do hardware mod,where the batt pads are on the pcb yu need to solder 3 pads
common fault