!can" Imei Repair Chinese Iphone But 5 Of 7 Ok !!!!help

[ktienda]

I HAVE

7 CHINESE IPHONE

I REPAIR IMEI OK IN 5 BUT I "VE 2 PCS THAT CANT DO IT


LOOK

THIS SAY WHEN I CHANGE IMEI OK

Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: MTK6226_06a_HW
Software version: MAUI.06A.W06.40.F1"
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 355256060035480
imei write method: mode-1
new imei: 350338355378647
imei verified Ok
Finished, time used: 5 sec
Power off phone now !






BUT IN OTHER 2 SAY


Action: imei
Model: Autodetect 6228, 6230 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: MTK6226_06a_HW
Software version: MAUI.06A.W06.40.F1"
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 135790246811220
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono-CPU
new imei: 350448011234561
imei verification failed
Operation failed !
Finished, time used: 4 sec
Power off phone now !



OR



Action: imei
Model: Autodetect 6228, 6230 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: MTK6226_06a_HW
Software version: MAUI.06A.W06.40.F1"
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 135790246811220
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono-CPU
new imei: 350448011234561
imei verification failed
Operation failed !
Finished, time used: 4 sec
Power off phone now !


WHAT CAN I DO ???

[InfinityHelp]

hello!

why you set 6228, 6230 MCU in last 2 samples?
set it back to 6205-6227 NOR

[ktienda]

hello!

Why You Set 6228, 6230 Mcu In Last 2 Samples?
Set It Back To 6205-6227 Nor



I Set It For Test

But If I Select 6205, 6227 Mcu Show The Same Error!

[ktienda]

and ????? ...........

[InfinityHelp]

hello!

try IMEI change method 2, 3
what result do you get?

[ktienda]

hello!

try IMEI change method 2, 3
what result do you get?

http://img135.imageshack.us/img135/7269/metodo2kd2.jpg

[ezzis]

try to make format ffs safe or complete and repeat imei procedure.
I solved this problem for other phones model -Sciphone i68,3 of 10 pieces had problems for imei repair.

[InfinityHelp]

hello!

also please amswer what you get for IMEI writing mode-3 ?

[ktienda]

hello!

also please amswer what you get for IMEI writing mode-3 ?


MODE-3

COM290 [USBSER000] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "repair imei"
imei write method: mode-3
imei write channel: imei #1 for dual sim/mono-CPU
new imei: 350448011234561
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !

[ktienda]

AND WITH THE FBUS CABLE

SERIAL


METOD 3

http://img170.imageshack.us/img170/1585/metodo3ktiendazc0.jpg


COM3 [VCP4] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "repair imei"
imei write method: mode-3
imei write channel: imei #1 for dual sim/mono-CPU
new imei: 350338354693731
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:52C1:F8E2
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
slowest
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
error: no any expected answer: wrong answer after chip cfi request
flash: 01227E22202200:2AEA0000000000
flash: Amd PL127J D 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Archivos de programa\InfinityBox\ChineseMiracle\backup_securit y\id.B1F0F36E.[MTK6226_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_ F1.BIN_B874FD0F].rpl
====================
New firmware detected:
MTK6226_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_ F1.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: B1F0F36E
identification#1 protocol ver: 05
ver. sw1: MTK6226_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_ F1.BIN
ver. sw2: MAUI.06A.W06.40.F1, F0028B47
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[MTK6226_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_ F1.BIN]...
file saved: C:\Archivos de programa\InfinityBox\ChineseMiracle\eeprom[MTK6226_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_40_ F1.BIN]_20080823-195815.B0E.bin
flash: 01227E22202200:2AEA0000000000
Backup required data Done
Patch required data...
imei is not detected !

What to do:
1. Power-On phone
2. wait 20-30 sec
3. Power-Off by "Power" button, don't remove battery !
4. Repeat "repair imei" procedure again
If imei can't be detected:
1. make "complete" ffs format
2. Power-On phone
3. wait 20-30 sec
4. Power-Off by "Power" button, don't remove battery !
5. Repeat "repair imei" procedure again
If imei can't be detected: read flash and send to support: mt62xx@gmail.com

Patch required data Fail
file saved: C:\Archivos de programa\InfinityBox\ChineseMiracle\system_log_B1F 0F36E_MTK6226_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W 06_40_F1.BIN_B874FD0F_20080823-200131.B0X.bin
Finished, time used: 1466 sec
Remove/Install battery now !

[InfinityHelp]

hello!

have you followed advice give by program & mr. ezzis ?
complete format, power On phone, wait 20-30sec, power off mobile and repeat IMEI-3 procedure?

[InfinitySupport]

@whitt1234
Your offtopic message was deleted.
Here is Infinity-Box support forum but not discussion about anything else.
Just for your information: Infinity-Box is The Most Powerful software to repair Chinese models.