SL75 not power off

[michel.tissier]

Hi , i just revive a sl75 (amd, not intel) with papua and dbss , but now i have a problem the phone not power off , hang on last screen , i try to flash with winswup32 flasher but still the same , please if anybody have an answer, i appreciate very much
thanks ;)

[imran_qasim]

Hi , i just revive a sl75 (amd, not intel) with papua and dbss , but now i have a problem the phone not power off , hang on last screen , i try to flash with winswup32 flasher but still the same , please if anybody have an answer, i appreciate very much
thanks ;)

i got the same problem i used DBSS to format it , after that it power on but when i press power off phone hangs there , any solution is welcome.
by the way i just format A: not flash it and it powered on before it was just blinking.



Take Care
ENJOY

[paullovinicius]

check this procedure

http://forum.gsmhosting.com/vbb/showpost.php?p=2314151&postcount=16

you can use winsup to upgrade to v35 version or use dbss.

[michel.tissier]

what are the steps ?? because i try do what you say but no response , still the same.
the solution is upgrade tu v35 ,i use winswup32 with the flash from your link and give my an error, because the lang version and others don't corresponds , after i try dbss with two diferent flashes from the support but nothing. please i know you can helpme paullovinicius

[paullovinicius]

upgrade your phone to v35.
select right flash from dbss by language pack number.
flash with "that options" disabled.
after this, get Winsup 4.18 from http://s75.siemens-club.org/s75soft.html - directlink http://s75.siemens-club.org/files/soft/winswup418.rar

and

SL75_2_ua-retail_35_0330.xfs from http://allsiemens.com/flash/xfs/SL75-sl75_sw35_xfs.zip.htm

Click in FIle-Open..
File type: select XFS and select the XFS file.
In Serial Config, select your serial port and right speed(Can you wait? Select 115k).
Check Skip in Pre-Check, click in START and press POWER in phone.
Wait few minutes and your phone will be ok.

If this XFS doesn't have your languages, you need to backup it first using an app like SiMoCo...
Always use 100% charged battery.