PDA

View Full Version : l6 keypad (5,6)not work

sal_pak
08-26-2008, 10:03
i have one l6 which two bottons 5,6 are not work



i have changed the keypad board but same

plz any one tell me solution
Nadjombe
08-26-2008, 10:37
i have one l6 which two bottons 5,6 are not work



i have changed the keypad board but same

plz any one tell me solutionI will give you a solution today.:D
sal_pak
08-28-2008, 17:02
i am wait for your solution

l7 has also same problem(change board and cable but no responce)

any one give me solution
sal_pak
09-02-2008, 13:27
I will give you a solution today.:D

not any responce from 1 week
tutu1982
09-03-2008, 07:35
Dear all sir i need Motorola L6 keypad not work(All button,without power button)....
dirt_017
09-03-2008, 08:27
why not try replacing flex cable??
gsmshare
09-04-2008, 08:02
helloooo dear tutu1982 you try frist flexi cable if still same you change keypad ic,,,,
all the best,this is my retualam1984@hotmail.com
hackeroflove
09-04-2008, 08:25
Dear all sir i need Motorola L6 keypad not work(All button,without power button)....

change keyboard or connector.
Nadjombe
09-04-2008, 13:40
i am wait for your solution

l7 has also same problem(change board and cable but no responce)

any one give me solutionOK let repair L7 keypads it will be a valide methode for L6 mentioned on top.I repair many in the same way.
First change keybord

If not OK change Flex in second.

If not OK problem is on mainboard connector,be careful and change it.
100°/° work.:D
manibul
09-06-2008, 22:28
i have one l6 which two bottons 5,6 are not work



i have changed the keypad board but same

plz any one tell me solution

First findout which line is missing by m mitter and after then you can solve your problem.
sal_pak
01-11-2009, 15:12
OK let repair L7 keypads it will be a valide methode for L6 mentioned on top.I repair many in the same way.
First change keybord

If not OK change Flex in second.

If not OK problem is on mainboard connector,be careful and change it.
100°/° work.:D
chane keypad board

change connector

still not work
Shadjani_b1998
01-13-2009, 19:13
hi brother ,brother i have l6 in battery connector short , please help me
vilcon
02-10-2009, 14:45
Dear all sir i need Motorola L6 keypad not work(All button,without power button)....

Remove the crystal ICs (3) near the keypad connector on the Keypad PC board. this has worked well with me on L7 and L6. 100% tested by meeeeeeeee!!!!!!!!!!!