TomTom v8 Firmware and Maps

[uberdude]

just make a backup of the current map and remove it from the tomtom. and replace it with the new map.

thats all i do.

[tendriver]

A friend of mine has asked if I can get a copy of US- Western Regions 825.2159. I've scoured the web and can't find a download for it, even on IPmart's forums. He has a One V3 i believe, with a total internal memory of <1gb. As such he wants a small map so he doesn't have to remove his UK map. I've downloaded USA & Canada 825.2159 for him, which comes in at under 1gb from http://www.ipmart-forum.com/showthread.php?t=338224&page=10, but as i said, he would rather install something which doesn't require the removal of his UK map.

Anyone with a link? I would be very appreciative, or alternative suggestions. He's using the official NC.

Thanks

I would not hold my breath waiting to find any US Region map. I haven't seen one, that is anywhere close to current, in close to a year. As uberdude said, cut and paste his UK map onto his computer, then load the USA & Canada onto his ONE. He can swap back to the UK map at any time.

[tstanton1]

I figured that would be the most sensible approach, but as i'm sure you're aware, some people get a bit nervous when other people tinker with their devices.

I will convince him it's the most sensible option. Thanks for the advice.

[psu1]

Hi all,

I noticed that I don't have the POIs I thought I had. Then it hit me. DUH! With the guidance of this site, I have been able to continue to getting new maps. BUT I never did anything with the POIs that I had previously added.

When I 1st started, I had 705 and then 715. When I obtained POIs from assorted sites, I just put them in the North_America folder. There were both .ov2 and.bmp files. They worked fine.

As I continued to upgrade to newer maps and Navcores, I never made changes. I'm now using Navcore 8.204 and N. America 825. Do the 825 maps still use the .ov2 and .bmp files? There now appear to be none of these type of files in the map folder. With 8.204 there now appears to be a separate POI folder. There only appear to be .tlv files in there. What are these type of files?

Do I now need to start over with my additional POIs to have them work with 8.204 and 825 map? THANKS!

psu

[uberdude]

just copy the poi's into the map folder. i did the same to a mates yesterday. he works for a power company and they have custom poi's of their towers, i just copied the poi's from his old v6 map into the new 825.2157 map running SE_Navcore.8.410.1218 and all works fine.

[rytenuff]

As a matter of interest, if the official Navcore is patched to accept pirated maps will the legal map still work with the now patched Nav in it's original state or will it require a new DCT file?
I must confess I have never tried it myself.

[sophie999]

As a matter of interest, if the official Navcore is patched to accept pirated maps will the legal map still work with the now patched Nav in it's original state or will it require a new DCT file?
I must confess I have never tried it myself.


Well,

I just installed a new 8.4 Navcore on my GO920 and left the original maps (about 2yrs old). Works fine (obviously without IQR or ALG). TTS is great. No problems. Just replaced Navcore files as per instructions here. Did not touch the map (will put new NA 825.....57 this weekend).

Sophie

[uberdude]

As a matter of interest, if the official Navcore is patched to accept pirated maps will the legal map still work with the now patched Nav in it's original state or will it require a new DCT file?
I must confess I have never tried it myself.

yes it will i do it all the time.

[mosaiques]

Please!! I need new firmware for TomTom one!! Can somebody upload it?
Thanks in advance.

[msubedar]

Please!! I need new firmware for TomTom one!! Can somebody upload it?
Thanks in advance.

Look back a few pages and you'll find it.

[mosaiques]

Sorry msubedar, I've looked and I found something else (V.8.410.1218). Actually it should work with TT One but I can not patch the ttsystem file, all the patches I have are for V. 7.
Is there a new patch for the new firmware versions?
Thanks!

[mosaiques]

Sorry msubedar, I've looked and I found something else (V.8.410.1218). Actually it should work with TT One but I can not patch the ttsystem file, all the patches I have are for V. 7.
Is there a new patch for the new firmware versions?
Thanks!

[archercj]

just to reiterate (if it helps anyone) I am using V8.410.1218 on a TT One V2 and have full functionality with regards to IQ routing, ALG and TTS( Loqeundo and Vocalizer). Only thing I lose is raised buildings.

I did find however that after trying several of the posted V8.410.1218 setups on here the TTSYSTEM dated 8th March is the only one that works. The other ones boot up ok but you lose the TTS voices selections.

Oh and the above only work with the x40light switch in the model.txt file of the config folder.

[mosaiques]

I've tried the v8.410.1218. The device sees the map (Western_and_Central_Europe_825_2158 with generated dct file), but it can not use it. It comes an error message: "You can not use this map in this device".
I think I need to patch the ttsystem file, how?

[archercj]

just to reiterate (if it helps anyone) I am using V8.410.1218 on a TT One V2 and have full functionality with regards to IQ routing, ALG and TTS( Loqeundo and Vocalizer). Only thing I lose is raised buildings.

I did find however that after trying several of the posted V8.410.1218 setups on here the TTSYSTEM dated 8th March is the only one that works. The other ones boot up ok but you lose the TTS voices selections.

Oh and the above only work with the x40light switch in the model.txt file of the config folder.


I've also just update the system to 5.5122 (as opposed to 5.5112) which is packaged with the latest TomTom navcore.

[mosaiques]

Thanks, I got it. It's working now! ;)

[Eramaavaris]

I've tried the v8.410.1218. The device sees the map (Western_and_Central_Europe_825_2158 with generated dct file), but it can not use it. It comes an error message: "You can not use this map in this device".
I think I need to patch the ttsystem file, how?

Hey dude! I don't want to be rear end hole, but be careful with your finger with all that thaks button clicking...it may wear away (The Thanks button, not the finger...or how the h**l I know that) and we won't want that to happen...right? :D

[Eramaavaris]

Have you tried it and does it cause any problems with "Non-Official" stuff?

Only problem I have is that I can't use my Go910 via TTHome. There is some "TomTomHOMERuntime.exe" error and then the TThome shuts down. However I can download and install updates.

[tendriver]

Have you tried it and does it cause any problems with "Non-Official" stuff?

I had been running 2.6 Beta since it came out, without any problems. No problems seen on this version either, althought I had already Updated map share & QuickFix for today before it came out. Will have to do an update check tomorrow. Only complaint, 2.6 takes about 20 seconds to open past the Splash Screen. Beta did that also.

No problem getting mapshare & Quickfix updates today.

[pictopicto]

just to reiterate (if it helps anyone) I am using V8.410.1218 on a TT One V2 and have full functionality with regards to IQ routing, ALG and TTS( Loqeundo and Vocalizer). Only thing I lose is raised buildings.

I did find however that after trying several of the posted V8.410.1218 setups on here the TTSYSTEM dated 8th March is the only one that works. The other ones boot up ok but you lose the TTS voices selections.

Oh and the above only work with the x40light switch in the model.txt file of the config folder.

archerj i thought you might be on to something here as i checked my ttsystem on my One XL and it was old (nov 2008) so i swapped it for the march 09 one to see if that got my Loquendo TTS voices to work but alas..............

where did you get the 5.5122 boot file from??

[pictopicto]

archerj i thought you might be on to something here as i checked my ttsystem on my One XL and it was old (nov 2008) so i swapped it for the march 09 one to see if that got my Loquendo TTS voices to work but alas..............

where did you get the 5.5122 boot file from??

never mind archerj i found the 5.5122 bootloader in one of the navcores i downloaded.

hasnt solved my problem unfortunately.

Mo/tendriver/rytenuff, got any clues on why everything works except loquendo TTS
this is my screen
http://www.shaunwood.com/images/photo_bucket/20032009144.JPG

i have put x40light in model.txt file so i get fewer menu items.
voices were downloaded thru tomtom home.

[dsa8310]

never mind archerj i found the 5.5122 bootloader in one of the navcores i downloaded.

hasnt solved my problem unfortunately.

Mo/tendriver/rytenuff, got any clues on why everything works except loquendo TTS

i have put x40light in model.txt file so i get fewer menu items.
voices were downloaded thru tomtom home.

Try it out, it's my own LoquendoTTS with Dave and Susan:

http://www.2shared.com/file/4903441/fe7fb85c/LoquendoTTS.html

[
Probably you miss one of the following libs:

LoquendoTTS/lib/LoqAudioBoard.so
LoquendoTTS/lib/LoqTTS6.so
LoquendoTTS/bin/LTTS7AudioBoard.so
LoquendoTTS/bin/libLoqTTS7.so
]

And, go for the full x40 emulation, I heard that it works on ONEs - say, dsa_navcore.8410.zip ;)

[rytenuff]

@pictopicto

I don't know which files you are using so I will post the files that work for me.
http://rapidshare.com/files/207488048/SE_Navcore.8.410.1218.Basicpack.rar
http://rapidshare.com/files/207493352/SE_ttsystem.8.410.1218.rar

The XL2009 original files from TomTom are here:
http://download.tomtom.com/sweet/navcore/8.410.xl2009_plus_2048_tts.CAB-navcore-PLF.cab

You have it working on your ONEv2 so delete the TTS folder from your XL and copy your ONEv2 TTS folder into it.

[tendriver]

Tripmaster has been updated and works on v8 now.

http://www.webazar.org/tomtom/tripmaster.php?lang=uk (http://www.webazar.org/tomtom/tripmaster.php?lang=uk)

If you do trip logs, then this might be for you!!

[tendriver]

RE: The above post. I didn't mean to infer that trip logs was all Tripmaster does. It can provide you with a wealth of info, as well as Speed alerts.

[msubedar]

NEW SPEED CAMERA'S & META.TXT FILE - 20-03-09


http://www.2shared.com/file/5133289/5518f0d9/Cameras__Meta_20-03-09.html

Premium Speedcams for UK & corrected AU error

Courtesy of The Maverick & Thanks to Tendriver

Just a quick tip: the .ver files are not needed to enable the use of the speed cams :cool: Thanks to Tendriver

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.

To install:
You don't need the PNA or META from a map.
What you do need is:
Download EasyUseTools (Get the Password from Rytenuff): http://forum.gsmhosting.com/vbb/showpost.php?p=4201663&postcount=2401
The two files .VER and .Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID
Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

(Installation instructions thanks to Rytenuff)

Enjoy & Please show your Appreciation!!!

Mo.

[mosaiques]

Hey dude! I don't want to be rear end hole, but be careful with your finger with all that thaks button clicking...it may wear away (The Thanks button, not the finger...or how the h**l I know that) and we won't want that to happen...right? :D
I say "thanks" in all my posts. I don't know what makes the thanks button so important.
Whatever, if you want it... so be it.

[bbagi]

TomTomTool Package.

This all-in-one package contains the LATEST version of
TTuser's EasyUseTools dated 23rdFeb ( check properties ) and all the new meta ****fish codes at time of posting. (Courtesy of TTuser)
Plus:
Instructions for use.
Changelog.
"How to Crack a map" Simple to follow instructions.
WinRAR 3.80 Pro ready registered. To unpack and join your downloaded maps.
yDGpatcher_1.2.16.14 (latest) with Readme (Courtesy of yDdraigGoch)

http://www.2shared.com/file/4977440/b43ac38d/TomTomTool_Package.html

This is password protected. PM me for password.


Can i get the password. What does PM means, personal mail, if yes tell me ur mail id.

I am looking for the activation code for Italy_815.2024 maps

[msubedar]

Can i get the password. What does PM means, personal mail, if yes tell me ur mail id.

I am looking for the activation code for Italy_815.2024 maps

There is no Activation Code for 815.XXXX maps. PM means Private Message, click on Rytenuff's Name and click on send private message. Once you get the password off Rytenuff i think in his Package is also a How To Guide and that i'm sure will show you how to patch a map for use with your tomtom.

Mo.

[BuMobiles]

There is no Activation Code for 815.XXXX maps. PM means Private Message, click on Rytenuff's Name and click on send private message. Once you get the password off Rytenuff i think in his Package is also a How To Guide and that i'm sure will show you how to patch a map for use with your tomtom.

Mo.

Whats the point of pm, many users have tried to pm rytenuff including myself for these files and not even a pm back saying No!!!!!

So why is that?

[uberdude]

personally. and i'm speaking here as a moderator of a forum with a member base of well over 30,000 users with 300 to 600 plus active users per day.
i see no need what so ever for a user to password a file and only give it out in pm form.

if a file requires a password it is a very easy task to code the thread so that any user requiring to see the password only has to press the thanks button.

thats if the forums admin have enabled that function.
but even if he / she has not enabled that function the least you can do is place the password within the thread in a code or quote bar.

asking for a pm in order to distribute a password only creates animosity and a large amount of anger towards that user especially if that user does not respond to the pm's being sent his way.

[dsa8310]

Permanent link to TTuser's Easyusetools page:

http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58

I really think that forum items should be free to both reg. and unreg. users and that thanks should not be enforceable in any way...

[rytenuff]

Whats the point of pm, many users have tried to pm rytenuff including myself for these files and not even a pm back saying No!!!!!

So why is that?
That is a false allegation that I resent.
Show me one post complaining I have not responded to a PM! You can't because I have ALWAYS replied to every PM I have received.
You sent me the PM quoted below :

http://forum.gsmhosting.com/vbb/showpost.php?p=4254100&postcount=2897

"This is password protected. PM me for password "
"Hi can i have the passsword for this file please
Thanks
B.u Mobiles "
(my answer Post 2897)
"Since you've chosen not to receive Private Messages that will prove to be difficult."
(Rytenuff)
"tendriver" tried to PM you with regards to deleting a post and found this to be the case too.

[tstanton1]

To be fair to both sides, rytenuff did respond very quickly to my PM request for a password, but i've also noticed that pretty much all the maps i've downloaded come with the most recent versions of easyusetools and yDGpatch anyway. If someone is against having to PM rytenuff for a password then surely they are welcome to find the files themselves elsewhere (which is not all that difficult looking through this thread).

[psu1]

just copy the poi's into the map folder. i did the same to a mates yesterday. he works for a power company and they have custom poi's of their towers, i just copied the poi's from his old v6 map into the new 825.2157 map running SE_Navcore.8.410.1218 and all works fine.

UD,

Thanks for the advice. I did this and it seems to work. Do you know why there is a separate POI folder om TT and what these .tlv files are. Are they upgraded versions of the ov2 and bmp files?

Thanks!

psu

[uberdude]

no not really i'm just learning my way as i go along.

[tendriver]

Whats the point of pm, many users have tried to pm rytenuff including myself for these files and not even a pm back saying No!!!!!

So why is that?

BuMobiles,

When I try to PM you, I get this:

BuMobiles has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.

So why is that????

[BuMobiles]

BuMobiles,

When I try to PM you, I get this:

BuMobiles has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.

So why is that????


I don't know but i can send pm's ?
Might be a problem on the forum side of things :mad:

All i'm saying is the a registered member should be able to download and not have to pm everytime? :cool:

Lets remember who actually started this thread and who as helped loads of people out before others was on the seen ;)

I will email a super mod / admin and get my pm's sorted :D

Thanks
B.u Mobiles

[uberdude]

I don't know but i can send pm's ?
Might be a problem on the forum side of things :mad:

All i'm saying is the a registered member should be able to download and not have to pm everytime? :cool:

Lets remember who actually started this thread and who as helped loads of people out before others was on the seen ;)

I will email a super mod / admin and get my pm's sorted :D

Thanks
B.u Mobiles

go into your USER CP page
click on edit options, scroll down to the part dealing with pm's.
check that the option to enable pm's is selected, also check the option below that ( You may limit the receipt of private messages to just moderators and your contacts. Other members who attempt to send messages to you will be told that you have disabled private messaging. ) make sure this one is not selected.

as it limits incoming pm's to admins mods and your contacts.

[rytenuff]

I don't know but i can send pm's ?
Might be a problem on the forum side of things :mad:

All i'm saying is the a registered member should be able to download and not have to pm everytime? :cool:

Lets remember who actually started this thread and who as helped loads of people out before others was on the seen ;)

I will email a super mod / admin and get my pm's sorted :D

Thanks
B.u Mobiles

No! That is not all you are saying. You have unjustly accused me of failing to reply to PMs. I replied to you on the forum to point out to you that it was impossible to contact you.
I have yet to see an apology for what is your error.
The password thing was suggested to me after a forum discussion where it was mentioned that over 700 had downloaded a post I had made without comment or a word of thanks out of a total of 714.
Members do not have to PM everytime. This is the ONLY post I have made which I have asked for a PM.
As has been pointed out, all the programs, and the help files I have written can be found already posted openly in the forum, If anyone cares to actually look.
i.e. there is no need to ask for a password if you are willing to put some effort into it.

[tendriver]

go into your USER CP page
click on edit options, scroll down to the part dealing with pm's.
check that the option to enable pm's is selected, also check the option below that ( You may limit the receipt of private messages to just moderators and your contacts. Other members who attempt to send messages to you will be told that you have disabled private messaging. ) make sure this one is not selected.

as it limits incoming pm's to admins mods and your contacts.

uberdude,

BuMobiles is the Moderator of this forum. I betcha he knows what the setting are and shoud be. ;);)

[uberdude]

uberdude,

BuMobiles is the Moderator of this forum. I betcha he knows what the setting are and shoud be. ;);)
and i'm a moderatror of a forum just as large as this one. makes no difference at all just giving a suggestion as to what the error may be.
you'd be surprised just how many settings there are on these types of forums.

[macyorky]

I don't know but i can send pm's ?
Might be a problem on the forum side of things :mad:

All i'm saying is the a registered member should be able to download and not have to pm everytime? :cool:

Lets remember who actually started this thread and who as helped loads of people out before others was on the seen ;)

I will email a super mod / admin and get my pm's sorted :D

Thanks
B.u Mobiles
I pm,d BuMobiles and got a server error msg but pm went through hope this helps people :(

[macyorky]

I don't know but i can send pm's ?
Might be a problem on the forum side of things :mad:

All i'm saying is the a registered member should be able to download and not have to pm everytime? :cool:

Lets remember who actually started this thread and who as helped loads of people out before others was on the seen ;)

I will email a super mod / admin and get my pm's sorted :D

Thanks
B.u Mobiles
I pm,d BuMobiles and got a server error msg but pm went through hope this helps people :( got this when trying to post this msg
Forbidden

You don't have permission to access /vbb/newreply.php on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
Apache Server at forum.gsmhosting.com Port 80

[BuMobiles]

I pm,d BuMobiles and got a server error msg but pm went through hope this helps people :(

I pm,d BuMobiles and got a server error msg but pm went through hope this helps people :( got this when trying to post this msg
Forbidden

You don't have permission to access /vbb/newreply.php on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
Apache Server at forum.gsmhosting.com Port 80

That was the problem i was getting at times

No! That is not all you are saying. You have unjustly accused me of failing to reply to PMs. I replied to you on the forum to point out to you that it was impossible to contact you.
I have yet to see an apology for what is your error.
The password thing was suggested to me after a forum discussion where it was mentioned that over 700 had downloaded a post I had made without comment or a word of thanks out of a total of 714.
Members do not have to PM everytime. This is the ONLY post I have made which I have asked for a PM.
As has been pointed out, all the programs, and the help files I have written can be found already posted openly in the forum, If anyone cares to actually look.
i.e. there is no need to ask for a password if you are willing to put some effort into it.

Here is your apology, Sorry for the post and trying to accuse you.

I agree at times with the passwords, what i was trying to say is that i pm'ed you and you could have replied within many ways if my pm's was causing errors ?

i.e.

1, Email ;)
2, Post a public note saying BuMobiles i have recieved your pm but i can't reply to it due to server error, etc ? :cool:

As the meerkat would say Simpluz!!!!!!

[BuMobiles]

I pm,d BuMobiles and got a server error msg but pm went through hope this helps people :(

I pm,d BuMobiles and got a server error msg but pm went through hope this helps people :( got this when trying to post this msg
Forbidden

You don't have permission to access /vbb/newreply.php on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
Apache Server at forum.gsmhosting.com Port 80

No! That is not all you are saying. You have unjustly accused me of failing to reply to PMs. I replied to you on the forum to point out to you that it was impossible to contact you.
I have yet to see an apology for what is your error.
The password thing was suggested to me after a forum discussion where it was mentioned that over 700 had downloaded a post I had made without comment or a word of thanks out of a total of 714.
Members do not have to PM everytime. This is the ONLY post I have made which I have asked for a PM.
As has been pointed out, all the programs, and the help files I have written can be found already posted openly in the forum, If anyone cares to actually look.
i.e. there is no need to ask for a password if you are willing to put some effort into it.

uberdude,

BuMobiles is the Moderator of this forum. I betcha he knows what the setting are and shoud be. ;);)

Of course i know what the settings are, they were set up to recieve pm's.
but at times i couldn't send or recieve them as you have pointed out :rolleyes:

[rytenuff]

[quote=BuMobiles;4273737]That was the problem i was getting at times



Here is your apology, Sorry for the post and trying to accuse you.

I agree at times with the passwords, what i was trying to say is that i pm'ed you and you could have replied within many ways if my pm's was causing errors ?

i.e.

1, Email ;)
2, Post a public note saying BuMobiles i have recieved your pm but i can't reply to it due to server error, etc ? :cool:

As the meerkat would say quote]

I did! Read this: http://forum.gsmhosting.com/vbb/showpost.php?p=4254100&postcount=2897

Simpluz!!!!!!

Then again here: http://forum.gsmhosting.com/vbb/showpost.php?p=4270878&postcount=3033

Simpluz!!!!!!

Seems it's not quite simple enough.

BTW
The report of server errors has also been reported but we are STILL getting it.
The inability for the majority of us to post attachments reported many, many times is STILL an ongoing issue.

[rytenuff]

New Simple One Click Keygen
This appears to have been missed. (Only downloaded 24 times) Maybe because it wasn't heralded with large colourful fonts.:D
TomTom Keygen 2009One click is all that is required. No typing device numbers etc.
Does not need to be installed just run it from the desktop. Only 564KB in size.Get it Here!
http://www.2shared.com/file/5098684/7a4d68bd/TomTom_Keygen_2009.html

[tendriver]

New Simple One Click Keygen

This appears to have been missed. (Only downloaded 24 times) Maybe because it wasn't heralded with large colourful fonts.:D

TomTom Keygen 2009
One click is all that is required. No typing device numbers etc.

Does not need to be installed just run it from the desktop. Only 564KB in size
.Get it Here!


http://www.2shared.com/file/5098684/7a4d68bd/TomTom_Keygen_2009.html



Keep in mind that TomTom Keygen 2009, developed by BenBBS, is in the early BETA test stage.

[rytenuff]

It works as is tendriver. The new one he is working on is in beta. I have tried it and cannot fault it. If it doesn't work for anyone else (why It wouldn't I don't know) then there are other keygens to try. This one is SIMPLE, requires no knowledge and is something for complete newbies to try first. I hope people who have no difficulty in using other keygens give it a try too. If he gets enough positive feedback he may keep on developing it. Even Albert acknowledges it is very cleverly thought out.

[rytenuff]

And another!!
This is a DOS version of yDGpatcher to patch ttsystem files (or PNDNavigator if you have that) (Not SE versions) Does not require .NET to be installed. Apparently works with MACs too.

http://rapidshare.com/files/212088202/patchYDG.rar

[uberdude]

for the love of all that is pure and good will some one sort the bloody server out.
how the hell can i respond to a flipping pm when all i get are errors from the server when trying to respond to a pm. ?
i mean come the hell on is some one not paying the bills or something ?.

rant over.



RYTENUFF i have tried to answer you pm but all i get are errors so i will post here

i pressed the thanks button on BuMobiles post not to call your good name into disrepute as you have helped me a lot in this and other threads with your advice and posts but to agree with the part about passwords in pm's.

every post i have made on this forum where i posted a file that required a password ( the password is only there to help the file live longer on the relevant hosting site so they cant snoop in it - see the v 7 map thread for proof ) i have also openly posted the password in the same thread in a coded box.

members and non members alike can still see the password without having to ask for it.
i only code my links to prevent them being tracked back to the forum, ie a file hosted on megaupload can not be tracked back here thus allowing it to live longer.

any way as i have already said i disagree with the practice of asking users to pm for passwords. for a number of reasons i mean what if you fell ill and could not get to a pc for say 2 weeks. who would then pass on the passwords ?.

i hope you understand my point, and if you wish i will post my reason on the forum so the other members see that i'm not calling your name in to disrepute only the practice of passing passwords in pm's

[rytenuff]

I have answered you in PM.
But for clarity then here it is.

I fully understand your position regarding passwords. However, the actual post you clicked thanks on was not complaining about the use of passwords but that I did not respond to requests for one. That was a lie. You clicked on that false statement assuming it to be true.
You now know that is was not. If it is your choice to leave the thanks against the lie then so be it.

[uberdude]

i'm not going to start a argument with you over a thanks button on a forum.
if you wish to argue so be it but you can do it without me.

[pictopicto]

Crikey i went away for a few days and when i come back its like the cold war....all the super powers on the forum arguing with each other.

In defence of Rytenuff i remember him posting that he had tried to PM BU but it wouldnt work.

And also if people showed appreciation for all the work these guys put in then we wouldnt be in this situation!!!!!!!

Glad to see its all calmed down and we have some kind of a ceasefire..:)

[pictopicto]

@pictopicto

You have it working on your ONEv2 so delete the TTS folder from your XL and copy your ONEv2 TTS folder into it.

Well guys thanks for all the download links to Loquendo TTS and your own navcores.

I actually followed the advice above of Rytenuff.

I wiped my card (except for the maps and splash screens and ttgo.bif) and i copied over ALL the files from the TT1 v2 (except ttgo.bif and maps and splash screens) and hey presto.......

ALL WORKING NOW.

So thanks for your help.:D

[rytenuff]

All's well that ends well. Glad you got it going. I wonder what the actual problem was?

[pictopicto]

All's well that ends well. Glad you got it going. I wonder what the actual problem was?

I dont know but like you say all is well that ends well and it takes others to point out the obvious sometimes.
:D

[rytenuff]

TOMTOM KEYGEN & PATCHER v1.5D

This version of Tomtom Keygen 2009 v1.5D will now patch official ttsystem files (not SE versions) as well as patch the v8 maps and cams too.
Please give feedback on it so the developer can further fine tune it.
Get it here: http://www.2shared.com/file/5152804/d91b117f/TomTom_V115D_2009_keygen.html

[rytenuff]

Re. Tomtom Keygen & Patcher v1.5D

A bit of feedback. I tried it with official Nav 8.410 and UK map.
It patched the map but said that the ttsystem file was wrong or already patched. That Nav has both a PNDNavigator file and a ttsystem file. That may be the problem. I have reported this to the author
I then tried it with official Nav8.320 and UK map and it patched both successfully.

[tendriver]

Re. Tomtom Keygen & Patcher v1.5D

A bit of feedback. I tried it with official Nav 8.410 and UK map.
It patched the map but said that the ttsystem file was wrong or already patched. That Nav has both a PNDNavigator file and a ttsystem file. That may be the problem. I have reported this to the author
I then tried it with official Nav8.320 and UK map and it patched both successfully.

Unless you have a 2009 TTOne or XL then 8.410 is not an official Navcore for whatever device you have. That should explain why 1.5D wouldn't patch the ttsystem file.

[rytenuff]

I believe it should have patched it. It just shouldn't have run. I don't think he was aware of the PNDNavigator file from my PMs to him.
I use the term official to differentiate it from SE versions for simplicity.

Edit
Just tried putting the (official as opposed to SE version) PNDNavigator file into the patchYDG DOS program folder. It patched it without complaint.

[archercj]

The attached download is a zipped up file of my 8.410 system for a Tomtom One v2 that allows loqeundo and vocalizer TTS plus lane guidance, IQ routing etc. The file does not include any maps or the Loquendo / Vocalizer folders

http://rapidshare.com/files/211491925/8410.zip

[uberdude]

I believe it should have patched it. It just shouldn't have run. I don't think he was aware of the PNDNavigator file from my PMs to him.
I use the term official to differentiate it from SE versions for simplicity.

Edit
Just tried putting the (official as opposed to SE version) PNDNavigator file into the patchYDG DOS program folder. It patched it without complaint.

the author may need to do a little work with the code as kaspersky antivirus detects it as a Trojan and refuses to allow it to launch.
i have no doubt that it is safe and not a Trojan but kapsersky wont allow it to run.

looks like another example of a over protective av suite that detects keygens as harmful.

[pictopicto]

as requested by Tendriver here is a rar file of my entire SD card (excluding map and with edited ttgo.bif file for security)

I have included the Loquendo folder so you just need to add a map and keygen it and you are away.

it includes bootloader 5.5012 which i know is not the latest but is working perfect on my TT1.

download link here (http://www.2shared.com/file/5155526/902cb93b/TT_one_v2_8410_TTS_ALG.html)

PS. also tested on TT one XL and TT one v4

[archercj]

as requested by Tendriver here is a rar file of my entire SD card (excluding map and with edited ttgo.bif file for security)

I have included the Loquendo folder so you just need to add a map and keygen it and you are away.

it includes bootloader 5.5012 which i know is not the latest but is working perfect on my TT1.

download link here (http://www.2shared.com/file/5155526/902cb93b/TT_one_v2_8410_TTS_ALG.html)

PS. also tested on TT one XL and TT one v4

Cheers pictopicto. Am going to compare it to my setup that works as well and will let you know of any differences especially as I've found some TTSYSTEM's don't work

p.s. automatic promotion still on after 3-2 at Crewe. Or another playoffs heartache

[dsa8310]

Unless you have a 2009 TTOne or XL then 8.410 is not an official Navcore for whatever device you have. That should explain why 1.5D wouldn't patch the ttsystem file.

No, no, the so called map-patching programs need, in order to do their "blind" patching, either an PNDNavigator (or an 8-410-1218-1.dll type of TTHome file!) or an embedded ttn inside a ttsystem. In the later case the ttn (aka PNDNavigator) is firstly extracted, patched and re-inserted into the ttsystem file. Since v8.410 is the first ttsystem that does NOT contain a ttn but a symbolic link to PNDNavigator an attempt to map-patch it will fail (with some error message).

The idea is to always patch the navigator file, this seems to be, in the future, PNDNavigator and the TTHome dll (ex. 8-410-1218-1.dll).

[Eramaavaris]

the author may need to do a little work with the code as kaspersky antivirus detects it as a Trojan and refuses to allow it to launch.
i have no doubt that it is safe and not a Trojan but kapsersky wont allow it to run.

looks like another example of a over protective av suite that detects keygens as harmful.

Some antivirus programs gives you false positives with keygens and stuff, but if you want to be sure, upload it here http://www.virustotal.com/ and check what the other programs think about it :D.

[ixlion]

I discovered that with NC 8410-1218 I can select more radar situations like e.g. : mobile camera hot spots, average speed check warnings, average speed check start/end, bidirectional safety cameras, accident blackspots and ungated railway crossings.
This cann't be seen with e.g. 8.014-9372 in my TT Xl.

[uberdude]

Some antivirus programs gives you false positives with keygens and stuff, but if you want to be sure, upload it here http://www.virustotal.com/ and check what the other programs think about it :D.

i am not a idiot i was pointing out that in order for the author to reach a large as possible user base he may need to re-write some of his base code to stop certain AV suites incorrectly identifying the files as a threat when they are not.

as i know for a fact certain av suites such as kaspersky will not even allow you the option to allow the file to run once detected.

[tendriver]

Here is a link to the latest postcodes #801.

http://rs275.rapidshare.com/files/193796499/zip.rar (http://www.anonym.to/?http://rs275.rapidshare.com/files/193796499/zip.rar)

[macyorky]

Here is a link to the latest postcodes #801.

http://rs275.rapidshare.com/files/193796499/zip.rar (http://www.anonym.to/?http://rs275.rapidshare.com/files/193796499/zip.rar)
Thanks tendriver thanks button not working:(

[tendriver]

Thanks tendriver thanks button not working:(
Yes it is. It is sometimes just sloooooow showing up.

[tendriver]

i am not a idiot i was pointing out that in order for the author to reach a large as possible user base he may need to re-write some of his base code to stop certain AV suites incorrectly identifying the files as a threat when they are not.

as i know for a fact certain av suites such as kaspersky will not even allow you the option to allow the file to run once detected.

The developer was using 3rd party packer called "Alloy". He is in the process of making corrections/changes.

[uberdude]

The developer was using 3rd party packer called "Alloy". He is in the process of making corrections/changes.

thanks for the update, it is appreciated

also for reference the first release was fine it was just the latest one that tripped KASPERSKY.

[mathiaskt]

I tried TomTom V1.5D 2009 keygen V1.5D on TT720 with NC8.410 and it works like a charm - many thanks. I am running it on a 4G micro SD with a SD adapter. Had a W&C map which didn't work and now it does work. Planning on getting an 8G SD card to use with it unless someone can tell me how to map the internal drive to the SD drive.

I do have a problem though - the quickgpsfix does not work an I am not sure why. It stopped working since I installed NC8.410 - any pointer is really appreaciated.

Thanks again.

[gadgetathome]

Hi All,

Does any have the 'Fuel Stations EU Prices' Updte, I have the meta but no files????

Cheers.

[tendriver]

Here is an updated version that the AV programs like a lot better.

TomTom V1.5D 2009 keygen.zip (http://www.ipmart-forum.com/attachment.php?attachmentid=482741&d=1237844237)

[dsa8310]

I do have a problem though - the quickgpsfix does not work an I am not sure why. It stopped working since I installed NC8.410 - any pointer is really appreaciated.


I would go back to an x30 version, namely v8.302, temporarily, in order to setup the phone for both hands-free AND wireless settings (even erase and reinstall the phone). Check that QuickGPSfix works (with anonymous user). If necessary, go back as far as to any older device back-up known to work with QuickGPSfix, if available.
Then reinstall v8.410. It would keep working, hopefully (x40 versions do not let you set the wireless connection for lack of built-in GPRS, I believe).
Keep wireless disabled when not checking QuickGPSfix, it is safer (no unwanted connection attempts via your phone plan).

[dsa8310]

I would go back to an x30 version, namely v8.302, temporarily, in order to setup the phone for both hands-free AND wireless settings (even erase and reinstall the phone). Check that QuickGPSfix works (with anonymous user). If necessary, go back as far as to any older device back-up known to work with QuickGPSfix, if available.
Then reinstall v8.410. It would keep working, hopefully (x40 versions do not let you set the wireless connection for lack of built-in GPRS, I believe).
Keep wireless disabled when not checking QuickGPSfix, it is safer (no unwanted connection attempts via your phone plan).

Or I would better forget about it and use TTHome to update quickgpsfix...

[tricia clay]

hiya i found the same with NC8.410 , no data connection,which also means no weather reports,as your tt cannot connect to server.

[tendriver]

Here is the latest Easyusetools from TTUser. He has incorporated yDdraigGoch (http://www.ipmart-forum.com/member.php?u=823482)'s yDGpatcher into it.

Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher.rar (http://www.ipmart-forum.com/attachment.php?attachmentid=482654&d=1237814079)

[dsa8310]

Or I would better forget about it and use TTHome to update quickgpsfix...

As a matter of fact, the last x40 version able to inherit the wireless settings from x30 was v8.310 (with my go910). I couldn't make v8.410 do it. And I have just noticed that with the North American map, the QuickGPSfix menu item disappears. It comes back with the Western Europe map. So search me...
(maybe v8.310 is less restrictive than v8.410, or I have lost something in between)

[tendriver]

As a matter of fact, the last x40 version able to inherit the wireless settings from x30 was v8.310 (with my go910). I couldn't make v8.410 do it. And I have just noticed that with the North American map, the QuickGPSfix menu item disappears. It comes back with the Western Europe map. So search me...
(maybe v8.310 is less restrictive than v8.410, or I have lost something in between)

8.410 is not a x40 Navcore. It is for the 2009 TT One & 2009 TT XL. They are European models, so that would explain no QuickGPSfix menu with a NA map.

[rytenuff]

Here is the latest Easyusetools from TTUser. He has incorporated yDdraigGoch (http://www.ipmart-forum.com/member.php?u=823482)'s yDGpatcher into it.

Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher.rar (http://www.ipmart-forum.com/attachment.php?attachmentid=482654&d=1237814079)

LoL. No credit given anywhere in the package to yDdraigGoch (http://www.ipmart-forum.com/member.php?u=823482) only the name on the icon patchydg. (Note change to lower case from patchYDG.)
There is no mention of it in the "readmenot" doc either. In fact, the first line is:
"Easyusetools for Keygen, Mapcheck, Metacheck, ttsystem-Patcher
by TTuser".
Interesting development. ;)

[Eramaavaris]

i am not a idiot i was pointing out that in order for the author to reach a large as possible user base he may need to re-write some of his base code to stop certain AV suites incorrectly identifying the files as a threat when they are not.

as i know for a fact certain av suites such as kaspersky will not even allow you the option to allow the file to run once detected.

Well mate, did I call you an idiot? No, I did not. That was just friendy suggestion to you what you can do to check those files which av programs says they are not good. Thats all. :(

I haven't use Kaspersky, but isn't there a possibility to exclude files from scanning? Bd has it and I think kav should have it too, because it's so common feature in av or is suites. I can allow my av to run detected file/program/etc if I want and mostly it's not a big deal to do. Peace.:)

[THEPHONEJUNKY]

Hi all

I am going to get a HTC Touch Diamond and i want to know what is the latest Navcore to run TomTom with 8.25 maps.

and if anyone has a link to Navcore it would be very helpfull.

Thanks

[sophie999]

Hi all

I am going to get a HTC Touch Diamond and i want to know what is the latest Navcore to run TomTom with 8.25 maps.

and if anyone has a link to Navcore it would be very helpfull.

Thanks


I believe this is the latest version for WM.

http://www.gpsunderground.com/forums/showthread.php?t=4764

[joseph64]

Hi All,
Just to report that in my GO 910 the new Navcore 8.410 1218 works A-OK off the road as I just changed it. The best part of the improvement on free RAM as it now reports 18MB free. The OS is obviously 286217 and my Boot loader is 5.5106 and as it looks like it's working fine, i'm for the time being not going to upgrade this. Obviously if any of you "guru's" tell me about a good reason to upgrade, I will. Thanks for all you reporting and links to download the "basic" and "ttsystem" files for 8.410.
Cheers, joseph64:D:D

[dsa8310]

8.410 is not a x40 Navcore. It is for the 2009 TT One & 2009 TT XL. They are European models, so that would explain no QuickGPSfix menu with a NA map.

I followed my own advice, I went back and forth between a back-up capable of QuickGPSfix and v8.302, v8.310 and v8.410.
With respect to QuickGPSfix, v8.310 and v8.410 seemed indistinguishable to me.
While I could get a wireless, via the phone, update of QuickGPSfix with v8.302, both v8.310 and v8.410 reported that my "QuickGPSfix file is already up to date".
So, search me...
But, while I agree that there is a distinction between NA and WE maps (another example, you get the rightmost vertical traffic bar displayed always with a NA map, while a receiver or a traffic receiving holder/connector - as for the go910 - is needed for the WE map traffic bar display) I still consider v8.410 a full fledged, even top of the class, for now, x40 navcore.
In fact, I believe, judging from the available hardware that there are at most two navcore classes developed by TT (x30 and x40), differing by their graphics and the built-in GPRS (live) services.
I find regrettable that the live services are not offered to all bluetooth devices since there are phones capable of simultaneus data and talk (and either hands-free or wireless can be controlled independently).
Crippling this way their operating system (navcore) instead of making it support all hardware configurations (they solely justify a price difference) is going to backfire...

[pictopicto]

Further to actually getting the Loquendo voices to actually work i went on a road test today with my TT one XL running 8410.1218.

It seems to work ok except for one thing.

When i choose the Loquendo voice the free RAM disappears to less than 1mb.
this then causes the tomtom to crash after a few voice commands and restart.

if i then choose a normal voic its fine (free ram 2/4mb).

Have i installed somthing wrong. By that i mean the Outsourced.bin folder?
When it came it was called outsourced.8410, should i have left it like that or should i have done what i have done and changed it to outsourced.bin?????

I am running Boot 5.5122 with Western & Central Europe 825.2157.

Any thoughts?

[tendriver]

So, search me...
I still consider v8.410 a full fledged, even top of the class, for now, x40 navcore.


Since 8.410 is not available from TT for x40 units, it is not a x40 navcore, but I guess you could call it a x40 similar navcore, if you so desire.

[rytenuff]

Further to actually getting the Loquendo voices to actually work i went on a road test today with my TT one XL running 8410.1218.

It seems to work ok except for one thing.

When i choose the Loquendo voice the free RAM disappears to less than 1mb.
this then causes the tomtom to crash after a few voice commands and restart.

if i then choose a normal voic its fine (free ram 2/4mb).

Have i installed somthing wrong. By that i mean the Outsourced.bin folder?
When it came it was called outsourced.8410, should i have left it like that or should i have done what i have done and changed it to outsourced.bin?????

I am running Boot 5.5122 with Western & Central Europe 825.2157.

Any thoughts?

Yes you should have. Rename it to outsourced.8410

[dsa8310]

There are two ways to handle memory shortages on devices espeacially those with less than 64MB of internal memory (32MB).

Both apply the same principle, that is storing TT binaries in the main storage (SD, HDD, etc) instead of the operative memory.

A first good step in this direction has been finally made by TT in v8.410, where the navigation core program, ttn, aka PNDNavigator, has been separated from ttsystem and stored on SD, HDD (part of the official CAB file). The memory gain is about 6 MB.

An extra 4-5 MB can be saved either in TTuser's style - with an Outsourced.nnnn directory (provided in the SE_ packages) that has to be handled explicitly by the user, or automatically, like in the dsa_navcore.nnnn.zip releases - where the user is relieved of this concern.

I would certainly prefer the dsa style :)
However, note that the effective gain is reached after an extra cold boot of the device (boot, then connect and disconnect tt from pc one more time, or reset it via the pin-hole) which shouldn't be an issue for us... :)

(the binaries are stored in a directory named "nnnn", ex. 8410 for v8.410, 8302 for v8.302, and so on, created automatically, just save a few MB of free space on your SD/HDD for it).

[msubedar]

NEW SPEED CAMERA'S & META.TXT FILE - 24-03-09

http://www.2shared.com/file/5167593/ee1b2624/Cameras__Meta_24-03-09.html

Courtesy of The Maverick & Thanks to Tendriver

Just a quick tip: the .ver files are not needed to enable the use of the speed cams :) Thanks to Tendriver.

Safety_Cam_AT_TomTom_2314
Safety_Cam_BE_TomTom_2315
Safety_Cam_DE_TomTom_2316
Safety_Cam_ES_TomTom_2317
Safety_Cam_FI_TomTom_2318
Safety_Cam_FR_TomTom_2319
Safety_Cam_UK_TomTom_2320
Safety_Cam_IT_TomTom_2321
Safety_Cam_NL_TomTom_2322
Safety_Cam_NO_TomTom_2323
Safety_Cam_PT_TomTom_2324
Safety_Cam_SE_TomTom_2325
Safety_Cam_PL_TomTom_2326
Safety_Cam_CZ_TomTom_2327
Safety_Cam_ZA_TomTom_2328
Safety_Cam_AU_TomTom_1993
Safety_Cam_UK_Premium_2334

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.

To install:
You don't need the PNA or META from a map.
What you do need is:
Download EasyUseTools (Get the Password from Rytenuff): http://forum.gsmhosting.com/vbb/showpost.php?p=4201663&postcount=2401
The two files .VER and .Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID
Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

(Installation instructions thanks to Rytenuff)

PS. There are many new patching tools now to choose from that are very easy to use that you can find on previous posts.

Enjoy & Please show your Appreciation!!!

Mo.

[archercj]

Further to actually getting the Loquendo voices to actually work i went on a road test today with my TT one XL running 8410.1218.

It seems to work ok except for one thing.

When i choose the Loquendo voice the free RAM disappears to less than 1mb.
this then causes the tomtom to crash after a few voice commands and restart.

if i then choose a normal voic its fine (free ram 2/4mb).

Have i installed somthing wrong. By that i mean the Outsourced.bin folder?
When it came it was called outsourced.8410, should i have left it like that or should i have done what i have done and changed it to outsourced.bin?????

I am running Boot 5.5122 with Western & Central Europe 825.2157.

Any thoughts?

Check my downoad pictopicto. very similar to yours but i use a config folder.

By the way I tried your download on my TomTom One v2 and it seems to work ok.

[archercj]

Further to actually getting the Loquendo voices to actually work i went on a road test today with my TT one XL running 8410.1218.

It seems to work ok except for one thing.

When i choose the Loquendo voice the free RAM disappears to less than 1mb.
this then causes the tomtom to crash after a few voice commands and restart.

if i then choose a normal voic its fine (free ram 2/4mb).

Have i installed somthing wrong. By that i mean the Outsourced.bin folder?
When it came it was called outsourced.8410, should i have left it like that or should i have done what i have done and changed it to outsourced.bin?????

I am running Boot 5.5122 with Western & Central Europe 825.2157.

Any thoughts?

By the way when i checked your download I noticed you had both the Outsourced.bin and outsourced.8410 folders

[msubedar]

By the way when i checked your download I noticed you had both the Outsourced.bin and outsourced.8410 folders

@ Pictopicto, You don't need 2 "outsourced" folders.

[flextest]

Go 910 tom tom.
Good afternoon, As a complete neewbie to TomTom, i have aquired my mates 910 with out of dates maps and version. Think it is version 6 on maps and bios version.
I have spent a couple of lunchies lookin gover many of teh 200 + posts.

What i have summiesed is that i need to download the latest Home for Tom tom, then patch it
key generator somewhere
down load version 8 of the bios software
and download version 8.xx of the maps and camera

I have DLtt keygen09, but when i run .exe it fails
DL easytool, but no readme files.
What i am looking for is an idiots guide to do this.

For what i have read, some of the latest files dont work on the 910, so i would be happy with what i can get.

Thanks very much in advance
I have C and W maps


I have doenload

[satellitefreak]

does somebody have or could somebody write a noob tutorial about how to install Navcore 8.410 properly on a Tomtom One V2? I tried to install but when I tap the screen to get in the menu tomtom freezes en restarts

[rytenuff]

@satellitefreak Download the dump made by archercj or pictopicto of their working 8.410 system. Make a backup of your SD card then format it. Copy and paste everything on ONE of the dumps, which ever you chose to your SD card. Or, buy a new SD card and use that if you don't feel confident about deleting/formatting your original Sd card.

[msubedar]

Go 910 tom tom.
Good afternoon, As a complete neewbie to TomTom, i have aquired my mates 910 with out of dates maps and version. Think it is version 6 on maps and bios version.
I have spent a couple of lunchies lookin gover many of teh 200 + posts.

What i have summiesed is that i need to download the latest Home for Tom tom, then patch it
key generator somewhere
down load version 8 of the bios software
and download version 8.xx of the maps and camera

I have DL the keygen09, but when i run .exe it fails
DL easytool, but no readme files.
What i am looking for is an idiots guide to do this.

For what i have read, some of the latest files dont work on the 910, so i would be happy with what i can get.

Thanks very much in advance
I have C and W maps

Read this, it should help... Also maps can be found in this thread, probably around 30 pages back or just use the search function and type in your "map name" and "825"

http://forum.gsmhosting.com/vbb/showpost.php?p=4272218&postcount=2

Mo.

[tricia clay]

@ Pictopicto, You don't need 2 "outsourced" folders.

hiya i also have both outsourced folders, which can be safely deleted????
please

[tendriver]

hiya i also have both outsourced folders, which can be safely deleted????
please

keep outsourced.8410

[dsa8310]

I've just learned that people are confused about how to use a dsa_navcore.nnnn.zip ; with the risk of annoying some, here's the howto:

1) Download the latest set of dsa navcores from post #2903 (http://forum.gsmhosting.com/vbb/showpost.php?p=4254494&postcount=2903)
2) Open desired navcore, ex. dsa_navcore.8302.zip for NC v8.302
3) Read file weblink.txt, it's a link to TT's original/official CAB[inet] file for NC v8.302; download the cab file.
4) Install the CAB over the top of device main storage.
5) Install PNDNavigator and ttsystem from dsa_navcore.8302.zip over the top of device main storage.
6) Disconnect device from PC, let it start-up fully.
7) Reconnect device to PC, fully; disconnect at any time in order to start-up again. Now, all memory savings are effective, forever.

Needless to say, PNDNavigator is map-patched and ttsystem is menu-patched in full.

People willing to have a working LoquendoTTS - of newest version, 7, could do these steps too:

1) Get the prototypical LoquendoTTS folder, with Dave and Susan, from post #2213 (http://forum.gsmhosting.com/vbb/showpost.php?p=4166847&postcount=2213)
2) Substitute the contents of your LoquendoTTS folder with contents of (1) above.
3) Use TTHome to remove undesired computer voices.
4) Get your preferred computer voices from post #537 (http://forum.gsmhosting.com/vbb/showpost.php?p=3903078&postcount=537) ; install manually the cab(s) INSIDE LoquendoTTS folder.

That's it.

[dsa8310]

...Install the CAB over the top of device main storage...
...install manually the cab(s)...


When I say "install the cab", I mean "extract the contents of the cab".

[rytenuff]

Here is Albert's latest map and now ( beta) ttsystem patcher;

Now patches home.ddl & ttsytem files
thanx to yDG.....................(the patchman)

Beta. please test.
Albert

EA5 v0.57.15 http://www.ipmart-forum.com/attachment.php?attachmentid=482282&d=1237639512
Howc to text. http://www.ipmart-forum.com/attachment.php?attachmentid=482524&d=1237759525
EA5 v0.57.16 http://www.ipmart-forum.com/attachment.php?attachmentid=483592&d=1238026657

[rytenuff]

Re. above

RELEASE NOTES

v0.57.16beta released, now checks for updates on load, patches ttsystem & home.dll files, please test and report bugs accordingly, removed e-mail albert as i'm getting emails in languages i don't speak.........lol

v0,57.15 released, now includes: [English],[Dutch],[Swedish],[Eesti], and [Danish] translations, don't shoot me, shoot the translators.

[uberdude]

Here is Albert's latest map and now ( beta) ttsystem patcher;

Now patches home.ddl & ttsytem files
thanx to yDG.....................(the patchman)

Beta. please test.
Albert

EA5 v0.57.15 http://www.ipmart-forum.com/attachment.php?attachmentid=482282&d=1237639512
Howc to text. http://www.ipmart-forum.com/attachment.php?attachmentid=482524&d=1237759525
EA5 v0.57.16 http://www.ipmart-forum.com/attachment.php?attachmentid=483592&d=1238026657

got to say i'm very impressed with this auto patcher.
very nice work indeed.

[tendriver]

Here is Albert's latest map and now ( beta) ttsystem patcher;

Now patches home.ddl & ttsytem files
thanx to yDG.....................(the patchman)

Beta. please test.
Albert

EA5 v0.57.15 http://www.ipmart-forum.com/attachment.php?attachmentid=482282&d=1237639512
Howc to text. http://www.ipmart-forum.com/attachment.php?attachmentid=482524&d=1237759525
EA5 v0.57.16 http://www.ipmart-forum.com/attachment.php?attachmentid=483592&d=1238026657

V57.16 has MAJOR problems!!!! I've emailed Albert about them.

[rytenuff]

I'm sure he would appreciate feedback from anyone on this forum who tries it.

[uberdude]

ive tried it on a backup of 3 of my systems i have on my laptop with me. it seemed to generate the relevant dct files for all the maps and cams etc also seemed to patch the ttsystem files etc, but i dont have my tomtom it self with me to test the finished results.

[gaz4660]

Postcode files

1. Download the file below and save it to your computer.

http://www.tomtom.com/updates/zipcodes/map7/wezipcodes715.zip

2. Extract the contents of the downloaded file to your desktop (on PC right-click the downloaded file and select Extract to).

You will now have a folder called 'zip' on your desktop.

3. Connect your TomTom device to your computer.

4. If you are using a PC click Start > My Computer and double-click the icon for your TomTom device.

If you are using a Mac click the icon for your TomTom device on your desktop.

5. Copy the complete 'zip' folder to your TomTom device.

Note: The 'zip' folder should be copied to the 'root' of your TomTom device. This means not inside one of the folders.

[flextest]

GO910 QUESTION. ffrom previous page,
Thanks for your help so far, loads of great people helping here.
I still have a few questions, blnk bits missing i need answered before i can start.

have Go910 App6.020(6690/060420) OS:1144
GPS V1.21, boot 4.29
W and CE V650.1052

OK, Do i need to first update my TT from the TT home page to get latest APP version.?
I have the easyusetool from Rytenuff (thanks) but it says i can only use for a 910 -V.7900 and V 815.2024 maps. Is this correct?
I have looked for V7.900 but wont the TT home update to this?
All v815 maps are from rappid download as pt1,2,3,4 etc. Do i need all these as rappid DL says my DL has exceeded my limit. Do i need to subscribe, or is there another place to DL?
Do i need TThome installed on the PC i am using to update on? (am at work at the moment)
The yDGpatch.exe says it will only work on V7 and v8 navcore.(i only have v6.020)
If i can get this far, then i might understand the rest.
Thanking you in advance

as i said in my first post, i am a comlete neewbe to this, and am trying to get my head around this. Sorry for sounding dunb to the majority of you out there.

Flex

[gaz4660]

Postcode files

1. Download the file below and save it to your computer.

http://www.tomtom.com/updates/zipcodes/map7/wezipcodes715.zip

2. Extract the contents of the downloaded file to your desktop (on PC right-click the downloaded file and select Extract to).

You will now have a folder called 'zip' on your desktop.

3. Connect your TomTom device to your computer.

4. If you are using a PC click Start > My Computer and double-click the icon for your TomTom device.

If you are using a Mac click the icon for your TomTom device on your desktop.

5. Copy the complete 'zip' folder to your TomTom device.

Note: The 'zip' folder should be copied to the 'root' of your TomTom device. This means not inside one of the folders.

sorry this is the updated v801 postcodes

http://www.megaupload.com/?d=E8PJGBN1

[mathiaskt]

Do you guys know what has actually changed on this postcode file? the file was last modified in May2008. I am missing someting here?

Mathias,

[tendriver]

sorry this is the updated v801 postcodes

http://www.megaupload.com/?d=E8PJGBN1

Thanx. Guess you didn't bother searching before you posted. A link to v801 was posted on March 23 in post #3071.

[flextest]

I've just learned that people are confused about how to use a dsa_navcore.nnnn.zip ; with the risk of annoying some, here's the howto:

1) Download the latest set of dsa navcores from post #2903 (http://forum.gsmhosting.com/vbb/showpost.php?p=4254494&postcount=2903)
2) Open desired navcore, ex. dsa_navcore.8302.zip for NC v8.302
3) Read file weblink.txt, it's a link to TT's original/official CAB[inet] file for NC v8.302; download the cab file.
4) Install the CAB over the top of device main storage.
5) Install PNDNavigator and ttsystem from dsa_navcore.8302.zip over the top of device main storage.
6) Disconnect device from PC, let it start-up fully.
7) Reconnect device to PC, fully; disconnect at any time in order to start-up again. Now, all memory savings are effective, forever.

Needless to say, PNDNavigator is map-patched and ttsystem is menu-patched in full.

People willing to have a working LoquendoTTS - of newest version, 7, could do these steps too:

1) Get the prototypical LoquendoTTS folder, with Dave and Susan, from post #2213 (http://forum.gsmhosting.com/vbb/showpost.php?p=4166847&postcount=2213)
2) Substitute the contents of your LoquendoTTS folder with contents of (1) above.
3) Use TTHome to remove undesired computer voices.
4) Get your preferred computer voices from post #537 (http://forum.gsmhosting.com/vbb/showpost.php?p=3903078&postcount=537) ; install manually the cab(s) INSIDE LoquendoTTS folder.

That's it.

Ok i have been playing with my 910, using the above procedure, but it will now not come up and run. I coppied the cab file on to the main root dir, and coppied over the dsa_navcore 8.320 files ttsystem and PND files.

Is there something i am doing wrong?
Thanks

[tendriver]

Here is Albert's latest map and now ( beta) ttsystem patcher;

Now patches home.ddl & ttsytem files
thanx to yDG.....................(the patchman)

Beta. please test.
Albert

EA5 v0.57.15 http://www.ipmart-forum.com/attachment.php?attachmentid=482282&d=1237639512
Howc to text. http://www.ipmart-forum.com/attachment.php?attachmentid=482524&d=1237759525
EA5 v0.57.16 http://www.ipmart-forum.com/attachment.php?attachmentid=483592&d=1238026657

V57.16 has MAJOR problems!!!! I've emailed Albert about them.

Albert is aware of the problems with v0.57.16 and is working on a fix. Stay tuned!!

[rytenuff]

"I have the easyusetool from Rytenuff (thanks) but it says i can only use for a 910 -V.7900 and V 815.2024 maps. Is this correct?"

No. You need to read everything in the docs with an eye on when it was posted.

The EasyUseTools won't patch Navcores (ttsystem files) from 7.900 onwards. That is why yDGpatcher is included in the package. It will patch the Navcore which is meant for your TT device so that it will accept pirated maps. v825.xxxx maps were not introduced when TTuser wrote the "readmenot" doc. The EasyUsetools WILL patch the v825 maps.
Again, the yDGpatcher doc was written before the v8.25 maps were released. The examples given.........

REMEMBER: This is to enable 'compatible' maps to run on 'official' App/Navcore direct from TT via Home. It will make your device run as STANDARD, not emulate another 'higher' device.. ie..

A 520 will run App v8300 & v815.2003 map & look like a 520
A 910 will run App v7900 & v815.2024 map NOT v815.2003, & look like a x10 NOT an x40

Your device will have all STANDARD functionality as per 'Original'/'Official' TomTom release. If you require non-standard features, use the pre-patched SE versions.

....are only examples of what was current at the time. It WILL patch later Navcores which are current for your device NOW.

[tendriver]

For You Speed Cam Users
Courtesy of nils16.
This is basically the same as the Mavericks, except there are both Germany & English versions.


New speed cams from www.scdb.info (http://www.anonym.to/?http://www.scdb.info)
The best speedcam Database for Europe!

All country's which are available. Separately POIS (.ov2). Copy this in your MAP Folder.
Set up "Warnings" in the settings in your TomTom if you will.
Check out the Map with all speedcams here: http://www.scdb.info/en/software-karte/ (http://www.anonym.to/?http://www.scdb.info/en/software-karte/)
New Speedcams added currently:
http://www.scdb.info/en/software-blitzerneu/ (http://www.anonym.to/?http://www.scdb.info/en/software-blitzerneu/)

Update from Today: 26th March 2009

Rapidshare:

Mirror 1: http://rapidshare.com/files/213817064/SCDB090326.rar (http://www.anonym.to/?http://rapidshare.com/files/213817064/SCDB090326.rar)

Mirror 2: dlc only: http://rs-layer.com/directory-202858-hc4dzl3d.html (http://www.anonym.to/?http://rs-layer.com/directory-202858-hc4dzl3d.html)
Status: http://rs-layer.com/status-202858-hc4dzl3d.png

I upload here the database (http://www.ipmart-forum.com/showthread.php?p=2594240#) about 1-3X per month. Should I forget or you wish a fresh update send me a PM :-)

Note: I made the file 5MB big, so i get points. I do that because I bought a account from

scdb.info, and I share those free with you. There is 1 RAR file inside which you can delete. Hope that is OK so for you.

[test67test67]

Thanks to all the great help here I have managed to get my OneXL (Version 1) fully working.
Navcore 8.410SE
UK & Ireland map V825.2157
All working with ALG, IQR and TTS

On the volume I get an option of Link volume to noise level, which doesn't seem to do anything, on older Navcores I used to get Link volume to speed which I would prefer, any ideas ?

Also I like the idea of automatically switching to night colours, I know my XL has not got a light sensor, but could use sunset/sunrise tables, but I can't see any options for this.

Any help of these 2 minor issues would be great.
Thanks.

[tendriver]

Thanks to all the great help here I have managed to get my OneXL (Version 1) fully working.
Navcore 8.410SE
UK & Ireland map V825.2157
All working with ALG, IQR and TTS

On the volume I get an option of Link volume to noise level, which doesn't seem to do anything, on older Navcores I used to get Link volume to speed which I would prefer, any ideas ?

Also I like the idea of automatically switching to night colours, I know my XL has not got a light sensor, but could use sunset/sunrise tables, but I can't see any options for this.

Any help of these 2 minor issues would be great.
Thanks.

I can't help you with the volume issue.
Does a One XL have a built in mike? If so, you should be able to Voice Command Day/Night view. If not, look here:
http://www.webazar.org/tomtom/suntime.php?lang=uk

[tendriver]

Courtesy of BenBBS
Ok good news...well for me anyway:dance Version 1.6B

After many many hours developing and testing this prog im @v 1.6B
and works fine for me.

The prog.. works with XP and Vista (http://www.ipmart-forum.com/showthread.php?t=343210#).....Sorry to MAC and DOS users

As you can see by the pic its been tested and works with 4Maps on SDcard will work with more

what it will do is patch official TT ttsystem only and PNDNavigator depending on your system

Backup ttsystem or PNDNavigator to in the program folder just in case

.Dct all Maps on TT internal mem or SD card including speedcam....
IT WILL FIND ALL MAPS AND SPEEDCAMS ON YOUR DEVICE

Remove trash from program so TT is left as was

Will work with USB flash card reader with TT Sdcard

http://www.ipmart-forum.com/attachment.php?attachmentid=483784&stc=1&d=1238096811


TomTom Keygen 2009 v1.6B.zip (http://www.ipmart-forum.com/attachment.php?attachmentid=483785&d=1238096811)

[r4tb0x]

Hi there,

I've just gotten a hold of a second hand TomTom, and I really don't know much about them. I've been reading a few things online, and trying to make sense of the TomTom v8 Map sticky thread in this forum, and I have a few basic questions to try and make sense of things. I hope someone will be able to spend a few moment just clearing a few things up for me.

I'm not really sure what version of TomTom I have. It's a TomTom One, and on the bottom it has N14644 Canada 310. What does this tell me about the device?

I can't see anywhere that an SD card would be used, so I assume it's got internal memory?

It has a v7 USA and Canada map installed on it (I think - that's the version I see when I click on the bottom right of the screen when in driving mode).

I downloaded TomTom Home, connected my device and updated to v8 of software. Is this the Navcore I have been reading about?

I've done a full Backup of my device in preparation of trying to install the v8.25 USA and Canada maps I have downloaded from an FTP site. The instructions with the download only included some meta information, which no instructions on how to use it. I've been reading through the thread like I mentioned, but so far it's not making much sense.

I've seen PDA and PNA used. Am I right in thinking PNA is a TomTom device rather than TomTom software running on a PDA?

Sorry this post is a bit all over the place, I am just writing questions as I try and make sense of all this in my head

[uberdude]

Hi there,

I've just gotten a hold of a second hand TomTom, and I really don't know much about them. I've been reading a few things online, and trying to make sense of the TomTom v8 Map sticky thread in this forum, and I have a few basic questions to try and make sense of things. I hope someone will be able to spend a few moment just clearing a few things up for me.

I'm not really sure what version of TomTom I have. It's a TomTom One, and on the bottom it has N14644 Canada 310. What does this tell me about the device?

I can't see anywhere that an SD card would be used, so I assume it's got internal memory?

It has a v7 USA and Canada map installed on it (I think - that's the version I see when I click on the bottom right of the screen when in driving mode).

I downloaded TomTom Home, connected my device and updated to v8 of software. Is this the Navcore I have been reading about?

I've done a full Backup of my device in preparation of trying to install the v8.25 USA and Canada maps I have downloaded from an FTP site. The instructions with the download only included some meta information, which no instructions on how to use it. I've been reading through the thread like I mentioned, but so far it's not making much sense.

I've seen PDA and PNA used. Am I right in thinking PNA is a TomTom device rather than TomTom software running on a PDA?

Sorry this post is a bit all over the place, I am just writing questions as I try and make sense of all this in my head

connect the device to the pc but dont start tomtom home. if it does start exit it.
find and remove the current map folder from your device and replace with the map you intend to use.
download and execute the file posted in the post above yours while still connected to the pc it should take seconds to patch the navcore and activate the map.

[dsa8310]

Ok i have been playing with my 910, using the above procedure, but it will now not come up and run. I coppied the cab file on to the main root dir, and coppied over the dsa_navcore 8.320 files ttsystem and PND files.

Is there something i am doing wrong?
Thanks

You did EXTRACT navcore_8.320.9901.go530-go730-go930.cab in the root directory, did you not ?
(Even after only doing this step, a go910 should come up, but neither map nor menu patched, of course)

If so, then this procedure is not for you. :)

[r4tb0x]

connect the device to the pc but dont start tomtom home. if it does start exit it.
find and remove the current map folder from your device and replace with the map you intend to use.
download and execute the file posted in the post above yours while still connected to the pc it should take seconds to patch the navcore and activate the map.

The maps I downloaded USA and Canada Full v8.25.2157 (North_America_v815_2157) is 1.66gb on my PC, but my TomTom only has 1gb internal memory. Do I need a different version of the maps, or is there something I need to cut out of the one I have?

[tendriver]

The maps I downloaded USA and Canada Full v8.25.2157 (North_America_v815_2157) is 1.66gb on my PC, but my TomTom only has 1gb internal memory. Do I need a different version of the maps, or is there something I need to cut out of the one I have?

Without a card slot, you need USA & Canada 825.2159. (826 MB)

http://linksave.in/29429325349aa6f06e9bcc

; USA_and_Canada_825_2159
89 07 86 10 9A 5F 4D 5D 1F 7D E8 0D 79 B1 89 D1 USA_and_Canada-27.meta

[rytenuff]

tomtomtool package.




this all-in-one package contains the latest version of
ttuser's easyusetools dated 23rdfeb ( check properties ) and all the new meta ****fish codes at time of posting. (courtesy of ttuser)
plus:
instructions for use.
changelog.
"how to crack a map" simple to follow instructions.
winrar 3.80 pro ready registered. To unpack and join your downloaded maps.
ydgpatcher_1.2.16.14 (latest) with readme (courtesy of yddraiggoch)

http://www.2shared.com/file/4977440/b43ac38d/tomtomtool_package.html

this is password protected. Pm me for password.

Please note that this package is now deleted. All the items are available as individual posts elsewhere in the forum.

[pictopicto]

@ Rytenuff, Mo, Tendriver, Bu,

Do you recall the tomtom i could not get past the start up screen???

You all tried to help with various files to get it working but to no avail.

i then sent it in the post to Mo to see if he could fix it, but he could not even get it to connect to his pc (Mo i know i havent sent the cheque for the postage yet , i promise i will i have been away a lot for work recently..sorry i will do it this weekend for you, i promise...).
Anyway Mo couldnt get it working so sent it back to me and i thought, sod it i will send it to tomtom to repair it and my mate will have to accept the cost.

Well i sent it thru and it came back yesterday whilst i was away.

Amazingly they have repaired it for free :D:D:D

but even better than that they not only repaired it (replaced mainboard) but also my 512mb tomtom v3 came back with a 1gb memory and a european map on it.:eek::eek::eek:

I now feel a bit ashamed downloading dodgy maps from here to circumvent the costs when they do this.....they are not all bad are they?

[kenta2]

I wonder what means SE version of Navcore

[tendriver]

I wonder what means SE version of Navcore

A version that can be used on a device that it wasn't designed for. IE, a x40 Navcore on a TT 720.

[uberdude]

I now feel a bit ashamed downloading dodgy maps from here to circumvent the costs when they do this.....they are not all bad are they?

lol i wouldn't worry about it. personally i bought the 825.2159 uk and roi map and the full year updates as it was half price and only cost me £40.00.

i have downloaded other versions though for free and even though i paid for my map i'm running a hacked version at the moment.
i just like to hack things so i know that i can.

[msubedar]

@ Rytenuff, Mo, Tendriver, Bu,

Do you recall the tomtom i could not get past the start up screen???...

Hey Picto, just a quick query, when you got it back from me, were you actually able to get it connected to your computer and access the Internal Drive as in actually go into it and see the files etc? Because I wasn't able to do this I did suspect it was the board which may have got damaged, which is what they changed. All for the good hey!!! ;)

Mo.

[tendriver]

Tripmaster v2.1

Here is a handy tool some of you might be interested in, particularly if you use your TT in you work.

http://www.webazar.org/tomtom/tripmaster.php?lang=uk

The web page tells what all it will do.

[pictopicto]

Hey Picto, just a quick query, when you got it back from me, were you actually able to get it connected to your computer and access the Internal Drive as in actually go into it and see the files etc? Because I wasn't able to do this I did suspect it was the board which may have got damaged, which is what they changed. All for the good hey!!! ;)

Mo.

Hey Mo

it was fine i could connect it ok to computer.

weird eh .....

[msubedar]

Hey Mo

it was fine i could connect it ok to computer.

weird eh .....

Very Very Very Weird Indeed..... Glad its all sorted out though.

[toto2648]

Great Works Thankssssssssss

[McCarthyqE]

Salute!, that's true http://sourceradix.com/m/f277.html

[r4tb0x]

Without a card slot, you need USA & Canada 825.2159. (826 MB)

http://linksave.in/29429325349aa6f06e9bcc

; USA_and_Canada_825_2159
89 07 86 10 9A 5F 4D 5D 1F 7D E8 0D 79 B1 89 D1 USA_and_Canada-27.meta

r04-r07 are corrupt :(

But thanks for the info on which version I need :)

[tendriver]

r04-r07 are corrupt :(

But thanks for the info on which version I need :)

They are not corrupt!! I downloaded it yesterday. Had no problem unzipping, installing or running the map.

[tendriver]

salute!, that's true http://sourceradix.com/m/f277.html

this link to drugs is not welcomed here!!!!!!!!!

[msubedar]

NEW SPEED CAMERA'S & META.TXT FILE - 28-03-09

http://www.2shared.com/file/5197918/3a5a1b11/Cameras__Meta_28-03-09.html

Courtesy of The Maverick

Just a quick tip: the .ver files are not needed to enable the use of the speed cams Thanks to Tendriver.

Safety_Cam_AT_TomTom_2335
Safety_Cam_BE_TomTom_2336
Safety_Cam_DE_TomTom_2337
Safety_Cam_ES_TomTom_2338
Safety_Cam_FI_TomTom_2339
Safety_Cam_FR_TomTom_2340
Safety_Cam_UK_TomTom_2341
Safety_Cam_IT_TomTom_2342
Safety_Cam_NL_TomTom_2343
Safety_Cam_NO_TomTom_2344
Safety_Cam_PT_TomTom_2345
Safety_Cam_SE_TomTom_2346
Safety_Cam_PL_TomTom_2347
Safety_Cam_CZ_TomTom_2348
Safety_Cam_ZA_TomTom_2349
Safety_Cam_AU_TomTom_1993
Safety_Cam_UK_Premium_2355

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.

To install:
You don't need the PNA or META from a map.
What you do need is:
Download EasyUseTools (Keygen).
The two files .VER and .Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID
Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

(Installation instructions thanks to Rytenuff)

PS. There are many new patching tools now to choose from that are very easy to use that you can find on previous posts.

Enjoy & Please show your Appreciation!!!

Mo.

[algram]

Help again needed:
not sure if this is the right thread but..

I have successfully installed TT Navigator 7.910.9185 on my HTC touch hd. It runs in the device without any problem. (The ttnavigator.bif says that the phone model is HTC-Blackstone). But I am not able to get the Eastern Europe 8.25_2159 map working in it. The program loads and says "no maps found"

I tried to patch them the same way as I do for my GO910, I am able to get the .dct file and copy into the map folder but it still doesn't work.

Maybe I put the map folder into incorrect place on my device?

All TT navigator files are on E:/Program Files/Navigator/ I put the mapfolder into that directory as I do in a PNA.

Any advice would be very appreciated. Thanks

[algram]

Help again needed:
not sure if this is the right thread but..

I have successfully installed TT Navigator 7.910.9185 on my HTC touch hd. It runs in the device without any problem. (The ttnavigator.bif says that the phone model is HTC-Blackstone). But I am not able to get the Eastern Europe 8.25_2159 map working in it. The program loads and says "no maps found"

I tried to patch them the same way as I do for my GO910, I am able to get the .dct file and copy into the map folder but it still doesn't work.

Maybe I put the map folder into incorrect place on my device?

All TT navigator files are on E:/Program Files/Navigator/ I put the mapfolder into that directory as I do in a PNA.

Any advice would be very appreciated. Thanks


Already solved! :)- The map folder had to be an the root directory of the storage card ( E:/) .

found it in other forum - http://forum.xda-developers.com/showthread.php?t=432410&page=8

[msubedar]

Help again needed:
not sure if this is the right thread but..

I have successfully installed TT Navigator 7.910.9185 on my HTC touch hd. It runs in the device without any problem. (The ttnavigator.bif says that the phone model is HTC-Blackstone). But I am not able to get the Eastern Europe 8.25_2159 map working in it. The program loads and says "no maps found"

I tried to patch them the same way as I do for my GO910, I am able to get the .dct file and copy into the map folder but it still doesn't work.

Maybe I put the map folder into incorrect place on my device?

All TT navigator files are on E:/Program Files/Navigator/ I put the mapfolder into that directory as I do in a PNA.

Any advice would be very appreciated. Thanks

I'm not 100% sure if this is correct on the HTC but its worth a try from my experience, Don't put the map folder in the Navigator folder, put it E:/Program Files/"here" so alongside the Navigator folder and I think it should then recognize it as if i remember correctly, in the Ipaq's (Windows system) the directory for the map was not in the Navigator folder. Give it a shot, nothing to lose hey.

Mo.

[r4tb0x]

connect the device to the pc but dont start tomtom home. if it does start exit it.
find and remove the current map folder from your device and replace with the map you intend to use.
download and execute the file posted in the post above yours while still connected to the pc it should take seconds to patch the navcore and activate the map.

I connected the TomTom to the PC and TomTom Home didn't start.

I removed the old version of the USA_and_Canada maps from the device and copied the v815.2159 version across in it's place.

I downloaded and ran the v8 TomTom KeyGen and TTSystem Patcher that was posted.

I clicked on the KeyGen button and it said I had all the .dtc files for the map. I then clicked on the Patch button and after a wait a message came up sayign "Wrong system or already patched". I closed the keygen down, disconnected the TomTom from the PC and started it up, The device now shows on the screen "Problem with map. You cannot use this map on this device: USA_and_Canada"

I thought I'd followed your instructions word for word. What else have I missed for this error to appear?

Before I followed any of these instructions, I had used TomTom Home to patch my device to 8.010 (I think was the number). I don't know if this makes a difference.

Any help would be appreciated.

I did make a full back up of the device using TomTom home before I did anything, so hopefully I don't have a bricked device.

[tendriver]

I connected the TomTom to the PC and TomTom Home didn't start.

I removed the old version of the USA_and_Canada maps from the device and copied the v815.2159 version across in it's place.

I downloaded and ran the v8 TomTom KeyGen and TTSystem Patcher that was posted.

I clicked on the KeyGen button and it said I had all the .dtc files for the map. I then clicked on the Patch button and after a wait a message came up sayign "Wrong system or already patched". I closed the keygen down, disconnected the TomTom from the PC and started it up, The device now shows on the screen "Problem with map. You cannot use this map on this device: USA_and_Canada"

I thought I'd followed your instructions word for word. What else have I missed for this error to appear?

Before I followed any of these instructions, I had used TomTom Home to patch my device to 8.010 (I think was the number). I don't know if this makes a difference.

Any help would be appreciated.

I did make a full back up of the device using TomTom home before I did anything, so hopefully I don't have a bricked device.

You haven't "bricked" your device. Download this patching tool:

http://rapidshare.com/files/205854511/yn_fawr.rar (http://rapidshare.com/files/205854511/yn_fawr.rar)

Use it to patch your Navcore ttsystem file & your TT Home dll file.

If you map has a good created .dct file, then that should do it.

[r4tb0x]

You haven't "bricked" your device. Download this patching tool:

http://rapidshare.com/files/205854511/yn_fawr.rar (http://rapidshare.com/files/205854511/yn_fawr.rar)

Use it to patch your Navcore ttsystem file & your TT Home dll file.

If you map has a good created .dct file, then that should do it.

I have just decided to restore the back up of the original map I had as I ened the device to go somewhere. I'll try and patch it again when I get home and I'll let you know how it goes.

Thanks for the help!

[msubedar]

I have just decided to restore the back up of the original map I had as I ened the device to go somewhere. I'll try and patch it again when I get home and I'll let you know how it goes.

Thanks for the help!

If this helps then here is a 8.010 version ttsystem file i have got posted up: http://www.2shared.com/file/4646425/9c403fe4/ttsystem.html

With this it should work like tendriver said if you have correctly created the .dct file.

Also here is the patched home.dll file: http://rapidshare.com/files/193486746/Navcore.8.010.9369_tomtom.com.rar

Mo.

[gaz4660]

dose any one know where you can select waypoints i cant find it in navcore v8.

[Doctormobile_14]

thanks for information :)

[tendriver]

Have any of you Speed Cam users with a 8.2, 8.3 or 8.4 Navcore noticed any speed cams not showing up? Ones for your direction of travel only that are missing?

[msubedar]

Have any of you Speed Cam users with a 8.2, 8.3 or 8.4 Navcore noticed any speed cams not showing up? Ones for your direction of travel only that are missing?

I've got running 8.310 and I have not noticed any problems i don't think with UK cams, I will be using my TT much more from next week so will let you know if i notice anything of the sort.

Mo.

[tendriver]

dose any one know where you can select waypoints i cant find it in navcore v8.

Is not Itinerary Planning on page 3 what you are looking for?

[msubedar]

dose any one know where you can select waypoints i cant find it in navcore v8.

Is not Itinerary Planning on page 3 what you are looking for?

You are absolutely correct there tendriver, Itenery planning is what you are looking for. Also if you create a normal route, then go to navigate alternative and then select "travel via".... then this can also enable you to go somewhere first before going to your final destination.

Mo :cool:

[tendriver]

Have any of you Speed Cam users with a 8.2, 8.3 or 8.4 Navcore noticed any speed cams not showing up? Ones for your direction of travel only that are missing?

I've got running 8.310 and I have not noticed any problems i don't think with UK cams, I will be using my TT much more from next week so will let you know if i notice anything of the sort.

Mo.

Thanx Mo. As I said, in particular, cams set up for your direction of travel.

[msubedar]

Thanx Mo. As I said, in particular, cams set up for your direction of travel.

Yeah, My original TT cam's only beep when its in the correct direction anyway which is the way I prefer it anyway so nope not noticed anything for cams only on your direction of travel.

[tricia clay]

Have any of you Speed Cam users with a 8.2, 8.3 or 8.4 Navcore noticed any speed cams not showing up? Ones for your direction of travel only that are missing?


you know what i do and so far no probs mate !!,i i`ve selected warn for fixed and average speed cams only,as selecting all seems to bring up loads of cams that aren`t there.
regards

[wannscan]

Have any of you Speed Cam users with a 8.2, 8.3 or 8.4 Navcore noticed any speed cams not showing up? Ones for your direction of travel only that are missing?

You beat me to it mate. For ages one set of 40mph cameras haven`t been showing not far from my home. At first i thought there was missing 40`s but on other planned or unplanned routes the 40 cams worked fine. My theory is and please correct me if its way off, But the two 40mph cams near my home are sitting bang at the side of each other? In other words could they be cancelling each other out now that the new cams are set to pick up only on the direction your heading? :confused: i`ll get back with coordinates if someones can solve this.

[tendriver]

you know what i do and so far no probs mate !!,i i`ve selected warn for fixed and average speed cams only,as selecting all seems to bring up loads of cams that aren`t there.
regards

Thanx. What NC & map version did you end up using?

[tendriver]

Here is the latest POIHandler speedcam database, fixed & mobile, for TomTom. Play with it and give me feedback.


http://www.2shared.com/file/5205589/b408b1fe/POIhandler_Speed_Cams.html

Courtesy of Gerry5039

[wannscan]

I still cant upload any screen shots or rar file to this site? so ive created a poi of the missing 40mph cams near to where i live. Although when im logged in at the very bottom in posting rules the display reads as ,

Posting Rules
You may post new threads
You may post replies
You may post attachments
You may edit your posts


But never mind the only coordinates i can get of the two cams that never appear near to my address are.

40mph speed cam coordinates are in uk, sheffield A61 On hallifax road.

53.42581 -1.49241
53.42585 -1.49269

My maps are United_Kingdom_and_Republic_of_Ireland_815_2003 and navcore v8204.
I`ll try what tricia clay posted to do earlier as soon as my mate has done with my tomtom (borrowed it for golf sites) as i know my tomtom is set to warn for all fixed cams and this could be what ive done wrong. However the two cameras my post is about are fixed and are still active as my dad found out only recently to his cost.
So thanks in advance for anyone who can who can take time out to see if there tomtom shows the cameras mine doesn`t.
Or any advice on how to put up any attachements on this site?
thanks.
wannscan.

[rytenuff]

Or any advice on how to put up any attachements on this site?
thanks.
wannscan.

Looooooooooooooong time problem here!

See this thread: http://forum.gsmhosting.com/vbb/showthread.php?t=597793

Nobody cares.

[tricia clay]

Thanx. What NC & map version did you end up using?

for now 8410, 825.2157 uk&roi until new stick arrives then will attempt to recover data connection for quickfix and tomtom weather,with 8310,over 7903 correctly configured.
wish me luck
incidntaly i am using the 23/3/09 cams.in both directions

[rytenuff]

Albert's EasyActivator5

Activates map folder including contents, i.e. Radars, Fuel.........

Submit New Meta button (only enabled when my server is up!)

Download Albert's Meta.txt (again........only enabled when my server is up!)

when you submit a new meta it will be added to my meta.txt immediately!

never have to go hunting for meta details again, the meta.txt on my server will always be the most up to date.

no files are saved to your pc, no registry entries are made, nothing!

run directly from the zip, no need to unzip.

the keygens and meta.txt are created when it runs, along with any dependancy files.


v0.57.17 ironed out loadsa bugs, now doesn't flag errors for poi's not in meta.txt, holds completion msg until process is finished, patches ttsystem (PNDNavigator if it's present), patches home.dll. original ttsystem/PNDNavigator/home.dll backed up first so you can undo if you need to?

v0.57.16beta patches ttsytem / PNDNavigator / home.dll. binned the check for updates bit.

v0,57.15 released, now includes: [English],[Dutch],[Swedish],[Eesti], and [Danish] translations, don't shoot me, shoot the translators.

v0.57.14 released, new meta.txt embedded, upload/download paths changed, faster load time, upload meta error on server 2 now fixed, old server upload/download folder will be removed in approx 2 weeks, then previous versions will not be able to make contact with my server.


EAS v0.57.17 (http://www.ipmart-forum.com/attachment.php?attachmentid=484429&d=1238262077)

[wannscan]

Or any advice on how to put up any attachements on this site?
thanks.
wannscan.

Looooooooooooooong time problem here!

See this thread: http://forum.gsmhosting.com/vbb/showthread.php?t=597793

Nobody cares.

O.k see what you mean cheers anyway.

[tendriver]

O.k see what you mean cheers anyway.

I have NEVER been able to upload attachments. I have complained numerous times, to no avail!!!! :mad::mad::mad:

[tendriver]

Albert's EasyActivator5

Activates map folder including contents, i.e. Radars, Fuel.........

Submit New Meta button (only enabled when my server is up!)

Download Albert's Meta.txt (again........only enabled when my server is up!)

when you submit a new meta it will be added to my meta.txt immediately!

never have to go hunting for meta details again, the meta.txt on my server will always be the most up to date.

no files are saved to your pc, no registry entries are made, nothing!

run directly from the zip, no need to unzip.

the keygens and meta.txt are created when it runs, along with any dependancy files.


v0.57.17 ironed out loadsa bugs, now doesn't flag errors for poi's not in meta.txt, holds completion msg until process is finished, patches ttsystem (PNDNavigator if it's present), patches home.dll. original ttsystem/PNDNavigator/home.dll backed up first so you can undo if you need to?

v0.57.16beta patches ttsytem / PNDNavigator / home.dll. binned the check for updates bit.

v0,57.15 released, now includes: [English],[Dutch],[Swedish],[Eesti], and [Danish] translations, don't shoot me, shoot the translators.

v0.57.14 released, new meta.txt embedded, upload/download paths changed, faster load time, upload meta error on server 2 now fixed, old server upload/download folder will be removed in approx 2 weeks, then previous versions will not be able to make contact with my server.


EAS v0.57.17 (http://www.ipmart-forum.com/attachment.php?attachmentid=484429&d=1238262077)

V17 has 1 Major Problem that Albert has been made aware of.

[tendriver]

My maps are United_Kingdom_and_Republic_of_Ireland_815_2003 and navcore v8204.
wannscan.

Time to update that map to 825!!!!! :D:D

[r4tb0x]

You haven't "bricked" your device. Download this patching tool:

http://rapidshare.com/files/205854511/yn_fawr.rar (http://rapidshare.com/files/205854511/yn_fawr.rar)

Use it to patch your Navcore ttsystem file & your TT Home dll file.

If you map has a good created .dct file, then that should do it.

Ok, I got back to trying this again, and I wonder if I am missing a step.

This is what I have done so far

1) Deleted USA_and_Canada from device
2) Copied new USA_and_Canada to device
3) Copied ttgo.bif from device to PC and opened with notepad to get device ID of AKSZW ASJ7A
4) Used RunMeForDTC.cmd in the EasyUseTools pack to generate the .dct file using option 1 and then 2 (since the new map was already copied to my device)
5) Tried to patch ttsystem on my device using yDGpatch v1.2 and get the following message:
"Error - np01
Unable to complete operation
Reasons: invalid <filename> OR already patched"

When I disconnect the device from the PC and turn it on I get the red Problem with Map screen.

Someone posted a patched ttsystem for me to use, the file was called ttsystem.dat. I tried replacing my ttsystem (no extension) with this one, and when I disconnected the device from the PC the device had a big red cross on the screen (i assumed because of the name of the ttsystem.dat file). I reconnected the device and renamed ttsystem.dat to ttsystem with no extension and disconnected the device. When it restarted it just hung at the start up screen. I had to do a hard reset to get it to power down. I reconnected it and replaced the ttsystem with the original one that I had copied to the PC before using the hacked one someone posted.

Have I missed some step in patching the ttsystem? Is there something else I am supposed to be doing with the map?

[tendriver]

for now 8410, 825.2157 uk&roi until new stick arrives then will attempt to recover data connection for quickfix and tomtom weather,with 8310,over 7903 correctly configured.
wish me luck
incidntaly i am using the 23/3/09 cams.in both directions

Latest cams are 28/3 here:

http://forum.gsmhosting.com/vbb/showpost.php?p=4296796&postcount=3146

[tendriver]

Ok, I got back to trying this again, and I wonder if I am missing a step.

This is what I have done so far

1) Deleted USA_and_Canada from device
2) Copied new USA_and_Canada to device
3) Copied ttgo.bif from device to PC and opened with notepad to get device ID of AKSZW ASJ7A
4) Used RunMeForDTC.cmd in the EasyUseTools pack to generate the .dct file using option 1 and then 2 (since the new map was already copied to my device)
5) Tried to patch ttsystem on my device using yDGpatch v1.2 and get the following message:
"Error - np01
Unable to complete operation
Reasons: invalid <filename> OR already patched"

When I disconnect the device from the PC and turn it on I get the red Problem with Map screen.

Someone posted a patched ttsystem for me to use, the file was called ttsystem.dat. I tried replacing my ttsystem (no extension) with this one, and when I disconnected the device from the PC the device had a big red cross on the screen (i assumed because of the name of the ttsystem.dat file). I reconnected the device and renamed ttsystem.dat to ttsystem with no extension and disconnected the device. When it restarted it just hung at the start up screen. I had to do a hard reset to get it to power down. I reconnected it and replaced the ttsystem with the original one that I had copied to the PC before using the hacked one someone posted.

Have I missed some step in patching the ttsystem? Is there something else I am supposed to be doing with the map?

What v8 navcore did TT home download for you?

[r4tb0x]

What v8 navcore did TT home download for you?

I'm not sure how I find that out...

Do I have to put my original maps back on the device so I can start it up to find out?

[tendriver]

I'm not sure how I find that out...

Do I have to put my original maps back on the device so I can start it up to find out?

Do whatever you have to do to get it to boot up. Once booted up, tap in the lower right corner. You'll have the Status Summary window. In the lower right you'll see:

version
8.xxx

[r4tb0x]

Do whatever you have to do to get it to boot up. Once booted up, tap in the lower right corner. You'll have the Status Summary window. In the lower right you'll see:

version
8.xxx

I'm on version 8.010

[tendriver]

I'm on version 8.010

Good. That is where you should be. So, now you have a unpatched navcore 8.010 & unpatched map on your TT. Correct?

[r4tb0x]

Good. That is where you should be. So, now you have a unpatched navcore 8.010 & unpatched map on your TT. Correct?

I think so. I've never patched the navcore on anything but TomTom Home (apart from the few attempts I did and then restored the ttsystem) and I am using USA_and_Canada v715.1728

[tendriver]

I think so. I've never patched the navcore on anything but TomTom Home (apart from the few attempts I did and then restored the ttsystem) and I am using USA_and_Canada v715.1728

Here is a link to NC 8.010 with a pre-patched ttsystem file. Without removing anything from your TT, copy everything in this downloaded folder onto your TT.

http://rapidshare.com/files/209333237/navcore_8.010.9369.onev6.rar (http://rapidshare.com/files/209333237/navcore_8.010.9369.onev6.rar)

You've already generated a .dct for your 825 map, so put 825 back on your TT and you should be good to go.

[r4tb0x]

Here is a link to NC 8.010 with a pre-patched ttsystem file. Without removing anything from your TT, copy everything in this downloaded folder onto your TT.

http://rapidshare.com/files/209333237/navcore_8.010.9369.onev6.rar (http://rapidshare.com/files/209333237/navcore_8.010.9369.onev6.rar)

You've already generated a .dct for your 825 map, so put 825 back on your TT and you should be good to go.

Does it matter which order I do this in? Do I need to copy the new navcore before I copy the new maps across?

[tendriver]

Does it matter which order I do this in? Do I need to copy the new navcore before I copy the new maps across?

Order matters not, because you are not gonna reboot till you get both done.

[msubedar]

Does it matter which order I do this in? Do I need to copy the new navcore before I copy the new maps across?

The order does not really matter.......

[tendriver]

The order does not really matter.......

Ya gotta be quicker Mo. http://www.ipmart-forum.com/images/smilies/thsmiley_zzrofl1.gif

[r4tb0x]

Order matters not, because you are not gonna reboot till you get both done.
Ok. Copied contents of .rar file to the device overwriting the files and directories that were there, and am now copying the new map folder to the device. Once that has done (damn slow usb v1.1) I'll generate a .dct file using EasyUseTools and then restart the device and post back with results.

I appreciate you taking the time to explain this to me.

[tendriver]

Ok. Copied contents of .rar file to the device overwriting the files and directories that were there, and am now copying the new map folder to the device. Once that has done (damn slow usb v1.1) I'll generate a .dct file using EasyUseTools and then restart the device and post back with results.

I appreciate you taking the time to explain this to me.

That is what we are here for.

Rather than easyusetools, try EA5. Just follow the steps. For help, click the Help button.

EAS v0.57.17 (http://www.ipmart-forum.com/attachment.php?attachmentid=484429&d=1238262077)

[r4tb0x]

That is what we are here for.

Rather than easyusetools, try EA5. Just follow the steps. For help, click the Help button.

EAS v0.57.17 (http://www.ipmart-forum.com/attachment.php?attachmentid=484429&d=1238262077)

Excellent! Using EA5 was a breeze and it generated the .DCT no problem. Device started up fine and I have the new map installed. Excellent!

Thanks so much!

[tendriver]

Excellent! Using EA5 was a breeze and it generated the .DCT no problem. Device started up fine and I have the new map installed. Excellent!

Thanks so much!

Another satisfied customer!!!!!! http://www.ipmart-forum.com/images/smilies/good2.gif

[tendriver]

Excellent! Using EA5 was a breeze and it generated the .DCT no problem. Device started up fine and I have the new map installed. Excellent!

Thanks so much!

Ya want US Redlight & Speed Cams?

[r4tb0x]

Ya want US Redlight & Speed Cams?

Sure!

I have another question. Now I've got a hacked navcore and map on the device, am I still able to use TomTom home to download map corrections? What should I avoid doing in TomTom Home and what it safe?

[tendriver]

Sure!

I have another question. Now I've got a hacked navcore and map on the device, am I still able to use TomTom home to download map corrections? What should I avoid doing in TomTom Home and what it safe?

Use TT Home just like you always have. I have mine set to auto-start & auto-update.

[crazyinthehead]

Hey everybody! I have a Samsung Blackjack 2 with Windows Mobile 6.1. I've searched for the TOMTOM.cab installation file but can't find it. I understand that the one this phone is compatible with is the TomTom 7 and 8 but not sure Can anyone help plz?...and anybody knows about the maps to Puerto Rico...Are they included in the USA ones? Thanks in advance.

[tendriver]

Hey everybody! I have a Samsung Blackjack 2 with Windows Mobile 6.1. I've searched for the TOMTOM.cab installation file but can't find it. I understand that the one this phone is compatible with is the TomTom 7 and 8 but not sure Can anyone help plz?...and anybody knows about the maps to Puerto Rico...Are they included in the USA ones? Thanks in advance.

I can't help you with your Samsung. I can tell you that there is not a stand alone Puerto Rico map. It is included in NA 825.2157 as well as USA & Canada 825.2159.

[msubedar]

Hey everybody! I have a Samsung Blackjack 2 with Windows Mobile 6.1. I've searched for the TOMTOM.cab installation file but can't find it. I understand that the one this phone is compatible with is the TomTom 7 and 8 but not sure Can anyone help plz?...and anybody knows about the maps to Puerto Rico...Are they included in the USA ones? Thanks in advance.

There is a Stand-alone Peurto Rico V6 map if your interested floating around if you want to search, I did have a link but it is dead now so they are around.

Mo.

[wannscan]

Time to update that map to 825!!!!! :D:D

Yeh all ready to put newer navcore and maps on mate cheers, Im just waiting for my mate to bring back my tomtom as he`s using it for golf sites.
Thanks anyway should have it back by thursday.

[algram]

Hey everybody! I have a Samsung Blackjack 2 with Windows Mobile 6.1. I've searched for the TOMTOM.cab installation file but can't find it. I understand that the one this phone is compatible with is the TomTom 7 and 8 but not sure Can anyone help plz?...and anybody knows about the maps to Puerto Rico...Are they included in the USA ones? Thanks in advance.

If you are referring to this phone http://www.gsmarena.com/samsung_i617_blackjack_ii-2213.php ,

then download TT navigator 7:

first try the qvga version as your phone screen is 320x240

http://www.megaupload.com/?d=B9DX194X

if the icons are too large or it doesn't work, try the VGA version which works well for me:

http://www.megaupload.com/?d=D2OJ6HCX


to install:

connect your phone to PC

transfer the .....cab file to your phone (it's better to put it in the memory card)
disconnect from PC

open the file - it should install itelf

not sure if it's neccesary but connect the device to PC again and change the tomtom navigator.exe with the one you downloaded.

restart the phone. That's it, it should work.

The maps that work with TTN7 are 2159. they need to have a .dct file just like TT GO or TT ONE devices.


Haven't tried but if you want to upgrade maps, move all the TT Navigator files from e.g. Program Files/ Navigator to the root of the memory card. then connect to a PC( note that TT home needs to be patched with yDG) and start TT home. It shoud see your device. When you're over, you can transfer all the file you moved to the root directory back to the Program Files/ Navigator.

Hope it helps;)

[Daniel vl]

Thanks for the cool soft.

[msubedar]

NEW SPEED CAMERA'S & META.TXT FILE - 31-03-09

http://www.2shared.com/file/5225692/4247b40e/Cameras__Meta_31-03-09.html

Courtesy of The Maverick

Just a quick tip: the .ver files are not needed to enable the use of the speed cams Thanks to Tendriver.

Safety_Cam_AT_TomTom_2356
Safety_Cam_BE_TomTom_2357
Safety_Cam_DE_TomTom_2358
Safety_Cam_ES_TomTom_2359
Safety_Cam_FI_TomTom_2360
Safety_Cam_FR_TomTom_2361
Safety_Cam_UK_TomTom_2362
Safety_Cam_IT_TomTom_2363
Safety_Cam_NL_TomTom_2364
Safety_Cam_NO_TomTom_2365
Safety_Cam_PT_TomTom_2366
Safety_Cam_SE_TomTom_2367
Safety_Cam_PL_TomTom_2368
Safety_Cam_CZ_TomTom_2369
Safety_Cam_ZA_TomTom_2370
Safety_Cam_AU_TomTom_1993
Safety_Cam_UK_Premium_2355

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.

To install:
You don't need the PNA or META from a map.
What you do need is:
Download EasyUseTools (Keygen).
The two files .VER and .Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID
Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

(Installation instructions thanks to Rytenuff)

PS. There are many new patching tools now to choose from that are very easy to use that you can find on previous posts.

Enjoy & Please show your Appreciation!!!

Mo.

[msubedar]

GREECE META FINALLY AVAILABLE!!!!

For those of you who are still waiting for the 825 Greece Meta, it is here now!!!

; Greece_825_2159
69 0F 77 41 EC BB FB 3B 29 06 3A 34 96 70 8D E9 Greece-27.meta

Apparently the 825.2144 version has the same meta key so it is...

; Greece_825_2144
69 0F 77 41 EC BB FB 3B 29 06 3A 34 96 70 8D E9 Greece-27.meta

If someone tries this out and they find it does not work then please let us know, Thanks.

I don't actually know who's got these key meta's originally so I don't know who to Credit.

PS. The 825.2159 version of the Meta has already been updated in Mavericks meta.txt which is available in my Meta & Camera post above this one.

Enjoy, Mo ;)

[tendriver]

GREECE META FINALLY AVAILABLE!!!!


For those of you who are still waiting for the 825 Greece Meta, it is here now!!!

; Greece_825_2159
69 0F 77 41 EC BB FB 3B 29 06 3A 34 96 70 8D E9 Greece-27.meta

Apparently the 825.2144 version has the same meta key so it is...

; Greece_825_2144
69 0F 77 41 EC BB FB 3B 29 06 3A 34 96 70 8D E9 Greece-27.meta

If someone tries this out and they find it does not work then please let us know, Thanks.

I don't actually know who's got these key meta's originally so I don't know who to Credit.

PS. The 825.2159 version of the Meta has already been updated in Mavericks meta.txt which is available in my Meta & Camera post above this one.

Enjoy, Mo ;)

I created a .dct for both maps, installed & ran both of them. I can confirm that this one meta will create a .dct for them both.

; Greece_825_2159
69 0F 77 41 EC BB FB 3B 29 06 3A 34 96 70 8D E9 Greece-27.meta

[mec235]

I created a .dct for both maps, installed & ran both of them. I can confirm that this one meta will create a .dct for them both.



What is the difference ?

[tendriver]

What is the difference ?

What is the difference in what??

[tendriver]

After the successful launch of Western and Central Europe TRUCK v815.2112, TomTom has done it again with Western and Central Europe TRAIN v4.01.2009.
It was announced that WCE TRAIN v4.01.2009 map and a dedicated Navcore come in two flavors and that is WCE Train for new devices and WCE Train old devices as per the leaked images (http://www.ipmart-forum.com/showthread.php?p=2602570#) attached.

http://www.ipmart-forum.com/attachment.php?attachmentid=485294&d=1238561080http://www.ipmart-forum.com/attachment.php?attachmentid=485295&d=1238561080

TomTom says however that the present release of WCE TRAIN covers only Paris - Gare du Nord to London - St Pancras via Eurotunnel and EPT worked well during the beta testing. Other destinations will be added as soon as they are available thru TomTom Home for registered users only.

In the same press release TomTom delayed the finalization of TomTom Nascar maps as the beta release suffers from a major LoquendoTTS glitch. In fact whatever voice and whatever language you choose the message is the same… “While on the bank, turn right” so for these maps we probably have to wait until April 1, 2010

http://www.ipmart-forum.com/attachment.php?attachmentid=485296&d=1238561080

PS. Please check the regular threads for SpeedCams and Tools for ‘registering’ these maps to your devices.

[mec235]

What is the difference in what??

Sorry, the difference between 825.2144 e 825.2159 Greece map.

[tendriver]

Sorry, the difference between 825.2144 e 825.2159 Greece map.

Good question. It appears that 2144 & 2159 are actually the same. Same size, same files, etc.

[uberdude]

Good question. It appears that 2144 & 2159 are actually the same. Same size, same files, etc.
that would certainly explain why the same meta works for both maps then.

[Harry_C]

@tendriver,

In here too do not forget to give proper credits... just saying

[tendriver]

@tendriver,

In here too do not forget to give proper credits... just saying

Same excuse. However, to late to edit. just saying

[Jadugar302]

@ msubedar : (http://forum.gsmhosting.com/vbb/member.php?u=904772)

I am just about to install speed camera for my TomTom Go 500 but I am a little confused.
There are two type of camera in “radar” folder.

Safety_Cam_UK_Premium
Safety_Cam_UK_TomTom

Do I install both of them or can I use only one? Do I need a separate .dct file for each of them?

[msubedar]

@ msubedar : (http://forum.gsmhosting.com/vbb/member.php?u=904772)

I am just about to install speed camera for my TomTom Go 500 but I am a little confused.
There are two type of camera in “radar” folder.

Safety_Cam_UK_Premium
Safety_Cam_UK_TomTom

Do I install both of them or can I use only one? Do I need a separate .dct file for each of them?

Yes You can can install both of them if you wish & Yes you need to create two .dct's for both of them.

Mo.

[ADB100]

Yes You can can install both of them if you wish & Yes you need to create two .dct's for both of them.

Mo.

However...... Once TomTom is started one of them will get deleted. I am not sure about the logic but I think the file with the latest version information overwrites the other one.
I have just copied all six files (including the two .dct files) to my PDA running Navigator 7.915 and after starting Navigator the files 'Safety_Cam_UK_TomTom.ov2' & 'Safety_Cam_UK_TomTom.ov2.ver' get deleted. If you open the .ver files there is a version number and currently the 'Premium' is version 2376, whilst the 'TomTom' is version 2362, hence my assumption as to how the logic works.

Anyone know for sure?

Andy

[tstanton1]

I asked this a few questions back and received no response but what i can tell you is i put both on my TT Go 530 with 8.302 and UK & Ire 825.2157 and it didn't delete one of them after i used it. I would assume that the premium ones are more important as they have both a larger file size and are called 'Premium'.

I also have a request for help myself.

I recently used YDGpatch on the above TT with NC 8.302 and latest UK maps, when i connect to TTHome it only downloads quickfix GPS if i select internal memory (with old UK maps on it) and will only download map share updates for my 825.2157 maps on my SD card. Will that quick fix GPS apply to all maps i have on the device, irrespective of location or should i copy something across to the other map folders?

[joseph64]

Hi tstanton1,
I've found out that only the map you are actually using, i.e. have selected is the one that will be updated.
I have a whole collection of maps on my 910 and in order to actualize all, I have to update several times after selecting the/a other map.
It means that it will not in one go, update all the maps on your SD or HDD.
Cheers, Joseph

[uberdude]

correct you have to select each map individually via the unit then update with tomtom home,

[msubedar]

I asked this a few questions back and received no response but what i can tell you is i put both on my TT Go 530 with 8.302 and UK & Ire 825.2157 and it didn't delete one of them after i used it. I would assume that the premium ones are more important as they have both a larger file size and are called 'Premium'.

I also have a request for help myself.

I recently used YDGpatch on the above TT with NC 8.302 and latest UK maps, when i connect to TTHome it only downloads quickfix GPS if i select internal memory (with old UK maps on it) and will only download map share updates for my 825.2157 maps on my SD card. Will that quick fix GPS apply to all maps i have on the device, irrespective of location or should i copy something across to the other map folders?

For your Question about QuickGPS fix, whenever you download this update, it applies to all your maps, basically it just tells your SatNav where the satellites are etc so you don't need one for each map and plus once you download it once, you can't download it again on the same device until the new version is out.

correct you have to select each map individually via the unit then update with tomtom home,

Just to clarify when you said "...you have to select each map individually via the unit..." You don't have to dis-connect and re-connect to change the maps and then update them, you can change your current map through TomTom Home via "Operate My Device" so you can update that maps MapShare Updates.

Mo :)

[uberdude]

Just to clarify when you said "...you have to select each map individually via the unit..." You don't have to dis-connect and re-connect to change the maps and then update them, you can change your current map through TomTom Home via "Operate My Device" so you can update that maps MapShare Updates.

Mo :)

i stand corrected.
thanks

[msubedar]

NEW SPEED CAMERA'S & META.TXT FILE - 03-04-09

http://www.2shared.com/file/5244198/9021d950/Cameras__Meta_03-04-09.html

Courtesy of The Maverick

Just a quick tip: the .ver files are not needed to enable the use of the speed cams Thanks to Tendriver.

Safety_Cam_AT_TomTom_2377
Safety_Cam_BE_TomTom_2378
Safety_Cam_DE_TomTom_2379
Safety_Cam_ES_TomTom_2380
Safety_Cam_FI_TomTom_2381
Safety_Cam_FR_TomTom_2382
Safety_Cam_UK_TomTom_2383
Safety_Cam_IT_TomTom_2384
Safety_Cam_NL_TomTom_2385
Safety_Cam_NO_TomTom_2386
Safety_Cam_PT_TomTom_2387
Safety_Cam_SE_TomTom_2388
Safety_Cam_PL_TomTom_2389
Safety_Cam_CZ_TomTom_2390
Safety_Cam_ZA_TomTom_2391
Safety_Cam_AU_TomTom_1993
Safety_Cam_UK_Premium_2376

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.

To install:
You don't need the PNA or META from a map.
What you do need is:
Download EasyUseTools (Keygen).
The two files .VER and .Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID
Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

(Installation instructions thanks to Rytenuff)

PS. There are many new patching tools now to choose from that are very easy to use that you can find on previous posts.

Enjoy & Please show your Appreciation!!!

Mo.

[tstanton1]

Ah that makes sense then, as it downloads the quickfix whatever map is selected, but not again, after changing which map is in use. Thanks for the clarification.

[tstanton1]

Sorry, waited too late to edit.

I wanted the opinion of the collective here. Is it better to use Tom tom speed camera updates so kindly provided above or are the scdb ones a page or two back more useful. Does one work better with the TT navcores better than the others?

One final thing. I noticed that you can connect your TT to your phone to use it to download certain updates and better traffic information. Since i don't have a phone with an unlimited GPRS tariff, this would cost me a lot of money. However, i DO have a little netbook with unlimited mobile broadband and a bluetooth connection. Do you think it would be possible to connect the TT to it and download updates + traffic information through it instead? and do i have to pay TT for the traffic information and if so, is there a way around this.

Thanks (I have a TT Go x30 with NC 8.302 and UK 825.2157)

[algram]

Sorry, waited too late to edit.

I wanted the opinion of the collective here. Is it better to use Tom tom speed camera updates so kindly provided above or are the scdb ones a page or two back more useful. Does one work better with the TT navcores better than the others?

One final thing. I noticed that you can connect your TT to your phone to use it to download certain updates and better traffic information. Since i don't have a phone with an unlimited GPRS tariff, this would cost me a lot of money. However, i DO have a little netbook with unlimited mobile broadband and a bluetooth connection. Do you think it would be possible to connect the TT to it and download updates + traffic information through it instead? and do i have to pay TT for the traffic information and if so, is there a way around this.

Thanks (I have a TT Go x30 with NC 8.302 and UK 825.2157)


I think it should be possible to connect the GO to the notebook via Bluetooth. you may ash tomtom support. if they gave the answer, please post it here:)

[cookieboy1987]

Cool thank you so much!!

[tricia clay]

I think it should be possible to connect the GO to the notebook via Bluetooth. you may ash tomtom support. if they gave the answer, please post it here:)



surely if you`re that close to yr notebook anyway you might as well use usb lead,that way it will charge as well !!!!! lol

[ukd4v1d]

What is the latest navcore and GB map usable with a TomTom GO 920 please

[tendriver]

What is the latest navcore and GB map usable with a TomTom GO 920 please

Navcore 8.410 Map UK & ROI 825.2157

[ukd4v1d]

Navcore 8.410 Map UK & ROI 825.2157

Thankyou :) Much appreciated for the quick reply

[ukd4v1d]

To be a pest can i ask which version is going to work on my 920 as in reading through the hundreds of posts, they seem to all be for the Go ONE's

Would it be possible to have a link to the correct patched navcore and UK map :)

[msubedar]

To be a pest can i ask which version is going to work on my 920 as in reading through the hundreds of posts, they seem to all be for the Go ONE's

Would it be possible to have a link to the correct patched navcore and UK map :)

Navcore Version 8.310 (I have found this to be quite good on my 520)

http://rapidshare.com/files/187872932/navcore_SE_8.310.9760_SE_Variant.rar


Navcore Version 8.410

http://rapidshare.com/files/206587229/SE_Navcore.8.410.1218.rar


UK Map Version 825.2157 (Full Features)

http://forum.gsmhosting.com/vbb/showpost.php?p=4199943&postcount=2377


Enjoy and Please Show your Appreciation!!!

Mo :)

[tstanton1]

surely if you`re that close to yr notebook anyway you might as well use usb lead,that way it will charge as well !!!!! lol

I see your point, and for updating mapshare type stuff, that would definitely be best, but i was thinking more for things like traffic, which i think the TT downloads on the go in real-time and i'm not sure that can be done over USB. If it can i would love to know how.

Will go and ask TT if possible and post result here.

[ukd4v1d]

Navcore Version 8.310 (I have found this to be quite good on my 520)

http://rapidshare.com/files/187872932/navcore_SE_8.310.9760_SE_Variant.rar


Navcore Version 8.410

http://rapidshare.com/files/206587229/SE_Navcore.8.410.1218.rar


UK Map Version 825.2157 (Full Features)

http://forum.gsmhosting.com/vbb/showpost.php?p=4199943&postcount=2377


Enjoy and Please Show your Appreciation!!!

Mo :)

Thats the map i got last night, and i've also got that navcore the 8.4 version but i've been reading the 8310 is more stable but the link is now dead :(

Do you know of another source?

[ukd4v1d]

Navcore Version 8.310 (I have found this to be quite good on my 520)

http://rapidshare.com/files/187872932/navcore_SE_8.310.9760_SE_Variant.rar


Thats the map i got last night, and i've also got that navcore the 8.4 version but i've been reading the 8310 is more stable but the link is now dead :(

Do you know of another source?

[tendriver]

Thats the map i got last night, and i've also got that navcore the 8.4 version but i've been reading the 8310 is more stable but the link is now dead :(

Do you know of another source?

8.410 is quite stable on my 720.

[ukd4v1d]

8.410 is quite stable on my 720.

What changes are in the navcore to justify the upgrade? are their any worthwhile features.

I've now managed to change the navcore to V8310 with the latest UK Map :) thanks to all of the above info, but i cannot find the post to give thanks to the auto patcher program lol I stumbled across it earlier when i used it, but theirs 91 pages

[tendriver]

What changes are in the navcore to justify the upgrade? are their any worthwhile features.

I've now managed to change the navcore to V8310 with the latest UK Map :) thanks to all of the above info, but i cannot find the post to give thanks to the auto patcher program lol I stumbled across it earlier when i used it, but theirs 91 pages

If you are happy with 8310, then leave it be. There are only cosmetic changes in 8410.

[sophie999]

Thats the map i got last night, and i've also got that navcore the 8.4 version but i've been reading the 8310 is more stable but the link is now dead :(

Do you know of another source?


I use 8.4 with my 920 GO amd latest NA maps. Very stable. No problems. Works like a charm. Hope this helps.

[Rob822]

Hi tendriver, I have tomtom Go 730 , Where do I can find latest map for north America and Canada.

[msubedar]

Hi tendriver, I have tomtom Go 730 , Where do I can find latest map for north America and Canada.

NA Map is here (825.2157): http://forum.gsmhosting.com/vbb/showpost.php?p=4204287&postcount=2453

Separate links can be found here if you don't use DLC's: http://forum.gsmhosting.com/vbb/showpost.php?p=4204105&postcount=2447

USA & Canada Map is here (825.2159):
http://forum.gsmhosting.com/vbb/showpost.php?p=4203429&postcount=2437

Enjoy & Please show your Appreciation,

Mo.

[Rob822]

thanks for quick reply, msubedar

[tendriver]

Separate links can be found here if you don't use DLC's: http://forum.gsmhosting.com/vbb/showpost.php?p=4204105&postcount=2447

Mo.

Be advised, these links are no longer good.

[orange_man]

sorry to have to ask but im totally lost! I have just got a tomtom ONE 310 (N14644) with an old map on it (uk v715.1689) which tomtom home is telling me is over 12 months old. I have tomtom 7 on my HTC pda and kinda know what im doing with that however i have read through the 30 latest pages of this thread and im totally confused.

All im looking for is the latest uk map and some help with what to do with it. Please go easy on me there is just far too much information on here.

Will it still work with tomtom home once i have a cracked map on it? I was reading something about hacked navcors does that mean i can use tomtom home to update the maps without having to pay?

HELP IM CONFUSED!

(thanks in advance)

[tendriver]

sorry to have to ask but im totally lost! I have just got a tomtom ONE 310 (N14644) with an old map on it (uk v715.1689) which tomtom home is telling me is over 12 months old. I have tomtom 7 on my HTC pda and kinda know what im doing with that however i have read through the 30 latest pages of this thread and im totally confused.

All im looking for is the latest uk map and some help with what to do with it. Please go easy on me there is just far too much information on here.

Will it still work with tomtom home once i have a cracked map on it? I was reading something about hacked navcors does that mean i can use tomtom home to update the maps without having to pay?

HELP IM CONFUSED!

(thanks in advance)

What Navcore is on the One?

[orange_man]

i take it thats the app right? its 8.010

(thanks)

[tendriver]

i take it thats the app right? its 8.010

(thanks)

Correct. Navcore = NC = App. If you want to keep your current NC, then UK & ROI 825.2159. If you want a more detailed map, then upddate your NC & map UK & ROI 825.2157.

[Rob822]

I have TT Go 730 Navcor 8.302, I tried north America map 825.2157 , but when i power it on the gps say not support map, please help me for this

sorry for my English.

[Rob822]

where do can find NC 8.302 with a pre-patched ttsystem file

[tendriver]

I have TT Go 730 Navcor 8.302, I tried north America map 825.2157 , but when i power it on the gps say not support map, please help me for this

sorry for my English.

Download/unzip this patcher & run all 3 options:

1 Map V8 Keygen
2 TT Home Patch
3 ttsystem Navcore 8 Patch

http://www.2shared.com/file/5275026/6ab35a1e/Converter_2009_V20B.html

[orange_man]

Correct. Navcore = NC = App. If you want to keep your current NC, then UK & ROI 825.2159. If you want a more detailed map, then upddate your NC & map UK & ROI 825.2157.

if I update the navcore can it be it back to the original by restoring from a backup?

How do i update the navcore?

[tendriver]

if I update the navcore can it be it back to the original by restoring from a backup?

How do i update the navcore?

Yes, you can restore. If you don't like 2159, we'll go to plan B.

[msubedar]

NEW SPEED CAMERA'S & META.TXT FILE - 07-04-09

http://www.2shared.com/file/5276530/8eb5a36f/Cameras__Meta_07-04-09.html

Courtesy of The Maverick

Just a quick tip: the .ver files are not needed to enable the use of the speed cams Thanks to Tendriver.

(Australia Camera's Have Been Updated!!!)

Safety_Cam_AT_TomTom_2398
Safety_Cam_BE_TomTom_2399
Safety_Cam_DE_TomTom_2400
Safety_Cam_ES_TomTom_2401
Safety_Cam_FI_TomTom_2402
Safety_Cam_FR_TomTom_2403
Safety_Cam_UK_TomTom_2404
Safety_Cam_IT_TomTom_2405
Safety_Cam_NL_TomTom_2406
Safety_Cam_NO_TomTom_2407
Safety_Cam_PT_TomTom_2408
Safety_Cam_SE_TomTom_2409
Safety_Cam_PL_TomTom_2410
Safety_Cam_CZ_TomTom_2411
Safety_Cam_ZA_TomTom_2412
Safety_Cam_AU_TomTom_2392
Safety_Cam_UK_Premium_2417

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.

To install:
You don't need the PNA or META from a map.
What you do need is:
Download EasyUseTools (Keygen).
The two files .VER and .Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID
Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

(Installation instructions thanks to Rytenuff)

PS. There are many new patching tools now to choose from that are very easy to use that you can find on previous posts.

Enjoy & Please show your Appreciation!!!

Mo.

[tendriver]

New speed cams from www.scdb.info (http://www.anonym.to/?http://www.scdb.info)
The best speedcam Database for Europe!

Countries: Andorra, Austria, Belgium, Bosnia Herzegovina, Croatia, Cyprus, Czech Republic, Denmark, Finland, France, France DOM-ROM, Germany, Great Britain, Greece, Hungary, Iceland, Ireland,Israel, Italy, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Ukraine

Included is a German & English version.

http://www.2shared.com/file/5276770/e95db205/SCDB090406.html

Courtesy of nils16

JUST ENJOY!!! NO SHOW OF APPRECIATION NECESSARY!!!

[tendriver]

pocketGPS speedcameras for UK

Files updated as of April 2009

Zoned, Consolidated and single file versions for the UK.

http://www.2shared.com/file/5276848/c7f72ec9/UK-PGPS_2009-04.html

Courtesty of scoiattolo49

JUST ENJOY!!! NO SHOW OF APPRECIATION NECESSARY!!