TomTom v8 Firmware and Maps

[dsa8310]

Note that new NCs come with new skins, that is files named data_*.chk .

To make sure that the new skin files take precedence over the rather outdated ones provided for convenience in the generated dsa_navcore.nnnn.zip package, do use dsa.exe with the Install box checked off and device connected to PC so that the on device installation is handled by dsa.exe.

If installing by hand dsa_navcore.nnnn.zip, do NOT overwrite the new data_*.chk skin files previously extracted from the new TT CAB on device.

The simplest approach, let dsa.exe handle the on device installation.

[dsa8310]

The extra menu items that come with my patches and get into menu page 4, will appear in a random order that can be reordered as follows:

1) Remove all *.cap files (files with extension .cap) from folder SDKRegistry.

2) Copy the *.cap files back in folder SDKRegistry, one by one, in the desired order. This will be also the order the extra menu items will appear in menu page 4 (and subsequent ones).

[ebang]

I am going to give them both a try now...will let you know what happens.


TTS still not working or me on my ONE...tried all 3 navcores.

[dsa8310]

TTS still not working or me on my ONE...tried all 3 navcores.

That's too bad...
Not even the Chinese computer voices? :)

[ebang]

That's too bad...
Not even the Chinese computer voices? :)

no..they don't work either.

[tendriver]

TTS still not working or me on my ONE...tried all 3 navcores.

Computer voices are never gonna work, if that is what you are still trying.

[Eramaavaris]

Note that new NCs come with new skins, that is files named data_*.chk .

To make sure that the new skin files take precedence over the rather outdated ones provided for convenience in the generated dsa_navcore.nnnn.zip package, do use dsa.exe with the Install box checked off and device connected to PC so that the on device installation is handled by dsa.exe.

If installing by hand dsa_navcore.nnnn.zip, do NOT overwrite the new data_*.chk skin files previously extracted from the new TT CAB on device.

The simplest approach, let dsa.exe handle the on device installation.

I installed by hand, didn't overwrite data_*.chk files (this was the key to my problem) and now everything seems to be just fine and in order. I did some test and had no problems whatsoever. Thanks again dsa!

[tendriver]

Anybody wanna post pix of "new skins". I'm not seeing anything new in 8.417 in any emu..

[Mark.M]

Either card will work with NO PROBLEM!!


Just to clarify to a thick person :rolleyes: I could if needed, have latest NC & Map on the device and also Truck NC & 2112 Truck Map on a Card to install when needed in Truck ??

[ian2125]

Computer voices are never gonna work, if that is what you are still trying.

Hi Tendriver

Myself and others have been trying to get the jukebox and the computer voices working for some time now. Can I ask on what you base the statement that it will 'never' work. Up to know I have been assuming that there may be a firmware difference in the devices that prevent the software drivers from working on all devices. Please let us know if you have further information.

Thanks

Ian

[tendriver]

Just to clarify to a thick person :rolleyes: I could if needed, have latest NC & Map on the device and also Truck NC & 2112 Truck Map on a Card to install when needed in Truck ??

That is correct. When you install the card, it has priority and the device will boot from the card. Take the card out, and you are back to the internal boot.

[tendriver]

Hi Tendriver

Myself and others have been trying to get the jukebox and the computer voices working for some time now. Can I ask on what you base the statement that it will 'never' work. Up to know I have been assuming that there may be a firmware difference in the devices that prevent the software drivers from working on all devices. Please let us know if you have further information.

Thanks

Ian

Computer voices will not work on any device with 32mb of RAM Memory. They need a minimum of 64MB.

[ian2125]

Computer voices will not work on any device with 32mb of RAM Memory. They need a minimum of 64MB.

Thanks

Presumably the same limitation also applies to the mp3 decoder.

Ian

[dsa8310]

Thanks

Presumably the same limitation also applies to the mp3 decoder.

Ian

Please read your PMs.

[johnnyboy147]

http://rapidshare.com/files/226787871/zip_codes_NL_GB_901.rar
what is the pass word thanks:)

[tendriver]

what is the pass word thanks:)

Use this one:

http://rapidshare.com/files/229123623/zip.rar/

No password needed.

[johnnyboy147]

Use this one:

http://rapidshare.com/files/229123623/zip.rar/

No password needed.

thanks for this:D with no password

[Mark.M]

That is correct. When you install the card, it has priority and the device will boot from the card. Take the card out, and you are back to the internal boot.

Works a treat, Many Thanks :D

[sheephorse]

hi guys


i cant seem to download this anywhere can anyone help? TomTom KeyGen v2.1d Courtesy of BenBBS

many thanks :)

[Eramaavaris]

hi guys


i cant seem to download this anywhere can anyone help? TomTom KeyGen v2.1d Courtesy of BenBBS

many thanks :)

The newest one

http://www.ipmart-forum.com/attachment.php?attachmentid=511113&d=1246892330

[sheephorse]

Hi Guys

i have a tomtom one which has the following- App 7.903 OS:2344 GPS v1.21 Boot 5.0500 Map:great Britain v605.0

i want to format the whole card and follow the guide by Albert's easy activator but im not sure what Navcore to download, i downloaded the UK.ROI.830.2305 map and the latest tomtom keygen also do i have to download any other programs?

i would really appreciate anyone's help

Many Thanks

Barry :cool:

[dsa8310]

@Ian&ebang:

You need to empty the PM folders to make room to new messages, I think.

Here's the link to the last version to test:

http://www.2shared.com/file/6761024/579a0efb/test8417-swap-binn-boot.html

in case you did not get it.

[dsa8310]

@Ian&ebang:

You need to empty the PM folders to make room to new messages, I think.

Here's the link to the last version to test:

http://www.2shared.com/file/6761024/579a0efb/test8417-swap-binn-boot.html

in case you did not get it.

I tested this version on my go910 and:

- available memory has a fixed value, regardless of the real available amount; total memory is displayed as 64 MB.
- the unit works, no reboots.

Now I expect the swapping to take place on the 32 MB devices as implemented.

And, the ttsserver and mp3d processes to be spawned by ttn and do their job - TTS and Jukebox, respectively...

?!

[dsa8310]

@Ian&ebang:

You need to empty the PM folders to make room to new messages, I think.

Here's the link to the last version to test:

http://www.2shared.com/file/6761024/579a0efb/test8417-swap-binn-boot.html

in case you did not get it.

I tested this version on my go910 and:

- available memory has a fixed value, regardless of the real available amount; total memory is displayed as 64 MB.
- the unit works, no reboots.

Now I expect the swapping to take place on the 32 MB devices as implemented.

And, the ttsserver and mp3d processes to be spawned by ttn and do their job - TTS and Jukebox, respectively...

?!

Anyone with a 32MB device can test regular dsa.exe v8.417 and then replace ttsystem and PNDNavigator with those in the package above.

It might discover that TTS and Jukebox work... or not?

Be aware that 64MB of free disk space are required on device's main storage and that there will be a long delay until the swapping file is allocated - but it will happen only once, further restarts will be swift as usually.

[ian2125]

Anyone with a 32MB device can test regular dsa.exe v8.417 and then replace ttsystem and PNDNavigator with those in the package above.

It might discover that TTS and Jukebox work... or not?

Be aware that 64MB of free disk space are required on device's main storage and that there will be a long delay until the swapping file is allocated - but it will happen only once, further restarts will be swift as usually.

Ok

dsa.exe v8.417 seems to work fine on my XL (no SD slot or bluetooth), I'm using x40 emulation.

Unfortunatly the above package with swapfile does not seem to cure the TTS/mp3 problem. I do notice that having installed it when the TT reboots it appears to hang up (left for 15 minutes just with the TT logo on the screen). In the end I rebooted and it sucessfully booted into the navigation screen. All appeared to be ok but alas still no mp3 or TTS :confused:

Once again dsa thanks for all your efforts.

Ian

[sheephorse]

can anyone help?

thanks

[sheephorse]

can anyone help please?

thank you :)

[tendriver]

It appears that nobody has actually seen any "new skins" in 8.414 or 417, since no pix have been posted

[ebang]

It appears that nobody has actually seen any "new skins" in 8.414 or 417, since no pix have been posted


I haven't seen any either...

[delix1]

hi.i've got problem wiith my go910. i try to activate the map on my tt . my navcore 7.903 and i want to instal map v 815. i've used Easytool to activate.so on my tt home i can see the contest of my device and map of western and central europe is there but when i turn on my tt go910 and i want to swap the map is no on the list.i don't know what i'm doing wrong.if someone could help i'll be very happy.

[Mannyajk]

help!!!!!!!!!!!!!!

I HAVE JUST RUINED MY STONE AGE TOM TOM 500, I TRIED TO UPDATE MAPS AND ENDED UP DELETING THE CURRENT MAPS NOW THERE ARE NO MAPS TO CHOOSE FROM.......I AINT TECHINALLY MINDED PLEASE CAN SOME ONE HELP ME TO GET BACK MAPS OR TO UPDATE MAPS IN SIMPLE TERMS THANK YOU BEFORE HAND

[attentive-guy]

Hi Guys

I am using Tomtom 6 on my PDA Windows Mobile 5.
it would be a great help if you could put up a link for (Germany, Austria and Switzerland) map version 6.75 build 1409.

Thanks in advance.

[attentive-guy]

Hello Guys

I am using Tomtom 6 on my PDA Windows Mobile 5.
it would be a great help if you could put up a link for (Germany, Austria and Switzerland) map version 6.75 build 1409.

Cheers in advance

[cacolac2884]

Hi all,

I have on TT rider first edition with TT6.
I would like to update it, but with TThome, the last official version (7.901), no update.
So, I would like to upgrade with TT8, but i don't know wich version of navcore and bootloader.
The probleme is that rider device are special, there are no internal speaker, only bluetooth connection for bluetooth headset (only use on a bike).
Thanks in advance for yours answers.

[dsa8310]

Link to memorybooster.8417.zip:

http://www.2shared.com/file/6775648/bef92703/memorybooster8417.html

If you ever wanted to have more free memory on your TT, the above package is the solution. Provided that you run NC v8.417, preferably patched with dsa.exe, but not necessarily, since PNDNavigator is separated from ttsystem ab initio.

Simply unzip it to the main storage and disconnect from PC. You will have to wait a considerable amount of time until the swapfile is created on device. Be patient, it happens only once. Make sure you have 64MB of free contiguous disk/SD space on device in advance.

Once up and running, find the new menu item named "Memory Boost" (icon is an elephant). And click it! Then move, but not hastily, do not touch the screen immediately, to the status screen (the one with device id, app. no, RAM, gps, boot, map, language, etc) and watch how the free memory gets its shot. Click on screen back and forth to trigger the display update.

I made it specially for memory strapped devices, like certain ONE/XL with only 32MB of RAM.
It might help them have TTS and Jukebox running.

Everybody else can enjoy an innocuous shot of memory. Just don't become addicted!! :)
(yes, it can be repeated every 20 seconds or so)

If its main purpose - to increase memory at a level at which TTS and Jukebox would run - is achieved, then I might make it totally transparent to user (no extra menu item).

Let's wait and see your feedback :)

(I have tested it on my go910, where I can reach and maintain levels of 36MB free RAM. The setup is also swifter in my case because I have a CF card in place of the HDD, correctly configured with the CF dsa.exe check box)

[tendriver]

It appears that nobody has actually seen any "new skins" in 8.414 or 417, since no pix have been posted

I haven't seen any either...


Thanx for the conformation. I didn't think there were any.

[dsa8310]

Link to memorybooster.8417.zip:

http://www.2shared.com/file/6775648/bef92703/memorybooster8417.html

If you ever wanted to have more free memory on your TT, the above package is the solution. Provided that you run NC v8.417, preferably patched with dsa.exe, but not necessarily, since PNDNavigator is separated from ttsystem ab initio.

Simply unzip it to the main storage and disconnect from PC. You will have to wait a considerable amount of time until the swapfile is created on device. Be patient, it happens only once. Make sure you have 64MB of free contiguous disk/SD space on device in advance.

Once up and running, find the new menu item named "Memory Boost" (icon is an elephant). And click it! Then move, but not hastily, do not touch the screen immediately, to the status screen (the one with device id, app. no, RAM, gps, boot, map, language, etc) and watch how the free memory gets its shot. Click on screen back and forth to trigger the display update.

I made it specially for memory strapped devices, like certain ONE/XL with only 32MB of RAM.
It might help them have TTS and Jukebox running.

Everybody else can enjoy an innocuous shot of memory. Just don't become addicted!! :)
(yes, it can be repeated every 20 seconds or so)

If its main purpose - to increase memory at a level at which TTS and Jukebox would run - is achieved, then I might make it totally transparent to user (no extra menu item).

Let's wait and see your feedback :)

(I have tested it on my go910, where I can reach and maintain levels of 36MB free RAM. The setup is also swifter in my case because I have a CF card in place of the HDD, correctly configured with the CF dsa.exe check box)

Linux users can speed-up the process of creating the swap file by making it on their PC:

# dd if=/dev/zero of=swap bs=1M count=64
# mkswap swap
# dd if=swap of=/media/TOMTOM/swap bs=1M

where /media/TOMTOM is TT's mount point and indeed my ttsystem expects the swapfile to be named "swap" and to be found in the root of the main storage.

[dsa8310]

Link to memorybooster.8417.zip:

http://www.2shared.com/file/6775648/bef92703/memorybooster8417.html

If you ever wanted to have more free memory on your TT, the above package is the solution. Provided that you run NC v8.417, preferably patched with dsa.exe, but not necessarily, since PNDNavigator is separated from ttsystem ab initio.

Simply unzip it to the main storage and disconnect from PC. You will have to wait a considerable amount of time until the swapfile is created on device. Be patient, it happens only once. Make sure you have 64MB of free contiguous disk/SD space on device in advance.

Once up and running, find the new menu item named "Memory Boost" (icon is an elephant). And click it! Then move, but not hastily, do not touch the screen immediately, to the status screen (the one with device id, app. no, RAM, gps, boot, map, language, etc) and watch how the free memory gets its shot. Click on screen back and forth to trigger the display update.

I made it specially for memory strapped devices, like certain ONE/XL with only 32MB of RAM.
It might help them have TTS and Jukebox running.

Everybody else can enjoy an innocuous shot of memory. Just don't become addicted!! :)
(yes, it can be repeated every 20 seconds or so)

If its main purpose - to increase memory at a level at which TTS and Jukebox would run - is achieved, then I might make it totally transparent to user (no extra menu item).

Let's wait and see your feedback :)

(I have tested it on my go910, where I can reach and maintain levels of 36MB free RAM. The setup is also swifter in my case because I have a CF card in place of the HDD, correctly configured with the CF dsa.exe check box)

Linux users can speed-up the process of creating the swap file by making it on their PC:

# dd if=/dev/zero of=swap bs=1M count=64
# mkswap swap
# dd if=swap of=/media/TOMTOM/swap bs=1M

where /media/TOMTOM is TT's mount point and indeed my ttsystem expects the swapfile to be named "swap" and to be found in the root of the main storage.

The fact that the RSS size of ttn (core NC) can be reduced so dramatically, from 33MB to a mere 12MB (and lower) speaks volumes of the crap ttn is built of. That also explains why ttn actually works on half memory devices - and behaves so badly there memory wise. Could be malice or mere stupidity from TT's part...

[ian2125]

Link to memorybooster.8417.zip:

http://www.2shared.com/file/6775648/bef92703/memorybooster8417.html

If you ever wanted to have more free memory on your TT, the above package is the solution. Provided that you run NC v8.417, preferably patched with dsa.exe, but not necessarily, since PNDNavigator is separated from ttsystem ab initio.

Simply unzip it to the main storage and disconnect from PC. You will have to wait a considerable amount of time until the swapfile is created on device. Be patient, it happens only once. Make sure you have 64MB of free contiguous disk/SD space on device in advance.

Once up and running, find the new menu item named "Memory Boost" (icon is an elephant). And click it! Then move, but not hastily, do not touch the screen immediately, to the status screen (the one with device id, app. no, RAM, gps, boot, map, language, etc) and watch how the free memory gets its shot. Click on screen back and forth to trigger the display update.

I made it specially for memory strapped devices, like certain ONE/XL with only 32MB of RAM.
It might help them have TTS and Jukebox running.

Everybody else can enjoy an innocuous shot of memory. Just don't become addicted!! :)
(yes, it can be repeated every 20 seconds or so)

If its main purpose - to increase memory at a level at which TTS and Jukebox would run - is achieved, then I might make it totally transparent to user (no extra menu item).

Let's wait and see your feedback :)

(I have tested it on my go910, where I can reach and maintain levels of 36MB free RAM. The setup is also swifter in my case because I have a CF card in place of the HDD, correctly configured with the CF dsa.exe check box)

I wonder if someone else with a ONE/XL could try this. I have tried it but it is causing my XL to reboot. I may be doing something wrong so it would be good to get some feedback from someone else.

Thanks

Ian

[dsa8310]

I wonder if someone else with a ONE/XL could try this. I have tried it but it is causing my XL to reboot. I may be doing something wrong so it would be good to get some feedback from someone else.

Thanks

Ian

After clicking the "Memory Boost" menu item, do not touch the screen for a while - say until the time or the (lack of) gps message gets updated.
The reboot issue seems to be caused by a very slow storage access time.
Once getting past the critical point, it should work smoothly...

Also, the mechanism can be fine tuned for 32MB devices, you could replace number 32 in file TTmemory\TTmemory-wrapper to read 20 instead (do it gently if under Windows, do not press the Enter key).

[dsa8310]

After clicking the "Memory Boost" menu item, do not touch the screen for a while - say until the time or the (lack of) gps message gets updated.
The reboot issue seems to be caused by a very slow storage access time.
Once getting past the critical point, it should work smoothly...

Also, the mechanism can be fine tuned for 32MB devices, you could replace number 32 in file TTmemory\TTmemory-wrapper to read 20 instead (do it gently if under Windows, do not press the Enter key).

Here is the mild version of memorybooster.8417.zip:

http://www.2shared.com/file/6781316/2fcf3c2c/memorybooster8417.html

For 32MB devices.

[dsa8310]

Here is the mild version of memorybooster.8417.zip:

http://www.2shared.com/file/6781316/2fcf3c2c/memorybooster8417.html

For 32MB devices.

Here is an even milder version:

http://www.2shared.com/file/6781447/20f0ee7a/memorybooster8417.html

Try it out.

[delix1]

hi.i've got problem wiith my go910. i try to activate the map on my tt . my navcore 7.903 and i want to instal map v 815. i've used Easytool to activate.so on my tt home i can see the contest of my device and map of western and central europe is there but when i turn on my tt go910 and i want to swap the map is no on the list.i don't know what i'm doing wrong.if someone could help i'll be very happy

[ian2125]

Here is an even milder version:

http://www.2shared.com/file/6781447/20f0ee7a/memorybooster8417.html

Try it out.

Hi dsa

Having problems with these links could you check please.

I'll try to modify ttmemory parameter

Thanks

Ian

[dsa8310]

Link to memorybooster.8417.zip - self tuning version:

http://www.2shared.com/file/6782268/94414235/memorybooster8417.html

This should be the "right" version, previous ones have been deleted.

It works like this:

1) Install the dsa.exe NC v8.417 on device (any v8.417 patched version will do). Then extract on main device storage the package above, it replaces ttsystem and it adds a new menu item. Disconnect the device from PC and let it start-up.

2) A swap file (named "swap", in the root of main storage) is created, of size 64M for 64MB devices and of size 32MB for 32MB devices. People that have already the big 64MB swap file could keep it.
Making the file takes considerable time, be patient, it happens only once.
To speed up the process, Linux users can make it on their PC with commands:
# dd if=/dev/zero of=/media/TOMTOM/swap bs=1M count=32 ##(or 64)
# mkswap /media/TOMTOM/swap
where /media/TOMTOM is TT's mount point.

2) A new menu item labeled "Memory Boost" - icon a white elephant, is created. Click it and wait a little (it depends on storage speed), say until time or (lack of) gps signal message gets updated. Then check the status screen (all infos are there, device id, memory, etc) and see the memory boost.
On my go910 I get 35MB free RAM.

The "Memory Boost" item can be executed repeatedly, no restrictions, just... addictions! :)

Hopefully 32MB devices will have the Jukebox and TTS enabled after the memory shot.
All others will simply get the memory boost.

[dsa8310]

Hi dsa

Having problems with these links could you check please.

I'll try to modify ttmemory parameter

Thanks

Ian

I know, sorry for that, please read post #5045 (http://forum.gsmhosting.com/vbb/showpost.php?p=4676068&postcount=5045), it replaces all previous memory boosters.

[ian2125]

Link to memorybooster.8417.zip - self tuning version:

http://www.2shared.com/file/6782268/94414235/memorybooster8417.html

This should be the "right" version, previous ones have been deleted.

It works like this:

1) Install the dsa.exe NC v8.417 on device (any v8.417 patched version will do). Then extract on main device storage the package above, it replaces ttsystem and it adds a new menu item. Disconnect the device from PC and let it start-up.

2) A swap file (named "swap", in the root of main storage) is created, of size 64M for 64MB devices and of size 32MB for 32MB devices. People that have already the big 64MB swap file could keep it.
Making the file takes considerable time, be patient, it happens only once.
To speed up the process, Linux users can make it on their PC with commands:
# dd if=/dev/zero of=/media/TOMTOM/swap bs=1M count=32 ##(or 64)
# mkswap /media/TOMTOM/swap
where /media/TOMTOM is TT's mount point.

2) A new menu item labeled "Memory Boost" - icon a white elephant, is created. Click it and wait a little (it depends on storage speed), say until time or (lack of) gps signal message gets updated. Then check the status screen (all infos are there, device id, memory, etc) and see the memory boost.
On my go910 I get 35MB free RAM.

The "Memory Boost" item can be executed repeatedly, no restrictions, just... addictions! :)

Hopefully 32MB devices will have the Jukebox and TTS enabled after the memory shot.
All others will simply get the memory boost.

Havn't tried this version yet, may not get change until later
However I did try modifying the value in ttmemory-wrapper to 20 and 16.
This does stop the reboot problem. When the memory booster is pressed the screen returns to navigation however I am not seeing an apreciable increace in free memory 5.7Mb to 6Mb, if that. Not surprisingly mp3d still does not operate.

Can I just confirm having installed v8.417 CAB and running dsa.exe will perform the patching there is nothing else I should have done ? Everything else seems to work fine.

I still need to try launching mp3d and ttsystem within ttconsole. I will let you know what I find.

Ian

[tendriver]

Courtesy of TTUser

Home dll + outsourced. is in Basicpack
SE_Navcore.8.414.1239.Basicpack.rar
(http://rapidshare.com/files/257727105/SE_Navcore.8.414.1239.Basicpack.rar)SE_ttsystem.84 14.1239.rar (http://www.anonym.to/?http://rapidshare.com/files/257730131/SE_ttsystem.8414.1239.rar)

[tendriver]

Height Version 11.

http://gps.dg4sfw.de/index.php/menuid=57

Courtesy of Joghurt.

[delix1]

hi.i've got problem wiith my go910. i try to activate the map on my tt . my navcore 7.903 and i want to instal map v 815. i've used Easytool to activate.so on my tt home i can see the contest of my device and map of western and central europe is there but when i turn on my tt go910 and i want to swap the map is no on the list.i don't know what i'm doing wrong.if someone could help i'll be very happy

[attentive-guy]

Hello Guys

I am using Tomtom 6 on my PDA Windows Mobile 5.
it would be a great help if you could put up a link for (Germany, Austria and Switzerland) map version 6.75 build 1409.

Cheers in advance

Hi All

would anyone give me a favor by providing me the links for Austria map v6.75 build 1409 for Tomtom 6 for PDA PPC.

Thanks in Advance,,

[cacolac2884]

Hi all,

I have on TT rider first edition with TT6.
I would like to update it, but with TThome, the last official version (7.901), no update.
So, I would like to upgrade with TT8, but i don't know wich version of navcore and bootloader.
The probleme is that rider device are special, there are no internal speaker, only bluetooth connection for bluetooth headset (only use on a bike).
Thanks in advance for yours answers.
Hello, no idea?
It is very urgent.
Thank you for your answers.

[ebang]

Link to memorybooster.8417.zip - self tuning version:

http://www.2shared.com/file/6782268/94414235/memorybooster8417.html

This should be the "right" version, previous ones have been deleted.

It works like this:

1) Install the dsa.exe NC v8.417 on device (any v8.417 patched version will do). Then extract on main device storage the package above, it replaces ttsystem and it adds a new menu item. Disconnect the device from PC and let it start-up.

2) A swap file (named "swap", in the root of main storage) is created, of size 64M for 64MB devices and of size 32MB for 32MB devices. People that have already the big 64MB swap file could keep it.
Making the file takes considerable time, be patient, it happens only once.
To speed up the process, Linux users can make it on their PC with commands:
# dd if=/dev/zero of=/media/TOMTOM/swap bs=1M count=32 ##(or 64)
# mkswap /media/TOMTOM/swap
where /media/TOMTOM is TT's mount point.

2) A new menu item labeled "Memory Boost" - icon a white elephant, is created. Click it and wait a little (it depends on storage speed), say until time or (lack of) gps signal message gets updated. Then check the status screen (all infos are there, device id, memory, etc) and see the memory boost.
On my go910 I get 35MB free RAM.

The "Memory Boost" item can be executed repeatedly, no restrictions, just... addictions! :)

Hopefully 32MB devices will have the Jukebox and TTS enabled after the memory shot.
All others will simply get the memory boost.


I have tried this and the memory boost works but TTS and MP3 still do not work

[dsa8310]

hi.i've got problem wiith my go910. i try to activate the map on my tt . my navcore 7.903 and i want to instal map v 815. i've used Easytool to activate.so on my tt home i can see the contest of my device and map of western and central europe is there but when i turn on my tt go910 and i want to swap the map is no on the list.i don't know what i'm doing wrong.if someone could help i'll be very happy

You should upgrade your navcore to v8.417. Then get a decent W&CE 8.30 map.

Search the thread for dsa-all.17July09.zip, use dsa-win.zip and dsa.exe to upgrade the NC. Find the TT original CAB 8.417 as source for dsa.exe.
Put/extract on device the LoquendoTTS.zip package, look for it.
Download the 830.2305 W&CE map, search for it.
Get the Easyusetools package to patch your map on device. Search for it and how to use it (Runmeforallautomatic and option 1).

Same goes for the TT Rider device - give it a try, I have zero experience with the rider though.

[dsa8310]

I have tried this and the memory boost works but TTS and MP3 still do not work

That's too bad.
What kind of a boost did you get?

[ebang]

it went from around 6mb to about 14mb

[dsa8310]

it went from around 6mb to about 14mb

That's not bad at all :)
(I went, on my 64MB device from 16 to 35)
So, any addiction yet? :)

Unfortunately I do not do reverse engineering so I do not know for now what to do about TTS and Jukebox... It's a white elephant after all. :)

[ebang]

That's not bad at all :)
(I went, on my 64MB device from 16 to 35)
So, any addiction yet? :)

Unfortunately I do not do reverse engineering so I do not know for now what to do about TTS and Jukebox... It's a white elephant after all. :)

no addiction yet....on another note about the TTS...when I access the computer voices using TT Home it says that "this item can not be used with the current version of the tom tom application on your device"...so I am thinking that it is not a memory issue but possaibly something else...what do you think?

[uberdude]

THESE CAMS ARE A COMBINATION OF MY OWN SUBSCRIPTIONS TO TOMTOM AND THOSE COMPILED BY THE MAVERICK, ALL CREDIT FOR THESE CAMS GO TO THE MAVERICK FOR THE TIRELESS WORK HE DOES WITHIN THE TOMTOM COMMUNITY AND FOR THE HARD WORK HE PUTS INTO COMPILING AND UPDATING THE META.TXT FILES

please note
ALWAYS make a backup of your tomtom before you tinker with it. either by using tomtom home or just by copying the entire contents of your memory card or device to your pc.

NEW SPEED CAMS 21.07.09
=====================

Latest Version

Safety_Cam_NZ_TomTom 1348
Safety_Cam_AT_TomTom 3125
Safety_Cam_BE_TomTom 3126
Safety_Cam_DE_TomTom 3127
Safety_Cam_ES_TomTom 3128
Safety_Cam_FI_TomTom 3129
Safety_Cam_FR_TomTom 3130
Safety_Cam_UK_TomTom 3131
Safety_Cam_IT_TomTom 3132
Safety_Cam_NL_TomTom 3133
Safety_Cam_NO_TomTom 3134
Safety_Cam_PT_TomTom 3135
Safety_Cam_SE_TomTom 3136
Safety_Cam_PL_TomTom 3137
Safety_Cam_CZ_TomTom 3138
Safety_Cam_ZA_TomTom 2871
Safety_Cam_AU_TomTom 3140
Safety_Cam_BR_TomTom 3141
Safety_Cam_US_Canada_TomTom 3142
Safety_Cam_NL_Premium 3099
Safety_Cam_FR_Premium 3100
Safety_Cam_DE_Premium 3101
Safety_Cam_UK_Premium 3102

http://imgkk.com/images/1wdhi24r.png


http://rapidshare.com/files/258420574/21.07.09.rar

===============================================

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.
now includes us and Canadian cams

to activate these cameras on your map copy and paste The two files .VER and .Ov2 for each camera into your map folder on your device or memory card and use alberts easy activator or benbbs's key gen to activate them

=========================================
benbbs
http://imgkk.com/images/1wdhi24r.png
KEYGEN
http://rapidshare.com/files/240359914/ISO-8859-1__TomTom_Keygen_v3.1C.zip
META

http://rapidshare.com/files/250319161/ISO-8859-1__meta.rar
=========================================
alberts easy installer
http://www.megaupload.com/?d=94JT300Z
=========================================

THE FOLLOWING IS A NOTE FROM MSUBEDAR AND THE CREDIT FOR IT IS RIGHTLY HIS.

ALSO NOTE
These Camera files I post up here are NOT POI's.... On most new Navcore's you cannot see them as a POI (However, on some older versions I have seen them visible as a POI), As these are original TomTom files, your tomtom NC will read them as originals after they have been patched to your device so it does not need to show them as a POI. Your TomTom will know what to do with them and automatically will add a warning beep etc which is something you can choose and change to which beep you want etc. BUT AGAIN, THESE FILES ARE NOT RECOGNIZED AS A POI. (For example if you also use SCDB Camera files or PocketGPS Camera's, you will notice that they are available as POI's so you have the normal settings available to you to change if you wish.)

Once the files have been patched to your device (.dct files created) then just put all the files in your map folder (.ver file not needed but no harm is done if you also put them in).

To check if they work: (Tip: I would just switch off any other camera files you may have in the POI section like PGPS or SCDB Camera's to avoid confusion while testing)

Create a route where you know you will be going past a Camera (To be sure, create the route so you are on the correct side of the road, in the same direction the Camera is facing) and in Route Summary, do a Demo of the Route (at 500% is fine) and if the camera shows up whilst its on the Demo and it beeps then you know everything is working.

HOPE THIS HELPS

[dsa8310]

no addiction yet....on another note about the TTS...when I access the computer voices using TT Home it says that "this item can not be used with the current version of the tom tom application on your device"...so I am thinking that it is not a memory issue but possaibly something else...what do you think?


You might be right!!

Do you have this http://www.2shared.com/file/4903441/fe7fb85c/LoquendoTTS.html on your device? It's a hacked one!! You need it!!

File LoquendoTTS/bin/libLoqTTS7.so is hacked!!

[tendriver]

Hi All

would anyone give me a favor by providing me the links for Austria map v6.75 build 1409 for Tomtom 6 for PDA PPC.

Thanks in Advance,,

Your best bet is to do a Google search.

[cacolac2884]

You should upgrade your navcore to v8.417. Then get a decent W&CE 8.30 map.

Search the thread for dsa-all.17July09.zip, use dsa-win.zip and dsa.exe to upgrade the NC. Find the TT original CAB 8.417 as source for dsa.exe.
Put/extract on device the LoquendoTTS.zip package, look for it.
Download the 830.2305 W&CE map, search for it.
Get the Easyusetools package to patch your map on device. Search for it and how to use it (Runmeforallautomatic and option 1).

Same goes for the TT Rider device - give it a try, I have zero experience with the rider though.

Thank you, i will try this!! :)

[cacolac2884]

You should upgrade your navcore to v8.417. Then get a decent W&CE 8.30 map.

Search the thread for dsa-all.17July09.zip, use dsa-win.zip and dsa.exe to upgrade the NC. Find the TT original CAB 8.417 as source for dsa.exe.
Put/extract on device the LoquendoTTS.zip package, look for it.
Download the 830.2305 W&CE map, search for it.
Get the Easyusetools package to patch your map on device. Search for it and how to use it (Runmeforallautomatic and option 1).

Same goes for the TT Rider device - give it a try, I have zero experience with the rider though.

Thank you, i will try it!! :)

[ebang]

I added this over the one I had and still the same thing....thanks though

[ebang]

I added this over the one I had and still the same thing....thanks though
just to add that I no longer get the mesage:.... this item can not be used with the current version of the tom tom application on your device"...

[ian2125]

just to add that I no longer get the mesage:.... this item can not be used with the current version of the tom tom application on your device"...

Hi Ebang

What about Jukebox, I now get an error mesage but on returning to navigation I no longer have to restart to get the navigation voice back.

I havn't tried Loquendo yet I'll give it a try

Ian

[dsa8310]

I added this over the one I had and still the same thing....thanks though

Tell me please, when clicking on the TTS area of the screen (lower left corner), nothing happens, is that true?
Same when selecting a song in the Jukebox?

I have just reproduced the error on my device by killing a single process, the so called "launchserver".
As soon as I restart it, all (TTS&Jukebox) work again.

This daemon process is started by TT first, before core ttn, (and before my memory booster). It has the whole memory at its disposition, so it's not a memory shortage issue. Let me see if I could trick it into believing that there are 64MB of RAM available... I think TT makes the opossite, they decide to terminate it based on the real total memory test.

[delix1]

hi.if i'm extracting navcore on dsa.exe after that program create navcore.zip what should i do.or could you tell me step by step how to proply instal new navcore to device.thank you

[ebang]

Tell me please, when clicking on the TTS area of the screen (lower left corner), nothing happens, is that true?
Same when selecting a song in the Jukebox?

I have just reproduced the error on my device by killing a single process, the so called "launchserver".
As soon as I restart it, all (TTS&Jukebox) work again.

This daemon process is started by TT first, before core ttn, (and before my memory booster). It has the whole memory at its disposition, so it's not a memory shortage issue. Let me see if I could trick it into believing that there are 64MB of RAM available... I think TT makes the opossite, they decide to terminate it based on the real total memory test.

This is what happens, If I select a computer voice it kills the sound on the device...when I click on the lower left corner still nothing..to get the voices working again I have to select a regular voice and reboot the device to get it working. I noticed something as well....the exact thing happens when I select certain POI warnings..it will kill the sound on the device and I have to reboot to get it back

[ebang]

Hi Ebang

What about Jukebox, I now get an error mesage but on returning to navigation I no longer have to restart to get the navigation voice back.

I havn't tried Loquendo yet I'll give it a try

Ian

I get the same thing with jukebox as the computer voices....it kills all sound until I reboot.

[dsa8310]

Link to memorybooster.8417.zip -- the One!?:

http://www.2shared.com/file/6789842/9c34cb7e/memorybooster8417.html

Ian, ebang, please try this one out!
I have moved the launchserver command AFTER swapping. It might work...

[ebang]

Link to memorybooster.8417.zip -- the One!?:

http://www.2shared.com/file/6789842/9c34cb7e/memorybooster8417.html

Ian, ebang, please try this one out!
I have moved the launchserver command AFTER swapping. It might work...

I gave it a try with jukebox and TTS still nothing..same results as before.

[dsa8310]

Link to memorybooster.8417.zip - back to square one:

http://www.2shared.com/file/6792046/7f2bf06e/memorybooster8417.html

I am reposting the memory booster, previous versions deleted, no progress yet, just for fun... to show how memory inefficient is ttn.

Anyway, I was on the wrong path with the launchserver process, it's TT's way of starting servers, among them ttsserver (TTS), mp3d (Jukebox player), btserver (Bluetooth).

[delix1]

hi.if i'm extracting navcore on dsa.exe after that program create navcore.zip what should i do.or could you tell me step by step how to proply instal new navcore to device.thank you

[dsa8310]

hi.if i'm extracting navcore on dsa.exe after that program create navcore.zip what should i do.or could you tell me step by step how to proply instal new navcore to device.thank you

Download TT CAB v8.417, connect device to PC, start dsa.exe from within folder dsa-win (unzip dsa-win.zip first), check off box labeled Install (device drive will be displayed below), click button Open from section TT CAB, select the TT CAB, click big Patch button, answer yes to install on device drive.
Do extract LoquendoTTS.zip on device before all (get it from a few posts above).

Disconnect device, let it start-up. Then reconnect it to PC.
Put the 830.2305 W&CE map folder on device. Run Runmeforallautomatic and select option 1 from within Easyusetools... folder (get the Easyusetools tool first, search it).

[ian2125]

Link to memorybooster.8417.zip - back to square one:

http://www.2shared.com/file/6792046/7f2bf06e/memorybooster8417.html

I am reposting the memory booster, previous versions deleted, no progress yet, just for fun... to show how memory inefficient is ttn.

Anyway, I was on the wrong path with the launchserver process, it's TT's way of starting servers, among them ttsserver (TTS), mp3d (Jukebox player), btserver (Bluetooth).

Thanks dsa for your efforts once again.

I'm packing up now and off to France for two weeks. Put these French maps to the test on the old XL, sadly without computer voices but never mind ! See whats new when I return:D

Oh one last comment. I noted ebang said the sound on his unit still stopped after trying to use mp3/TTS. Having installed 8.417 I note that the sound still operates but in particular after attempting mp3 playback I get a message 'An error occured during audio playback', something has changed !

Ian

[dsa8310]

Thanks dsa for your efforts once again.

I'm packing up now and off to France for two weeks. Put these French maps to the test on the old XL, sadly without computer voices but never mind ! See whats new when I return:D

Oh one last comment. I noted ebang said the sound on his unit still stopped after trying to use mp3/TTS. Having installed 8.417 I note that the sound still operates but in particular after attempting mp3 playback I get a message 'An error occured during audio playback', something has changed !

Ian

Thank you.
Have a nice time in France!

...
I think the error message means that process mp3d was not running, why?; we will continue when you're back :)

[dsa8310]

Link to dsa-all.22July09.zip:

http://www.2shared.com/file/6805196/aad60c09/dsa-all22July09.html

New: The Memory Booster menu item is included. A bug in the dsa-cygwin version is fixed - probably none has noticed it but me :)

The Memory Booster produces no effects (zero start-up delays) until activated.
The swapfile is created in the background. It still takes a very long time. Therefore the first boost will be delayed. Subsequent ones will be swifter as expectedly.
The menu item can be kept safely under a different patching, but it will be ineffective.

There was a small trade-off behind the scenes, the OS I used is not the latest shipped by TT but the latest published by TT under the GPL license. TT is behind in fulfilling its GPL obligations and so am I in keeping up with the latest TT kernel. As soon as the 2.6.17 TT kernel is published I will include it. But rest assured, there is no noticeable difference between the available 2.6.13 kernel and the 2.6.17 one - none.

I use this version on my own device.

[gadgetathome]

Hi All,

Been a while, but here we go.

Can anyone tell me the latest navcore I can run on my GO510. :confused:

Keep up the good work :D

Gadget

[dsa8310]

@ebang(&Ian):

Here is a link to a mp3d with debugging log:

http://www.2shared.com/file/6812313/b156b7e9/mp3d-a2dplog.html

Backup the file bin\mp3d from main storage first.
Then extract the above package over the top of main storage.

The log file will be named a2dp.log and it will be created in the root of main storage as soon as the unit starts its mp3d process.

Here is an excerpt:

main: Starting /mnt/sdcard/bin/mp3d...
MediaPlayerInitMessageServer: Creating server..
MediaPlayerInitMessageServer: Set server to listen (/var/run/mediaplayer.cmd)..
MediaPlayerInitMessageServer: Waiting for client..
InitUIController: message server initialized
InitUIController: Installed SIGTERM handler
main: Waiting for configuration commands...

If the file a2dp.log is created, this would mean that the mp3d process has been spawn.
After selecting a Jukebox song to play, further output will be added to the a2dp.log file.

Hopefully we will see the errors too.
I would need the file a2dp.log posted to take a look at it too (if generated at all).

[dsa8310]

Hi All,

Been a while, but here we go.

Can anyone tell me the latest navcore I can run on my GO510. :confused:

Keep up the good work :D

Gadget

Sure, NC v8.417, here:

http://download.tomtom.com/sweet/navcore/8.417.xl2009_live_2048_tts.CAB-navcore-XL_LIVE.cab

Plus dsa-all.22July09.zip/dsa-win.zip/dsa.exe from post #5078 (http://forum.gsmhosting.com/vbb/showpost.php?p=4680547&postcount=5078) above.

[ebang]

@ebang(&Ian):

Here is a link to a mp3d with debugging log:

http://www.2shared.com/file/6812313/b156b7e9/mp3d-a2dplog.html

Backup the file bin\mp3d from main storage first.
Then extract the above package over the top of main storage.

The log file will be named a2dp.log and it will be created in the root of main storage as soon as the unit starts its mp3d process.

Here is an excerpt:

main: Starting /mnt/sdcard/bin/mp3d...
MediaPlayerInitMessageServer: Creating server..
MediaPlayerInitMessageServer: Set server to listen (/var/run/mediaplayer.cmd)..
MediaPlayerInitMessageServer: Waiting for client..
InitUIController: message server initialized
InitUIController: Installed SIGTERM handler
main: Waiting for configuration commands...

If the file a2dp.log is created, this would mean that the mp3d process has been spawn.
After selecting a Jukebox song to play, further output will be added to the a2dp.log file.

Hopefully we will see the errors too.
I would need the file a2dp.log posted to take a look at it too (if generated at all).
Hi dsa, I added this file over top of the existing one...I sent a pm with the a2DP.log you are referring to.

[ian2125]

@ebang(&Ian):

Here is a link to a mp3d with debugging log:

http://www.2shared.com/file/6812313/b156b7e9/mp3d-a2dplog.html

Backup the file bin\mp3d from main storage first.
Then extract the above package over the top of main storage.

The log file will be named a2dp.log and it will be created in the root of main storage as soon as the unit starts its mp3d process.

Here is an excerpt:

main: Starting /mnt/sdcard/bin/mp3d...
MediaPlayerInitMessageServer: Creating server..
MediaPlayerInitMessageServer: Set server to listen (/var/run/mediaplayer.cmd)..
MediaPlayerInitMessageServer: Waiting for client..
InitUIController: message server initialized
InitUIController: Installed SIGTERM handler
main: Waiting for configuration commands...

If the file a2dp.log is created, this would mean that the mp3d process has been spawn.
After selecting a Jukebox song to play, further output will be added to the a2dp.log file.

Hopefully we will see the errors too.
I would need the file a2dp.log posted to take a look at it too (if generated at all).

I should be packing for France but couldn't resist

http://www.2shared.com/file/6815163/6044cdf9/a2dp.html

Here is my log file following an attempt to play Kings of Leon

Have fun

Ian

[dsa8310]

Hi dsa, I added this file over top of the existing one...I sent a pm with the a2DP.log you are referring to.

I should be packing for France but couldn't resist

http://www.2shared.com/file/6815163/6044cdf9/a2dp.html

Here is my log file following an attempt to play Kings of Leon

Have fun

Ian

Bad news, mp3d and ttsserver are just producers of sound data. The consumer, which plays the sound, is ttn (PNDNavigator). For now, it refuses to do so...

However, if you create a file named usecmdlog.dat (any content, name is case sensitive) in the main storage, then ttn will produce a debug logfile too, named cmdlog.txt

You could post cmdlog.txt too, to check it out.

[dsa8310]

Link to dsa-all.22July09.zip, reposted:

http://www.2shared.com/file/6821701/145f9a66/dsa-all22July09.html

Slight adjustment of the Memory Boost menu item.

[ian2125]

Bad news, mp3d and ttsserver are just producers of sound data. The consumer, which plays the sound, is ttn (PNDNavigator). For now, it refuses to do so...

However, if you create a file named usecmdlog.dat (any content, name is case sensitive) in the main storage, then ttn will produce a debug logfile too, named cmdlog.txt

You could post cmdlog.txt too, to check it out.

dsa

Here is the cmdlog.txt file

http://www.2shared.com/file/6824147/aa0376d7/cmdlog.html

Ian

[sheephorse]

Hi Guys

i have a tomtom one which has the following- App 7.903 OS:2344 GPS v1.21 Boot 5.0500 Map:great Britain v605.0

i want to format the whole card and follow the guide by Albert's easy activator but im not sure what Navcore to download, i downloaded the UK.ROI.830.2305 map and the latest tomtom keygen also do i have to download any other programs?

i would really appreciate anyone's help

Many Thanks

Barry :cool:

[Nasse]

Hey there.

I've been away for awhile and see that things have happened in here :) Could someone please tell me what the latest and greatest navcore for my Go 720 is?

[tendriver]

Hey there.

I've been away for awhile and see that things have happened in here :) Could someone please tell me what the latest and greatest navcore for my Go 720 is?

Official 8.351 is as good as any.

[dsa8310]

dsa

Here is the cmdlog.txt file

http://www.2shared.com/file/6824147/aa0376d7/cmdlog.html

Ian

So, the TTS process (ttsserver?) is NOT running?!

I wonder how ebang's cmdlog.txt looks like...

[ebang]

Bad news, mp3d and ttsserver are just producers of sound data. The consumer, which plays the sound, is ttn (PNDNavigator). For now, it refuses to do so...

However, if you create a file named usecmdlog.dat (any content, name is case sensitive) in the main storage, then ttn will produce a debug logfile too, named cmdlog.txt

You could post cmdlog.txt too, to check it out.

dsa, I am not sure how to create this...how am I generating usecmdlog....is it a text doc. in notepad?

[ian2125]

So, the TTS process (ttsserver?) is NOT running?!

I wonder how ebang's cmdlog.txt looks like...

Well it's down to you guys now. I'm hopefully not going to get lost in France !

Au Revoir

Ian

[dsa8310]

Well it's down to you guys now. I'm hopefully not going to get lost in France !

Au Revoir

Ian

A bientot!

[dsa8310]

dsa, I am not sure how to create this...how am I generating usecmdlog....is it a text doc. in notepad?

just make a usecmdlog.dat file, any content, with notepad. Extension dat, name usecmdlog, all lowercase.

Wait, here's a link to it:

http://www.2shared.com/file/6827554/3fad111e/usecmdlog.html

unzip it to main storage.

Then start-up device and wait for a while, do not do anything but moving to the main navigation screen.

Reconnect to PC, copy cmdlog.txt from device to pc, zip it and upload it to site www.2shared.com. Then publish the link.

[ebang]

just make a usecmdlog.dat file, any content, with notepad. Extension dat, name usecmdlog, all lowercase.

Wait, here's a link to it:

http://www.2shared.com/file/6827554/3fad111e/usecmdlog.html

unzip it to main storage.

Then start-up device and wait for a while, do not do anything but moving to the main navigation screen.

Reconnect to PC, copy cmdlog.txt from device to pc, zip it and upload it to site www.2shared.com (http://www.2shared.com). Then publish the link.

I am not getting cmdlog.txt on my device...I tried twice and still nothing

[dsa8310]

I am not getting cmdlog.txt on my device...I tried twice and still nothing

Now, I do have a test.8417.zip link:

http://www.2shared.com/file/6828835/4e4b050b/test8417.html

Please extract it on device's main storage. Do run v8.417!

Then start-up and wait for a minute or so while in the main screen.
You may also try a TTS (click on lower left corner with a computer voice selected).

Reconnect to PC and get TWO files:

1) launch.log -- may be viewed as "launch" under Windows.

2) cmdlog.txt -- may be viewed as "cmdlog" under Windows.

Zip them and publish them please.

[ebang]

Now, I do have a test.8417.zip link:

http://www.2shared.com/file/6828835/4e4b050b/test8417.html

Please extract it on device's main storage. Do run v8.417!

Then start-up and wait for a minute or so while in the main screen.
You may also try a TTS (click on lower left corner with a computer voice selected).

Reconnect to PC and get TWO files:

1) launch.log -- may be viewed as "launch" under Windows.

2) cmdlog.txt -- may be viewed as "cmdlog" under Windows.

Zip them and publish them please.

Here are the links:

http://www.2shared.com/file/6829593/eda3bc82/launch.html
http://www.2shared.com/file/6829594/73c72921/cmdlog.html

[dsa8310]

Here are the links:

http://www.2shared.com/file/6829593/eda3bc82/launch.html
http://www.2shared.com/file/6829594/73c72921/cmdlog.html

Thanks.

What about the TTS test, did the computer voice work?

[dsa8310]

Thanks.

What about the TTS test, did the computer voice work?

Judging from your cmdlog.txt as compared to mine an Ian's, your ttsserver IS running. Please select a computer voice and use it by clicking the lower left corner of the main screen.
(I added an extra hack to this test.8417 version)

[ebang]

Judging from your cmdlog.txt as compared to mine an Ian's, your ttsserver IS running. Please select a computer voice and use it by clicking the lower left corner of the main screen.
(I added an extra hack to this test.8417 version)


computer voices are still not working.

[dsa8310]

Hi Guys

i have a tomtom one which has the following- App 7.903 OS:2344 GPS v1.21 Boot 5.0500 Map:great Britain v605.0

i want to format the whole card and follow the guide by Albert's easy activator but im not sure what Navcore to download, i downloaded the UK.ROI.830.2305 map and the latest tomtom keygen also do i have to download any other programs?

i would really appreciate anyone's help

Many Thanks

Barry :cool:

Read post #5075 (http://forum.gsmhosting.com/vbb/showpost.php?p=4678824&postcount=5075).

OR, just do the map patching procedures, two: patch your current ttsystem on device with yDGpatch and then install the new map on device an run RunmeforallAutomatic from within Easyusetools... , option 1.
Search the thread for items.

[dsa8310]

...
There was a small trade-off behind the scenes, the OS I used is not the latest shipped by TT but the latest published by TT under the GPL license. TT is behind in fulfilling its GPL obligations and so am I in keeping up with the latest TT kernel. As soon as the 2.6.17 TT kernel is published I will include it. But rest assured, there is no noticeable difference between the available 2.6.13 kernel and the 2.6.17 one - none.
...


I think I got carried away here, both TT's kernel and mine are same version, 2.6.13. That is good!
Theirs is a more recent build - which is indeed not available though the link is published on their website ?!

[uberdude]

THESE CAMS ARE A COMBINATION OF MY OWN SUBSCRIPTIONS TO TOMTOM AND THOSE COMPILED BY THE MAVERICK, ALL CREDIT FOR THESE CAMS GO TO THE MAVERICK FOR THE TIRELESS WORK HE DOES WITHIN THE TOMTOM COMMUNITY AND FOR THE HARD WORK HE PUTS INTO COMPILING AND UPDATING THE META.TXT FILES

please note
ALWAYS make a backup of your tomtom before you tinker with it. either by using tomtom home or just by copying the entire contents of your memory card or device to your pc.

NEW SPEED CAMS 25.07.09
=====================

Latest Version

Safety_Cam_NZ_TomTom 1348
Safety_Cam_AT_TomTom 3169
Safety_Cam_BE_TomTom 3170
Safety_Cam_DE_TomTom 3171
Safety_Cam_ES_TomTom 3172
Safety_Cam_FI_TomTom 3173
Safety_Cam_FR_TomTom 3174
Safety_Cam_UK_TomTom 3175
Safety_Cam_IT_TomTom 3176
Safety_Cam_NL_TomTom 3177
Safety_Cam_NO_TomTom 3178
Safety_Cam_PT_TomTom 3179
Safety_Cam_SE_TomTom 3180
Safety_Cam_PL_TomTom 3181
Safety_Cam_CZ_TomTom 3182
Safety_Cam_ZA_TomTom 2871
Safety_Cam_AU_TomTom 3184
Safety_Cam_BR_TomTom 3185
Safety_Cam_US_Canada_TomTom 3164
Safety_Cam_NL_Premium 3143
Safety_Cam_FR_Premium 3144
Safety_Cam_DE_Premium 3145
Safety_Cam_UK_Premium 3146

http://imgkk.com/images/1wdhi24r.png


http://rapidshare.com/files/259777353/25.07.09.rar

===============================================

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.
now includes us and Canadian cams

to activate these cameras on your map copy and paste The two files .VER and .Ov2 for each camera into your map folder on your device or memory card and use alberts easy activator or benbbs's key gen to activate them

=========================================
benbbs
http://imgkk.com/images/1wdhi24r.png
KEYGEN
http://rapidshare.com/files/240359914/ISO-8859-1__TomTom_Keygen_v3.1C.zip
META

http://rapidshare.com/files/250319161/ISO-8859-1__meta.rar
=========================================
alberts easy installer
http://www.megaupload.com/?d=94JT300Z
=========================================

THE FOLLOWING IS A NOTE FROM MSUBEDAR AND THE CREDIT FOR IT IS RIGHTLY HIS.

ALSO NOTE
These Camera files I post up here are NOT POI's.... On most new Navcore's you cannot see them as a POI (However, on some older versions I have seen them visible as a POI), As these are original TomTom files, your tomtom NC will read them as originals after they have been patched to your device so it does not need to show them as a POI. Your TomTom will know what to do with them and automatically will add a warning beep etc which is something you can choose and change to which beep you want etc. BUT AGAIN, THESE FILES ARE NOT RECOGNIZED AS A POI. (For example if you also use SCDB Camera files or PocketGPS Camera's, you will notice that they are available as POI's so you have the normal settings available to you to change if you wish.)

Once the files have been patched to your device (.dct files created) then just put all the files in your map folder (.ver file not needed but no harm is done if you also put them in).

To check if they work: (Tip: I would just switch off any other camera files you may have in the POI section like PGPS or SCDB Camera's to avoid confusion while testing)

Create a route where you know you will be going past a Camera (To be sure, create the route so you are on the correct side of the road, in the same direction the Camera is facing) and in Route Summary, do a Demo of the Route (at 500% is fine) and if the camera shows up whilst its on the Demo and it beeps then you know everything is working.

HOPE THIS HELPS

[richgg58]

This is ****e everything is blocked crap site

[Nasse]

This is ****e everything is blocked crap site
Very constructive. Why would you say that?

[BuMobiles]

This is ****e everything is blocked crap site

Try using the search button or ask someone in the correct tone

[lars-mad]

hi i got a brand new n96 what do i need and how to install tomtom on my phone i am from scandinavia so i need maps and so for it too help please!

[LoPHaT]

Greetings,

I am looking to upgrade two (2) TomTom 510 GOs (One is mine, and the other is a family members').

I have been looking around this thread for a while and I did find some links that dsa posted for another user a while back, but these links seem to be dead (references to dsa-all.17July09.zip).

I am looking to upgrade to the latest maps and Navcore available for USA & Canada.

Here is the info for the two units I have:


Device #1:


Device ID AKUAQ A2CQN
App 7.120 (8459/070816) OS:2303
GPS v1.21, Boot 4.8600
Map: 'USA_and_Canada' v675.1409

Device #2:


Device ID AKTA2 DAGSN
App 7.903 (9183/081205) OS: 2344
GPS v1.21, Boot 4.8600
Map: 'USA_and_Canada' v650.1072


Though it may make no difference, please note the software differences on the two devices.


I would greatly appreciate your assistance!! :)

[dsa8310]

Greetings,

I am looking to upgrade two (2) TomTom 510 GOs (One is mine, and the other is a family members').

I have been looking around this thread for a while and I did find some links that dsa posted for another user a while back, but these links seem to be dead (references to dsa-all.17July09.zip).

I am looking to upgrade to the latest maps and Navcore available for USA & Canada.

Here is the info for the two units I have:


Device #1:


Device ID AKUAQ A2CQN
App 7.120 (8459/070816) OS:2303
GPS v1.21, Boot 4.8600
Map: 'USA_and_Canada' v675.1409

Device #2:


Device ID AKTA2 DAGSN
App 7.903 (9183/081205) OS: 2344
GPS v1.21, Boot 4.8600
Map: 'USA_and_Canada' v650.1072


Though it may make no difference, please note the software differences on the two devices.


I would greatly appreciate your assistance!! :)

Run dsa-all.22July.zip/dsa-win.zip/dsa.exe from post #5085 (http://forum.gsmhosting.com/vbb/showpost.php?p=4683867&postcount=5085) with device connected to PC. Check off box labeled Install and the target drive will appear displayed below.
Download NC v8. 417 from http://download.tomtom.com/sweet/navcore/8.417.xl2009_live_2048_tts.CAB-navcore-XL_LIVE.cab and open it with the TT CAB open button.
Push the big Patch button and answer yes to install on device drive.
Disconnect from PC and let device start-up. Then reconnect (even if there was no available map yet).

Get the NA 830.2284 map and install it on device. Actually get a NA version 830 apropriately sized map for your storage size.
Get the Easyusetools package and run command RunMeforAllAutomatic from within folder Easyusetools..., option 1, with device connected to PC.

Also, add on device the LoquendoTTS.zip folder INSTEAD of the eventual existing LoquendoTTS one, firstly, to have computer voices available.

Use the search button to find the missing tools/maps/items, etc.

[dsa8310]

@ebang:

Have you checked out the v8.417 ttsystem with v7.903 sound device driver on your device yet?

[LoPHaT]

Run dsa-all.22July.zip/dsa-win.zip/dsa.exe from post #5085 (http://forum.gsmhosting.com/vbb/showpost.php?p=4683867&postcount=5085) with device connected to PC. Check off box labeled Install and the target drive will appear displayed below.
Download NC v8. 417 from http://download.tomtom.com/sweet/navcore/8.417.xl2009_live_2048_tts.CAB-navcore-XL_LIVE.cab and open it with the TT CAB open button.
Push the big Patch button and answer yes to install on device drive.
Disconnect from PC and let device start-up. Then reconnect (even if there was no available map yet).

Get the NA 830.2284 map and install it on device. Actually get a NA version 830 apropriately sized map for your storage size.
Get the Easyusetools package and run command RunMeforAllAutomatic from within folder Easyusetools..., option 1, with device connected to PC.

Also, add on device the LoquendoTTS.zip folder INSTEAD of the eventual existing LoquendoTTS one, firstly, to have computer voices available.

Use the search button to find the missing tools/maps/items, etc.


Brilliant!

Thank you!

[LoPHaT]

Run dsa-all.22July.zip/dsa-win.zip/dsa.exe from post #5085 (http://forum.gsmhosting.com/vbb/showpost.php?p=4683867&postcount=5085) with device connected to PC. Check off box labeled Install and the target drive will appear displayed below.
Download NC v8. 417 from http://download.tomtom.com/sweet/navcore/8.417.xl2009_live_2048_tts.CAB-navcore-XL_LIVE.cab and open it with the TT CAB open button.
Push the big Patch button and answer yes to install on device drive.
Disconnect from PC and let device start-up. Then reconnect (even if there was no available map yet).

Get the NA 830.2284 map and install it on device. Actually get a NA version 830 apropriately sized map for your storage size.
Get the Easyusetools package and run command RunMeforAllAutomatic from within folder Easyusetools..., option 1, with device connected to PC.

Also, add on device the LoquendoTTS.zip folder INSTEAD of the eventual existing LoquendoTTS one, firstly, to have computer voices available.

Use the search button to find the missing tools/maps/items, etc.


Hey dsa, or anyone else, could you please explain this step (in red) a bit more?

[tendriver]

@LoPHat

You need at least a 2GB SD card to use a North America map.

[dsa8310]

Hey dsa, or anyone else, could you please explain this step (in red) a bit more?

Get LoquendoTTS.zip from post #2213 (http://forum.gsmhosting.com/vbb/showpost.php?p=4166847&postcount=2213) and extract it over the top of your main storage. In case there is a LoquendoTTS folder already on device, erase it fully first.

[LoPHaT]

@LoPHat

You need at least a 2GB SD card to use a North America map.

Yikes! Good to know. I thought I read somewhere earlier in this thread that there was a 1GB version... Is that true? If so, what are they cutting out from the 2GB version?

[tendriver]

Yikes! Good to know. I thought I read somewhere earlier in this thread that there was a 1GB version... Is that true? If so, what are they cutting out from the 2GB version?

USA & Canada maps are very basic maps of less than 1GB for small memory devices. North America maps are fully detailed & featured for larger memories.

[dsa8310]

Yikes! Good to know. I thought I read somewhere earlier in this thread that there was a 1GB version... Is that true? If so, what are they cutting out from the 2GB version?

Until you get (find/download) a different map or/and SD, you could apply the Easyusetools map patching procedure over the existing (on device) map and check the new v8.417 NC out.

Move to main menu 4 out of 5 and click on item labeled "x40 Skin", it's fully featured.

[dsa8310]

Until you get (find/download) a different map or/and SD, you could apply the Easyusetools map patching procedure over the existing (on device) map and check the new v8.417 NC out.

Move to main menu 4 out of 5 and click on item labeled "x40 Skin", it's fully featured.

One more thing: if your device has a microphone, you will need also the folder named ASR. Extract it over the top from cabinet http://download.tomtom.com/sweet/navcore/8.351-go940.CAB-navcore-GO.cab (just the ASR folder, nothing else).

[Hiddenvision]

After reading some of the great contributions,
I thought I would add a tool for all you TT heads..
It may already exist or perhaps even be total unrequired.!!!

This app will need mscomctl.ocx.
I am sure you can find it if you do not already have it in system32.


Nice and easy,

Create a folder, (or use it in your easytools/progs folder)
unrar the attached file,
run the exe, (download the ocx if it requires it)
Drag and Drop file/s onto the main screen.


It will preload 'meta.txt' if it is in the working folder.
Can create a new file called 'newmeta.txt' in app folder.
Also creates '.ini' file (in app folder) for screen position on reload.
Other settings are not saved, cos I am lazy :rolleyes:

Handy for spotting duplicate, missing or invalid named keys,
Or even to just resort and organise your meta's.


Thats it...

This small app is just an idea and is working enough for me to pass along,
I hope that it will inspire a well built meta file organiser to be provided by the main stream writers.
If the need permits....

If you want it to do something else then find me and ask.!

Hv.

[dsa8310]

Link to dsa-all.22July09.zip, refreshed:

http://www.2shared.com/file/6860598/f2f98c40/dsa-all22July09.html

Nothing new but a better Memory Boost icon.
(previous versions are deleted)

[Hiddenvision]

Couple of changes before you find the error !

[ebang]

@ebang:

Have you checked out the v8.417 ttsystem with v7.903 sound device driver on your device yet?

Hey dsa, I gave that a try and still no change with TTS or jukebox.

[ebang]

@ebang:

Have you checked out the v8.417 ttsystem with v7.903 sound device driver on your device yet?

Hey dsa, I gave that a try and still no change with TTS or jukebox.

[ainhoavega]

Hi, I need an activation code for the map Central_and_Eastern_Europe_825_2159. My info is:

1. Application: TomTom Application for ONEv4 Version 7.903
2. Device type: TomTom ONE NEW VERSION
3. Map: Central_and_Eastern_Europe_825_2159
4. Device ID: AKXAA BSMR2

Any help would really be appreciated, thanks!

[tendriver]

Hi, I need an activation code for the map Central_and_Eastern_Europe_825_2159. My info is:

1. Application: TomTom Application for ONEv4 Version 7.903
2. Device type: TomTom ONE NEW VERSION
3. Map: Central_and_Eastern_Europe_825_2159
4. Device ID: AKXAA BSMR2

Any help would really be appreciated, thanks!

There is not an activation code for TomTom maps!!!!

[ainhoavega]

There is not an activation code for TomTom maps!!!!

Okay, sorry, I didn't know that. What I'm trying to say is, I have the Eastern and Central Europe map mentioned above in my device, but when I try to change maps to that one, it doesn't appear on the list, anyone know why? Again, thanks in advance for any help!

[delix1]

hello.i'm looking for north africa map? can any one help me?

[tendriver]

hello.i'm looking for north africa map? can any one help me?

There is not a North Africa map.

[jmermel]

hello.i'm looking for north africa map? can any one help me?

TomTom does not have N. Africa Maps.

[delix1]

there is any africa map???

[ainhoavega]

Hi, I have a problem with the map Central_and_Eastern_Europe_825_2159; TomTom Home says the map is on the device, but I can't access the map when I turn the device on. Any ideas why this might be happening?

[jmermel]

Hi, I have a problem with the map Central_and_Eastern_Europe_825_2159; TomTom Home says the map is on the device, but I can't access the map when I turn the device on. Any ideas why this might be happening?
Have you activated it?

[tendriver]

there is any africa map???

There is a Southern Africa, but it is a VERY OLD version 730.2001. It is not available on this forum.

[jmermel]

there is any africa map???
Not by TomTom. I believe that Sygic and Navigon make maps for Africa.

[jmermel]

there is any africa map???
Not by TomTom. I believe that Sygic and Navigon make maps for Africa.
What part of Africa [Country] are you looking for?

[ainhoavega]

Have you activated it?

I thought I had, but now I'm not sure. How do I get the activation code? The device doesn't even prompt me for the code anyway...

[jmermel]

I thought I had, but now I'm not sure. How do I get the activation code? The device doesn't even prompt me for the code anyway...
Your device ID is inside the ttnavigator.bif file.

[dsa8310]

Hi, I have a problem with the map Central_and_Eastern_Europe_825_2159; TomTom Home says the map is on the device, but I can't access the map when I turn the device on. Any ideas why this might be happening?

Search the thread for Easyusetools...,
Put map on device (better find the 830 version).
Connect device to PC.
Run command Runmeforallautomatic, option 1, from within folder Easyusetools...

Patch your NC (ttsystem) with yDGpatch - search for it.
Or, better upgrade your NC to v8.417, check my recent posts on how to do it.

[jmermel]

I thought I had, but now I'm not sure. How do I get the activation code? The device doesn't even prompt me for the code anyway...
Your device ID is inside the ttnavigator.bif file. Then you must use that to activate your mape with a map activator. Easy to find by Goggling. There are many

[ainhoavega]

Your device ID is inside the ttnavigator.bif file.

My device ID is AKXAA BSMR2; what I don't know is the activation code for the Central_and_Eastern_Europe_825_2159 Map, and the map doesn't even appear in the list when I try to change maps, even though TomTom Home says it's there...

[jmermel]

My device ID is AKXAA BSMR2; what I don't know is the activation code for the Central_and_Eastern_Europe_825_2159 Map, and the map doesn't even appear in the list when I try to change maps, even though TomTom Home says it's there...
Your meta code for that map is;
; Central_and_Eastern_Europe_825_2159
D0 15 C1 45 8A 9F F9 03 1A 01 91 BE DD 47 5E 8D DE_AT_CH-26.meta

You will need this in order to activate

[tendriver]

there is any africa map???

Not by TomTom. I believe that Sygic and Navigon make maps for Africa.

WRONG jmermel!! See post 5133!!!

[jmermel]

WRONG jmermel!! See post 5133!!!
You are correct. I should have said that there are no current maps of Africa by TomTom. Also please remember that South Africa is only a SMALL part of Africa.

[tendriver]

You are correct. I should have said that there are no current maps of Africa by TomTom. Also please remember that South Africa is only a SMALL part of Africa.

Please remember, the poster asked, "there is any africa map???".

[ainhoavega]

Your meta code for that map is;
; Central_and_Eastern_Europe_825_2159
D0 15 C1 45 8A 9F F9 03 1A 01 91 BE DD 47 5E 8D DE_AT_CH-26.meta

You will need this in order to activate

sorry I seem stupid, but I really don't understand... maybe it's because I use OS X but I can't edit the .meta file. Is there any way around this? Thank you so much for your patience and help.

[jmermel]

WRONG jmermel!! See post 5133!!!

Please remember, the poster asked, "there is any africa map???".

POST #5127 "hello.i'm looking for north africa map? can any one help me?"
WRONG! tendriver
No wonder people complain about your attitude. Take a deep breath.

[jmermel]

WRONG jmermel!! See post 5133!!!

Please remember, the poster asked, "there is any africa map???".

POST #5127 "hello.i'm looking for north africa map? can any one help me?"
WRONG! tendriver - This post clearly says North
No wonder people complain about your attitude. Take a deep breath.

There is a saying; "If a fish kept his mouth shut, he wouldn't be caught."

[jmermel]

sorry I seem stupid, but I really don't understand... maybe it's because I use OS X but I can't edit the .meta file. Is there any way around this? Thank you so much for your patience and help.
Look at Post #5138. He explained it to you. It is very easy to do.

[dsa8310]

sorry I seem stupid, but I really don't understand... maybe it's because I use OS X but I can't edit the .meta file. Is there any way around this? Thank you so much for your patience and help.

It'd be good to have access to a Windows PC. Or a dual boot PC (OS X + Windows), for TT's sake. For example, I use Linux&Windows for TT.

[tendriver]

there is any africa map???

POST #5127 "hello.i'm looking for north africa map? can any one help me?"
WRONG! tendriver - This post clearly says North
No wonder people complain about your attitude. Take a deep breath.

There is a saying; "If a fish kept his mouth shut, he wouldn't be caught."

Wrong again, jmermel. You might apply your saying to yourself.

[Ner62]

Hi,

Could you tell me what you think is the best software version to put on my TomTom One Series 30 1gb Memory not XL.

At present i have v8.041

I would like a version to continue to run my 830.2305 maps.

Thanks

[dsa8310]

Hi,

Could you tell me what you think is the best software version to put on my TomTom One Series 30 1gb Memory not XL.

At present i have v8.041

I would like a version to continue to run my 830.2305 maps.

Thanks

The latest NCs out are v8.450 (Asian), v8.417, v8.414, v8.351.
I have v8.417 on my TT.
You may check them all out with dsa.exe. Also, see whether an L34/35/36 emulation would work better than the default x40 one (though an L34/35/36 selection is done, the corresponding Skin button will still be labeled x40).
The source TT CABs have been published recently, look for them.

[mirakels]

a new version, 8.370, for the go series: http://download.tomtom.com/sweet/navcore/8.370.go940.CAB-navcore-GO.cab

[dsa8310]

a new version, 8.370, for the go series: http://download.tomtom.com/sweet/navcore/8.370.go940.CAB-navcore-GO.cab

Supported by dsa.exe! :)

[dsa8310]

There's a new TTHome release too (2.7.0.1761), works well, but still no update of ALL maps on device (just the current one).

There isn't available an operate my go for NC v8.370 yet.

[dsa8310]

a new version, 8.370, for the go series: http://download.tomtom.com/sweet/navcore/8.370.go940.CAB-navcore-GO.cab

Supported by dsa.exe! :)

@Ian, ebang:

Give it a try, it's a slim chance it might handle sound differently.

[tendriver]

Version 8.370
(TomTom x40 LIVE)

* Improved RDS-TMC support in non-LIVE countries
* Improved user interface
* Improved functionality

http://download.tomtom.com/sweet/navcore/8.370.go540-go740.CAB-navcore-GO.cab

http://download.tomtom.com/sweet/navcore/8.370.go940.CAB-navcore-GO.cab

I'm using the 940 .cab

2 MAJOR things.

Safety Alerts setup now functions on my 720 in x40 emu.

FM instructions to your car radio is available on my 720 in x20 or x30 emu, but not x40.

It appears that a TT Home "Operate my device" update for 8.370 is not available yet.
__________________

[tendriver]

It wasn't mentioned in an earlier post that TTHome release 2.7.0.1761 is a BETA version.

[dsa8310]

I wonder when is TT going to release a LIVE NC that will let non GPRS devices access the LIVE services/subscriptions too, via BT and the (capable) phone?

Setting up the internet access via phone is a matter of just two instructions and it works so well, e.g.:

===1) ~ # rfcomm bind rfcomm1 **:**:**:**:**:** 7
~ # rfcomm
rfcomm0: ****
rfcomm1: **:**:**:**:**:** channel 7 clean

===2) ~ # pppd rfcomm1 115200 call ttgobuddy &
~ # ATZ
OK
at+cgdcont=5,"IP","internet"
OK
ATD*99***5#
CONNECT
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm1
CHAP authentication succeeded: Congratulations!
CHAP authentication succeeded
Could not determine remote IP address: defaulting to 10.64.64.64
local IP address ***.***.***.***
remote IP address 10.64.64.64
primary DNS address ***.***.***.***
secondary DNS address ***.***.***.***

~ # cat /proc/net/route
Iface Destination Gateway Flags RefCnt Use Metric Mask
ppp0 4040400A 00000000 0005 0 0 0 FFFFFFF
ppp0 00000000 00000000 0001 0 0 0 0000000

~ # wget http://download.tomtom.com/sweet/navcore/8.370.go940.CAB-navcore-GO.cab
Connecting to download.tomtom.com
8.370.go940.CAB-navc 0% | | 48128 1:04:49 ETA
~ #

All commands (but rfcomm) are readily available on device... The above is a transcript of an internet session on my TT.

[tendriver]

I wonder when is TT going to release a LIVE NC that will let non GPRS devices access the LIVE services/subscriptions too, via BT and the (capable) phone?

Setting up the internet access via phone is a matter of just two instructions and it works so well, e.g.:

===1) ~ # rfcomm bind rfcomm1 **:**:**:**:**:** 7
~ # rfcomm
rfcomm0: ****
rfcomm1: **:**:**:**:**:** channel 7 clean

===2) ~ # pppd rfcomm1 115200 call ttgobuddy &
~ # ATZ
OK
at+cgdcont=5,"IP","internet"
OK
ATD*99***5#
CONNECT
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm1
CHAP authentication succeeded: Congratulations!
CHAP authentication succeeded
Could not determine remote IP address: defaulting to 10.64.64.64
local IP address ***.***.***.***
remote IP address 10.64.64.64
primary DNS address ***.***.***.***
secondary DNS address ***.***.***.***

~ # cat /proc/net/route
Iface Destination Gateway Flags RefCnt Use Metric Mask
ppp0 4040400A 00000000 0005 0 0 0 FFFFFFF
ppp0 00000000 00000000 0001 0 0 0 0000000

~ # wget http://download.tomtom.com/sweet/navcore/8.370.go940.CAB-navcore-GO.cab
Connecting to download.tomtom.com
8.370.go940.CAB-navc 0% | | 48128 1:04:49 ETA
~ #

All commands (but rfcomm) are readily available on device... The above is a transcript of an internet session on my TT.

With your phone connected to both the internet & your tomtom, try Live services, weather and/or Google.

[uberdude]

THESE CAMS ARE A COMBINATION OF MY OWN SUBSCRIPTIONS TO TOMTOM AND THOSE COMPILED BY THE MAVERICK, ALL CREDIT FOR THESE CAMS GO TO THE MAVERICK FOR THE TIRELESS WORK HE DOES WITHIN THE TOMTOM COMMUNITY AND FOR THE HARD WORK HE PUTS INTO COMPILING AND UPDATING THE META.TXT FILES

please note
ALWAYS make a backup of your tomtom before you tinker with it. either by using tomtom home or just by copying the entire contents of your memory card or device to your pc.

NEW SPEED CAMS 28.07.09
=====================

Latest Version

Safety_Cam_NZ_TomTom 1348
Safety_Cam_AT_TomTom 3192
Safety_Cam_BE_TomTom 3193
Safety_Cam_DE_TomTom 3194
Safety_Cam_ES_TomTom 3195
Safety_Cam_FI_TomTom 3196
Safety_Cam_FR_TomTom 3197
Safety_Cam_UK_TomTom 3198
Safety_Cam_IT_TomTom 3199
Safety_Cam_NL_TomTom 3200
Safety_Cam_NO_TomTom 3201
Safety_Cam_PT_TomTom 3202
Safety_Cam_SE_TomTom 3203
Safety_Cam_PL_TomTom 3204
Safety_Cam_CZ_TomTom 3205
Safety_Cam_ZA_TomTom 2871
Safety_Cam_AU_TomTom 3207
Safety_Cam_BR_TomTom 3208
Safety_Cam_US_Canada_TomTom 3209
Safety_Cam_NL_Premium 3143
Safety_Cam_FR_Premium 3144
Safety_Cam_DE_Premium 3145
Safety_Cam_UK_Premium 3146

http://imgkk.com/images/1wdhi24r.png


http://rapidshare.com/files/261043170/28.07.09.rar

===============================================

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.
now includes us and Canadian cams

to activate these cameras on your map copy and paste The two files .VER and .Ov2 for each camera into your map folder on your device or memory card and use alberts easy activator or benbbs's key gen to activate them

=========================================
benbbs
http://imgkk.com/images/1wdhi24r.png
KEYGEN
http://rapidshare.com/files/240359914/ISO-8859-1__TomTom_Keygen_v3.1C.zip
META

http://rapidshare.com/files/250319161/ISO-8859-1__meta.rar
=========================================
alberts easy installer
http://www.megaupload.com/?d=94JT300Z
=========================================

THE FOLLOWING IS A NOTE FROM MSUBEDAR AND THE CREDIT FOR IT IS RIGHTLY HIS.

ALSO NOTE
These Camera files I post up here are NOT POI's.... On most new Navcore's you cannot see them as a POI (However, on some older versions I have seen them visible as a POI), As these are original TomTom files, your tomtom NC will read them as originals after they have been patched to your device so it does not need to show them as a POI. Your TomTom will know what to do with them and automatically will add a warning beep etc which is something you can choose and change to which beep you want etc. BUT AGAIN, THESE FILES ARE NOT RECOGNIZED AS A POI. (For example if you also use SCDB Camera files or PocketGPS Camera's, you will notice that they are available as POI's so you have the normal settings available to you to change if you wish.)

Once the files have been patched to your device (.dct files created) then just put all the files in your map folder (.ver file not needed but no harm is done if you also put them in).

To check if they work: (Tip: I would just switch off any other camera files you may have in the POI section like PGPS or SCDB Camera's to avoid confusion while testing)

Create a route where you know you will be going past a Camera (To be sure, create the route so you are on the correct side of the road, in the same direction the Camera is facing) and in Route Summary, do a Demo of the Route (at 500% is fine) and if the camera shows up whilst its on the Demo and it beeps then you know everything is working.

HOPE THIS HELPS

[jamescv7]

Hi, can anyone tell me how to install a Western europe map on my Tomtom One XL
The map is v825.2159, and my device number is AK6AEAADSA.
I've tried no end of methods with no result, so a simple step by step set of instructions would be greatly appreciated!!
Thanks in advance, James

[ebang]

@Ian, ebang:

Give it a try, it's a slim chance it might handle sound differently.

Hey dsa, no change with the sounds with this update.

[dsa8310]

Hi, can anyone tell me how to install a Western europe map on my Tomtom One XL
The map is v825.2159, and my device number is AK6AEAADSA.
I've tried no end of methods with no result, so a simple step by step set of instructions would be greatly appreciated!!
Thanks in advance, James

Read post #5138 (http://67.228.206.50/vbb/showpost.php?p=4697442&postcount=5138); upgrade to v8.370.

[delix1]

hello i'm looking for united kingdom map.my navcore 8.417 because i've got western end central map v830.2305 and when i'm looking location using a poscode then device let me use only 3 digit letters like M30 and then i have to find a street but i would like to find street using 6 digit letters like M30 8AN.what do u think what can be wrong.thanks my device it is tt go910

[Bungie]

hello i'm looking for united kingdom map.my navcore 8.417 because i've got western end central map v830.2305 and when i'm looking location using a poscode then device let me use only 3 digit letters like M30 and then i have to find a street but i would like to find street using 6 digit letters like M30 8AN.what do u think what can be wrong.thanks my device it is tt go910
sounds to me that your 'zip' folder files are out of date. Download the latest, and then it will work, but only for the UK & Netherlands.

[dsa8310]

Link to dsa-all.29July09.zip:

http://www.2shared.com/file/6904145/f591973e/dsa-all29July09.html

New: just keeping up with TT's published ARM Linux kernels (now build 301792).

[tendriver]

hello i'm looking for united kingdom map.my navcore 8.417 because i've got western end central map v830.2305 and when i'm looking location using a poscode then device let me use only 3 digit letters like M30 and then i have to find a street but i would like to find street using 6 digit letters like M30 8AN.what do u think what can be wrong.thanks my device it is tt go910

LATEST POSTCODES GREAT BRITAIN AND NETHERLANDS :

http://rapidshare.com/files/229123623/zip.rar/

Extract and copy the "zip" folder to the root of your tt

[tkokid]

I am looking for the most current USA - Midwest (830.2284) regional map. I know this is a rare item to find but would really appreciate it if anyone has it out there. I am also looking for any of the other regional maps just to have them but the midwest one is the most important one to me.
MANY Thanks in advance

[tendriver]

I am looking for the most current USA - Midwest (830.2284) regional map. I know this is a rare item to find but would really appreciate it if anyone has it out there. I am also looking for any of the other regional maps just to have them but the midwest one is the most important one to me.
MANY Thanks in advance

You are persistent!!! LOL

The answer is still the same!!

1. Nobody buys the US Regional maps. The last 2, that I've seen, were US Western Region 825.2158 & US Western Region 720.1802.

2. You won't get any more detailed than North America 830.2284 or 2283.

[uberdude]

THESE CAMS ARE A COMBINATION OF MY OWN SUBSCRIPTIONS TO TOMTOM AND THOSE COMPILED BY THE MAVERICK, ALL CREDIT FOR THESE CAMS GO TO THE MAVERICK FOR THE TIRELESS WORK HE DOES WITHIN THE TOMTOM COMMUNITY AND FOR THE HARD WORK HE PUTS INTO COMPILING AND UPDATING THE META.TXT FILES

please note
ALWAYS make a backup of your tomtom before you tinker with it. either by using tomtom home or just by copying the entire contents of your memory card or device to your pc.

NEW SPEED CAMS 30.07.09
=====================

Latest Version

Safety_Cam_NZ_TomTom 1348
Safety_Cam_AT_TomTom 3214
Safety_Cam_BE_TomTom 3215
Safety_Cam_DE_TomTom 3216
Safety_Cam_ES_TomTom 3217
Safety_Cam_FI_TomTom 3218
Safety_Cam_FR_TomTom 3219
Safety_Cam_UK_TomTom 3220
Safety_Cam_IT_TomTom 3221
Safety_Cam_NL_TomTom 3222
Safety_Cam_NO_TomTom 3223
Safety_Cam_PT_TomTom 3224
Safety_Cam_SE_TomTom 3225
Safety_Cam_PL_TomTom 3226
Safety_Cam_CZ_TomTom 3227
Safety_Cam_ZA_TomTom 2871
Safety_Cam_AU_TomTom 3229
Safety_Cam_BR_TomTom 3230
Safety_Cam_US_Canada_TomTom 3231
Safety_Cam_NL_Premium 3143
Safety_Cam_FR_Premium 3144
Safety_Cam_DE_Premium 3145
Safety_Cam_UK_Premium 3146

http://imgkk.com/images/1wdhi24r.png


http://rapidshare.com/files/261808579/30.07.09.rar

===============================================

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.
now includes us and Canadian cams

to activate these cameras on your map copy and paste The two files .VER and .Ov2 for each camera into your map folder on your device or memory card and use alberts easy activator or benbbs's key gen to activate them

=========================================
benbbs
http://imgkk.com/images/1wdhi24r.png
KEYGEN
http://rapidshare.com/files/240359914/ISO-8859-1__TomTom_Keygen_v3.1C.zip
META

http://rapidshare.com/files/250319161/ISO-8859-1__meta.rar
=========================================
alberts easy installer
http://www.megaupload.com/?d=94JT300Z
=========================================

THE FOLLOWING IS A NOTE FROM MSUBEDAR AND THE CREDIT FOR IT IS RIGHTLY HIS.

ALSO NOTE
These Camera files I post up here are NOT POI's.... On most new Navcore's you cannot see them as a POI (However, on some older versions I have seen them visible as a POI), As these are original TomTom files, your tomtom NC will read them as originals after they have been patched to your device so it does not need to show them as a POI. Your TomTom will know what to do with them and automatically will add a warning beep etc which is something you can choose and change to which beep you want etc. BUT AGAIN, THESE FILES ARE NOT RECOGNIZED AS A POI. (For example if you also use SCDB Camera files or PocketGPS Camera's, you will notice that they are available as POI's so you have the normal settings available to you to change if you wish.)

Once the files have been patched to your device (.dct files created) then just put all the files in your map folder (.ver file not needed but no harm is done if you also put them in).

To check if they work: (Tip: I would just switch off any other camera files you may have in the POI section like PGPS or SCDB Camera's to avoid confusion while testing)

Create a route where you know you will be going past a Camera (To be sure, create the route so you are on the correct side of the road, in the same direction the Camera is facing) and in Route Summary, do a Demo of the Route (at 500% is fine) and if the camera shows up whilst its on the Demo and it beeps then you know everything is working.

HOPE THIS HELPS

[uberdude]

I am looking for the most current USA - Midwest (830.2284) regional map. I know this is a rare item to find but would really appreciate it if anyone has it out there. I am also looking for any of the other regional maps just to have them but the midwest one is the most important one to me.
MANY Thanks in advance

in that case your only recourse is to buy the maps you seek and maybe offer them to the scene. otherwise you will have a exceptionally long and fruitless wait.

[LoPHaT]

@LoPHat

You need at least a 2GB SD card to use a North America map.

I have finally acquired a 2GB SD card for the NA map upgrade process (on my TomTom Go 510) - Do I need to format the card in any way? Right now out of the box, it's formatted for FAT - should it be FAT32?

[dsa8310]

I have finally acquired a 2GB SD card for the NA map upgrade process (on my TomTom Go 510) - Do I need to format the card in any way? Right now out of the box, it's formatted for FAT - should it be FAT32?

FAT32 does not hurt, but give it a try with the current format first.
Do not forget about the LoquendoTTS folder.
Upgrade to v8.370, it has become available.

[tendriver]

I have finally acquired a 2GB SD card for the NA map upgrade process (on my TomTom Go 510) - Do I need to format the card in any way? Right now out of the box, it's formatted for FAT - should it be FAT32?

No need to format, FAT is perfect. I've got 1 FAT card & 1 FAT32 card. They both function equally well.

[LoPHaT]

Thank you both for the feedback.

Ughhh I'm having troubles upgrading my device.

Here's what I'm doing:

I've plugged my device (docked) into my PC, made sure TomTom Home is NOT running.

I run dsa.exe, choose x40 and then click the "open" button in the TT CAB area. I then click the "install" checkbox (it the populates the correct drive letter for my TomTom) and then I click "Patch" (I have done this for the 8.370/8.417 Navcore releases all with the same result below):

Result: DOS window shows up, then I get "Aborting, bad ttsystem?? Press Enter to continue..."

My TomTom device specs are posted on page 341 of this thread.

Your help would be greatly appreciated.

[dsa8310]

Thank you both for the feedback.

Ughhh I'm having troubles upgrading my device.

Here's what I'm doing:

I've plugged my device (docked) into my PC, made sure TomTom Home is NOT running.

I run dsa.exe, choose x40 and then click the "open" button in the TT CAB area. I then click the "install" checkbox (it the populates the correct drive letter for my TomTom) and then I click "Patch" (I have done this for the 8.370/8.417 Navcore releases all with the same result below):

Result: DOS window shows up, then I get "Aborting, bad ttsystem?? Press Enter to continue..."

My TomTom device specs are posted on page 341 of this thread.

Your help would be greatly appreciated.

1) Extract dsa-win.zip from dsa-all.29July09.zip.
2) Unzip dsa-win.zip to the Desktop.
3) Send dsa.exe from within folder Desktop\dsa-win to the Desktop (make a link).
4) Run Desktop\dsa.exe (the link).

Download the TT CAB named 8.370.go940.CAB-navcore-GO.cab, from this link http://download.tomtom.com/sweet/navcore/8.370.go940.CAB-navcore-GO.cab, to the Desktop or another convenient place on your PC.
Select it with the leftmost Open button.

Unless your Windows set-up is somehow "special", this recipe should work for you too.

[LoPHaT]

1) Extract dsa-win.zip from dsa-all.29July09.zip.
2) Unzip dsa-win.zip to the Desktop.
3) Send dsa.exe from within folder Desktop\dsa-win to the Desktop (make a link).
4) Run Desktop\dsa.exe (the link).

Download the TT CAB named 8.370.go940.CAB-navcore-GO.cab, from this link http://download.tomtom.com/sweet/navcore/8.370.go940.CAB-navcore-GO.cab, to the Desktop or another convenient place on your PC.
Select it with the leftmost Open button.

Unless your Windows set-up is somehow "special", this recipe should work for you too.


I'm not doing anything outside of what you have instructed... Is it because I'm on Windows 7? I tried running the dsa.exe in compatibility mode (Win XP, SP3 + Admin Privileges) and I get the same outcome. "Aborting, bad ttsystem?!"

Is there another method/approach I could try?

[dsa8310]

I'm not doing anything outside of what you have instructed... Is it because I'm on Windows 7? I tried running the dsa.exe in compatibility mode (Win XP, SP3 + Admin Privileges) and I get the same outcome. "Aborting, bad ttsystem?!"

Is there another method/approach I could try?

I have not tested it on windows 7. It might have to do with the cygwin dlls that aren't for windows 7?!

Get access to a Windows XP/Vista machine in the mean time...

Or to a Linux one, where you could run dsa.zip/dsa/dsa-cabpatch <TT CAB> as root. You will get a dsa_navcore.8370.zip that has to be unzipped to the device (SD) AFTER extracting (cabextract) the cabinet to the device first. But do not overwrite the data_*.chk files, the ones in the cabinet are newer/better.

Or, somebody could convey to you a link to an already generated dsa_navcore.8370.zip; extract first the cab to the sd, then the dsa_navcore package - but do not overwrite data_*.chk.

[Eramaavaris]

Or, somebody could convey to you a link to an already generated dsa_navcore.8370.zip; extract first the cab to the sd, then the dsa_navcore package - but do not overwrite hdata_*.ck.

Hmm.. is this nc 8370.dll file for tthome available anywhere? And here is patched dsa_nc8370 :)

http://rapidshare.com/files/262144419/dsa_navcore.8370.zip

[Eramaavaris]

What does this "hard reset" do? Wipes out all files and put factory settings on, or what? Just curious, Thanks!

[tendriver]

Hmm.. is this nc 8370.dll file for tthome available anywhere? And here is patched dsa_nc8370 :)

http://rapidshare.com/files/262144419/dsa_navcore.8370.zip

TT Home "operate my device" update for 8.370 has not been released, so no .dll yet.

[dsa8310]

What does this "hard reset" do? Wipes out all files and put factory settings on, or what? Just curious, Thanks!

No, it starts a preferences dialog, from scratch, language, handsfree, wireless (if under x20/30 emulation), phonebook, etc. You wouldn't like it...
Things are also lost, you are warned at the beginning.

[dsa8310]

@LoPHaT


...
Or, somebody could convey to you a link to an already generated dsa_navcore.8370.zip; extract first the cab to the sd, then the dsa_navcore package - but do not overwrite data_*.chk.

Hmm.. is this nc 8370.dll file for tthome available anywhere? And here is patched dsa_nc8370 :)

http://rapidshare.com/files/262144419/dsa_navcore.8370.zip

Now you can do the manual installation on your device, with overwrite all:

1) Extract the v8.370 cab
2) Unzip dsa_navcore.8370.zip; do NOT overwrite the data_*.chk files (skins).
3) Extract LoquendoTTS.zip
Disconnect and start-up once.
4) Install the map folder - and patch it with Easyusetools.../RunMeForAllAutomatic, option 1.
Restart, go to main menu 4/5 and select "x40 Skin".

[LoPHaT]

@LoPHaT





Now you can do the manual installation on your device, with overwrite all:

1) Extract the v8.370 cab
2) Unzip dsa_navcore.8370.zip; do NOT overwrite the data_*.chk files (skins).
3) Extract LoquendoTTS.zip
Disconnect and start-up once.
4) Install the map folder - and patch it with Easyusetools.../RunMeForAllAutomatic, option 1.
Restart, go to main menu 4/5 and select "x40 Skin".

Hey dsa,

I've installed a Virtual PC instance of XP (XP Mode for Windows 7) and I will give the preferred method a shot first. If that doesn't work out, I will give this a go next. I really appreciate your assistance. You guys rock.

I think what makes this a bit tough, is that I upgrade so rarely - if I were to be doing this as often as you guys, it wouldn't be that bad. You guys have a great wealth of knowledge here - thank you for sharing.

Thanks again! I will report back soon.

[LoPHaT]

Well the Virtual XP Mode didn't cut it... the virtualization runs finicky - it would delete files that are being copied from my Windows 7 directories :eek:

Trying the manual method now.



@dsa

Can you detail the map folder install portion a bit more? I'm guessing I connect the device back to the PC, take the maps and put them in the appropriate map directory, then run the easyusetools?

[dsa8310]

Well the Virtual XP Mode didn't cut it... the virtualization runs finicky - it would delete files that are being copied from my Windows 7 directories :eek:

Trying the manual method now.

@dsa

Can you detail the map folder install portion a bit more? I'm guessing I connect the device back to the PC, take the maps and put them in the appropriate map directory, then run the easyusetools?

Each map gets into a top level directory, usually named like Western_and_Central_Europe_830_2305, North_America_830_2284 (you can get the "good" name from the ID line in the inner file <map-name>.pna). You have to extract together all map parts starting from one of the parts into a one folder which can be renamed as suggested above.

With maps on device and device connected to PC you run easyusetools/Runmeforallautomatic, option 1; the device ID is correctly guessed if device had been previously started-up at least once.

[LoPHaT]

Each map gets into a top level directory, usually named like Western_and_Central_Europe_830_2305, North_America_830_2284 (you can get the "good" name from the ID line in the inner file <map-name>.pna). ...

This portion was really helpful to know, thank you!

Here's my new dilemma:

With my 2GB CF Card I only have 1.67GB of free space remaining after following all of your steps for the manual upgrade process (except for the map install). I need 1.69GB (~20MB more) of free space to import the 830.2284 NA map you suggest using.


In trying to be pro-active, I tried this:

I found a TT map (USA Canada and Mexico P 830.2325) and have been trying that, but the easyusetools keeps failing out saying that there's no key for activation. I did add a Meta.txt file in the easyusetools "insert_meta_from_Map_here" folder that came with the map. I hope the syntax within the Meta file is correct... here's how I have it in the file:

; USA_Canada_and_Mexico_P
AF E8 D0 00 F1 EE 74 C0 19 B0 C6 F3 C5 79 37 E9 USA_Canada_and_Mexico_P-37.metaI also renamed the folder for the map and the map name within the Meta.txt file as it is shown in the .pna file. The map folder is on the root level of the device memory card.


If my attempt with the newer map won't work, what would guys suggest from here (aside from getting a new card) in trying to free up ~20MB of space to drop the 830.2284 NA map you suggest using on my device?

[dsa8310]

This portion was really helpful to know, thank you!

Here's my new dilemma:

With my 2GB CF Card I only have 1.67GB of free space remaining after following all of your steps for the manual upgrade process (except for the map install). I need 1.69GB (~20MB more) of free space to import the 830.2284 NA map you suggest using.


In trying to be pro-active, I tried this:

I found a TT map (USA Canada and Mexico P 830.2325) and have been trying that, but the easyusetools keeps failing out saying that there's no key for activation. I did add a Meta.txt file in the easyusetools "insert_meta_from_Map_here" folder that came with the map. I hope the syntax within the Meta file is correct... here's how I have it in the file:

; USA_Canada_and_Mexico_P
AF E8 D0 00 F1 EE 74 C0 19 B0 C6 F3 C5 79 37 E9 USA_Canada_and_Mexico_P-37.metaI also renamed the folder for the map and the map name within the Meta.txt file as it is shown in the .pna file. The map folder is on the root level of the device memory card.


If my attempt with the newer map won't work, what would guys suggest from here (aside from getting a new card) in trying to free up ~20MB of space to drop the 830.2284 NA map you suggest using on my device?


Get the latest Easyusetols from here:

http://www.ipmart-forum.com/attachment.php?attachmentid=516956&d=1248957040

It should have all metas.

In case you are in a hurry, add the found meta lines in file:

Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher\Progs\me ta.txt

(position does not matter).

Then do the Runmeforallautomatic, option 1, with dev conn to pc.

[LoPHaT]

Success!!! ... Kinda.

Thanks dsa, it seems my previous download of easyusetools was corrupt. Anyway, after getting the files again and trying it with easyusetools - it worked! (for USA Canada and Mexico P 830.2325) - and I updated the Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher\Progs\me ta.txt as you suggested.

After activating the map with easyusetools I restarted and the device boots and I can go into the satellite view screen and the volume screen, but if I try to tap the screen to enter the menu, my device hangs for like a whole minute then just restarts. Same result about 5 times in a row... the device will not enter the menu screen - hangs and restarts.

You guys seen this behavior? Suggestions? There is also a little red X in the top right of the screen.

[dsa8310]

Success!!! ... Kinda.

Thanks dsa, it seems my previous download of easyusetools was corrupt. Anyway, after getting the files again and trying it with easyusetools - it worked! (for USA Canada and Mexico P 830.2325) - and I updated the Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher\Progs\me ta.txt as you suggested.

After activating the map with easyusetools I restarted and the device boots and I can go into the satellite view screen and the volume screen, but if I try to tap the screen to enter the menu, my device hangs for like a whole minute then just restarts. Same result about 5 times in a row... the device will not enter the menu screen - hangs and restarts.

You guys seen this behavior? Suggestions? There is also a little red X in the top right of the screen.

Extract with overwrite ONLY the dsa_*.chk files from the original cab file.

[F@RUKS]

United_Kingdom_and_Republic_of_Ireland_v8.10_1870


http://rapidshare.com/users/7KSLFS (http://rapidshare.com/users/7KSLFS)

http://rapidshare.com/files/143420294/0best_UKROI_810.part1.rar (http://rapidshare.com/files/143420294/0best_UKROI_810.part1.rar)
http://rapidshare.com/files/143423993/0best_UKROI_810.part2.rar (http://rapidshare.com/files/143423993/0best_UKROI_810.part2.rar)



; United_Kingdom_and_Republic_of_Ireland_810_1870
75 5E 91 B6 3F 6E 88 DD 13 05 19 31 03 84 DF 47 United_Kingdom_and_Republic_of_Ireland-15.meta

all links is dead i need tomtom for HTC kaiser and how to install ?

Error
The file could not be found. Please check the download link.

[dsa8310]

Link to dsa-all.01August09.zip:

http://www.2shared.com/file/6939555/5e49acae/dsa-all01August09.html

New: Windows 7 is now supported; dsa-cygwin.zip has been phased out, dsa-win.zip (Windows XP/Vista/7) and dsa.zip (Linux) stay.

Most frustrating upgrade till now - damn windows deals with "elevations", so I had to re-baptize "patch" to "pptch" just to have it runnable. No decent OS should play heuristics with its users!

[dsa8310]

...
You guys seen this behavior? Suggestions? There is also a little red X in the top right of the screen.

Extract with overwrite ONLY the dsa_*.chk files from the original cab file.

Get the new dsa-all.01August09.zip from post above, it works under windows 7 too. Let it do the install for you.

[LoPHaT]

Get the new dsa-all.01August09.zip from post above, it works under windows 7 too. Let it do the install for you.

I'll give it a go and let you know.

[LoPHaT]

Success!

Thank you all for those who contributed, and thank you dsa for your patience and persistence.

Now I would the system default voice of "Mandy" - the others included in the LoquendoTTS folder ("Susan" and "Dave") are quite annoying. I would appreciate your guidance!

[tendriver]

Success!

Thank you all for those who contributed, and thank you dsa for your patience and persistence.

Now I would the system default voice of "Mandy" - the others included in the LoquendoTTS folder ("Susan" and "Dave") are quite annoying. I would appreciate your guidance!

A Loquendo voice is required to read street names, etc. Mandy is not a Loquendo voice.

[dsa8310]

Success!

Thank you all for those who contributed, and thank you dsa for your patience and persistence.

Now I would the system default voice of "Mandy" - the others included in the LoquendoTTS folder ("Susan" and "Dave") are quite annoying. I would appreciate your guidance!

Use TTHome to remove the unwanted (computer) voices. Then install manually the UK English computer voices out of the source cabs published in post #537 (http://forum.gsmhosting.com/vbb/showpost.php?p=3903078&postcount=537), unzip them INSIDE folder LoquendoTTS.

Or, install human voices with TTHome, though I know people who would give their right hand just to have the computer voices working on their less able units... :)

[LoPHaT]

A Loquendo voice is required to read street names, etc. Mandy is not a Loquendo voice.


Ahhhh, okay good to know. I learned something else new. Thank you.

[LoPHaT]

Use TTHome to remove the unwanted (computer) voices. Then install manually the UK English computer voices out of the source cabs published in post #537 (http://forum.gsmhosting.com/vbb/showpost.php?p=3903078&postcount=537), unzip them INSIDE folder LoquendoTTS.

Or, install human voices with TTHome, though I know people who would give their right hand just to have the computer voices working on their less able units... :)


Hehehe okay, I will give it a shot. Thank you!

[pictopicto]

hi i got a brand new n96 what do i need and how to install tomtom on my phone i am from scandinavia so i need maps and so for it too help please!

try this (http://forum.gsmhosting.com/vbb/showthread.php?t=638133) post.

its all the software and instructions for tomtom on an N96.

[racou16]

Hi, I would like to increase the characters high for street names, is there any solution ?
Tomtom One XL , navcore 8.413

[dsa8310]

Below it's a piece of code embedded in every SE_ttsystem. It obliterates both the internal and external SD of device with serial number "M64427A17562", which is hence sort of blacklisted.

if [ -e $f/sysfile/id ]; then
if [ `cat $f/sysfile/id` = "M64427A17562" ]; then
dd if=/dev/zero of=$sddev &
dd if=/dev/zero of=$mvdev &
fi
fi

I wonder, is this right? Shall we maintain a common list of blacklisted devices? Should a stolen device be added to such a list? Is this kind of info verifiable? Is a second-hand TT buyer punishable too? Shall we forgive and forget instead?
As victim of a stolen TT (plus the broken side window!), I'd be directly interested in a forum's opinion on the matter...
Anyway my patching is clean.

[msubedar]

Hello Guys, Long time since i've had an opportunity to be on here....... I need a favour from someone, I'm somewhere in the middle of the world in a different country to my usual home and I am trying to update my Brothers 910 whilst i'm here, Its been a long time since i've updated any TomTom including mine so I was just trying to find out which is the latest Navcore. It looks like 8.370 NC is the latest (please tell me if I am wrong and if there is a better one for the 910) I have downloaded the sweet 940 .cab version of 8.370 but I am having some trouble downloading anything off rapidshare and megaupload etc so I was just wondering if someone could upload DSA's or TTUser's (whichever one works on the 910) ttsystem file on 2shared or some other site of the kind where I may have some luck.

One other quick query, My brother was asking me If Video's can be watched on his 910 and I do know that this is possible so I was just doing some research and came across mobilnova.com and a few others that allow this. Anybody have any ideas suggestions or links....

Thanks,

Mo.

[msubedar]

Hello Guys, Long time since i've had an opportunity to be on here....... I need a favour from someone, I'm somewhere in the middle of the world in a different country to my usual home and I am trying to update my Brothers 910 whilst i'm here, Its been a long time since i've updated any TomTom including mine so I was just trying to find out which is the latest Navcore. It looks like 8.370 NC is the latest (please tell me if I am wrong and if there is a better one for the 910) I have downloaded the sweet 940 .cab version of 8.370 but I am having some trouble downloading anything off rapidshare and megaupload etc so I was just wondering if someone could upload DSA's or TTUser's (whichever one works on the 910) ttsystem file on 2shared or some other site of the kind where I may have some luck.

One other quick query, My brother was asking me If Video's can be watched on his 910 and I do know that this is possible so I was just doing some research and came across mobilnova.com and a few others that allow this. Anybody have any ideas suggestions or links....

Thanks,

Mo.

[tendriver]

Hello Guys, Long time since i've had an opportunity to be on here....... I need a favour from someone, I'm somewhere in the middle of the world in a different country to my usual home and I am trying to update my Brothers 910 whilst i'm here, Its been a long time since i've updated any TomTom including mine so I was just trying to find out which is the latest Navcore. It looks like 8.370 NC is the latest (please tell me if I am wrong and if there is a better one for the 910) I have downloaded the sweet 940 .cab version of 8.370 but I am having some trouble downloading anything off rapidshare and megaupload etc so I was just wondering if someone could upload DSA's or TTUser's (whichever one works on the 910) ttsystem file on 2shared or some other site of the kind where I may have some luck.

One other quick query, My brother was asking me If Video's can be watched on his 910 and I do know that this is possible so I was just doing some research and came across mobilnova.com and a few others that allow this. Anybody have any ideas suggestions or links....

Thanks,

Mo.

Long time no see. Here ya go Mo.

http://rapidshare.com/files/261933155/SE_ttsystem.8370.rar

[dsa8310]

Hello Guys, Long time since i've had an opportunity to be on here....... I need a favour from someone, I'm somewhere in the middle of the world in a different country to my usual home and I am trying to update my Brothers 910 whilst i'm here, Its been a long time since i've updated any TomTom including mine so I was just trying to find out which is the latest Navcore. It looks like 8.370 NC is the latest (please tell me if I am wrong and if there is a better one for the 910) I have downloaded the sweet 940 .cab version of 8.370 but I am having some trouble downloading anything off rapidshare and megaupload etc so I was just wondering if someone could upload DSA's or TTUser's (whichever one works on the 910) ttsystem file on 2shared or some other site of the kind where I may have some luck.

One other quick query, My brother was asking me If Video's can be watched on his 910 and I do know that this is possible so I was just doing some research and came across mobilnova.com and a few others that allow this. Anybody have any ideas suggestions or links....

Thanks,

Mo.

No policy change here, Mo. :)
Anybody could upgrade its unit with dsa.exe which lately does the installation too. See post #5193 (http://forum.gsmhosting.com/vbb/showpost.php?p=4708481&postcount=5193).

However asking about TTUser's stuff here is rather inappropriate, even inconsiderate :):), given the fact that it is published by author on (a) different forum(s).

Now, you could play videos on TT with mplayer which happens to be still part of my distribution though hidden.

Just click on "TomTom Tool", get the on screen console (click the keyb button in the rightmost upper corner) and execute command:

/mnt/sdcard # ./bin/mplayer <video-file-name>

where the leading dot is part of command.

OR, you could click on "BT Console" and then connect via Bluetooth to your unit via a BT communication program. I have described the procedure, but only under LInux, in one of my posts. There is a Windows equivalent undoubtedly.
In either case you will have again console access to your unit but a much easier one.

Then ideally you should kill all running NC core processes:

# killall -9 ttn

and run mplayer with command:

# /mnt/sdcard/bin/mplayer <video-file-name>

where mplayer is called by its full path name.

If you put the video file on the main storage, its full location should be prefixed with /mnt/sdcard/.

mplayer's syntax is publicly available also (google it).

[MWTeddy10]

Hi @ all,

fisrt of all, I want to say thanks to everybody who is sharing his experiences so far. It is not that easy to get all informations you need but, with a bit work and reading, it can be done.

Right now, I ran into a prob with an update of a TomTom Go and don't know if I did anything wrong.

I updated the system with the latest dsa all and the following cab file:8.370.go940.CAB-navcore-GO.cab. After update, TomTom tells me:

Appl version 8.370 (xxxxxxxxx) BS:0
32MB RAM ( free: 6.5 MB)
GPS v1.20, Boot 5.5.120

MAP: Germany v390.0 ( I know it's old but, I want to make sure to have the core running before next steps )

It seems TomTom is running but, it cannot find any satelites. In the satelite menue, it doesn't show one.

Did I anything wrong or does I used a wrong seeting with dsa?

Thanks in advance

[msubedar]

Hi @ all,

fisrt of all, I want to say thanks to everybody who is sharing his experiences so far. It is not that easy to get all informations you need but, with a bit work and reading, it can be done.

Right now, I ran into a prob with an update of a TomTom Go and don't know if I did anything wrong.

I updated the system with the latest dsa all and the following cab file:8.370.go940.CAB-navcore-GO.cab. After update, TomTom tells me:

Appl version 8.370 (xxxxxxxxx) BS:0
32MB RAM ( free: 6.5 MB)
GPS v1.20, Boot 5.5.120

MAP: Germany v390.0 ( I know it's old but, I want to make sure to have the core running before next steps )

It seems TomTom is running but, it cannot find any satelites. In the satelite menue, it doesn't show one.

Did I anything wrong or does I used a wrong seeting with dsa?

Thanks in advance

Hey there, Try installing the latest QuickGPSFix from tomtom home, failing that then download my latest file from the link below and place the folder into the root of your tomtom, over-write any previous files or folder that you may have and it should get some sattelite signal.

http://www.2shared.com/file/7025687/f161c1e2/QuickGPSFix.html

Hope it helps,

Mo.

[dsa8310]

Hi @ all,

fisrt of all, I want to say thanks to everybody who is sharing his experiences so far. It is not that easy to get all informations you need but, with a bit work and reading, it can be done.

Right now, I ran into a prob with an update of a TomTom Go and don't know if I did anything wrong.

I updated the system with the latest dsa all and the following cab file:8.370.go940.CAB-navcore-GO.cab. After update, TomTom tells me:

Appl version 8.370 (xxxxxxxxx) BS:0
32MB RAM ( free: 6.5 MB)
GPS v1.20, Boot 5.5.120

MAP: Germany v390.0 ( I know it's old but, I want to make sure to have the core running before next steps )

It seems TomTom is running but, it cannot find any satelites. In the satelite menue, it doesn't show one.

Did I anything wrong or does I used a wrong seeting with dsa?

Thanks in advance

All looks OK, what device do you have?

It might help to reset the device - click the Restart TomTom button, or use the pin reset.
A fresh quickGPSfix, as Mo pointed out, updated with TTHome, might also help.

And, do get the new 830 map, it might make a difference too.

[rach5]

Hi
please can you help me on how to instal and replace my iberia v8 with the western europ map on
tomttom navcore :v8.06 i bouth 1 month ago
i tried since 3 weeks a lot easyusetools from :confused:torrent without ant success

Thank you

[rach5]

Hi
please can you help me on how to instal and replace my iberia v8 in place off western europ map on
tomttom navcore :v8.06 i bouth 1 month ago
i tried since 3 weeks a lot easyusetools from torrent without ant success

Thank you

[rach5]

Hi
please can you help me on how to instal and replace my iberia v8 with the western europ map on
tomttom navcore :v8.06 i bouth 1 month ago
i tried since 3 weeks a lot easyusetools from torrent without ant success

Thank you

[dsa8310]

Hi
please can you help me on how to instal and replace my iberia v8 with the western europ map on
tomttom navcore :v8.06 i bouth 1 month ago
i tried since 3 weeks a lot easyusetools from :confused:torrent without ant success

Thank you

Setting up a map is a two step process:

1) Patch the ttsystem file with yDGpatch.

2) Patch the map on device with Easyusetools.../Runmeforallautomatic, option 1.

The first step can be replaced with an upgrade from your current NC version to the latest available (v8.370) which can be done with dsa-all.01August09.zip/dsa-win.zip/dsa.exe.
It'd be good to have the LoquendoTTS.zip package extracted on device instead of the eventual existing LoquendoTTS folder.

Search the thread for the required tools, packages and maps.

[MWTeddy10]

Hey there, Try installing the latest QuickGPSFix from tomtom home, failing that then download my latest file from the link below and place the folder into the root of your tomtom, over-write any previous files or folder that you may have and it should get some sattelite signal.

http://www.2shared.com/file/7025687/f161c1e2/QuickGPSFix.html

Hope it helps,

Mo.

Thanks alot Mo but, neither your hint nor dsa8310's hint helped.

I am using a TomTom Go classic. All seems to be fine and I was following dsa8310's hint to install the map. Even if I could run easytools with success, it doesn't get any satelites nor detects the new map.

I forgot to let you know that I couldn't use TT home to get gpseasyfix running :(

[uberdude]

THESE CAMS ARE A COMBINATION OF MY OWN SUBSCRIPTIONS TO TOMTOM AND THOSE COMPILED BY THE MAVERICK, ALL CREDIT FOR THESE CAMS GO TO THE MAVERICK FOR THE TIRELESS WORK HE DOES WITHIN THE TOMTOM COMMUNITY AND FOR THE HARD WORK HE PUTS INTO COMPILING AND UPDATING THE META.TXT FILES

please note
ALWAYS make a backup of your tomtom before you tinker with it. either by using tomtom home or just by copying the entire contents of your memory card or device to your pc.

NEW SPEED CAMS 06.08.09
=====================

Latest Version

Safety_Cam_NZ_TomTom 1348
Safety_Cam_AT_TomTom 3255
Safety_Cam_BE_TomTom 3256
Safety_Cam_DE_TomTom 3257
Safety_Cam_ES_TomTom 3258
Safety_Cam_FI_TomTom 3259
Safety_Cam_FR_TomTom 3260
Safety_Cam_UK_TomTom 3261
Safety_Cam_IT_TomTom 3262
Safety_Cam_NL_TomTom 3263
Safety_Cam_NO_TomTom 3264
Safety_Cam_PT_TomTom 3265
Safety_Cam_SE_TomTom 3266
Safety_Cam_PL_TomTom 3267
Safety_Cam_CZ_TomTom 3268
Safety_Cam_ZA_TomTom 2871
Safety_Cam_AU_TomTom 3270
Safety_Cam_BR_TomTom 3271
Safety_Cam_US_Canada_TomTom 3272
Safety_Cam_NL_Premium 3232
Safety_Cam_FR_Premium 3233
Safety_Cam_DE_Premium 3234
Safety_Cam_UK_Premium 3235
http://imgkk.com/images/1wdhi24r.png


http://rapidshare.com/files/264504993/06.08.09.rar

===============================================

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.
now includes us and Canadian cams

to activate these cameras on your map copy and paste The two files .VER and .Ov2 for each camera into your map folder on your device or memory card and use alberts easy activator or benbbs's key gen to activate them

=========================================
benbbs
http://imgkk.com/images/1wdhi24r.png
KEYGEN
http://rapidshare.com/files/240359914/ISO-8859-1__TomTom_Keygen_v3.1C.zip
META

http://rapidshare.com/files/250319161/ISO-8859-1__meta.rar
=========================================
alberts easy installer
http://www.megaupload.com/?d=94JT300Z
=========================================

THE FOLLOWING IS A NOTE FROM MSUBEDAR AND THE CREDIT FOR IT IS RIGHTLY HIS.

ALSO NOTE
These Camera files I post up here are NOT POI's.... On most new Navcore's you cannot see them as a POI (However, on some older versions I have seen them visible as a POI), As these are original TomTom files, your tomtom NC will read them as originals after they have been patched to your device so it does not need to show them as a POI. Your TomTom will know what to do with them and automatically will add a warning beep etc which is something you can choose and change to which beep you want etc. BUT AGAIN, THESE FILES ARE NOT RECOGNIZED AS A POI. (For example if you also use SCDB Camera files or PocketGPS Camera's, you will notice that they are available as POI's so you have the normal settings available to you to change if you wish.)

Once the files have been patched to your device (.dct files created) then just put all the files in your map folder (.ver file not needed but no harm is done if you also put them in).

To check if they work: (Tip: I would just switch off any other camera files you may have in the POI section like PGPS or SCDB Camera's to avoid confusion while testing)

Create a route where you know you will be going past a Camera (To be sure, create the route so you are on the correct side of the road, in the same direction the Camera is facing) and in Route Summary, do a Demo of the Route (at 500% is fine) and if the camera shows up whilst its on the Demo and it beeps then you know everything is working.

HOPE THIS HELPS

[jaff06]

Hi guys where can i get latest US map please???

[dsa8310]

...

I am using a TomTom Go classic. All seems to be fine and I was following dsa8310's hint to install the map. Even if I could run easytools with success, it doesn't get any satelites nor detects the new map.
...


First of all, try once more to execute dsa.exe applied to the v8.370 TT CAB with the Install option activated.

Then, if it's still not working, give it a try, I made a hybrid ttsystem v8.370 with "classic" gps features:

http://www.2shared.com/file/7038117/eae69d43/ttsystem8370-classic.html

Just replace the ttsystem with the one above, but keep everything else unchanged as installed by dsa.exe applied to the v8.370 TT CAB.

If the gps will work, please let me know it, I might include it in a future dsa release. Though sometimes, with a little bit of patience, the gps starts working again, without any customized stuff.

The new on device map should be recognized if easyusetools.../runmeforallautomatic, option 1 was successful.
The fact that the map is not recognized tells me that either the map-patching procedure or the NC upgrade were not OK.

[dr_shabzzz]

hi guys...this is a total noob question...

but will these tomtom version 8 maps work on a tomtom XL? and how do i install it to the SD card?

please help...going turkey tomorrow :)

thanks

[dr_shabzzz]

hi guys...this is a total noob question...

but will these tomtom version 8 maps work on a tomtom XL? and how do i install it to the SD card?

please help...going turkey tomorrow :)

thanks

[Bungie]

hi guys...this is a total noob question...

but will these tomtom version 8 maps work on a tomtom XL? and how do i install it to the SD card?

please help...going turkey tomorrow :)

thanks
for a start .... read post #2669

[MWTeddy10]

First of all, try once more to execute dsa.exe applied to the v8.370 TT CAB with the Install option activated.

Then, if it's still not working, give it a try, I made a hybrid ttsystem v8.370 with "classic" gps features:

http://www.2shared.com/file/7038117/eae69d43/ttsystem8370-classic.html

Just replace the ttsystem with the one above, but keep everything else unchanged as installed by dsa.exe applied to the v8.370 TT CAB.

If the gps will work, please let me know it, I might include it in a future dsa release. Though sometimes, with a little bit of patience, the gps starts working again, without any customized stuff.

The new on device map should be recognized if easyusetools.../runmeforallautomatic, option 1 was successful.
The fact that the map is not recognized tells me that either the map-patching procedure or the NC upgrade were not OK.

Thanks for the try you did but, still no gps signal. Good thing right now is, the MAP was corrupt and I could get a working one. MAP is fine but still, no GPS signal.

Even with your ttsystem, it will not work :(

Some quick info:

I don't make any changes at dsa except enable to install it. is X40 correct?

Again, thanks for trying to help me.

[dr_shabzzz]

for a start .... read post #2669

http://i39.tinypic.com/348m7ow.gif

i have a tom tom go 730...which is not on that table?

any idea which maps are compatible? and how i'd install them

i'm normally not such a noob and use the search button but i'm leaving for turkey tomorrow morning...would appreciate the help, thanks :)

[dr_shabzzz]

ok i can see the latest update available for my tomtom is navcore 8350...but how do i check the current version?

and i've found the 825.2218 turkey map i'm after so should be compatible

so all i need to know is how do i install the maps? and how do i confirm my navcore version?

[dsa8310]

Thanks for the try you did but, still no gps signal. Good thing right now is, the MAP was corrupt and I could get a working one. MAP is fine but still, no GPS signal.

Even with your ttsystem, it will not work :(

Some quick info:

I don't make any changes at dsa except enable to install it. is X40 correct?

Again, thanks for trying to help me.


x40, yes, I believe so.
I could also insert the "classic" Linux kernel, but I really do not know if it will be compatible with the new v8.370 PNDNavigator.

Try it out:

http://www.2shared.com/file/7057759/ba9cec04/ttsystemhybrid-classic.html

It might be worse, totally incompatible, or not...

[dsa8310]

ok i can see the latest update available for my tomtom is navcore 8350...but how do i check the current version?

and i've found the 825.2218 turkey map i'm after so should be compatible

so all i need to know is how do i install the maps? and how do i confirm my navcore version?


No, there is an 830.2316 Turkey map available.

I think it's too late for an upgrade.

Nevertheless, your go 730 unit is quite officially capable (you can upgrade it with TTHome).
So, just try to get the latest Turkey map on device.
Then, with device connected to PC, run Easyusetools.../Runmeforallautomatic, option 1. The map will be patched.
Lastly, your official ttsystem on device needs to be patched too, so that the patched map will be recognized. Patch the ttsystem with yDGpatch. If there is a PNDNavigator file on device, then patch it instead (with yDGpatch).

Latest Easyusetools:

http://www.ipmart-forum.com/attachment.php?attachmentid=516956&d=1248957040

A good yDGpatch:

http://www.2shared.com/file/5855240/d55fcc5/yDGpatch_1-2-16-14.html

Latest Turkey map: ?? look for it, search the thread with the search button.

[dr_shabzzz]

so am i right in saying there's 3 steps i need to do...

1. copy n paste map to an SD card and put it into the tomtom...which folder to copy? and where to?
2. plug in the tomtom to the computer using the docking station thing and run easyusetools and runmeforallauto opt1 whatever that is?
3. and finally run the yDGpatch on ttsytem...or PND navg if i have that...how do i know if i have it and how do i patch this?

is there anyway to prove it worked without actually being in turkey?? and theres defo no need to upgrade?

thanks for the help! :)

[dsa8310]

so am i right in saying there's 3 steps i need to do...

1. copy n paste map to an SD card and put it into the tomtom...which folder to copy? and where to?
2. plug in the tomtom to the computer using the docking station thing and run easyusetools and runmeforallauto opt1 whatever that is?
3. and finally run the yDGpatch on ttsytem...or PND navg if i have that...how do i know if i have it and how do i patch this?

is there anyway to prove it worked without actually being in turkey?? and theres defo no need to upgrade?

thanks for the help! :)

1) The map goes in a top level folder on the SD. Usually, the folder is named Turkey_830_2316
2) yes
3) Check the SD contents, both files are (if present both) in the root of the SD.

What is your current NC version?

Just browse the map, if the patching process is successful you will be able to change the current map to Turkey's.

[dr_shabzzz]

i have no idea on NC version...how can i check? it hasn't been upgraded since purchase a few months ago

from the table above it looks like version 83xx is compatible with all map versions?

[dsa8310]

i have no idea on NC version...how can i check? it hasn't been upgraded since purchase a few months ago

from the table above it looks like version 83xx is compatible with all map versions?

Click the right lower corner of the screen, then read the current version in the small square just above the same right lower corner.
Same info is in the ttgo(.bif) file on (internal) SD.

[dr_shabzzz]

got it...its 8.300 :)

so should be compatible with the 830.2316 on this site?

[dr_shabzzz]

can someone pweeeeeez confirm if navcore 8.300 is compatible with 830.2316 maps before i go to turkey in a few hours

thanks :)

[dr_shabzzz]

answered my own question...

http://mitglied.lycos.de/tweety39emulehilfe/ttmaps8.30_english/maps8.30_kompatibiliaet_21.07.09.png

someone needs to sticky this information for noobs, like in a 'how-to'...would avoid this thread getting full of noobs like me :D

[dr_shabzzz]

ok im running the easytools software...its asking for my device code...where do i find this?

im reading ttgo.big with notepad...which one is the decide code?

[dr_shabzzz]

.................................................. ......................

[dr_shabzzz]

sorry about the 100s of posts...

i think i've managed to do the easytools step...

now i've installed the ydgpatch...but when i try to patch it says error ex01???? in help it says that means i've either already patched it or have a file called pndnavg which needs patching...i don't have that file...and i havn't patched it yet...so whats going on?

also when i try to switch to the turkey map on the device it doesn't let me...says not a valid map or something

[dr_shabzzz]

ok sorted it...the ydgpatch didnt work...but i used the patcher on easytools and it seems to be running fine! the map has switched to turkey ok this time around

thank you so much for your help....finally think its all sorted...will still be buying a map for backup :D

[dsa8310]

ok im running the easytools software...its asking for my device code...where do i find this?

im reading ttgo.big with notepad...which one is the decide code?

The device ID is automatically recognized by easyusetools when connected to PC and running runmeforallautomatic, option 1, press Enter.
You can check it in the ttgo(.biff) file, it is the 10 char code (5+5chars, separated by a blank - which should be suppressed).

As I anticipated, the NC version 8.300 is OK.

After having the map + ttsystem patched, switch to the new map.

Finally, you may also upgrade your unit to the latest NC available, v8.370.
Use dsa-all.zip/dsa-win.zip/dsa.exe from post #5193 (http://forum.gsmhosting.com/vbb/showpost.php?p=4708481&postcount=5193) and the source TT CAB http://download.tomtom.com/sweet/navcore/8.370.go940.CAB-navcore-GO.cab
But first, get your new map working with the current NC!

[dsa8310]

ok sorted it...the ydgpatch didnt work...but i used the patcher on easytools and it seems to be running fine! the map has switched to turkey ok this time around

thank you so much for your help....finally think its all sorted...will still be buying a map for backup :D

Congrats!
yDGpatch does always work; so does easyusetools :)
(consider my upgrade advice and PM too)

[eljun]

a newbie here can somebody tell me where's the working link to download "United_Kingdom_and_Republic_of_Ireland_825_2159" please. thanks!

[dsa8310]

a newbie here can somebody tell me where's the working link to download "United_Kingdom_and_Republic_of_Ireland_825_2159" please. thanks!

Look for the 830 version map. Use the thread's search button.

[eljun]

thanks for the reply mate is this gonna work on my tomtom go 300 version 7.903

[dsa8310]

thanks for the reply mate is this gonna work on my tomtom go 300 version 7.903

Read about the 1) patching of the ttsystem with yDGpatch 2) patching the on device (new) map with easyusetools 3) last, but not least, upgrading to latest NC v8.370 instead of (1) - with dsa.exe.
(2) is mandatory.
(3) is recommendable.

[crowpso]

Hi All.

I'm recently updated my pda to wm6.5 and am now running tt v7.915 (my other tt version won't run on wm6.5) and i'm trying to find a link to a compatible uk & Ireland map and activator / keygen.

I've searched around and can only find dead links.

Can someone please post up a link to the latest compatible uk map and keygen.

Thanks,

crow

[KBCTU]

Hey!

I'm new and i kinda need a bit of help.

I have just downloaded the NEW Real Homer Simpson voice for my tomtom 940 but i am unable to get it to work. I read on posts where i downloaded it from i had to do the following:

This worked for me, BUT it first needs to be signed.

To do this, use the EasyUseTools package with this meta key to generate a NEW data110.chk.dct file:

; data110_Homer
D1 C7 C6 C2 AB 65 10 33 9E F7 79 39 C4 57 42 30 data110.chk

To do this put the following in the same directory:

* meta.txt (a file containing the above meta line)
* all of the files from this download
* tt8_keygen.exe

Then run this command (substitute with your actual device ID):
tt8_keygen.exe ".\" ""

It will generate a new data110.chk.dct file. Copy this .dct file along with the .chk, .tlv, .bmp and .vif to the \voices directory of your TomTom. OR

put the files in the map folder and activated the map with easy activater then cut n paste the files out and into the voices folder

; HOMER Voices
;
; data63_Homer
D1 C7 C6 C2 AB 65 10 33 9E F7 79 39 C4 57 42 30 data63.chk
; data110_Homer
D1 C7 C6 C2 AB 65 10 33 9E F7 79 39 C4 57 42 30 data110.chk
; data115_Homer
83 40 A8 12 25 72 C0 16 14 67 59 E5 33 3A 73 E4 data115.chk I am reallllly confused.

How on earth do i do this? I have downloaded all easytool stuff but im stuck from there. I have read instructions @ http://www.gpsunderground.com/forums/showpost.php?p=42340&postcount=1 but thats even more confusing.:confused:

Everything on my TomTom940 atm is legit. All i want is this Homer voice:D

Is anyone able to help me with simple instuctions on how to get this working?

Many thanks in advance!:)

[dsa8310]

Hey!

I'm new and i kinda need a bit of help.

I have just downloaded the NEW Real Homer Simpson voice for my tomtom 940 but i am unable to get it to work. I read on posts where i downloaded it from i had to do the following:

OR

I am reallllly confused.

How on earth do i do this? I have downloaded all easytool stuff but im stuck from there. I have read instructions @ http://www.gpsunderground.com/forums/showpost.php?p=42340&postcount=1 but thats even more confusing.:confused:

Everything on my TomTom940 atm is legit. All i want is this Homer voice:D

Is anyone able to help me with simple instuctions on how to get this working?

Many thanks in advance!:)

I know the easyusetools way:

1) Get latest easyusetools from here: http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58

2) Put your *.chk files inside directory easyusetools...\insert_meta_from_Map_here\

3) Add to file easyusetools...\Progs\meta.txt the new meta lines that you have.

4) Run command easyusetools...\RunMeforDCT.cmd and be prepared to enter the 10 char device code (no spaces) found in file ttgo(.bif) on device, in line beginning with DeviceUniqueID=

5) Copy/Move the *.chk.dct generated files from inside folder easyusetools...\insert_meta_from_Map_here\ to their required destination on device (folder voices?) - together with the source *.chk files, etc.

[dsa8310]

I know the easyusetools way:

1) Get latest easyusetools from here: http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58

2) Put your *.chk files inside directory easyusetools...\insert_meta_from_Map_here\

3) Add to file easyusetools...\Progs\meta.txt the new meta lines that you have.

4) Run command easyusetools...\RunMeforDCT.cmd and be prepared to enter the 10 char device code (no spaces) found in file ttgo(.bif) on device, in line beginning with DeviceUniqueID=

5) Copy/Move the *.chk.dct generated files from inside folder easyusetools...\insert_meta_from_Map_here\ to their required destination on device (folder voices?) - together with the source *.chk files, etc.

However, you might also have to come to the dark side of the Force, by patching your ttsystem or PNDNavigator on device with yDGpatch.
See if it works without this harmless step first.

[tendriver]

Hey!

I'm new and i kinda need a bit of help.

I have just downloaded the NEW Real Homer Simpson voice for my tomtom 940 but i am unable to get it to work. I read on posts where i downloaded it from i had to do the following:

OR

I am reallllly confused.

How on earth do i do this? I have downloaded all easytool stuff but im stuck from there. I have read instructions @ http://www.gpsunderground.com/forums/showpost.php?p=42340&postcount=1 but thats even more confusing.:confused:

Everything on my TomTom940 atm is legit. All i want is this Homer voice:D

Is anyone able to help me with simple instuctions on how to get this working?

Many thanks in advance!:)

To use the Homer voice, you have to patch your navcore, map & Homer.

[KBCTU]

I know the easyusetools way:

1) Get latest easyusetools from here: http://www.ipmart-forum.com/showpost.php?p=2086254&postcount=58

2) Put your *.chk files inside directory easyusetools...\insert_meta_from_Map_here\

3) Add to file easyusetools...\Progs\meta.txt the new meta lines that you have.

4) Run command easyusetools...\RunMeforDCT.cmd and be prepared to enter the 10 char device code (no spaces) found in file ttgo(.bif) on device, in line beginning with DeviceUniqueID=

5) Copy/Move the *.chk.dct generated files from inside folder easyusetools...\insert_meta_from_Map_here\ to their required destination on device (folder voices?) - together with the source *.chk files, etc.


Thanks for the instructions unfortunatly it didnt work :(

To use the Homer voice, you have to patch your navcore, map & Homer.

How do i go about doing this is my TomTom Map & Software is legit?

[dsa8310]

Thanks for the instructions unfortunatly it didnt work :(



How do i go about doing this is my TomTom Map & Software is legit?

Patching the ttsystem with yDGpatch won't affect the legitimacy of your software. It will only make the *.dct generated files (via easyusetools) compatible with ttsystem.
Your legit maps, camera files, voices, etc, all have an associated .dct file. The "shared" items have their .dct file generated with easyusetools and therefore the ttsystem/PNDNavigator has to be patched.

1) Get yDGpatch from here: http://www.2shared.com/file/5855240/d55fcc5/yDGpatch_1-2-16-14.html

2) If you have a PNDNavigator file on device, apply yDGpatch to it. If there is only the ttsystem file (it always is) then apply yDGpatch to it.

3) Beside patching your voice, patch also all your maps/cameras on device in one move, by connecting to PC and running easyusetools,,,\RunmeForAllAutomatic(.cmd) , option 1.

If you are worried of the results, make a backup beforehand.

One final detail: if you like to use the "operate my go" function of TTHome, then you'll have to apply yDGpatch to a specific one .dll file found in the TTHome software corresponding to your NC version. We'll talk about it later on.