TomTom v8 Firmware and Maps

[tendriver]

How did you get it working? All the info to install it is contained in these threads. Presumably you read them more thoroughly than you did the first time?
Look in your TomTom for a folder called, "ephem". Read the text file inside called, "ee_meta" . It will say something like, Expiry= xxxxxxxxx where x equals numerals. Copy these numerals into the box HERE (http://www.onlineconversion.com/unix_time.htm)
It will tell you when the GPSFix expires. If it is less than a week, HOME may not give you an update.
They are limiting the updates from time to time when their servers are busy.

You can try deleting the files in ephem ( save them somewhere first) and see if HOME will give you an update then.

Thanx. Any reason you can't use this same site to create a NEW Unix timestamp and replace the expiring one in the ee_meta file?

[tendriver]

I've seen a couple of guys claiming that they have Loquendo working with One vs and 8.204 but on further questioning they admit it is VocalizerTTS.
You know from asking yourself in another place that no one has given an answer about HOW they got it working. If they have managed to fix something others have not they would be posting about it all over the place.TTUser has not posted a fix for it either. Enough said.


I will have to agree with you on this.

[tendriver]

This is my first post want to say i have read alot of this and not sure what map and navcore i need would like the latest maps of north america if some one would direct me to the right one that would be great. I have app 7.903 9183 map usa and canada v665.1293. THANKS NORML420

You failed to mention what device you have.

[norml420]

Here is all of what it says App 7.903 (9183/81205) os: 2344 Gps v1.21, Boot 4.8600 Map USA_AND_CANADA v665.1293. Thanks for the reply. TomTom 510

[msubedar]

Hi there, I have got a query, i have got my brothers TT300 here which is still running the original V6 NC & UK & Ire Map. I wanted to know which New NC and Map is stable for the TT300. On my TT520 i am successfully using a patched Navcore V8.32 and UK & IRE Map V815.2003. I copied all my files from my 520 and put it onto another memory card and patched the map to the TT300, when you enter the new card and switch it on it all works fine untill your normal screen comes up where it shows you recent place (the map screen) when you tap the map it just sort of freezes and will restart after a few seconds and will work fine again till the map screen. If you tap the bottom right of the TT300 screen that all works fine because it says that it is running NC V8.320 and Map V815.2003. Any suggesstions?

Thanks again, Mo

[Chris56000]

Hi!

After reformatting the SD card, using TT's Clear Flash Tool, then recopying johnnyboy147's card dump and finally applying the KG on v8.15.2003 UK/ROI maps everything's come on fine with IQ/ALG, but I'm still not sure how to enable the Safety Cameras!

As I'm using UK/ROI maps only can I use the UK .ov2 & ver files only from the 18-12-08 download?

Where on the TomTom do I need to copy 'em & how do I enable 'em?

Many thanks,

Chris Williams

[msubedar]

Hi!

After reformatting the SD card, using TT's Clear Flash Tool, then recopying johnnyboy147's card dump and finally applying the KG on v8.15.2003 UK/ROI maps everything's come on fine with IQ/ALG, but I'm still not sure how to enable the Safety Cameras!

As I'm using UK/ROI maps only can I use the UK .ov2 & ver files only from the 18-12-08 download?

Where on the TomTom do I need to copy 'em & how do I enable 'em?

Many thanks,

Chris Williams


Using the easyusetool which can be found on one of the earlier threads if you have not alrady got it, copy from the map folder 2 files which will be for example mine are "United_Kingdom_and_Republic_of_Ireland-19.meta" & the "United_Kingdom_and_Republic_of_Ireland.pna" so basically the .pna file and the .meta file, be sure not to copy the .meta.dct file as then it will not work. Then place these 2 files into the folder where all the camera files are, (I just updated the ones you are trying to update and it worked fine). Then click on the RunMeforDCT icon in the easytools folder and follow the instuctions, make sure you choose the option which says files from "insert_meta_from_Map_here" and the correct one for you Navcore version. Then you are done, this will then create some new camera files in the camera folder, copy all the files in the camera folder except the 2 .meta and the .pna file and paste all the files directly into you Map folder and it should now work. Hope it all goes well,

Mo

[nashp]

Hi there Im Running Tomtom Firmware 7.903 on my TomTom One V.1 [Downloaded Via Tomtom Home] i just downloaded the Uk Map 8.15.2024 im using the "TomTom KeyGen v2.5 (v6-7-8) [06-12-2008]" downloaded from the first page but it doesnt activate the map. is there anything im doing wrong? it keeps on asking me for Patched TTsystem im trying to patch it but the software doesnt support it. im confused.

any help please??
thanx

[msubedar]

Hi there Im Running Tomtom Firmware 7.903 on my TomTom One V.1 [Downloaded Via Tomtom Home] i just downloaded the Uk Map 8.15.2024 im using the "TomTom KeyGen v2.5 (v6-7-8) [06-12-2008]" downloaded from the first page but it doesnt activate the map. is there anything im doing wrong? it keeps on asking me for Patched TTsystem im trying to patch it but the software doesnt support it. im confused.

any help please??
thanx

Hi, first of all you cannot run a V8 Map on a V7 Navcore (firmware) and any features like Lane Guidance or IQR will not work. There are two ways of getting the new Navcore, either see if TT HOME will let you update it to a version 8 firmware (latest one is the V8.320) and then simply download the patched files on some of the earlier threads making sure that it is for the same Version that Home is giving you. Then replace the patched ttsystem file on to the root of your newly downloaded firmware. In the patched download you will find 4 folders, one of them will contain the patched ttsystem file and another folder will be called for example "SE_ttsystem.8320.9901", inside this folder you will need to copy and paste 2 files which are the "Outsourced.8320" and the unextracted "switchfiles" file into the root of your tomtom and overright the files.
IF TomTom Home is not giving you an upgrade to a new firmware then you can find the latest one on here a few pages back (V8.320). If you download this then just follow the steps earlier and you should be fine, One other thing, I am not sure on the TT One's but the map you have got V815.2024 is not very good as you do not get the Lane Guidance and the full IQR, the more stable map is the UK & IRE V815.2003, Hope this helps, Also the new Camera's are also available a couple of pages away. Hope all goes well.

Mo

[rytenuff]

Hi there Im Running Tomtom Firmware 7.903 on my TomTom One V.1 [Downloaded Via Tomtom Home] i just downloaded the Uk Map 8.15.2024 im using the "TomTom KeyGen v2.5 (v6-7-8) [06-12-2008]" downloaded from the first page but it doesnt activate the map. is there anything im doing wrong? it keeps on asking me for Patched TTsystem im trying to patch it but the software doesnt support it. im confused.

any help please??
thanx


You need to read more of the thread than the first page. The information you need hs been posted in here many many times.

[russ9898]

Hi,

I would just like to say thankyou to everyone who helped me out upgrading my TT go 510. (i have clicked the thanks button on links and advice i have used)

I now have v8 firmware and maps on my TT. I'm really enjoying receiving the mapshare updates, iq routes and lane guidance. I used my TT the other day when i went out with a friend and he was so impressed with the latest updates he asked me to try and upgrade his TT one, and sure enough ive managed to do it. Again thanks to this site and its users.

I will be sticking around and try and help any new users who hit the same hurdles that i did during my initial upgrades.

Thanks again,

Russ

[rytenuff]

Hi, first of all you cannot run a V8 Map on a V7 Navcore (firmware) and any features like Lane Guidance or IQR will not work. There are two ways of getting the new Navcore, either see if TT HOME will let you update it to a version 8 firmware (latest one is the V8.320) and then simply download the patched files on some of the earlier threads making sure that it is for the same Version that Home is giving you. Then replace the patched ttsystem file on to the root of your newly downloaded firmware. In the patched download you will find 4 folders, one of them will contain the patched ttsystem file and another folder will be called for example "SE_ttsystem.8320.9901", inside this folder you will need to copy and paste 2 files which are the "Outsourced.8320" and the unextracted "switchfiles" file into the root of your tomtom and overright the files.
IF TomTom Home is not giving you an upgrade to a new firmware then you can find the latest one on here a few pages back (V8.320). If you download this then just follow the steps earlier and you should be fine, One other thing, I am not sure on the TT One's but the map you have got V815.2024 is not very good as you do not get the Lane Guidance and the full IQR, the more stable map is the UK & IRE V815.2003, Hope this helps, Also the new Camera's are also available a couple of pages away. Hope all goes well.

Mo

Nav 7.9xx is really a cut down version of v8. It will read some v8 maps but not all. Look at the table posted by tendriver recently.

[rytenuff]

Thanx. Any reason you can't use this same site to create a NEW Unix timestamp and replace the expiring one in the ee_meta file?

The GPSFix is the positioning of the satellites for the period the fix is valid i.e. until the expiry date. Changing the date would not affect the positioning of the satellites.

[rytenuff]

Nav 7.9xx is really a cut down version of v8. It will read some v8 maps but not all. Look at the table posted by tendriver recently.

The table is here.
http://forum.gsmhosting.com/vbb/showpost.php?p=3951592&postcount=769

[msubedar]

Hi there, I have got a query, i have got my brothers TT300 here which is still running the original V6 NC & UK & Ire Map. I wanted to know which New NC and Map is stable for the TT300. On my TT520 i am successfully using a patched Navcore V8.32 and UK & IRE Map V815.2003. I copied all my files from my 520 and put it onto another memory card and patched the map to the TT300, when you enter the new card and switch it on it all works fine untill your normal screen comes up where it shows you recent place (the map screen) when you tap the map it just sort of freezes and will restart after a few seconds and will work fine again till the map screen. If you tap the bottom right of the TT300 screen that all works fine because it says that it is running NC V8.320 and Map V815.2003. Any suggesstions?

Thanks again, Mo

Any sugesstions on this anyone???

[tendriver]

The GPSFix is the positioning of the satellites for the period the fix is valid i.e. until the expiry date. Changing the date would not affect the positioning of the satellites.

Thanx. I misunderstood. I read your post as meaning that after the expiry date, GPSFix updates would no longer be received. I continue to learn.

[tendriver]

Hi there, I have got a query, i have got my brothers TT300 here which is still running the original V6 NC & UK & Ire Map. I wanted to know which New NC and Map is stable for the TT300. On my TT520 i am successfully using a patched Navcore V8.32 and UK & IRE Map V815.2003. I copied all my files from my 520 and put it onto another memory card and patched the map to the TT300, when you enter the new card and switch it on it all works fine untill your normal screen comes up where it shows you recent place (the map screen) when you tap the map it just sort of freezes and will restart after a few seconds and will work fine again till the map screen. If you tap the bottom right of the TT300 screen that all works fine because it says that it is running NC V8.320 and Map V815.2003. Any suggesstions?

Thanks again, Mo

Any sugesstions on this anyone???

Had it been I, I would not have copied files from one device into the other. I would have started fresh by putting the downloaded cracked NC 8.320 on the memory card, then creating a .dct with the downloaded 815.2003 map and putting the .dct file and downloaded map files on the card.

[msubedar]

Had it been I, I would not have copied files from one device into the other. I would have started fresh by putting the downloaded cracked NC 8.320 on the memory card, then creating a .dct with the downloaded 815.2003 map and putting the .dct file and downloaded map files on the card.

Same problem i am afraid, i can't think of what i am doing wrong, unless if it the navcore or the map???

[msubedar]

Whenever you switch it on it thinks it is in central london which i think is normal whenever you have a fresh map and untill it doesn't get a GPS Signal to your current location but the thing is that it is not picking up any GPS Signal so therfore whenever you try to tap into the menu screen it will just freeze and restart. Hope this helps!!!

[tendriver]

Same problem i am afraid, i can't think of what i am doing wrong, unless if it the navcore or the map???

Did you return the 300 to the setup it was in when you got it, before you tried the fresh update?

[msubedar]

Did you return the 300 to the setup it was in when you got it, before you tried the fresh update?

Sorry I didn't understand, I have still got the original SD Card which i have not done anything to, I am trying to add the new NC and Map on a fresh SD Card.

[tendriver]

Whenever you switch it on it thinks it is in central london which i think is normal whenever you have a fresh map and untill it doesn't get a GPS Signal to your current location but the thing is that it is not picking up any GPS Signal so therfore whenever you try to tap into the menu screen it will just freeze and restart. Hope this helps!!!

You aren't getting a GPS signal in any location?

[tendriver]

Did you return the 300 to the setup it was in when you got it, before you tried the fresh update?

Sorry I didn't understand, I have still got the original SD Card which i have not done anything to, I am trying to add the new NC and Map on a fresh SD Card.

OK, you answered my question. Do you get a GPS signal with the original SD card?

[msubedar]

OK, you answered my question. Do you get a GPS signal with the original SD card?

Yes, it all works fine with the original SD Card, it locates where i am and everything like normal.

[tendriver]

Yes, it all works fine with the original SD Card, it locates where i am and everything like normal.

What size SD card are you using for the update?

[msubedar]

What size SD card are you using for the update?

The original SD Card is a 128MB i think, I have got a 1GB one which i am trying to put the new NC and Map on.

[tendriver]

The original SD Card is a 128MB i think, I have got a 1GB one which i am trying to put the new NC and Map on.

Card size shouldn't be the problem then.

[msubedar]

Card size shouldn't be the problem then.

Ok, Basically what i am doing is: ON the fresh SD Card, I am transferring the new NC V8.320 files onto the Card, with the patched NC files (The one with 4 folders) I am copying from the "SE_ttsystem.8320.9901" folder the "Outsourced.8320" and the "switchfiles" files and over-writing these 2 files with the one's on the new SD Card. Then from the folder "ttsystem.8320.9901.mappatch" I am copying the ttsystem file and the data.chk and over-writing these 2 files with the one's on the new SD Card. Then I am getting the Map folder and copying it to the SD Card and then patching it. Can you notice anything wrong here???

Thanks,

Mo

[tendriver]

Ok, Basically what i am doing is: ON the fresh SD Card, I am transferring the new NC V8.320 files onto the Card, with the patched NC files (The one with 4 folders) I am copying from the "SE_ttsystem.8320.9901" folder the "Outsourced.8320" and the "switchfiles" files and over-writing these 2 files with the one's on the new SD Card. Then from the folder "ttsystem.8320.9901.mappatch" I am copying the ttsystem file and the data.chk and over-writing these 2 files with the one's on the new SD Card. Then I am getting the Map folder and copying it to the SD Card and then patching it. Can you notice anything wrong here???

Thanks,

Mo

Not sure I understand the need for all the overwriting. I would start with a clean SD card. Install all the 8.320 files and folders from here: http://download.tomtom.com/sweet/navcore/navcore_8.320.9901.gox20.cab (http://download.tomtom.com/sweet/navcore/navcore_8.320.9901.gox20.cab)

Then install only the ttsystem file from here: http://www.megaupload.com/?d=HCLO34FX (http://www.megaupload.com/?d=HCLO34FX)

Then install your patched map folder.

[msubedar]

Not sure I understand the need for all the overwriting. I would start with a clean SD card. Install all the 8.320 files and folders from here: http://download.tomtom.com/sweet/navcore/navcore_8.320.9901.gox20.cab (http://download.tomtom.com/sweet/navcore/navcore_8.320.9901.gox20.cab)

Then install only the ttsystem file from here: http://www.megaupload.com/?d=HCLO34FX (http://www.megaupload.com/?d=HCLO34FX)

Then install your patched map folder.

Ok will give it a shot, one more thing, when i install the new NC and Map the 300 will say that you have not got any voices installed, shall i copy the LoquendosTTS file from my 520 so it has a computer voice?

[msubedar]

Ok will give it a shot, one more thing, when i install the new NC and Map the 300 will say that you have not got any voices installed, shall i copy the LoquendosTTS file from my 520 so it has a computer voice?

Just gave it a shot but still no luck, still stops at the map screen with no signal and freezes and restarts if you tap the screen. There must be a solution???

[wannscan]

Hi msubedar (http://forum.gsmhosting.com/vbb/member.php?u=904772). Having read through your recent posts it looks as though you may have had the same problem as mine. All i did is keep updating the navcore in stages which seemed to give a different bootloader. To see the bootloader remove the sd card, then hold in the power button. You should get a black screen with all your devices info. Record the bootloader number to see any changes after each update.
As for which versions and maps i used scroll back to page 60 #893. There`s everything i did. However i didn`t bother with any special voices but lane correction,speed/safety cams,fuel prices all work. All done for a TomTom Go300 which now has navcore8204 + v815_2003 maps.
ps ive not yet mastered uploading any content so all ive got is from this site so all the thanks is due to the help from others on here good luck mate.:)

[msubedar]

Hi msubedar (http://forum.gsmhosting.com/vbb/member.php?u=904772). Having read through your recent posts it looks as though you may have had the same problem as mine. All i did is keep updating the navcore in stages which seemed to give a different bootloader. To see the bootloader remove the sd card, then hold in the power button. You should get a black screen with all your devices info. Record the bootloader number to see any changes after each update.
As for which versions and maps i used scroll back to page 60 #893. There`s everything i did. However i didn`t bother with any special voices but lane correction,speed/safety cams,fuel prices all work. All done for a TomTom Go300 which now has navcore8204 + v815_2003 maps.
ps ive not yet mastered uploading any content so all ive got is from this site so all the thanks is due to the help from others on here good luck mate.:)

Do you know where i can find NC V8.204, then i can give this a shot because i have figured out that the TT300 does not like NC V8.320.

Thanks for your help,

Mo

[msubedar]

Ok found the link, i am downloading "navcore_8204_9718.go940.cab" Anyone know where i can find a ttsystem file for this NC, Thanks. Mo

[wannscan]

I did try the link id used originally by johnnyboy147 for the navcore_8204 , on #490. But its been removed. He may have a backup try and pm him as its christmas he may be in a festive mood. search for his name and his posts.

[tendriver]

Ok found the link, i am downloading "navcore_8204_9718.go940.cab" Anyone know where i can find a ttsystem file for this NC, Thanks. Mo

Look here:

http://www.sendspace.com/file/ebnnpl (http://www.sendspace.com/file/ebnnpl)

[norml420]

You failed to mention what device you have.

Here is all of what it says App 7.903 (9183/81205) os: 2344 Gps v1.21, Boot 4.8600 Map USA_AND_CANADA v665.1293. Thanks for the reply. TomTom 510

[tendriver]

Here is all of what it says App 7.903 (9183/81205) os: 2344 Gps v1.21, Boot 4.8600 Map USA_AND_CANADA v665.1293. Thanks for the reply. TomTom 510

I suggest Navcore 8.204 & NA 8.15.2019 map. Read posts 1010 & 1012 on page 68.
Link to the Navcore is here: http://www.sendspace.com/file/ebnnpl (http://www.sendspace.com/file/ebnnpl)

Links to map here: http://forum.gsmhosting.com/vbb/showpost.php?p=3960919&postcount=847 (http://forum.gsmhosting.com/vbb/showpost.php?p=3960919&postcount=847)

[tendriver]

Disregard the above map link. The links on it are dead. New links for NA 8.15.2019 are here.


http://www.megaupload.com/?d=KZZ25WQL
http://www.megaupload.com/?d=CSTGYPU7
http://www.megaupload.com/?d=MPX2QZHZ
http://www.megaupload.com/?d=AGVDX2IE
http://www.megaupload.com/?d=HGX81201
http://www.megaupload.com/?d=X5DF9BPE
http://www.megaupload.com/?d=66EDM49I
http://www.megaupload.com/?d=199IEO57
http://www.megaupload.com/?d=GOWLKH5G
http://www.megaupload.com/?d=ET1SJCM1
http://www.megaupload.com/?d=AS16S4ZC
http://www.megaupload.com/?d=0VYDNNP1
http://www.megaupload.com/?d=8A466PUE
http://www.megaupload.com/?d=HY8T7HWC
---------
Password: ipmart

Meta:

; North_America
10 F4 DA DE 4F BC 35 BD A8 A9 B1 3B 34 FC 2D 9B North_America-19.meta

[tendriver]

Here is all of what it says App 7.903 (9183/81205) os: 2344 Gps v1.21, Boot 4.8600 Map USA_AND_CANADA v665.1293. Thanks for the reply. TomTom 510

I don't know what happened to my post just before 1041. It disappeared!!
Read posts 1010 & 1020 on page 68.

Here is a link for Navcore 8.204. http://www.sendspace.com/file/ebnnpl

[Balthasar83]

Is TomTom v8 the version which works on Symbian Mobiles?
Also if it is or isn't; does it provide or have the ability to give turn-by-turn navigation?!

[piet2401]

Hello,
I have a TOMTOM GO710.
Is it possible to run a navcore 8204.9718 on it?
I now have the 8010 downloaded from one of the threads here but it will not work with the maps I have.
Central_and_Western_Europe_2GB 815.2003 and 815.2034.
For what I know the 2034 should work with the 8204 but does my GO710?

[Peter.Ley]

First of all thank you so much for your great work.

I have a TomTom One v3 USA and Canada (1GB internal memory, no SD - at least for now ;) )

I want to be able to run the latest Western_Europe map. what would be the right FW and NC combination?

I have tried with the 8.10 from previous messages on this thread, everything works except the .OGG files to warn in the proximity of POIs.

Anyone has a FW/NC for One v.3?

Thanks in advance!

[0verbord]

The USA & Canada 8.15.2022 is pretty useless. But if you insist:

http://linksave.in/176686761349356cc70ee19 (http://linksave.in/176686761349356cc70ee19)

Meta.txt :
; USA_and_Canada_815_2022
CD 3C 9F E1 26 08 5B 3B 46 3C 89 E2 30 EB 1F 97 USA_and_Canada-22.meta

Why do you say this map is useless? Also, I dl'ed the North American map you posted earlier (pg 57 or so) and set up the meta file but the Easy Tools tell me there is no key for the map in the meta file. Any ideas?

[rytenuff]

If it is this map, I inadvertently put RAR after the meta. Like this:
North_America_815_201910 F4 DA DE 4F BC 35 BD A8 A9 B1 3B 34 FC 2D 9B North_America-19.metaRAR
Delete the part RAR so it reads:
North_America_815_201910 F4 DA DE 4F BC 35 BD A8 A9 B1 3B 34 FC 2D 9B North_America-19.meta
Copy it into the meta.txt which is in Progs folder.

[tendriver]

Why do you say this map is useless? Also, I dl'ed the North American map you posted earlier (pg 57 or so) and set up the meta file but the Easy Tools tell me there is no key for the map in the meta file. Any ideas?

It is very small & basic. It is for devices that have 1 GB internal memory and no card slot.

[0verbord]

If it is this map, I inadvertently put RAR after the meta. Like this:
North_America_815_201910 F4 DA DE 4F BC 35 BD A8 A9 B1 3B 34 FC 2D 9B North_America-19.metaRAR
Delete the part RAR so it reads:
North_America_815_201910 F4 DA DE 4F BC 35 BD A8 A9 B1 3B 34 FC 2D 9B North_America-19.meta
Copy it into the meta.txt which is in Progs folder.

It was and I did take the RAR off it ... still no go ....

The map directory on my GO720 is "North_America_2GB". Do I leave the directory name the same same and just copy the new 815.2019 data into it, or do I have to change the name of the directory?

[tendriver]

It was and I did take the RAR off it ... still no go ....

The map directory on my GO720 is "North_America_2GB". Do I leave the directory name the same same and just copy the new 815.2019 data into it, or do I have to change the name of the directory?

If you use BuMobiles EasyTools post on page 1, it has the meta text already included, so you shouldn't have a problem. Once you have successfully patched your map, ALL of the files for 815.2019 should be in a FOLDER. I named mine North_America_v8.15. If you use your internal memory only, you must remove the North_America_2GB FOLDER first, to have enuf space, before you copy the entire 8.15.2019 FOLDER into your device memory.

[Eramaavaris]

I have seen where a couple of guys say the auto switch to night mode is functioning on their 910s with 8.204. Comments?

Yes, it is working....although I got it working in my go910. I put nc 8.204 and it seems to work fine, but my remote control still won't work and maybe this lane guidance neither.

Do you tendriver know if lane guidance pictures option will work in go910...and the remote control too?

[tendriver]

Yes, it is working....although I got it working in my go910. I put nc 8.204 and it seems to work fine, but my remote control still won't work and maybe this lane guidance neither.

Do you tendriver know if lane guidance pictures option will work in go910...and the remote control too?

I have ZERO knowledge about TT remotes. On page 3 of your 910 preferences, there is the option of having lane guidance on or off. If that option is grayed out, then you don't have it. If it is not grayed out & reads "Hide Lane Images", then it is ON.

[Eramaavaris]

I have ZERO knowledge about TT remotes. On page 3 of your 910 preferences, there is the option of having lane guidance on or off. If that option is grayed out, then you don't have it. If it is not grayed out & reads "Hide Lane Images", then it is ON.

Yes, I had this lg button with nc 8.320, but as I wrote, it wasn't working. Now, I have nc 8.204 and I just found out, that lg is working (map w&ce 8.15.2003) :D !! Ok, now it's looking good: most of the problems is fixed and only problem (for now) is the remote control. I just have to live without it...for now..or go back to nc 7.903.

One thing is missing in nc.8.204 menu and it's the compass options. It can be shown in the screen, but there aren't any options for it. If I remember right...that can be fixed, but how?

[0verbord]

If you use BuMobiles EasyTools post on page 1, it has the meta text already included, so you shouldn't have a problem. Once you have successfully patched your map, ALL of the files for 815.2019 should be in a FOLDER. I named mine North_America_v8.15. If you use your internal memory only, you must remove the North_America_2GB FOLDER first, to have enuf space, before you copy the entire 8.15.2019 FOLDER into your device memory.

Thanks tendriver. I think the map I have is already patched. I need a copy of the "Easy Tools" to patch my ttsystem.

[0verbord]

If you use BuMobiles EasyTools post on page 1, it has the meta text already included, so you shouldn't have a problem. Once you have successfully patched your map, ALL of the files for 815.2019 should be in a FOLDER. I named mine North_America_v8.15. If you use your internal memory only, you must remove the North_America_2GB FOLDER first, to have enuf space, before you copy the entire 8.15.2019 FOLDER into your device memory.

Tendriver - did I read somewhere here that NC 8+ cannot be patched?? I have NC 8.300 on my GO720 now. Can that be patched? If not, which version should I be using?

[tendriver]

Yes, I had this lg button with nc 8.320, but as I wrote, it wasn't working. Now, I have nc 8.204 and I just found out, that lg is working (map w&ce 8.15.2003) :D !! Ok, now it's looking good: most of the problems is fixed and only problem (for now) is the remote control. I just have to live without it...for now..or go back to nc 7.903.

One thing is missing in nc.8.204 menu and it's the compass options. It can be shown in the screen, but there aren't any options for it. If I remember right...that can be fixed, but how?

With "Voice Command", the neccessity of a remote should be diminished to a degree. If you elect to show the "compass" on the map page, all it does is point to North. NO fix that I know of. You can go to the second page of Status Bar Preferences on Change Preferences page 4, and select Direction. That will give you your heading direction in degrees in the lower right corner of the map page.

[tendriver]

Thanks tendriver. I think the map I have is already patched. I need a copy of the "Easy Tools" to patch my ttsystem.

You have it backwards. You can't patch the ttsystem file. You must patch the map.

[tendriver]

Tendriver - did I read somewhere here that NC 8+ cannot be patched?? I have NC 8.300 on my GO720 now. Can that be patched? If not, which version should I be using?

Neither you nor I can patch NC 8, but there are posts on this thread that relate to getting a patched 8.30. Rather than sorting through 71 pages, here is a link to this threads archives, which is only 5 pages.

http://forum.gsmhosting.com/vbb/archive/index.php/t-586405-p-1.html (http://forum.gsmhosting.com/vbb/archive/index.php/t-586405-p-1.html)

[bigboab5]

Hi Guys,

A few weeks ago some of you great guys helped me instal Western Europe Maps on a Tomtom ONE Version 3 (I think It was V3!!) Anyway it had an SD slot in it. NOW... my question is.... I am thinking of buying a Tomtom ONE V4, but from what I can see it has internal memory. So is it still possible to hack these. Or does it have an SD slot that is not mentioned anywhere I have looked?

Thanks for all your help guys.

Bigboab

[0verbord]

Neither you nor I can patch NC 8, but there are posts on this thread that relate to getting a patched 8.30. Rather than sorting through 71 pages, here is a link to this threads archives, which is only 5 pages.

http://forum.gsmhosting.com/vbb/archive/index.php/t-586405-p-1.html (http://forum.gsmhosting.com/vbb/archive/index.php/t-586405-p-1.html)


I am downloading a patched 8.30 now. Hope I can figure out what to do with it once I get it .... haha. If I want to use TT Home I gather I have to patch that as well ... I saw in the last link where to place the dll file but the link to the dll file was dead. Do you know of another link for this?

OK, I see all the files I will need were probably in with the patched 8.30 file. Think I will try and give this a GO (yes, pun intended) now

[BuMobiles]

Hi Guys,

A few weeks ago some of you great guys helped me instal Western Europe Maps on a Tomtom ONE Version 3 (I think It was V3!!) Anyway it had an SD slot in it. NOW... my question is.... I am thinking of buying a Tomtom ONE V4, but from what I can see it has internal memory. So is it still possible to hack these. Or does it have an SD slot that is not mentioned anywhere I have looked?

Thanks for all your help guys.

Bigboab

any tomtom with or without a sd card slot can be updated, just need to know the process to update the devices :cool:

[tendriver]

Hi Guys,

A few weeks ago some of you great guys helped me instal Western Europe Maps on a Tomtom ONE Version 3 (I think It was V3!!) Anyway it had an SD slot in it. NOW... my question is.... I am thinking of buying a Tomtom ONE V4, but from what I can see it has internal memory. So is it still possible to hack these. Or does it have an SD slot that is not mentioned anywhere I have looked?

Thanks for all your help guys.

Bigboab

You are right. I doesn't appear to have a card slot. The lack of memory is the #1 complaint in the reviews that I have read.

[bigboab5]

Thanks guys, that does put me in a quandry, whether to get a V3 or a V4........ any advice would be gratefully accepted... Thanks.

Bigboab

[Peter.Ley]

TomTom One v3 does not have an SD slot either http://www.tomtom.com/lib/doc/ONE3datasheet.pdf here you have a nice shoot of the bottom part http://www.flickr.com/photos/poppap/2463924390/

... unless you add it one internally :-) http://www.flickr.com/photos/poppap/2463921598/in/set-72157604869913140/

[Cozz]

Hi guys. I've been going crazy with my TT One XL and trying to put a euro map on a sd card.

TT Home....2.5
TT One XL.... 8.010


I backed the unit up then installed everything on the 2gig card via TT Home. I deleted US and Guam folders and installed the Western_and_Central_Europe-15 folder. I downloaded this map from a members post so I don't know if it's been patched or what not.

I follow the tutorials everywhere and the forum instructions using Easyusetools but with no luck. I copy the meta and pna files to the proper folder, copy the device id to the text file then run "RunMeforAllAutomatic", choose "1", then choose the letter of the drive my card is in....(I have tried with the card in the TT and directly at the PC, no difference)


### Run Fake meta.txt Check ###

Western_and_Central_Europe-15.meta v810 bld1907 Key seems to be OK
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~

### Run Keygen ###

f:\WCE_810_1907\Western_and_Central_Europe-15.meta.dct exist already


f:\WCE_810_1907\Western_and_Central_Europe-15.meta.dct exist



Used DeviceID from ttgo.bif = (deleted)

Used Option 1 Hint: you need also a patched TTsystem / TomTom Navigator.exe !


Press any key to continue . . .


Then what?

I'm always getting the red screen when booting up with the card. It sees the map but says it can't be used.

Any help would be great.:confused:

-Thanks

[SIRHOWIE]

Hi have a look for a working Navcore for tomtom one or xl .
The navcore from tomtom if its above 7.5 the one you are using it
wont activate the maps they have blocked this.
Just trawl this section and find a working one cracked one
Hope this helps
just Found this try it h**p://www.sendspace.com/file/ebnnpl
Sir Howie

[splesh79]

Hi, can someone help me to get my new map working?
I have a tomtom one 1GB with app. 7.903 and the original map: Western Europe v660.1256.
Now I want to update to a new WE map. I have downloaded both 'Western Europe 815.2024' and 'Western Europe 715.2024'.
I tried to get both to work, but didnt manage, I think I get stuck at the patching of 7.903, but I'm not sure.

Could someone fix an idiot guide, or something for me?
Tnx!

[piet2401]

@LeCarpiste........if you haven't already got a cracked ttsystem you can get it HERE.
HERE. (http://www.2shared.com/file/4437049/83f166eb/79039183_patched_home_dll_and_ttsystem.html)

Replace your ttsystem file with this one.


pass:don't_just_leech_share!

I get a password is not correct!!!

[splesh79]

Hi, can someone help me to get my new map working?
I have a tomtom one 1GB with app. 7.903 and the original map: Western Europe v660.1256.
Now I want to update to a new WE map. I have downloaded both 'Western Europe 815.2024' and 'Western Europe 715.2024'.
I tried to get both to work, but didnt manage, I think I get stuck at the patching of 7.903, but I'm not sure.

Could someone fix an idiot guide, or something for me?
Tnx!

correction: I dont have map 715.2024 (dont think it even exists), but according to
http://forum.gsmhosting.com/vbb/showpost.php?p=3951592&postcount=769
map 815.2024 should be compatible with app 7.903.

[rytenuff]

You cannot "patch" the new NAVCORES anymore. You need an already cracked navcore.

[Cozz]

Hi have a look for a working Navcore for tomtom one or xl .
The navcore from tomtom if its above 7.5 the one you are using it
wont activate the maps they have blocked this.
Just trawl this section and find a working one cracked one
Hope this helps
just Found this try it h**p://www.sendspace.com/file/ebnnpl
Sir Howie


You cannot "patch" the new NAVCORES anymore. You need an already cracked navcore.

Thanks for the replies. Now I'm starting to understand. I had the 7.xxx on it before the update so I couldn't figure out why I needed it. It's starting to add up now.

I downloaded the link you gave me and I find three folders. I understand about patching TT Home with the dll file as I have read about it before. I also notice the other two being with x20. x30.910 difference. I would assume the regular file is for my One XL TT unit.

I copied ttsystem and mctx over to the 2 gig card but what about the Outsourced.bin folder and switchfiles RAR? Do I need to place them somewhere? The readmenot txt is a bit confusing.

-Thanks again

[piet2401]

I would make a copy of the current Navcore files before I did an overwrite. Then copy (overwrite) the files in the "navcore_SE_8.204.9718_basicpack" folder into your TT device. Open the "SE_ttsystem.8204.9718.x10.x20.x30.rev.1.3.3" folder and copy the ttsystem file into your device. To operate your TT from TT HOME on your puter, copy the "Home_Navcore.8.204.9718_tomtom.com" FOLDER, not just the contents to here on your puter: C:\Users\XXXXXXX\AppData\Roaming\TomTom\HOME\Profi les\bgmv5oco.default\extensions

That should do it.

Indeed that did it.
My GO710 is now updated to 8.204 and run's with the 815.2003 2GB map.
This after a lot of reading and downloading (with Jdownloader).:cool:
Many thanks to all you guys who put all these answers here time over time for the newbies.
As I understand also a lot of times once again.:D

[tendriver]

Thanks for the replies. Now I'm starting to understand. I had the 7.xxx on it before the update so I couldn't figure out why I needed it. It's starting to add up now.

I downloaded the link you gave me and I find three folders. I understand about patching TT Home with the dll file as I have read about it before. I also notice the other two being with x20. x30.910 difference. I would assume the regular file is for my One XL TT unit.

I copied ttsystem and mctx over to the 2 gig card but what about the Outsourced.bin folder and switchfiles RAR? Do I need to place them somewhere? The readmenot txt is a bit confusing.

-Thanks again

Is this a One XL with NO internal memory & only a SD card?

[rytenuff]

The following is the original readmenot .txt written in hopefully easier to understand English ( for a native English speaker) syntax. It has not been changed essentially in meaning from the original English/German syntax. I hope it is of some use.
.................................................. .................................................. .............................

© TTUser 2008



Easyusetools for Keygen, Mapcheck, Metacheck, ttsystem-Patcher
by TTuser

It is better to Extract it directly to C:\Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher or similar
NOT to TTDevice!

ttsystem Patcher does NOT work with Navcore 7.900,7.903, 8.010 and higher!
You need to use the already patched ttsystem.

It is important: to run your Device first, to have a valid ttgo.bif / ttnavigator.bif

With RunMeforAllAutomatic the prog. should read the ID from File ttgo.bif or ttnavigator.bif

Option "Search Home Emulator dlls and patch each dll" will Search your complete HD for TTHome Emulator dlls and patch each dll.
You will see nothing, simply wait until you are told to press a key........

To activate Speedcams it is better to do it manually with "insert_meta_from_Map_here" Folder.
The Keygen will possibly fail to do it the fully automatic Way.

__________________________________________________ __________________
It is recommended to use: RunMeforAllAutomatic.cmd

The program will try to search and select the correct Settings,
Examine the selected Values, if they are correct press Enter, if not then press N

(To select Option 3 press also N)

First select which Navcore Version you are running.

Available Options:
1. For Version 7.451, 7.910, 7.900,7.903, 8.010 and higher
2. For Version 7 ( but NOT 7.451, 7.910. 7.900,7.903, see above) up to 8.002
3. For Map Version 6

for Option 1. Navcore 8:
You need only to enter the TT-Driveletter.
Enter your Devicecode. (only if it can't read ID from ttgo.bif or if it is not in DeviceID.txt)
Read Output
Done

for Option 2.
1. run Keygen for all Maps at your TTDevicestorage
2. run ttsystem Patcher for ttsystem which is in your TTDevicestorage
3. Search Home Emulator dlls and patch each dll

Enter your Devicecode. (only if it can't read ID from ttgo.bif)
Read Output
Done

for Option 3. Map Version 6:
You need only to enter the TT-Driveletter.
Enter your Devicecode (if not written in deviceid.txt)
Read Output
Done

__________________________________________________ ________________________
For use with the Folder "insert_meta_from_Map_here" and RunMeforDCT.cmd

The Manual Way:

Write your Devicecode into File DeviceID.txt and the Keygen will use this automatically.

Copy the *map*.meta [found in the map folder] (NOT the meta.txt, leave that in Progs folder) and if you wish, also *.pna (also to be found in the map folder) into "insert_meta_from_Map_here" Folder.

First select for whichever Navcore Version you are running.
1. For Version 7.451, 7.900,7.903,7.910 8.010 and higher
2. For Version 7( but NOT 7.451, 7.900 7.903, 7.910.see above) up to 8.002
3.For Map Version 6

for Option 1. Navcore 8
1. Run Keygen for "insert_meta_from_Map_here"

Enter your Devicecode. (if not written in deviceid.txt)
Read Output
If OK Copy the new *.dct into your Mapfolder from Device.
Done

for Options 2. Navcore 7
1. Run Keygen for insert_meta_from_Map_here
2. Run Keygen for all Maps that are in your TTDevicestorage
3. Run ttsystem Patcher for ttsystem that is in your TTDevicestorage
4. Search Home Emulator dlls and patch each dll

Enter your Devicecode. (if not written in deviceid.txt)
Read Output
If OK Copy the new *.dct into your Mapfolder in your Device.
Done


for Option 3. Map Version 6:
You need only to enter the TT-Driveletter.
Enter your Devicecode (if not written in deviceid.txt)
Read Output
Done
_______________
Needed Files:

for Metacheck you need the map*.pna and map*.meta inside "insert_meta_from_Map_here" Folder.

for Keygen you need only the map*.meta "insert_meta_from_Map_here" Folder.

for Mapcheck you need map*.meta, map*.dct and maybe if you wish map*.pna, and the correct Devicecode/serial associated with the *.dct

__________________________________________________ ______________________
RunMeforMetaKey.cmd

If you have a bought Map you can create the ****fish Key with this.

Options
1. Run Mapcheck for all Maps on your TTDevice
2. Run Mapcheck for Folder "insert_meta_from_Map_here"

Option 1 you need a valid TTgo.bif.

You find the Mapkeys in meta.txt and the complete Output in File mc.txt or/and mcseri.txt.

You can also write your Serial or ID in DeviceID.txt.

For original Maps you need your Serial.
For stolen, activated with Keygen Maps you need your ID.
For Voices you need your ID.

__________________________________________________ _______________________
About HOME:

7.451, 7.900,7.903, 7.910, 8.010, 8.010 and up Home dll you cannot patch with this program.
You need an already patched "Emulator .dll" only for the emulated (virtual) TTHome Device.
You need of course to let Home first download the original Files first.

You can for Navcore 7, (But NOT 7.451, 7.900,7.903, 7.910) use Option 3 (RunMeforAllAutomatic) or 4 (RunMeforDCT) to patch all dlls automatically. It may possibly take a long time to search your complete HD.
If you run it somewhere from HD C: it will search only on C: for the dlls, If you have the dlls on an other HD, run the Tool from the other Drive.

Manual Way:

The Path to the dlls is different for XP, Vista and Home Version. You will not find the dlls by using Windows Search.

For XP normally:

for an old Home 1.x:
C:\Documents and Settings\All Users\ApplicationData\TomTom\HOME\Navigator Dlls\

For a Home up to 2.1 :

C:\Programfiles\TomTomHome2\xul\plugins\emulator\n avcore\

For 2.2 - x.x :
You can see inside Home under Help > Systeminfos > Profilfolder

XP:

C:\Documents and Settings\????\ApplicationData\TomTom\HOME\Profiles \????.default\extensions\Navcore.7.?????@tomtom.co m

Vista:

C:\Users\???????\AppData\Roaming\TomTom\HOME\Profi les\?????????.default\extensions\Navcore.8.?????@t omtom.com

MAC:

User's_Home/Library/ApplicationSupport/TomTomHOME/Profiles/????????.default/Resources/Extensions/Navcore.8.002.9117.mac@tomtom.com/8-002-9117-1.framework

You select the dll from your used Firmwareversion (7.162,7.221...) example 7-221-8572-3.dll and copy this into Folder "insert_meta_from_Map_here" and execute RunMeforDCT or RunMeforAllAutomatic and wait a short while, you will see on top of the Screen what is now happening. When it is finished you can close the Window with X if you now only need to patch the dlls. Copy the dll back to the Homefolder and overwrite the original.

OK = dll now patched
Cant find= dll already patched or old V6 dll or 7900,7.903, 8010 and higher
Can't open * for reading = remove space from name

________________________________________________
In_Case_of_Emergency.zip

If your PC is strange, try this simple Version.
Copy *.meta along with the other Files.




© TTUser 2008

[Cozz]

Is this a One XL with NO internal memory & only a SD card?

It does have internal memory. About 1 gig or so me thinks. It came with the US and Guam maps. I don't want to touch them and just try to keep the TT unit as stock as possible. I fly to Europe and back often so a single unit that does it all would be great for me. A friend from business does the same thing and he bought the 920 with US and Euro maps but I can't afford that right now.:)

[tendriver]

Thanks for the replies. Now I'm starting to understand. I had the 7.xxx on it before the update so I couldn't figure out why I needed it. It's starting to add up now.

I downloaded the link you gave me and I find three folders. I understand about patching TT Home with the dll file as I have read about it before. I also notice the other two being with x20. x30.910 difference. I would assume the regular file is for my One XL TT unit.

I copied ttsystem and mctx over to the 2 gig card but what about the Outsourced.bin folder and switchfiles RAR? Do I need to place them somewhere? The readmenot txt is a bit confusing.

-Thanks again

It does have internal memory. About 1 gig or so me thinks. It came with the US and Guam maps. I don't want to touch them and just try to keep the TT unit as stock as possible. I fly to Europe and back often so a single unit that does it all would be great for me. A friend from business does the same thing and he bought the 920 with US and Euro maps but I can't afford that right now.:)

OK 1. IF you install a map from this or any other forum, you have to patch it. To use a patched map, you must have a cracked/patched Navcore.
2. Put anything to do with your Navcore in your internal memory. Put your patched map only on your SD card.
3. You do not need the Outsourced.bin folder. I don't know of any reason you would need the switchfiles.

[rytenuff]

Hopefully the use of the Outsourced folder May be better understood with this text adapted from the original to English syntax. The essential meaning remains unchanged.
.................................................. .................................................. ....................................

© TTUser 2008

With Outsourced. xxxx you can save RAM. Drop the complete Folder in root.

With a File ttgo.bak, with the latest OFFICIAL Navcore-Numbers for your Device in root Home will think you have the correct version installed, not the Version that is actually installed. You only need this if your Device has the Official Version NOT this Version here.

You can create a ttgo.bak yourself with correct Numbers or use the inbuild auto Creation.
Use version.txt in root or /Config with your required Official Numbers.

Currently 22Dec '08 these are for:

TomTom GO, GO x00, GO x10, ONE 1st Edition, ONE 2nd Edition
A:7903
B:9183

Rider
A:7901
B:9181

ONE 30-Series, XL 30-Series, ONE XL, ONE 3rd Edition
A:8010
B:9369

x20,x30,630
A:8300
B:9732

With the Switchfiles in Root or in Folder Config you can configure yourself your Device.
Copy the Files from switchfiles.zip to root or /Config. Only root or Folder Config, NOT both!

TTSoff = switch TTS off
FMon = FMTransmitter on (for x10)
btoff = disable BT, if you do not need it , you may then save a little more RAM
bton = if you not have BT, enabling this will show Button for Speedcams in Menu
noqfixdel = disable Quickfix erase after you have pressed reset, if you wonder where Qfixfiles have gone.
delgns = remove (Start,supend) old TMC-Data (gns/gnsdata)
cleanflash= delete all from Flash that is possible (*.mac etc.), Settings will be lost
viewmsg = enable BootHelpMessages
noclean = disable the "remove all unneeded Files" to save RAM
rm = remove a few additional Files (these may be needed for BT) to save RAM (experimental)
runcheck = check a few "important" Files, view config.txt for Result
changedtext.txt = you can change the Text on Status/Info Screen, write your own Text in the File e.g. "Jim's TomTom"
poweroff = Device switch really completely off, not only sleeping.
SDid = write for each SD/Memory another Number inside and you can for each use your own different Mainsetting. Handy if you use more than one SD card.
usesetting= use always Settings from SD, not the in Device saved Settings

The Following
Does not apply to ALL Navs (this was adapted from 8.070)

model.txt = write one from following inside

ori = switch to your real Device
xls = switch to ONE XLS Emulation (for ones)
onettssdk = switch to ONE + TTS + SDK
onettssdk2= switch to ONE + TTS + SDK
x20 = switch to x20 Emulation
Standard is x30

cycle.txt = switch each reset between Setting from cycle.txt <> model.txt
It BacksUp also the Mainsettings between both Emus.( Emulations)

© TTUser 2008

[Cozz]

OK 1. IF you install a map from this or any other forum, you have to patch it. To use a patched map, you must have a cracked/patched Navcore.
2. Put anything to do with your Navcore in your internal memory. Put your patched map only on your SD card.
3. You do not need the Outsourced.bin folder. I don't know of any reason you would need the switchfiles.


I never bothered doing anything to the internal memory. I thought I could do it just to the 2 gig card. I just put in the two Navcore files(ttsystem and mctx) into the TT memory and now it doesn't go past the TT dashboard picture. Just frozen until I hard reset it. I didn't delete the old files, just added some extra letters to the original files so it's easy to go back to them and added the new ones.

Should I be using a 8204.9718 ttsystem file when my unit is 8.010?

On a side note, TT Home does see my card and I can even use "Operate my Device" on it for the euro map. Pretty cool.


Thanks to everyone, I'm one step closer...me thinks.:)

[piet2401]

After the update of my GO710 to 8.204 it is now able to run with the 4GB SDHC cards.
I now have it running with the large Western_and_Central_Europe V815.2023.
Very nice!!!

[piet2401]

Also the GPSfix's are downloadable as are the mapshares!!!
Works perfectly now.
Many thanks guys!!!!!!

[THEPHONEJUNKY]

TomTom + Map of Western & central Europe for Truck

Includes
Navcore 8.070 9589
Western and Central Europe 815 - 2112

DLC LINK

PASSWORD fromblacki

TomTom Karte von West- und Mitteleuropa Truck v.8.15.2112

TomTom WORK introduces connected navigation

Connected Navigation = Navigation + Communication + Vehicle Management

Connected Navigation helps you to improve management and control of your vehicles and drivers and offers easy two-way communication and navigation for your people on the road and in the office.

TomTom WORK offers Connected Navigation solutions combining plug and play management technology with smart navigation and communication tools. All you need is a mobile navigation system connected to the web-based TomTom WEBFLEET vehicle management and communication service. No special software or interference from IT is needed. Therefore TomTom WORK is for any sort and any size of fleet.

Surveil and guide your vehicles and staff, manage and plan your business (http://www.ipmart-forum.com/showthread.php?t=226076&page=32#), communicate with your drivers and help them to find their way the easy way!

TomTom WORK: Plan your day the easy way!
TomTom WORK brings:

Smart and efficient tracking, tracing and planning
View your vehicles in real time on street level maps and know the exact locations. Identify where the vehicle is located against your planning and pick the best vehicles to manage a new task.

Easy and clear navigation
Navigation by order with destination address makes the driver's job a lot easier and less stressfull.

Two way communication
Send (standard) text messages (http://www.ipmart-forum.com/showthread.php?t=226076&page=32#) from and to the office, give client orders and locations or send tasks with navigation coordinates via the PC (http://www.ipmart-forum.com/showthread.php?t=226076&page=32#) in the office to the drivers. Simple and Quick!

Professional reporting
Make automatic logbooks of driving time, times of standstill and habits for tax, for KM registration, pay roll and expense accounting. Receive daily, weekly or monthly reports containing exact data your company requires.

[tendriver]

I never bothered doing anything to the internal memory. I thought I could do it just to the 2 gig card. I just put in the two Navcore files(ttsystem and mctx) into the TT memory and now it doesn't go past the TT dashboard picture. Just frozen until I hard reset it. I didn't delete the old files, just added some extra letters to the original files so it's easy to go back to them and added the new ones.

Should I be using a 8204.9718 ttsystem file when my unit is 8.010?

On a side note, TT Home does see my card and I can even use "Operate my Device" on it for the euro map. Pretty cool.


Thanks to everyone, I'm one step closer...me thinks.:)

1. You don't need to fool with the mctx file.
2. You have to use the ttsystem file for the Navcore that is on your device.
3. Rather than "renaming" the original files, cut them out of your device & paste them somewhere on your puter.

[watcheben]

Hello guys !
first excuse my "froggy" english....i put 815.2034 on my go 730 and it works fine.thanks for all.but i try to do the same on a one xl with a 2gb sdcard and i get the red cross.
Is it the same patched ttsystem for a 8.30 navcore (go 730) and a 8010 (one xl) ? nb: when i look in xp there is only one memory ,not tomtom and card.
What's wrong ?

[tendriver]

Hello guys !
first excuse my "froggy" english....i put 815.2034 on my go 730 and it works fine.thanks for all.but i try to do the same on a one xl with a 2gb sdcard and i get the red cross.
Is it the same patched ttsystem for a 8.30 navcore (go 730) and a 8010 (one xl) ? nb: when i look in xp there is only one memory ,not tomtom and card.
What's wrong ?

Each version of Navcore has it's own ttsystem file. You can't intermix them.

[Eramaavaris]

After the update of my GO710 to 8.204 it is now able to run with the 4GB SDHC cards.
I now have it running with the large Western_and_Central_Europe V815.2023.
Very nice!!!

Is the lane guidance pictures -option and IQroutes working with that map? Do someone knows the newest version of western and central europe map which has those?

[erkan0671]

you have done good work man im a little man who is learning to install tomtom to mobile's tomtom devises and mobile's and im form holland
:P

[tendriver]

Is the lane guidance pictures -option and IQroutes working with that map? Do someone knows the newest version of western and central europe map which has those?

Try W&CE 8.15.2003

http://www.ipmart-forum.com/showpost.php?p=2364523&postcount=186 (http://www.ipmart-forum.com/showpost.php?p=2364523&postcount=186)

[ianmb17]

Is there any advantage to upgrade from nc8.300 and maps 815.2003 on a tomtom go510.Is nc 8.204 upgrade or downgrade

[joseph64]

Yes, it is working....although I got it working in my go910. I put nc 8.204 and it seems to work fine, but my remote control still won't work and maybe this lane guidance neither.

Do you tendriver know if lane guidance pictures option will work in go910...and the remote control too?

Hi, With the new Navcore, the GO910 does not work any more with the RC. You need a new RC with Buetooth with these new Navcores. (€. 49,**).
The RC was for Navcores 7.XXX.
(Mine has also become obsolete because of this).
Cheers, Joseph

[THEPHONEJUNKY]

TomTom + Map of Western & central Europe for Truck

Includes
Navcore 8.070 9589
Western and Central Europe 815 - 2112

DLC LINK

PASSWORD fromblacki

TomTom Karte von West- und Mitteleuropa Truck v.8.15.2112

TomTom WORK introduces connected navigation

Connected Navigation = Navigation + Communication + Vehicle Management

Connected Navigation helps you to improve management and control of your vehicles and drivers and offers easy two-way communication and navigation for your people on the road and in the office.

TomTom WORK offers Connected Navigation solutions combining plug and play management technology with smart navigation and communication tools. All you need is a mobile navigation system connected to the web-based TomTom WEBFLEET vehicle management and communication service. No special software or interference from IT is needed. Therefore TomTom WORK is for any sort and any size of fleet.

Surveil and guide your vehicles and staff, manage and plan your business (http://www.ipmart-forum.com/showthread.php?t=226076&page=32#), communicate with your drivers and help them to find their way the easy way!

TomTom WORK: Plan your day the easy way!
TomTom WORK brings:

Smart and efficient tracking, tracing and planning
View your vehicles in real time on street level maps and know the exact locations. Identify where the vehicle is located against your planning and pick the best vehicles to manage a new task.

Easy and clear navigation
Navigation by order with destination address makes the driver's job a lot easier and less stressfull.

Two way communication
Send (standard) text messages (http://www.ipmart-forum.com/showthread.php?t=226076&page=32#) from and to the office, give client orders and locations or send tasks with navigation coordinates via the PC (http://www.ipmart-forum.com/showthread.php?t=226076&page=32#) in the office to the drivers. Simple and Quick!

Professional reporting
Make automatic logbooks of driving time, times of standstill and habits for tax, for KM registration, pay roll and expense accounting. Receive daily, weekly or monthly reports containing exact data your company requires.

Sorry no meta. I will post one when i get it.

[juhanim]

Hi, With the new Navcore, the GO910 does not work any more with the RC. You need a new RC with Buetooth with these new Navcores. (€. 49,**).
The RC was for Navcores 7.XXX.
(Mine has also become obsolete because of this).
Cheers, Joseph

I have GO910, too. The only problem was this RC with new NC. Have you bought RC? Is the RC TomTom's or is there another RC working with TomTom?

Thanks, Juhani

[joseph64]

Is there any advantage to upgrade from nc8.300 and maps 815.2003 on a tomtom go510.Is nc 8.204 upgrade or downgrade

I would not bother to change. NC8.3 is about the last one except for some newer builds. Maps 815.2003 is the best with lane guidance as yet!
Only reason to change Navcore could be that you can use downloaded maps.
If you are fine with your actual maps, leave it until you need new maps.
Cheers, joseph64

[joseph64]

I have GO910, too. The only problem was this RC with new NC. Have you bought RC? Is the RC TomTom's or is there another RC working with TomTom?

Thanks, Juhani

This is the new original Tom Tom RC sold by TT.
I have not bought it as I have never used the RC not even when it was still working, except to play with it once when my TT was a new toy.
I don't know if there are compatibles.
Cheers, joseph64

[SIRHOWIE]

Hi
Can anyone tell me how to get the ****fish code for a tt trucker map
nice post but useless without it have a nice xmas to you all
cheers SirHowie

[rytenuff]

It uses .mct not .dct files. It is being worked on by TTUser and TheMan. We need to be patient. When it is cracked it will be announced on here.

[rytenuff]

; Western_and_Central_Europe_TRUCK-20
CC E7 35 C7 29 C2 EE E1 3A F4 E3 9A 9C 18 5E E5 Western_and_Central_Europe_TRUCK-20.meta

[Cozz]

### Run Fake meta.txt Check ###


Western_Europe_1GB-22.meta v815 bld2024 Key seems to be OK
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~
Basic Explanation:

OK = All good and copy now .dct into the Mapfolder.

Wrong DeviceID symbols = Devicecode wrong written

There is no such map in keyfile Meta.txt = Your Map is until now not supported

Cant find file = no *.meta file inside Folder "insert_meta_from_Map_here"

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~
### Run Keygen ###

'Western_Europe_1GB-22.meta' - OK
^^^^^^^^Keygen Output here!^^^^^^^^^^

Keygen says OK , copy now the new *.dct into your Mapfolder

Used DeviceID = (deleted)

Used Option 1 Hint: you need also a patched TTsystem / TomTom Navigator.exe !


Press any key to continue . . .


Is this normal guys?

I have tried several cards, different maps, different Navores. I pretty much stumped. The DTC file looks exactly the same when made even when I put in the wrong info such as keys in the meta test file.

Any other ideas? Thanks.

[Eramaavaris]

I have GO910, too. The only problem was this RC with new NC. Have you bought RC? Is the RC TomTom's or is there another RC working with TomTom?

Thanks, Juhani

Now we need to know which version or what kind of a remote control we should buy if we want one? So, the original rc won't work with nc 8.xxx. I asked Tomtom if nc v8.xxx is coming for go910, but they said there aren't any interest to make that...for now. So if I want that rc, do I have to buy rc made for example for x20, x30 or x40 series? Which one will work with go910 with nc 8.204?

Juhani, ifyou are using nc v8.3xx, do you have any problems? (execpt rc)

And tendriver I had map w&ce 815.2003 and all is functioning just fine...even lane guidance pictures :D. And if I can fix this rc issue just buying new rc...I'm happy :)

[tendriver]

Now we need to know which version or what kind of a remote control we should buy if we want one? So, the original rc won't work with nc 8.xxx. I asked Tomtom if nc v8.xxx is coming for go910, but they said there aren't any interest to make that...for now. So if I want that rc, do I have to buy rc made for example for x20, x30 or x40 series? Which one will work with go910 with nc 8.204?

Juhani, ifyou are using nc v8.3xx, do you have any problems? (execpt rc)

And tendriver I had map w&ce 815.2003 and all is functioning just fine...even lane guidance pictures :D. And if I can fix this rc issue just buying new rc...I'm happy :)

Remote Control:
http://www.tomtom.com/products/accessories/accessory.php?ID=375 (http://www.tomtom.com/products/accessories/accessory.php?ID=375)

I have no idea if this will solve your problem.

[tendriver]

Is this normal guys?

I have tried several cards, different maps, different Navores. I pretty much stumped. The DTC file looks exactly the same when made even when I put in the wrong info such as keys in the meta test file.

Any other ideas? Thanks.


Make a folder for your map with all the map files in it and name it WITHOUT spaces, like North_America_815_2019 and leave it on your PC for the moment.
Look inside that folder and locate the files called .meta and .pna.
Copy both files to the folder "insert_meta_from_Map_here"
Make sure the meta.txt text document is in the folder called Progs.
Now click on the, "RunMeforDCT" command script.
You should see 3 options
Select number 1 which says Run it for Navcore 8.010 and higher.
You then get 2 options
Select 1 which says Run Keygen for insert_meta_from_Map_here.
You should see a DCT file appear in the insert_meta_from_Map_here folder.
Copy all the files in the insert_meta_from_Map_here into your map folder.
Place your map folder in the root of your TomTom i.e. NOT inside any other folder or on a SD card.

[juhanim]

Now we need to know which version or what kind of a remote control we should buy if we want one? So, the original rc won't work with nc 8.xxx. I asked Tomtom if nc v8.xxx is coming for go910, but they said there aren't any interest to make that...for now. So if I want that rc, do I have to buy rc made for example for x20, x30 or x40 series? Which one will work with go910 with nc 8.204?

Juhani, ifyou are using nc v8.3xx, do you have any problems? (execpt rc)



I use nc8.3xx and I haven't noticed any problems except rc, but I haven't used nc8.3xx and new maps a lot. I have only used it about 100 km range of my hometown. I might travel to Lappland and after that I will know more about problems (if there is). I will tell here, if I find any problems.

[BuMobiles]

Happy Christmas to everyone on the GsmHosting Forum!

:D:D:D:D:D

http://www.presentationhelper.co.uk/powerpoint-templates/00315/468slide1.jpg

http://i68.photobucket.com/albums/i38/BrumSumarin/HappyChristmas.jpg

[rytenuff]

Merry Xmas and safe driving for all.

[tendriver]

merry christmas!!!!!

[OrangeJuice]

Hey. I was wondering if anyone can help. I have just got a V3 tomtom one. It has out of date european maps on it.

I have downloaded Tomtom Western_and_Central_Europe_2GB_810_1940

I have generated the dtc file fine.

I have tried to use a TT patcher but it says


Can't find!

already patched
or a old Version, this works only with a V7 up to 8.002 Version
not more with 8.010 and higher

Press any key to continue . . .

I think the device is running 'App 7.903'. . I don't know what to try now.

Many thanks for any help.

[tendriver]

Hey. I was wondering if anyone can help. I have just got a V3 tomtom one. It has out of date european maps on it.

I have downloaded Tomtom Western_and_Central_Europe_2GB_810_1940

I have generated the dtc file fine.

I have tried to use a TT patcher but it says



I think the device is running 'App 7.903'. . I don't know what to try now.

Many thanks for any help.

Can't help without knowing EXACTLY which APP/Navcore the device is running.

[Fire2104]

ok new user here so bear with me.

I have a go 720 with nav core 8.30



I am downloading the maps for north america on post 1042


I want to install these maps on my 2 GB sd card



once I get the maps and unzip them



then I used the patcher on first page? correct?



what else do I need to do?



many thanks in advance and happy holidays

[OrangeJuice]

Can't help without knowing EXACTLY which APP/Navcore the device is running.


When I launch the info page it says 'App 7.903' but there are loads of other numbers as well - if 'App' means navcore then yeah its 7.903. Cheers

[Fire2104]

....on my go 720 I have the latest 815 maps running and I am even running 8-320-9901-1 f/w.......all is good except I cannot get the operate my go to work on TThome, I really only need that so I can set a password on my 720 I tried putting the file in the appluaction area...I am usingg vista by the way.......any ideas?


Thanks

[Fire2104]

....on my go 720 I have the latest 815 maps running and I am even running 8-320-9901-1 f/w.......all is good except I cannot get the operate my go to work on TThome, I really only need that so I can set a password on my 720 I tried putting the file in the appluaction area...I am usingg vista by the way.......any ideas?


Thanks



ok I got it all working never mind last 3 posts

[tendriver]

When I launch the info page it says 'App 7.903' but there are loads of other numbers as well - if 'App' means navcore then yeah its 7.903. Cheers

Go here:

http://forum.gsmhosting.com/vbb/showpost.php?p=3951578&postcount=768 (http://forum.gsmhosting.com/vbb/showpost.php?p=3951578&postcount=768)

[rytenuff]

For anyone wishing to patch a Navcore which is the correct one for their device i.e. downloaded properly from HOME, this new patcher is for them. It will also patch the properly downloaded dll of HOME for that Navcore.

This patch is NOT meant for Navcores which are NOT meant for their device and will NOTallow maps which are NOT meant for use with that Navcore to be run.
For that, you will still need to use TTUser's, "SE Editions" of cracked ttsystems.

http://rapidshare.com/files/175789901/yDGpatch_1-1-0-3.rar

[rytenuff]

Re.above.
This is from the Readme file:

If you want to run a standard device system, as per TomTom official download, recommended for your device,
ie.. 8300 on a 520 - THIS is for YOU.

If you want to run a new, shiny, latest version navcore or upgrade to run 'unofficial' functions,
ie.. have ALG on a One - USE SE VERSIONS.

REMEMBER: This is to enable 'compatible' maps to run on 'official' App/Navcore direct from TT via Home. It will make your device run as STANDARD, not emulate another 'higher' device.. ie..

A 520 will run App v8300 & v815.2003 map & look like a 520
A 910 will run App v7900 & v815.2024 map NOT v815.2003, & look like a x10 NOT an x40

Your device will have all STANDARD functionality as per 'Original'/'Official' TomTom release. If you require non-standard features, use the pre-patched SE versions.

HOW TO - Simply navigate to the required ttystem or PNDNavigator file and apply patch.

HOME DLL

If you are running a standard system, NOT an SE version, read this..

You can use this tool to patch Home DLL's.

HOW TO - Simply allow Home to download the emulator files/folder with 'Operate My Go' & then apply patch to the .dll file.

[ianmb17]

Can you patch home with dlls when you use navcore 8.3se on a go510 as mine keeps telling me to upgrade to 7.9 also if i try to operate my tomtom from home it says i have no maps

[rytenuff]

Can you patch home with dlls when you use navcore 8.3se on a go510 as mine keeps telling me to upgrade to 7.9 also if i try to operate my tomtom from home it says i have no maps

The complete patched HOME folder for 8.300 and others is Here (http://squidoogle.blogspot.com/2008/11/ready-made-folders.html)

[OrangeJuice]

Go here:

http://forum.gsmhosting.com/vbb/showpost.php?p=3951578&postcount=768 (http://forum.gsmhosting.com/vbb/showpost.php?p=3951578&postcount=768)

Hey. I have updated the TTsystem and put the dll in the right folder on my pc.

Whats the next step? When I put in an SD card with the cracked maps I just get an icon of an SD card with a big red cross on it?

Or can I just replace my map files with the 810.1940 maps I downloaded?

Many thanks for your help dude!

[tendriver]

Hey. I have updated the TTsystem and put the dll in the right folder on my pc.

Whats the next step? When I put in an SD card with the cracked maps I just get an icon of an SD card with a big red cross on it?

Or can I just replace my map files with the 810.1940 maps I downloaded?

Many thanks for your help dude!

8.10.1940 maps may not be compatible with Navcore 7.90. The latest maps are 8.15.

Go here for a map 8.15 & Navcore compatibility chart:

http://forum.gsmhosting.com/vbb/showpost.php?p=3951592&postcount=769 (http://forum.gsmhosting.com/vbb/showpost.php?p=3951592&postcount=769)

[joseph64]

Also the GPSfix's are downloadable as are the mapshares!!!
Works perfectly now.
Many thanks guys!!!!!!
Hi Piet,
How did you patch your HOME... and I mean step by step ?
I have upgraded my GO 910 to Nav 8.300 with maps 815.2003 and the TT works perfectly.
The only thing that still is complaining about wrong files is HOME.
I have changed the .dll for the 'fixed' one but home does not agree.
I basically only want ¡t for the GPS fix data and the Mapshare.
Cheers, joseph64

[tendriver]

Hi Piet,
How did you patch your HOME... and I mean step by step ?
I have upgraded my GO 910 to Nav 8.300 with maps 815.2003 and the TT works perfectly.
The only thing that still is complaining about wrong files is HOME.
I have changed the .dll for the 'fixed' one but home does not agree.
I basically only want ¡t for the GPS fix data and the Mapshare.
Cheers, joseph64


See rytenuff's post 1116 just above!!

[tendriver]

Now we need to know which version or what kind of a remote control we should buy if we want one? So, the original rc won't work with nc 8.xxx. I asked Tomtom if nc v8.xxx is coming for go910, but they said there aren't any interest to make that...for now. So if I want that rc, do I have to buy rc made for example for x20, x30 or x40 series? Which one will work with go910 with nc 8.204?

Juhani, ifyou are using nc v8.3xx, do you have any problems? (execpt rc)

And tendriver I had map w&ce 815.2003 and all is functioning just fine...even lane guidance pictures :D. And if I can fix this rc issue just buying new rc...I'm happy :)

UPDATE!!!

I saw this on another forum. I hope it helps ya.

Quote:
Originally Posted by XXXXXX
Hi,

My GO 510 has currently nc 8.051, new bluetooth remote control is perfectly working.
Some programs which need Touchscreen don't work, eg IRQ.
But they do work when using bluetooth remote control.

Does someone, using nc 8.204, has tested such same thing ?
I plan to upgrade my GO510 with nc 8.204, maps 815, and should like to have my bluetooth remote fully working.



REPLY.....
With navcore 8.204 : bluetooth remote works

[OrangeJuice]

8.10.1940 maps may not be compatible with Navcore 7.90. The latest maps are 8.15.

Go here for a map 8.15 & Navcore compatibility chart:

http://forum.gsmhosting.com/vbb/showpost.php?p=3951592&postcount=769 (http://forum.gsmhosting.com/vbb/showpost.php?p=3951592&postcount=769)


OK I have downloaded Western_Europe_1GB_815_2024 which looks like it is compatible. What is the best way to load these files on? Just copy and paste the files I have replacing the ones which were loaded on the tomtom originally? Thanks

[OrangeJuice]

Ran out of edit time - I replaced the files and it worked great. Im not running 815.2024.

If I want to add extra maps on SD card what do I do about that? Thanks so much for your help so far! Btw - how did you know where to find the patched navcore file? Would be good to know for future reference. Thanks

[tendriver]

Ran out of edit time - I replaced the files and it worked great. Im not running 815.2024.

If I want to add extra maps on SD card what do I do about that? Thanks so much for your help so far!

Just add the entire extra map folder to your SD card. To use it, on your TT, go to Change Preferences, Manage Map, Change Map and select the map you wish to use.

[tendriver]

Btw - how did you know where to find the patched navcore file? Would be good to know for future reference. Thanks

ALL answers are on this thread. You just have to search a little.

[OrangeJuice]

Just add the entire extra map folder to your SD card. To use it, on your TT, go to Change Preferences, Manage Map, Change Map and select the map you wish to use.

If I start the tomtom with the SD card inserted I get an animated image of a big X on an SD card.. the tomtom wont load with it in.

All thats on the SD card is Australia_815_2086. I think it did it without anything at all on the card as well.

Thanks :)

[tendriver]

If I start the tomtom with the SD card inserted I get an animated image of a big X on an SD card.. the tomtom wont load with it in.

All thats on the SD card is Australia_815_2086. I think it did it without anything at all on the card as well.

Thanks :)

Look on the bottom of your device and tell me the Model #. My GO720 is a 4M00.002. Also, what MB is your SD card?

[rytenuff]

If I start the tomtom with the SD card inserted I get an animated image of a big X on an SD card.. the tomtom wont load with it in.

All thats on the SD card is Australia_815_2086. I think it did it without anything at all on the card as well.

Thanks :)

Do you see the button at the bottom right marked, "Thanks"? Click on it occasionally wherever you get the stuff or help you need. You have taken links to Navcores, and maps without comment to these posters.
Tendriver has given a lot of help to you and you have said thanks but next to your username it says Thanks = 0. In the future it will appear like you don't bother to thank your helpers.
Tendriver doesn't mind, but some of us just look at the number of posts made, then the number of thanks and if there aren't any, we walk on by.
It takes much less time to click on, "Thanks" than it does to source the software and post links to it.

[turbo97se]

Hi folks I am relatively new to all of this. I have two PNAs :TT720 and TT730. I have successfully upgraded both units and tried a few different navcores (Thanks to tendriver and rtenuff's posts mostly). I have tried navcore 8.02, 8.204 and 8.320 - with patched TTSystem. I haven't played a huge amount with them but can see that the the best navcore seems to be 8.204 since it has more voice recognition options. I have installed NA 8_15_2019 and it works on all the navcores stated. I also installed UK_ROI 8_15_2003 - It seems to work but the speech recognition does not seem to work. I was wondering if anyone else has tried this? Am I missing or have corrupt files somewhere? The last piece I have installed is W&CE 8_15_2034. It does not appear to have Lane guidance or speech recognition enabled. Is there a map of W&CE that does have these features? What a great place for information this is! The info is a little hard to find in this thread but most of it is there! Thanks in advance!

[OrangeJuice]

Look on the bottom of your device and tell me the Model #. My GO720 is a 4M00.002. Also, what MB is your SD card?

Hey dude - I have clicked on 'Thanks' on all your posts your help has been really appreciated.

I have a model 4N00.005

The SD card im testing with is 128mb but I have just ordered a 2GB one.

Thanks again!

[tendriver]

Hey dude - I have clicked on 'Thanks' on all your posts your help has been really appreciated.

I have a model 4N00.005

The SD card im testing with is 128mb but I have just ordered a 2GB one.

Thanks again!

Thanx for the Thanx. Your TT is a TomTom One "New Edition"/"Second Edition" (Europe): 4N00.005. I suspected you had a wrong size SD card. The 2 GB ought to work for you.

[tendriver]

Hi folks I am relatively new to all of this. I have two PNAs :TT720 and TT730. I have successfully upgraded both units and tried a few different navcores (Thanks to tendriver and rtenuff's posts mostly). I have tried navcore 8.02, 8.204 and 8.320 - with patched TTSystem. I haven't played a huge amount with them but can see that the the best navcore seems to be 8.204 since it has more voice recognition options. I have installed NA 8_15_2019 and it works on all the navcores stated. I also installed UK_ROI 8_15_2003 - It seems to work but the speech recognition does not seem to work. I was wondering if anyone else has tried this? Am I missing or have corrupt files somewhere? The last piece I have installed is W&CE 8_15_2034. It does not appear to have Lane guidance or speech recognition enabled. Is there a map of W&CE that does have these features? What a great place for information this is! The info is a little hard to find in this thread but most of it is there! Thanks in advance!

Your UK&ROI might be bad. As for your W&CE, here is W&CE 8.15.2003.

815.2003 Western and Central Europe FULL

http://lix.in/-38b61c (http://www.anonym.to/?http://lix.in/-38b61c)
http://lix.in/-3a3cbd (http://www.anonym.to/?http://lix.in/-3a3cbd)
http://lix.in/-3bc35e (http://www.anonym.to/?http://lix.in/-3bc35e)
http://lix.in/-2e07bf (http://www.anonym.to/?http://lix.in/-2e07bf)
http://lix.in/-2f8e60 (http://www.anonym.to/?http://lix.in/-2f8e60)
http://lix.in/-329ba2 (http://www.anonym.to/?http://lix.in/-329ba2)
http://lix.in/-342243 (http://www.anonym.to/?http://lix.in/-342243)
http://lix.in/-35a8e4 (http://www.anonym.to/?http://lix.in/-35a8e4)
http://lix.in/-372f85 (http://www.anonym.to/?http://lix.in/-372f85)
http://lix.in/-38b626 (http://www.anonym.to/?http://lix.in/-38b626)
http://lix.in/-3a3cd1 (http://www.anonym.to/?http://lix.in/-3a3cd1)
http://lix.in/-3bc372 (http://www.anonym.to/?http://lix.in/-3bc372)
http://lix.in/-2e07d3 (http://www.anonym.to/?http://lix.in/-2e07d3)
http://lix.in/-2f8e74 (http://www.anonym.to/?http://lix.in/-2f8e74)
http://lix.in/-311515 (http://www.anonym.to/?http://lix.in/-311515)
http://lix.in/-329bb6 (http://www.anonym.to/?http://lix.in/-329bb6)
http://lix.in/-342257 (http://www.anonym.to/?http://lix.in/-342257)
http://lix.in/-35a8f8 (http://www.anonym.to/?http://lix.in/-35a8f8)
http://lix.in/-38b63a (http://www.anonym.to/?http://lix.in/-38b63a)

19x100MB

pass: Javiermb.com


Code:
; Western_and_Central_Europe_815_2003F1 12 49 87 97 17 D8 02 01 AC 1B 7E C2 5F 29 23 Western_and_Central_Europe-19.meta

[OrangeJuice]

Thanx for the Thanx. Your TT is a TomTom One "New Edition"/"Second Edition" (Europe): 4N00.005. I suspected you had a wrong size SD card. The 2 GB ought to work for you.


Is it right the TT cant read from internal memory and the SD card slot?

If that is the case then I will have to load all the files from the root of the TT onto the card (including my extra foreign maps) i'm guessing?

Cheers

[tendriver]

Is it right the TT cant read from internal memory and the SD card slot?

If that is the case then I will have to load all the files from the root of the TT onto the card (including my extra foreign maps) i'm guessing?

Cheers

NO!! TT will always read Internal Memory first!! Leave your Internal as it is. Just add additional maps to the SD card. To use the additional maps, in your TT, go to Change Preferences, Manage Map, Change Map and select the map you wish to use.
(http://forum.gsmhosting.com/vbb/report.php?p=4002408)

[rytenuff]

@turbo97se
"I have two PNAs :TT720 and TT730. I have successfully upgraded both units and tried a few different navcores (Thanks to tendriver and rtenuff's posts mostly). I have tried navcore 8.02, 8.204 and 8.320 - with patched TTSystem."
....and yet, thanks:0 ?
See the post directly before yours!

re. Speech recognition. You require a complete ASR folder in root. You need a file called support_asr.dat containing the numeral 1 in that folder. Your maps need to contain cspeech files. You may not get the mic icon in 8.204 if you have a "model" text in root.

[tendriver]

@turbo97se
"I have two PNAs :TT720 and TT730. I have successfully upgraded both units and tried a few different navcores (Thanks to tendriver and rtenuff's posts mostly). I have tried navcore 8.02, 8.204 and 8.320 - with patched TTSystem."
....and yet, thanks:0 ?
See the post directly before yours!

re. Speech recognition. You require a complete ASR folder in root. You need a file called support_asr.dat containing the numeral 1 in that folder. Your maps need to contain cspeech files. You may not get the mic icon in 8.204 if you have a "model" text in root.

It appeared to me that he has speech recognition with his NA 8.15 map, but not the other two. But, I've been wrong many times before.:cool:

[rytenuff]

@Orangejuice. "Hey dude - I have clicked on 'Thanks' on all your posts your help has been really appreciated"
Excellent! Now click on all the posts where you got the cracked Navcore, the patcher and all the maps.

[OrangeJuice]

NO!! TT will always read Internal Memory first!! Leave your Internal as it is. Just add additional maps to the SD card. To use the additional maps, in your TT, go to Change Preferences, Manage Map, Change Map and select the map you wish to use.


Thats interesting. Thanks very much :)


@Orangejuice. "Hey dude - I have clicked on 'Thanks' on all your posts your help has been really appreciated"
Excellent! Now click on all the posts where you got the cracked Navcore, the patcher and all the maps.


I did the navcore post but the patcher and maps came from a torrent site - I couldn't get crypt load to download more than 1 file from the links here. Cheers :)

[rytenuff]

It appeared to me that he has speech recognition with his NA 8.15 map, but not the other two. But, I've been wrong many times before.:cool:

I try to make my answers relevent for anyone reading it at a later date not only specific to the OP.
I should have added ....and a device capable of using speech recognition. i.e. one with a mic.

[Fire2104]

Thanks to all the great help on here I think I am all updated...here is what I have let me know...

go720
APP 8.320
Map North_America v815.2019


also my Verizon wireless Gzone will now connect to my 720 and work...before it would not....all featues including IQ routes are working fine so far....will be able to test more later


One more question....my TThome is updated and getting updates fine, when I check for updates it still shows the NA 665 map.......i just ignore it for now...any ideas?

[homeoffice2005]

Hi Guys,

Great Forum and all the help in the past.....My question is i have the patched tomtom v8 firmware and v8 patched maps on my tomtom 300, I have tried placing the speeding cameras into the map folder; too no avail...are the speed cameras not being seen cause I am using it on a patched map? Do I have to patch the speed cameras aswell?

Help will be much appreciated....

[tendriver]

Thanks to all the great help on here I think I am all updated...here is what I have let me know...

go720
APP 8.320
Map North_America v815.2019


also my Verizon wireless Gzone will now connect to my 720 and work...before it would not....all featues including IQ routes are working fine so far....will be able to test more later


One more question....my TThome is updated and getting updates fine, when I check for updates it still shows the NA 665 map.......i just ignore it for now...any ideas?

Confirm that you removed the entire NA 6.65 folder from your device or SD card. Does TT update also show NA 8.15?

[wannscan]

Hi Guys,

Great Forum and all the help in the past.....My question is i have the patched tomtom v8 firmware and v8 patched maps on my tomtom 300, I have tried placing the speeding cameras into the map folder; too no avail...are the speed cameras not being seen cause I am using it on a patched map? Do I have to patch the speed cameras aswell?

Help will be much appreciated....

Have a look on page 66 scroll down to #983 for cams from 18.12.08 .
Im not sure which Meta txt is correct but one from below did work for me...

1# If you copy the safety cam text below and open your (Easyusetools_for Keygen) folder.
2# open the folder named (Progs).
3# open the file named (meta) then paste in the text you have copied.
4# now copy the two files you must have for speed/safety cams and paste them in the folder named (insert_meta_from_Map_here).
5# now try the (RunMeforAllAutomatic), it should do the same for your camera files as it did for your maps by creating a DCT file in the (insert_meta_from_Map_here) folder.
6# copy the files from the (insert_meta_from_Map_here) folder into your map folder.

Now try your tomtom, you might need to press the tomtom services button then safety cameras, change warning preferences to adjust the desired warning sound you want. or under p.o.i you can do the same to change the sound . All depends on which cameras you have.
Good luck.

Meta txt below


; Safety_Cam_UK_TomTom_1359
93 67 0F 86 A8 B2 0E 69 14 52 A4 13 FE 61 6F 71 Safety_Cam_UK_TomTom.ov2

; Safety_Cam_UK_Premium_1546
E4 FE 0E 56 C9 74 91 BA EB DA 42 C4 B2 C7 D8 01 Safety_Cam_UK_Premium.ov2


; Safety_Cam_UK_TomTom_1757
93 67 0F 86 A8 B2 0E 69 14 52 A4 13 FE 61 6F 71 Safety_Cam_UK_TomTom.ov2

[Fire2104]

Confirm that you removed the entire NA 6.65 folder from your device or SD card. Does TT update also show NA 8.15?



no does not show NA 81.5 just 665..I am sure all folder it gone.....mine did habe guam which I have no need for should I delete that?




if I do what is on my TT then it does show 8.15

[tendriver]

no does not show NA 81.5 just 665..I am sure all folder it gone.....mine did habe guam which I have no need for should I delete that?




if I do what is on my TT then it does show 8.15

Certainly delete Guam, if you don't need it. Go into your TT Change Preferences, Manage Maps, Change Maps, and you can see what maps are still on your device. Or with your TT hooked to your puter, in windows explorer, you can open the drive for your TT to comfirm what map folders are still there.

[Fire2104]

Certainly delete Guam, if you don't need it. Go into your TT Change Preferences, Manage Maps, Change Maps, and you can see what maps are still on your device. Or with your TT hooked to your puter, in windows explorer, you can open the drive for your TT to comfirm what map folders are still there.



guam is gone.....only new map shows when I use TThome to see what is on it..and only new one when I explore....must be some thing some where showing old map but cannot find it yet

[homeoffice2005]

Thanks wannscan,

Tried the above with the speed cams downloaded from page 66, have got the safety cam showing in pois but not on the map.........


Installed on:

tomtom go 500

App8.010 (9369/080529) OS:3024

UK & Rep of ireland v815.2024

thanks in advance

[BuMobiles]

Thanks wannscan,

Tried the above with the speed cams downloaded from page 66, have got the safety cam showing in pois but not on the map.........


Installed on:

tomtom go 500

App8.010 (9369/080529) OS:3024

UK & Rep of ireland v815.2024

thanks in advance

you need to select which poi's are displayed, look at prefs, poi's, tick the poi's you are wanting to show :)

[tendriver]

you need to select which poi's are displayed, look at prefs, poi's, tick the poi's you are wanting to show :)


HAPPY NEW YEAR Bu!!!!!!

[pictopicto]

NO!! TT will always read Internal Memory first!! Leave your Internal as it is. Just add additional maps to the SD card. To use the additional maps, in your TT, go to Change Preferences, Manage Map, Change Map and select the map you wish to use.
(http://forum.gsmhosting.com/vbb/report.php?p=4002408)

Tendriver, are you sure that you are right on this one???

on my TT1XL if i put a memory card in it ignores the internal memory so to get it working i have to have the program on the SD card also.

What i have done is left original internal memory intact (so its all legal if i ever need it to be) and used updated navcores and maps on SD card.

[tendriver]

Do you see the button at the bottom right marked, "Thanks"? Click on it occasionally wherever you get the stuff or help you need. You have taken links to Navcores, and maps without comment to these posters.
Tendriver has given a lot of help to you and you have said thanks but next to your username it says Thanks = 0. In the future it will appear like you don't bother to thank your helpers.
Tendriver doesn't mind, but some of us just look at the number of posts made, then the number of thanks and if there aren't any, we walk on by.
It takes much less time to click on, "Thanks" than it does to source the software and post links to it.


HAPPY NEW YEAR rytenuff!!!!!!

[homeoffice2005]

Thanks BU but i have safety cam UK tomtom ticked still not showing up

thanks in advance

[BuMobiles]

HAPPY NEW YEAR Bu!!!!!!

it's a bit early but happy new year :D

[BuMobiles]

Thanks BU but i have safety cam UK tomtom ticked still not showing up

thanks in advance

please post the speed camera#s you have installed and we can test them ;)

[homeoffice2005]

Hi BU mobiles,
The speed cams where taken from pg 66 post 983......

I cant seem to upload the file


thanks again

[ayyaps]

Guys, I'm looking for TomTom v8 with latest Australia Map for WM6? I couldn't find one from this thread? Can anyone help me on this?

[tendriver]

Hi BU mobiles,
The speed cams where taken from pg 66 post 983......

I cant seem to upload the file


thanks again

Don't feel bad, very few can upload. I'm not one of them.

[tendriver]

Guys, I'm looking for TomTom v8 with latest Australia Map for WM6? I couldn't find one from this thread? Can anyone help me on this?

If you don't get an answer here, you might try here:

http://www.gpsunderground.com/forums/showthread.php?t=2978 (http://www.gpsunderground.com/forums/showthread.php?t=2978)

[BuMobiles]

Hi BU mobiles,
The speed cams where taken from pg 66 post 983......

I cant seem to upload the file


thanks again

you need to patch these safety cameras with the tomtom keygen

p.s make sure your meta.txt has the support for these speed cameras ;)

[turbo97se]

I have the CSPEECH folder in the root. I need to check on the ASR folder thing. In the UK_ROI map, the icon shows up for speech input but when I select it to input an address, it hangs saying something like " Map switched to UK please wait" and just gets stick there. Thanks for the Europe Map, It's not that easy to find good links on this thread since they get taken out so fast. BTW left THANKS for both Rytentsuff and tendriver! Didn't think I needed to leave something before I even posted anything.

It appeared to me that he has speech recognition with his NA 8.15 map, but not the other two. But, I've been wrong many times before.:cool:

[tendriver]

I have the CSPEECH folder in the root. I need to check on the ASR folder thing. In the UK_ROI map, the icon shows up for speech input but when I select it to input an address, it hangs saying something like " Map switched to UK please wait" and just gets stick there. Thanks for the Europe Map, It's not that easy to find good links on this thread since they get taken out so fast. BTW left THANKS for both Rytentsuff and tendriver! Didn't think I needed to leave something before I even posted anything.

Thanx for the Thanx. Feel free to hit the Thanks button anytime you see a post that you think deserves it. There isn't a CSPEECH folder. Only cspeech dats in your map folder. The ASR folder is in your TT root directory. If you open your TT with windows explorer, it is the second folder you will see after the art folder. There isn't one for each map. If you have voice recognition on one map, then you have what you need. There is something else amiss.

[turbo97se]

Hi tendriver

Thanks again! Actually, the version I had downloaded DID have a seperate CSPEECH folder(not sure why). In it were two CSPEECH.DAT files - cspeech_GBR.dat and cspeech_IRL.dat. The same two filenames existed in the map directory too but were of zero byte file size. Once I copied the valid ones across(from CSPEECH to map directory), everything worked perfectly! I am really doing this for my dad ...so my dad says thanks to you as well :D. Now I just need to download the Central and Western Europe ones you posted. It's taking forever since I don't have premium account. Hope I get them before the links go bad!

There isn't a CSPEECH folder. Only cspeech dats in your map folder. The ASR folder is in your TT root directory. If you open your TT with windows explorer, it is the second folder you will see after the art folder. There isn't one for each map. If you have voice recognition on one map, then you have what you need. There is something else amiss.

[homeoffice2005]

Im not sure if the meta text in wannscan post is correct, can anyone provide latest speed cams+ meta text.

thanks in advance

[ayyaps]

If you don't get an answer here, you might try here:

http://www.gpsunderground.com/forums/showthread.php?t=2978 (http://www.gpsunderground.com/forums/showthread.php?t=2978)


I have tried there, but couldnt find the right version for WM6, TOMTOM software & latest Australia map... :(

[wannscan]

Im not sure if the meta text in wannscan post is correct, can anyone provide latest speed cams+ meta text.

thanks in advance

Sorry it hasn`t yet worked mate.
After reading your message i re-run this Meta txt below with the safety cams from the 18.12.08 and it created a working DCT file.

; Alps_plus_major_roads_of_WE_710_1571
42 86 50 AE 47 42 F7 B3 6F 88 E4 5C 06 90 A4 1D Alps_plus_major_roads_of_WE-8.meta
; Alps_plus_major_roads_of_WE_810_1907
14 4F 50 E4 0E 0D 4D FA 85 F8 46 42 F6 46 88 C2 Alps_plus_major_roads_of_WE-15.meta
; Alps_plus_major_roads_of_WE_815_2003
C9 69 41 38 43 AA 22 C4 DD C1 38 C1 08 29 47 22 Alps_plus_major_roads_of_WE-19.meta
; Athina_715_1732
D7 94 FB 21 80 E1 EB CA 4F FC 95 0B 37 30 FC C4 Athina-9.meta
; Australia_700.1491
EF B1 CC EC D8 08 84 89 F5 23 75 F9 71 6B B4 11 Australia-4.meta
;Australia_705.1485
89 28 65 37 B9 5A 28 54 DA 9F A2 9F 74 96 B5 2D Australia-6.meta
; Australia_720_1838
85 8E 4B 8C 84 58 8E 6C DD F2 64 EB 96 1D 9B AB Australia-14.meta
; Australia_815_2057
60 AB C9 B7 65 B2 7B 7A AA 11 B2 B6 D8 8A EA D8 Australia-19.meta
; Australia_815_2059
50 FD 71 5A 08 E7 76 4E CE EB 65 58 D0 EA BD 9B Australia-21.meta
; Australia_815.2086
D2 6E 6D 95 0B 1C 1A 85 6C D3 95 DA C3 14 65 33 Australia-22.meta
; Benelux_705_1485
96 AE 3F 78 E3 77 3F B8 4F 09 AE 1D C2 BF A2 12 Benelux-6.meta
; Benelux_710_1561
77 14 C1 18 C1 9A E7 F7 68 B3 58 C4 68 71 A4 DF Benelux-7.meta
; Benelux 710.1571
30 F8 D8 63 4A 67 16 CB CA 59 4F 5E 7D F0 87 4A Benelux-8.meta
; Benelux_715_1689
6B C6 A2 C8 4E DA ED 4D 49 7A 01 FC 30 E5 97 C8 Benelux-10.meta
; Benelux_720_1802
B1 BA 38 FA 0C C1 B7 1E 52 0A 80 E8 C7 17 B7 15 Benelux-14.meta
; Benelux_725_1883
98 07 82 EC 68 A2 A3 96 55 D7 A4 D4 82 74 D8 CA Benelux-17.meta
; Benelux_815_2023
EA 5F 41 B2 7C 6B 03 07 48 DE 61 D2 0D 07 44 6C Benelux-21.meta
; Benelux_815_2024
BF 2B 63 CC 3C 77 8A 7A B4 2E 80 1B CF 85 96 A1 Benelux-22.meta
; Berlin_715_1732
3B A1 93 31 DE 9D 2B 49 1A CB 8B 26 CE 75 67 F6 Berlin-9.meta
; Birmingham_715_1732
BA 25 7B F9 4F C7 95 A6 0B 77 5B E5 23 48 C4 06 Birmingham-9.meta
; Brazil_710_1628
85 F5 EC FD 64 55 3C 11 A7 A6 EF 3D 6E 67 8D 78 Brazil-7.meta
; Brazil_720_1857
BA 78 0F 0C 20 60 29 20 EB C9 F1 42 CA 33 2E D7 Brazil-14.meta
; Brazil_815_2095
D5 FE 06 94 1D 82 E8 E6 68 81 32 15 77 3C 0D 19 Brazil-23.meta
; Canary_Islands_705_1480
3C DB 2D AC 0F F4 FF CE B5 4C 0E 86 DD 14 35 BA Canary_Islands-5.meta
; Central_and_Eastern_Europe_710_1567
21 9F E8 C0 EE D1 C6 91 DD 0F B0 BE 00 73 3B F9 Central_and_Eastern_Europe-7.meta
; Central_and_Eastern_Europe_715_1689
20 84 C7 3B 3E 4F 40 8E 7E A8 A3 5F 6A 71 AF F5 Central_and_Eastern_Europe-10.meta
; Central_and_Eastern_Europe_805_1801
EE C8 DF 50 3E B7 26 B8 F8 06 AE C8 7A 35 64 5A Central_and_Eastern_Europe-12.meta
; Central_and_Eastern_Europe v720.1802
F1 82 60 BC AD 4A 78 68 D0 F2 4D 49 AF 78 69 0F Central_and_Eastern_Europe-14.meta
; Central_and_Eastern_Europe_810_1887
F6 61 F5 2C 22 CF 75 10 6F A3 69 31 41 03 68 58 Central_and_Eastern_Europe-15.meta
; Central_and_Eastern_Europe_815_2003
7E 5E 76 7C DE 38 51 E5 AE 43 09 49 D0 ED C0 A8 Central_and_Eastern_Europe-19.meta
; DE_AT_CH_710_1561
FA 18 38 54 50 CB C3 7B 5C 28 4F 5D 63 CD C3 1F DE_AT_CH-7.meta
; DE_AT_CH_710_1571
29 EA ED 97 92 60 56 38 86 E6 05 D4 F8 F6 C0 67 DE_AT_CH-8.meta
; DE_AT_CH_715_1703
B6 D0 5E 6B CA CE EC F5 41 4B 19 86 63 32 D8 74 DE_AT_CH-9.meta
; DE_AT_CH_715_1689
FC 00 57 A6 CB 93 0B 27 D7 B2 92 6E 27 06 F9 20 DE_AT_CH-10.meta
; DE_AT_CH_805_1801
98 89 1F 0C 1A 6D 53 3C D0 3A 26 C2 C8 8C DB 18 DE_AT_CH-12.meta
; DE_AT_CH_720_1803
ED 18 EC 61 26 80 9E 07 37 F3 C2 D5 4F BF 04 74 DE_AT_CH-13.meta
; DE_AT_CH_810_1870
97 43 5A DF AC 57 A1 1A 39 E6 91 54 80 71 48 A3 DE_AT_CH-15.meta
; DE_AT_CH_725_1871
E6 3B E2 3F DD D7 01 98 EB 43 47 C5 51 8E 19 10 DE_AT_CH-17.meta
; DE_AT_CH_815_2003
D0 39 B1 21 34 11 27 96 20 68 B2 7E 9C D7 0C 2F DE_AT_CH-19.meta
; DE_AT_CH_815_2024
40 22 3C A1 B4 9F C1 70 6D 6B 53 92 F5 B6 8E 89 DE_AT_CH-22.meta
; DE_AT_CH_and_Eastern_Europe_715_1753
7A BF B1 FB DA 0A 90 18 F0 EA 88 25 09 CD 80 7C DE_AT_CH_and_Eastern_Europe-10.meta
; DE_AT_CH_and_Eastern_Europe_720_1802
8F 93 7E 41 C4 82 98 05 EE 73 3F BB AE 76 37 B1 DE_AT_CH_and_Eastern_Europe-14.meta
; DE_AT_CH_and_Eastern_Europe_725_1905
0E 82 E1 04 63 C6 07 5C A6 44 29 DA 35 28 75 AC DE_AT_CH_and_Eastern_Europe-17.meta
; DE_AT_CH_and_Eastern_Europe_815_2024
4C 69 9C 1C 4E 6A 9F B3 60 7B 62 E8 0B B4 43 64 DE_AT_CH_and_Eastern_Europe-22.meta
; Eastern_Europe_705_1480
22 BD 73 5E A6 85 59 83 97 C2 C8 1B 7B 81 5C B5 Eastern_Europe-5.meta
; Eastern_Europe_710_1561
BD 4F 75 69 E0 68 55 9A C7 7D 41 5B BD A8 4B 61 Eastern_Europe-7.meta
; Eastern_Europe_710_1571
A8 92 EE 0A AB 65 47 A5 41 70 DF 7A FE A6 BA 4F Eastern_Europe-8.meta
; Eastern_Europe_715_1689
42 EE E3 41 9F D0 D9 FC 4E D4 61 C8 46 F5 55 B1 Eastern_Europe-10.meta
; Eastern_Europe_805_1801
4E A8 47 CB 19 6E 6E 86 DE A2 CE 8B B6 25 15 E7 Eastern_Europe-12.meta
; Eastern_Europe_720_1803
94 C4 A8 9A ED FD 5D C1 D8 EB 4A 3D 08 01 45 2E Eastern_Europe-13.meta
; Eastern_Europe_725_1883
19 7D A0 D9 F4 60 94 99 02 CB 12 F0 E3 B8 CA 58 Eastern_Europe-17.meta
; Eastern_Europe_815_2003
3A 3C 42 91 AB 2A 4E 21 D9 CF C1 05 FB CD 77 DA Eastern_Europe-19.meta
; Eastern_Europe_815_2023
2D 84 2C 2C 87 07 AD 05 2D 90 3D 13 0E 99 5F 3A Eastern_Europe-21.meta
; France_705_1480
47 FC 5E E9 D0 D7 96 98 16 2D 35 E3 E8 D5 4B E1 France-5.meta
; France_705_1485
86 E4 8A 3E F8 83 8C B1 26 A7 AC AE 66 CB C0 60 France-6.meta
; France_710_1561
65 0D 7E C5 F2 07 37 F1 4C 89 E7 B5 47 AF 79 FC France-7.meta
; France_710_1571
4A 3E 9E 19 58 DF 07 A0 62 79 07 EC A0 5B 60 00 France-8.meta
; France_720_1803
38 D6 B5 8A C4 70 BB 09 27 77 46 A7 5D 58 03 95 France-13.meta
; France_720_1802
CD B4 5B F8 26 4F 9D 06 3B D4 C2 60 EB 63 4E CD France-14.meta
; France_810_1887
E0 15 C5 67 25 1D 91 32 14 0A 81 43 3E 63 1E 1A France-15.meta
; France_725_1871
07 87 02 4F 4F 1E FB 81 EA 3E EE 8C D1 9F F1 F3 France-17.meta
; France_815_2003
FE FF 82 00 82 A5 30 7C EE D2 33 0B 6D 36 D9 DB France-19.meta
; France_815_2024
EB C0 A0 1E 98 FC 67 EA FF 13 D5 49 BD 47 91 FC France-22.meta
; France_Alps_715_1729
D0 5B 9E 45 62 1E D1 09 D5 36 82 BD CF 5F B2 5E France_Alps-10.meta
; Greece_815_2081
8A 70 77 54 16 3B E8 6F 12 EF 02 69 D1 D6 58 08 Greece-22.meta
; Guam_710_1575
70 D8 00 D4 CD 22 8A 59 BC CE 60 89 EE 27 B9 9D Guam-7.meta
; Guam_710_1576
A6 35 20 69 2E 7A 02 CC F0 61 F9 4A 56 F5 0A F0 Guam-8.meta
; Hong_Kong_720_1820
99 CE A0 93 D7 51 5E CA 4C 99 84 A7 14 15 7A 76 Hong_Kong-14.meta
; Iberia_705_1480
D2 0E 7B 8E FD 87 2E 59 3B F9 70 7A DE A7 1B 1B Iberia-5.meta
; Iberia_705_1485
51 2C F8 4D 99 E7 3D FF E4 FD B6 DF E3 E4 B9 CE Iberia-6.meta
; Iberia_710_1561
75 C3 D5 86 54 80 E3 C6 13 7E 7C B5 10 1E 4C 39 Iberia-7.meta
; Iberia 710_1571
E7 68 42 09 15 48 F1 82 6D FC 55 1C EA AC 8F A7 Iberia-8.meta
; Iberia 715_1703
E3 70 1E EC 64 7D 4E 88 AB 3B 87 77 D8 89 09 F9 Iberia-9.meta
; Iberia_715_1689
2A 7F C9 8E D8 50 31 49 EC 85 6B CA A6 E1 F9 8D Iberia-10.meta
; Iberia_800_1727
E8 71 0F ED 44 ED B0 9A 4C 91 3E 37 3E 11 C0 D5 Iberia-11.meta
; Iberia_805_1801
84 34 A2 48 CD 59 2B FE 50 AC D0 08 C3 1D D2 F1 Iberia-12.meta
; Iberia_720_1803
34 6D B9 6B 24 B0 0A 66 1A 5B 36 79 F5 C8 CA D3 Iberia-13.meta
; Iberia_720_1802
CA 47 8B 11 13 2B 22 E1 D4 DF 50 6C 4F 55 A3 E7 Iberia-14.meta
; Iberia_810_1870
83 EE 20 17 C6 0C 2D F4 8F C0 33 54 85 65 14 CE Iberia-15.meta
; Iberia_725_1883
57 4D 98 86 87 E5 40 D7 81 9D BB A2 2A 99 91 F5 Iberia-17.meta
; Iberia_815_2003
2D F7 07 42 BF D3 8F AE E6 C2 7E 8D E6 C1 C3 D5 Iberia-19.meta
;Iberia_815_2023
25 F7 B5 07 EC 09 BD 88 95 14 06 FE D7 B4 2D 48 Iberia-21.meta
; Iberia_815_2024
A3 35 47 EA FD 4E 34 A0 BE 4B 3E F5 B9 8A 63 67 Iberia-22.meta
; Istanbul_715_1732
A1 E9 19 19 C1 C3 47 86 B1 5F 2D 8D A5 EA 82 D3 Istanbul-9.meta
; Italia_705_1480
96 7D E5 11 19 BE E7 D9 79 DC 8D 78 EC AA 5D 3F Italia-5.meta
; Italia_710_1561
23 F8 7E 21 16 61 22 04 60 7B 1F 5A 6B F4 41 B5 Italia-7.meta
; Italia_710_1571
39 33 12 2F 07 EB 7F DE E9 FF 13 6C 4E 72 62 3F Italia-8.meta
; Italia_715_1689
F6 A0 6A 6B F9 DB C5 7B 7A 37 7B 42 87 CE D2 23 Italia-10.meta
; Italia_805_1801
58 C4 20 76 86 21 75 7A 82 A1 22 98 63 FE 4B 37 Italia-12.meta
; Italia_720_1803
C9 26 E3 EB 87 8E 12 BA 49 6C 50 DE 72 AD D2 55 Italia-13.meta
; Italia_720_1802
54 BA F9 C0 22 C6 1C A4 DD 04 E8 58 F6 B7 47 59 Italia-14.meta
; Italia_810_1887
8F 24 6E BB 1B FD C6 55 75 A9 55 D4 D8 F0 36 13 Italia-15.meta
; Italia_725_1871
D6 DF 00 FB AA B7 74 02 30 47 5A 95 2A BC F5 42 Italia-17.meta
; Italia_815_2003
01 ED 31 2B 02 DE 6B C8 5F 7F D0 89 FE 45 AC 2E Italia-19.meta
; Italia 815_2024
EA 42 5B 78 D5 49 74 31 A3 8C 62 8D 51 CF 5C 6B Italia-22.meta
; Kobenhavn_715_1732
CE EF 7A BA CA C5 73 EE C2 0E 36 B0 37 34 8C FC Kobenhavn-9.meta
; Madrid_715_1732
0A A7 CC FE D4 5F C0 C7 32 8F 28 91 6D 88 DD BF Madrid-9.meta
; Moskva_715_1732
4F 4D 6E F1 A7 8A 9F 11 42 0C A1 CD 25 AF F6 E0 Moskva-9.meta
; New_York_NY_715_1732
72 78 DB 37 83 23 60 09 4F 27 46 D7 C8 69 97 E6 New_York_NY-9.meta
; New_Zealand_710_1568 - New_Zealand_711_1692
89 6D 8F 1F DA 68 C5 EE 19 F2 C0 8E 37 BA 45 23 New_Zealand-6.meta
; New_Zealand_725_1885
DE 21 9E A1 45 D6 20 7E 4B A6 7E 5B DF B1 6A 9B New_Zealand-14.meta
; New_Zealand_815_2064 - New_Zealand_730_1990
2D CD B8 9B DB DC 73 71 46 1A D7 0A 79 AA B8 DC New_Zealand-19.meta
; North_America_2GB_705_1481
90 A9 55 BA 4C CA 8F 0F BE BA 2F 40 9B 86 3E 61 North_America_2GB-5.meta
; North_America_2GB_710_1584
26 C6 D0 27 03 10 8B AE E0 57 99 A0 01 BD 88 34 North_America_2GB-7.meta
; North_America_710_1609
CE A1 0B BA 50 23 8F A6 1C 0E 1E FB 99 AD A4 71 North_America-7.meta
; North_America_710_1576
6F F4 B2 5E BE 64 BC 7E B1 CB 4F 81 21 0E C7 28 North_America-8.meta
; North_America_2GB_715_1712
84 CF 0B B2 35 FA 62 F1 FE 27 00 DF 54 57 E5 00 North_America_2GB-9.meta
; North_America_800_1762
6B 9D 93 44 9C F7 72 60 F6 B7 A8 1B 93 D4 62 05 North_America-11.meta
; North_America_805_1801
A9 DC 71 FF A1 9E 34 91 63 45 F1 5B EE ED 75 AE North_America-12.meta
; North_America_805_1801
7A 55 3D 7A DF 48 71 90 D4 CC 25 74 3B 73 7F 30 North_America_2GB-12.meta
; North_America_720.1803
6E EC A6 E6 BD 5B 4C 8E 1A 01 F6 55 88 D0 B4 81 North_America-13.meta
; North_America_810_1907
E0 30 FA B1 C7 A7 65 FD 91 EF 13 A2 87 FB FC 46 North_America-15.meta
; North_America_725_1906
03 E1 1C CF 25 33 66 46 C4 F1 22 85 D0 FB 74 A9 North_America-16.meta
; North_America_815_2019
10 F4 DA DE 4F BC 35 BD A8 A9 B1 3B 34 FC 2D 9B North_America-19.meta
; Oslo_715_1732
F9 17 5F 0A 44 E8 11 9C 8E F8 61 C5 ED 8F 3D 57 Oslo-9.meta
; Portugal_710_1600
90 C1 AF 81 B2 68 60 D3 4D 85 BC C1 78 4A 21 2C Portugal-8.meta
; Russia_Baltics_Finland_815_2080
92 C9 DD F8 B0 AA 89 E0 9B D5 B1 A1 FE D8 EE C6 Russia_Baltics_Finland-19.meta
; Sankt_Peterburg_715_1732
53 2E 35 77 12 A1 93 42 37 C6 E9 80 37 51 0B B5 Sankt-Peterburg-9.meta
; Scandinavia_710_1561
EC 73 85 9D C4 C7 A8 49 65 F7 F2 64 79 45 30 E5 Scandinavia-7.meta
; Scandinavia v715.1689
25 7E 7A BE 88 FC 06 25 01 52 65 D7 3A 54 23 05 Scandinavia-10.meta
; Scandinavia_805_1801
00 BD 02 CF 46 C2 CF 48 07 6F AD 9A 9A AC CD 8D Scandinavia-12.meta
; Scandinavia_720_1803
E6 5C E8 C1 A7 41 AB A4 07 9D 39 51 E5 7C DB DC Scandinavia-13.meta
; Scandinavia_720_1802
D6 2F 36 ED 1A 5B 3B 0B 15 54 1E 0F D8 45 EA A1 Scandinavia-14.meta
; Scandinavia_810_1907
7D 23 96 0C 14 A3 43 2B B3 DF 53 24 1E 28 5F 93 Scandinavia-15.meta
; Scandinavia_815_2003
9F D1 CB 46 AC 7C D5 A9 71 7C 54 F3 29 D6 E2 0F Scandinavia-19.meta
; Singapore_720_1820
71 CC 22 8B CD 89 20 AE 7D CF 9D DE 4A D1 3E B0 Singapore-14.meta
; Southern_Africa_705_1513
A7 8C 40 41 B7 E0 12 31 49 0C 24 E5 B0 AD BA 6D Southern_Africa-4.meta
; Southern_Africa_720_1862
48 81 9C 2A 4C 76 99 43 A9 87 EF 0F 65 A9 FC EA Southern_Africa-14.meta
; Southern_Africa_730_2001
9C 80 86 B3 D1 D7 B2 06 FC EA F9 97 FC 3D 32 E4 Southern_Africa-19.meta
; Southern_Europe_710_1601
F9 19 5B 1B E7 17 CD DF 66 65 11 E0 FD C4 93 B3 Southern_Europe-7.meta
; Southern_Europe_725_1947
E9 58 5F 8D 2D 59 BD F9 61 2A D9 70 47 B5 21 98 Southern_Europe-17.meta
; Spain_710_1600
72 54 A0 4A 05 A6 6B 0E 12 89 A1 06 EC 3F 86 CE Spain-8.meta
; Taiwan_75*_012
37 3B 64 5B 0D A5 BC 8B A4 87 9B A5 A2 41 CC 76 Taiwan-6.meta
; Turkey_725_1895
C7 F3 AB 70 25 C8 F8 F0 68 74 9F C2 AE 53 DA 6C Turkey-17.meta
; Turkey_815_2033
82 E2 3C 6F 24 81 E3 19 C7 42 12 AC 15 AF 1E 29 Turkey-22.meta
; United_Kingdom_and_Republic_of_Ireland_705_1480
AB CB C9 DD 4B BF D6 DF B1 78 B1 76 64 F0 74 73 United_Kingdom_and_Republic_of_Ireland-5.meta
; United_Kingdom_and_Republic_of_Ireland_710_1561
AC 39 62 8A 43 E8 49 25 BD 50 87 A0 5F EA 4B 5F United_Kingdom_and_Republic_of_Ireland-7.meta
; United_Kingdom_and_Republic_of_Ireland_710_1571
66 17 D1 DD 1B 1B 7A EB 64 D6 71 6A 0B FB 93 69 United_Kingdom_and_Republic_of_Ireland-8.meta
; United_Kingdom_and_Republic_of_Ireland_715_1703
4D 3E 59 F6 9B B6 F9 9E 87 0B FF 17 04 C0 FD DE United_Kingdom_and_Republic_of_Ireland-9.meta
; United_Kingdom_and_Republic_of_Ireland_715_1689
73 EC 84 5C 85 B3 81 DE C5 94 87 31 3C AE C9 9C United_Kingdom_and_Republic_of_Ireland-10.meta
; United_Kingdom_and_Republic_of_Ireland_805_1801
6B 9C 40 E8 5D E2 D4 C6 E2 7B FB D1 7D 85 03 25 United_Kingdom_and_Republic_of_Ireland-12.meta
; United_Kingdom_and_Republic_of_Ireland_720_1803
2D 4C 82 B2 2A 0B D7 4B 5B 3E 89 5B 3B AD 89 2B United_Kingdom_and_Republic_of_Ireland-13.meta
; United_Kingdom_and_Republic_of_Ireland_720_1802
C7 16 B0 34 D5 48 E4 A3 BD E8 74 BF 7E 96 8C D2 United_Kingdom_and_Republic_of_Ireland-14.meta
; United_Kingdom_and_Republic_of_Ireland_810_1870
75 5E 91 B6 3F 6E 88 DD 13 05 19 31 03 84 DF 47 United_Kingdom_and_Republic_of_Ireland-15.meta
; United_Kingdom_and_Republic_of_Ireland_725_1871
3E BF B6 52 66 53 EC E2 F2 25 BB A7 B1 26 7B 15 United_Kingdom_and_Republic_of_Ireland-17.meta
; United_Kingdom_and_Republic_of_Ireland_810_1934
02 46 E0 C3 E6 18 FB C4 0C 00 54 B8 92 A2 D4 67 United_Kingdom_and_Republic_of_Ireland-18.meta
; United_Kingdom_and_Republic_of_Ireland_815_2003
95 F1 51 94 11 88 C5 54 DA 32 CE 7A 80 04 89 DB United_Kingdom_and_Republic_of_Ireland-19.meta
; United_Kingdom_and_Republic_of_Ireland_815_2024
10 79 41 4E A9 25 D2 45 E9 96 D7 9C 55 35 8F EF United_Kingdom_and_Republic_of_Ireland-22.meta
; US_-_Southeast_Region_710_1583
5E CD E6 EA 41 AC 48 ED 88 1B 78 6D A0 3B 28 5F US_-_Southeast_Region-8.meta
; US_-_Midwest_Region_710_1583
46 92 33 84 23 BF 7A 53 FC 2C 94 C8 07 D0 9E 84 US_-_Midwest_Region-8.meta
; US_-_Western_Region_720_1802
CB 73 94 2C E3 F8 2C D8 15 B2 E0 22 BC 6A 21 F0 US_-_Western_Region-14.meta
; USA_and_Canada 710_1575
3A 4E 0F 5A 4A DC E7 81 9F 84 FF 69 52 86 11 C4 USA_and_Canada-7.meta
; USA_and_Canada_715_1712
2C 5D 70 95 4C 37 A8 D7 0E 84 41 0A A0 F8 A6 4B USA_and_Canada-9.meta
; USA_and_Canada_720_1802
AB 26 81 FB B9 E5 82 D4 BE 4D 14 92 B5 A4 F4 4C USA_and_Canada-14.meta
; USA_and_Canada_725_1905
A1 13 E6 D2 CB 29 47 A1 2C C5 AE B1 1D 73 F8 A2 USA_and_Canada-17.meta
; USA_and_Canada_815_2022
CD 3C 9F E1 26 08 5B 3B 46 3C 89 E2 30 EB 1F 97 USA_and_Canada-22.meta
; Valencia_715_1732
B9 63 CF 17 02 61 84 CC 33 94 BD B7 57 71 9F BE Valencia-9.meta
; Western_Europe_705_1480
F2 63 E3 07 9D 5B 56 B8 B3 50 83 66 C1 F2 1E BF Western_Europe-5.meta
; Western_Europe_710_1561
A9 46 03 1D 35 78 4B 35 9D BD 4F C4 A6 A0 AA 5B Western_Europe-7.meta
; Western_Europe_1GB_710_1561
1E 54 2B 81 5A 58 8C EB E9 B8 30 09 44 D6 77 18 Western_Europe_1GB-7.meta
; Western_Europe 715.1703
49 8C 09 1D EC 44 90 C6 B8 B4 41 8C 4F 38 C9 96 Western_Europe-9.meta
; Western_Europe_1GB_715_1689
E8 65 48 F1 A8 C7 31 02 2C 4B D0 25 BC 85 94 2C Western_Europe_1GB-10.meta
; Western_Europe_720_1803
30 54 AB E3 28 41 6B 64 2F EA 41 86 1E 08 91 CC Western_Europe-13.meta
; Western_Europe_1GB_720_1802
8D 46 FD 55 9D 47 53 1C 71 EF 31 8F 80 01 9F 71 Western_Europe_1GB-14.meta
; Western_Europe_810_1907
E8 4C 42 3B DF C2 31 7C E3 99 E1 EB E2 6A EB EF Western_Europe-15.meta
; Western_Europe_1GB_725_1905
97 66 99 C8 BC 20 5B E7 C8 73 6A C7 94 D0 BE 5A Western_Europe_1GB-17.meta
; Western_Europe_815_2003
7F 7D B0 85 C7 83 B0 C5 B5 04 07 6D 29 96 F3 7B Western_Europe-19.meta
; Western_Europe_1GB_815_2024
AF 48 C5 65 63 16 4D 99 A9 9F CA 85 86 8D 36 D0 Western_Europe_1GB-22.meta
; Western_and_Central_Europe_710_1561
3A F6 54 9C E8 31 4D D0 0C D5 4B 5F E2 47 CD F3 Western_and_Central_Europe-7.meta
; Western_and_Central_Europe_2GB_710_1677
25 E2 2A 76 C7 21 FF 0C 04 1B AE F0 08 02 3E 20 Western_and_Central_Europe_2GB-7.meta
; Western_and_Central_Europe v710.1576
03 05 11 EE A9 27 6C EE 14 97 40 37 40 38 FB BA Western_and_Central_Europe-8.meta
; Western_and_Central_Europe 715.1703
C5 C1 B9 CF 16 15 FB 8F D6 D9 82 27 2C EA BE D0 Western_and_Central_Europe-9.meta
; Western_and_Central_Europe_800_17*
F5 2D 75 0E 0F E4 21 C4 26 30 EF B2 FF AC 7C 0F Western_and_Central_Europe-11.meta
; Western_and_Central_Europe_2GB_800_1766
12 59 24 46 40 A2 BB CC 46 B3 3C 97 81 BB AB 84 Western_and_Central_Europe_2GB-11.meta
; Western_and_Central_Europe_805_1801
F8 0F CA A3 EE F4 34 D0 EE 91 D4 89 84 5C 3D 0E Western_and_Central_Europe-12.meta
; Western_and_Central_Europe_2GB_805_1801
FC DE 1D AD AB C5 A5 A8 85 4A B7 58 9F 3F D1 CE Western_and_Central_Europe_2GB-12.meta
; Western_and_Central_Europe_720_1803
8D 35 11 55 50 52 CA EF 7E 9D 16 BC EC 22 FF AB Western_and_Central_Europe-13.meta
; Western_and_Central_Europe_2GB_720_1802
6A 49 F6 58 0C 58 08 9E 7F 43 60 4C 22 4F 33 47 Western_and_Central_Europe_2GB-14.meta
; Western_and_Central_Europe_810_1907
50 A7 83 63 D7 EA 14 09 82 D3 DB 89 5E 42 E4 3A Western_and_Central_Europe-15.meta
; Western_and_Central_Europe_2GB_810_1940
FE 97 1C A9 15 31 1B 62 65 E1 EC AB B9 6F 6E EC Western_and_Central_Europe_2GB-15.meta
; Western_and_Central_Europe_725_1906
59 B2 8C 53 40 F3 20 D9 30 5D 84 34 A7 07 DC 97 Western_and_Central_Europe-16.meta
; Western_and_Central_Europe_2GB_725_1981
27 42 2B 41 BB 80 D4 CC 84 E5 20 A7 80 DF 39 B8 Western_and_Central_Europe_2GB-17.meta
; Western_and_Central_Europe_815_2003
F1 12 49 87 97 17 D8 02 01 AC 1B 7E C2 5F 29 23 Western_and_Central_Europe-19.meta
; Western_and_Central_Europe_2GB_815_2003
26 9B F1 04 82 0E 95 28 E5 CF 02 F7 D4 3C 2C 42 Western_and_Central_Europe_2GB-19.meta
; Western_and_Central_Europe_815_2023
76 B3 CC 96 2B 38 86 23 9A FA 24 4A 91 43 FD 94 Western_and_Central_Europe-21.meta
; Western_and_Central_Europe_2GB_815_2034
CC 93 89 28 2D 2D 95 78 D7 CA DA B9 76 6F A6 B1 Western_and_Central_Europe_2GB-22.meta

; Autovelox_IT_TomTom
20 23 A0 51 07 F9 6F FA 07 35 CF BB 03 A2 59 76 Autovelox_IT_TomTom.ov2
; Blitzer_AT_TomTom
3C 6B 7C B4 74 60 1E 85 65 6D CA 10 81 A6 85 EB Blitzer_AT_TomTom.ov2
; Blitzer_CZ_TomTom
E0 9C BB 1F 0A B1 8F E1 D1 3D A2 97 D0 77 BC 72 Blitzer_CZ_TomTom.ov2
; Blitzer_DE_TomTom
50 D2 AA 5A E9 95 66 14 F2 9D 41 C2 1B 28 AA 65 Blitzer_DE_TomTom.ov2
; Fartkamera_SE_TomTom
36 AE 4F 79 0A 4F 98 27 9B 6E B0 C2 14 76 43 EA Fartkamera_SE_TomTom.ov2
; Fartsboks_NO_TomTom
32 DE 94 B5 A2 C5 65 08 04 0E E9 27 94 44 01 0E Fartsboks_NO_TomTom.ov2
; Flitspaal_NL_TomTom
07 26 5E F7 1D A7 A5 AB 99 72 AE AB C7 20 B2 05 Flitspaal_NL_TomTom.ov2
; Kamerat_FI_TomTom
86 09 AC 96 64 CD 6B D1 E0 E8 B4 49 D6 5F 12 0F Kamerat_FI_TomTom.ov2
; Radar_BE_TomTom
4B DB D9 E3 B6 76 84 D9 A3 D3 E7 47 41 62 E9 DF Radar_BE_TomTom.ov2
; Radar_ES_TomTom
05 1D 83 BC A1 99 B0 6F C7 C6 18 78 1E CC 52 91 Radar_ES_TomTom.ov2
; Radar_FR_TomTom
23 70 04 97 96 B8 F1 8E C6 57 E8 52 D7 D5 63 92 Radar_FR_TomTom.ov2
; Radar_PT_TomTom
E8 1A 0D 64 F1 51 E0 09 6A 95 98 64 C4 49 4B E8 Radar_PT_TomTom.ov2
; Safety_Cam_PL_TomTom
74 50 AA F5 2A 08 E7 FF 3B BF 09 0D 23 C0 34 3F Safety_Cam_PL_TomTom.ov2
; Safety_Cam_UK_TomTom
93 67 0F 86 A8 B2 0E 69 14 52 A4 13 FE 61 6F 71 Safety_Cam_UK_TomTom.ov2
; Safety_Cam_UK_Premium
E4 FE 0E 56 C9 74 91 BA EB DA 42 C4 B2 C7 D8 01 Safety_Cam_UK_Premium.ov2
; Safety_Cam_AU_TomTom
F0 4D 3D 25 F8 A5 EE 78 8D 96 B2 B0 A5 1D E7 59 Safety_Cam_AU_TomTom.ov2
; Safety_Camera_Australia
9A 6A 56 4C 63 03 28 B8 98 27 E4 47 55 33 8C 22 Safety_Camera_Australia.ov2
; Safety_Cam_100_Australia
EF 89 AE C3 E5 4B 16 3C 52 B3 0E E3 D9 3F 22 84 Safety_Cam_100_Australia.ov2
; Safety_Cam_60_Australia
A7 E4 A8 39 6A F4 9E FC 2C 16 9D 0A 72 0B 69 B9 Safety_Cam_60_Australia.ov2
; Safety_Cam_70_Australia
3C 71 24 7B F1 5E C3 CD C0 70 A3 E1 BB 2A 3F 5E Safety_Cam_70_Australia.ov2
; Safety_Cam_80_Australia
62 2C 85 4F E1 5F CF 63 F0 69 1B AF B2 6A D5 49 Safety_Cam_80_Australia.ov2
; Safety_Cam_90_Australia
D2 43 3E CD FD 4F 13 57 C5 5F FF B3 49 EC 75 85 Safety_Cam_90_Australia.ov2
; Safety_Cam_Other_Australia
0C DB 0E 4B 4B 11 AD 8D D0 9E 73 C8 42 A0 F1 57 Safety_Cam_Other_Australia.ov2
; Safety_Cam_ZA_TomTom
F1 F2 06 E3 FB 83 D8 02 42 07 3F 7D DD B2 95 4A Safety_Cam_ZA_TomTom.ov2

; FuelStationsEU
54 42 0A 55 B4 EF 68 1D 35 A1 C5 85 50 95 06 44 FuelStationsEU.ov2

; data80_Baz
B9 C9 18 32 D3 72 DB E3 51 25 1E 0D 00 F3 77 1F data80.chk
; data82_Cevoli
09 AF 00 1C 26 BF F6 8A 19 44 8F 9C BC 99 0F 74 data82.chk
; data92_Della Noce
F2 A3 74 4E 97 E7 A0 21 86 67 FF D1 88 DF 83 1B data92.chk
; data93_Giacobazzi
82 E3 DC 3B C9 12 D0 49 A1 2F 2D E1 90 E5 7B E4 data93.chk
; data94_Marzocca
26 EA AA 60 2B 4B 4C 63 42 63 A5 46 D7 6B DB 0C data94.chk
; data95_Migone
E4 7E CA A1 59 39 27 3C 7E 78 30 AC 8D F8 88 71 data95.chk
; data101_Pali & Dispari
A5 7F 57 92 AE 9C A8 C3 78 D8 ED E8 A2 DB 2F 06 data101.chk
; data102_Fontana
1E 58 64 5B F2 8C 12 C9 D3 B2 5C A0 FE 0E 08 6F data102.chk
; data107_El director de cine
38 FD E7 2F 9F 22 6E D8 A6 DD 01 83 6C 0B 0B 78 data107.chk


Sorry its so long but like you ive not been able to upload even the smallest files as yet.
Also if its your maps or navcore not making sense of the camera files. Try the nav, and maps that id recently used on a Go300 they were..
naveco8204 and United_Kingdom_and_Republic_of_Ireland_815_2003

Hope this helps mate.

[tendriver]

Hi tendriver

Thanks again! Actually, the version I had downloaded DID have a seperate CSPEECH folder(not sure why). In it were two CSPEECH.DAT files - cspeech_GBR.dat and cspeech_IRL.dat. The same two filenames existed in the map directory too but were of zero byte file size. Once I copied the valid ones across(from CSPEECH to map directory), everything worked perfectly! I am really doing this for my dad ...so my dad says thanks to you as well :D. Now I just need to download the Central and Western Europe ones you posted. It's taking forever since I don't have premium account. Hope I get them before the links go bad!

That is good news. We both learned something. Good luck with the W&CE download. Those links have been up for a good while and shouldn't good bad.

[Eramaavaris]

UPDATE!!!

I saw this on another forum. I hope it helps ya.

Quote:
Originally Posted by XXXXXX
Hi,

My GO 510 has currently nc 8.051, new bluetooth remote control is perfectly working.
Some programs which need Touchscreen don't work, eg IRQ.
But they do work when using bluetooth remote control.

Does someone, using nc 8.204, has tested such same thing ?
I plan to upgrade my GO510 with nc 8.204, maps 815, and should like to have my bluetooth remote fully working.



REPLY.....
With navcore 8.204 : bluetooth remote works

Thanks for this tendriver! This was a very good news :). I assume this dude has same rc that you linked for me before, or is it so? It seems this new rc is required if you have go910 with nc 8.xxx and if it works with go510, it should work with go910.

[gadgetathome]

please post the speed camera#s you have installed and we can test them ;)


I can confirm that that the Safety camera work I test them on my GO510 before posting them.

As I have subscribed to the service.

All you need to do as stated on previous post

1. Copy the 'Safety Camera' files to the insert_meta_from_Map_here folder
2. Run the RunMeforDCT
3. Select the navcore version you are running
4. Select 'Run Keygen for insert_meta_from_Map_here
5. Enter device ID
6. Copy all files in the insert_meta_from_Map_here to the map folder

And your done!

Tested on numerous Tomtom's

Hope this Helps :)

[Okypok]

Guys,
Have one little isue
I use UK map, western Europe map and CEE map. All in different folders.
To get from one country to another i need to switch maps, so planing from UK to France not possible i have to go to the uk border first and then change map.
Is it possible to create a TXT file so i caN PLAN MY JORNEY THRU ALL THE COUNTRYS.
tHANKS!

[SIRHOWIE]

:rolleyes::rolleyes::rolleyes::rolleyes::rolleyes: :mad::mad::mad::mad::mad:
or read the manual Merry Christmas

[Okypok]

:rolleyes::rolleyes::rolleyes::rolleyes::rolleyes: :mad::mad::mad::mad::mad:
or read the manual Merry Christmas

Thanks,
But if i need to go to Ukraine then what?

I have no manual, caN ANYONE HELP PLEASE!

[rahulk99k]

thanks dear for sharing.......

[tendriver]

Online Shops for you Low price! high-quality!! good prestige!!!

Hello! welcome to our website; www *****-trader com

we can supply low price with high quality products.You can view our website for the details.
Thanks for your reading , pls email us if u have any questions about business .

We hope that will make a long&great business with you in future.
Your satisfactions,Our pursuit!
Please Email me to get discount!!






come on!!Online shop for top quality and lower price for you!
Hello! welcome to our website; www s hoes-trader com
our company professional wholesale name brands clothes, *****, handbags, ect, and every month we all can offer you the newest styles and hot sell items.
We offer have the best services, high quality, fast delivery and reasonable price
My company aim:
1).Quality is the power that our enterprise survive for ever;
2)pace is the magic weapon that we win.
3)Payment method : western union/money gram.
4)Min order :6 mixed piceces order
5)Packing: All the products are packed with original Bags and tags also retro cards/ code numder
6)Shipment: fast and safe delivery. Goods will be received in about 5-7 days.
7)Feature:the best quality, competitive price and the best service
welcome to order now!!
website: www s hoes-trader com


With all due respect, I believe you are on the WRONG FORUM.

[tendriver]

Thanks for this tendriver! This was a very good news :). I assume this dude has same rc that you linked for me before, or is it so? It seems this new rc is required if you have go910 with nc 8.xxx and if it works with go510, it should work with go910.

Yes, same RC, a Tomtom Bluetooth unit. I have since seen several more post confirming that this unit works with NC8.xx and many different devices.

[msubedar]

Hi there, I have just updated my TT 520 from NC V8.320 to V8.204 & I have got UK & IRE Map V815.2003, My previous NC (V8.320) was working fine with pretty much no problems. I was having the same problem when installing V8.204 as some other members where as I wasn't getting the Mic icon so i could not use Voice Commands but with thanks to Rytuneff & Tendriver I have got that sorted, I am just playing about with my tomtom and have found that My MP3 Player doesn't work, i have got some songs on the Internal in the mp3 folder but when i choose to play through internal or even through the FM Transmitter i get no sound, i can also tell that there is something wrong as when you select a song, the actual mp3 player does not come up. Any advice on this??? Thanks, Mo.

[tendriver]

Hi there, I have just updated my TT 520 from NC V8.320 to V8.204 & I have got UK & IRE Map V815.2003, My previous NC (V8.320) was working fine with pretty much no problems. I was having the same problem when installing V8.204 as some other members where as I wasn't getting the Mic icon so i could not use Voice Commands but with thanks to Rytuneff & Tendriver I have got that sorted, I am just playing about with my tomtom and have found that My MP3 Player doesn't work, i have got some songs on the Internal in the mp3 folder but when i choose to play through internal or even through the FM Transmitter i get no sound, i can also tell that there is something wrong as when you select a song, the actual mp3 player does not come up. Any advice on this??? Thanks, Mo.

On page 6 of Change Preferences, tap Music preferences, tap Show music button in Driving View. Then in Driving/Map View, when you tap the musical note, it should take you to TomTom Jukebox, which gives you six options. Tap Song to see if your music is there. Or go to page 2 of the Main Menu, Music & Media, TomTom Jukebox, Song and see if your music shows up. I know your volume is on and turned up.

[msubedar]

The song list appears but it does not seem to play anything when you tap on a song, neither does it take you to the player mode where you can change track etc.

[tendriver]

The song list appears but it does not seem to play anything when you tap on a song, neither does it take you to the player mode where you can change track etc.

When I play a song in my 720, there is NO player mode to change tracks, either with a single or an album. Connect your 520 to your puter. Open the 520 in windows explorer. Open the 520 mp3 folder and click on a song. If the song plays in windows media player, then we can rule out that it is a bad song file.

[msubedar]

Oh, one other thing that i can think of is that from the link you gave me for the patched NC 8.204 files, the only file I used was the "ttsystem" file. I didn't copy over the "Outsourced.bin" or the "Switchfiles" or this other file which was called "mctx.dat". Do you think this has anything to do with the MP3 Player not working???

[msubedar]

When I play a song in my 720, there is NO player mode to change tracks, either with a single or an album. Connect your 520 to your puter. Open the 520 in windows explorer. Open the 520 mp3 folder and click on a song. If the song plays in windows media player, then we can rule out that it is a bad song file.

Nope, there is nothing wrong with the songs, Just opened all the songs from the mp3 folder and they all work fine.

[tendriver]

Nope, there is nothing wrong with the songs, Just opened all the songs from the mp3 folder and they all work fine.

Bummer!!! Wonder if something was missing from the 8.204 that you down loaded. Not counting the map folder, I have 31 folders & 37 files in my root directory.

[msubedar]

Bummer!!! Wonder if something was missing from the 8.204 that you down loaded. Not counting the map folder, I have 31 folders & 37 files in my root directory.

I'll try the 940 Version.

[tobeychris]

Makes you wonder why you can't say ***** (s.hoes), but you can say hoes.

[tendriver]

i'll try the 940 version.

try it with the same ttsystem file.

[msubedar]

Just tried the 940 Version and MP3 Jukebox is now working.

[tendriver]

Just tried the 940 Version and MP3 Jukebox is now working.

Voila!!!! Outstanding!!! Bloody good!!!

[msubedar]

Voila!!!! Outstanding!!! Bloody good!!!

Thanks for all your help, greatly appreciated, Mo.

Also I went to update the new NC to see if i get QuickGPS updates which i did so that is great as the same with MapShare updates but also for the frist time ever, TT HOME also installed Safety Camera's which was strange, all good hey!!!

[tendriver]

Thanks for all your help, greatly appreciated, Mo.

Also I went to update the new NC to see if i get QuickGPS updates which i did so that is great as the same with MapShare updates but also for the frist time ever, TT HOME also installed Safety Camera's which was strange, all good hey!!!

Safety Alerts is a standard part of the 940 in the UK & Europe. Just for jollies, go here to see what is included and see if you are getting all of it.

http://www.tomtom.com/products/product.php?ID=763&Category=0&Lid=1 (http://www.tomtom.com/products/product.php?ID=763&Category=0&Lid=1)

[phozy888]

just installed western europe 1gb-815.2024 on to my tomtome one (30 series). i now have message " you cannot use this map on this device " .. whats my next step.
i have got my code genrated from that KG_NEW.exe *.midi thing... im not sure what to do next.

am i nearly there yet ?

[gadgetathome]

Hi All,

Just a quick post to say Happy Christmas & Happy New Year.

Here is a little stocking filler for you all the latest Safety Camera as of 24/12/08.

Keep up the good work. :)

[elimelim]

hi i have an old tomtom 500 and im looking for the uk and ireland maps v8.15

i havent got a clue where to start,

if anyone could post a detailed tutorial or something

[tendriver]

hi i have an old tomtom 500 and im looking for the uk and ireland maps v8.15

i havent got a clue where to start,

if anyone could post a detailed tutorial or something

Everything you need to know is already on this thread. You just have to look. To make it easier, here is a link to the archives for this thread. It is 5 pages instead of 80.

http://forum.gsmhosting.com/vbb/archive/index.php/t-586405-p-1.html (http://forum.gsmhosting.com/vbb/archive/index.php/t-586405-p-1.html)

[tendriver]

just installed western europe 1gb-815.2024 on to my tomtome one (30 series). i now have message " you cannot use this map on this device " .. whats my next step.
i have got my code genrated from that KG_NEW.exe *.midi thing... im not sure what to do next.

am i nearly there yet ?

Yep, you are almost there. Everything you need to know is already on this thread. You just have to look. To make it easier, here is a link to the archives for this thread. It is 5 pages instead of 80.

http://forum.gsmhosting.com/vbb/archive/index.php/t-586405-p-1.html (http://forum.gsmhosting.com/vbb/archive/index.php/t-586405-p-1.html)

[joseph64]

Hopefully the use of the Outsourced folder May be better understood with this text adapted from the original to English syntax. The essential meaning remains unchanged.
.................................................. .................................................. ....................................

© TTUser 2008

With Outsourced. xxxx you can save RAM. Drop the complete Folder in root.

With a File ttgo.bak, with the latest OFFICIAL Navcore-Numbers for your Device in root Home will think you have the correct version installed, not the Version that is actually installed. You only need this if your Device has the Official Version NOT this Version here.

You can create a ttgo.bak yourself with correct Numbers or use the inbuild auto Creation.
Use version.txt in root or /Config with your required Official Numbers.

Currently 22Dec '08 these are for:

TomTom GO, GO x00, GO x10, ONE 1st Edition, ONE 2nd Edition
A:7903
B:9183

Rider
A:7901
B:9181

ONE 30-Series, XL 30-Series, ONE XL, ONE 3rd Edition
A:8010
B:9369

x20,x30,630
A:8300
B:9732

With the Switchfiles in Root or in Folder Config you can configure yourself your Device.
Copy the Files from switchfiles.zip to root or /Config. Only root or Folder Config, NOT both!

TTSoff = switch TTS off
FMon = FMTransmitter on (for x10)
btoff = disable BT, if you do not need it , you may then save a little more RAM
bton = if you not have BT, enabling this will show Button for Speedcams in Menu
noqfixdel = disable Quickfix erase after you have pressed reset, if you wonder where Qfixfiles have gone.
delgns = remove (Start,supend) old TMC-Data (gns/gnsdata)
cleanflash= delete all from Flash that is possible (*.mac etc.), Settings will be lost
viewmsg = enable BootHelpMessages
noclean = disable the "remove all unneeded Files" to save RAM
rm = remove a few additional Files (these may be needed for BT) to save RAM (experimental)
runcheck = check a few "important" Files, view config.txt for Result
changedtext.txt = you can change the Text on Status/Info Screen, write your own Text in the File e.g. "Jim's TomTom"
poweroff = Device switch really completely off, not only sleeping.
SDid = write for each SD/Memory another Number inside and you can for each use your own different Mainsetting. Handy if you use more than one SD card.
usesetting= use always Settings from SD, not the in Device saved Settings

The Following
Does not apply to ALL Navs (this was adapted from 8.070)

model.txt = write one from following inside

ori = switch to your real Device
xls = switch to ONE XLS Emulation (for ones)
onettssdk = switch to ONE + TTS + SDK
onettssdk2= switch to ONE + TTS + SDK
x20 = switch to x20 Emulation
Standard is x30

cycle.txt = switch each reset between Setting from cycle.txt <> model.txt
It BacksUp also the Mainsettings between both Emus.( Emulations)

© TTUser 2008

Hi Rytenuff,
I have upgraded my GO910 to Navcore 8.300.9732 and installed some 815.2003 maps and sofar all fine. I was quite a shock when starting up the 910 and it started to talk to me about no routes planned, but it was nice to realize that his function worked right away, though I din't expect it.
I also have 'patched' my HOME on the computer, but still when connecting to home it moans about errors found like :"
"ERROR: HomeBase/Unknown: Se ha producido una excepción desconocida.
@ .\framework\DeviceItemScannerThread.cpp(75)
bad allocation
in .\framework\DeviceItemScannerThread.cpp:75
Stack:
0. function errorAbortTask chrome://tthome/content/logic/ttTask.js:445
error(e);
1. function error chrome://tthome/content/ui/bindings/ttwizard.xml:1109
else if (errorNonFatal)
2. chrome://tthome/content/ui/bindings/ttwizard.xml:520
},

Time: Mon, 28 Dec 2008 16:24:33 GMT"

Would it help to make a "ttgo.bak" file and copy/paste the first bit of the "ttgo.bif" file and than changing the 'DeviceName' to 930, 'DeviceVersionHW' to 930 put in a 'fake' DeviceSerialNumber and blank the 'DeviceUniqueID' and than in the ApplicationsVersion your A:7903 and B:9183?
In the root I do have a "text" folder with a "config.txt" saying :"Current Emulation:X30 :1 Run in Save RAM Mode, Cleaning disabled."
Should this not take care of making the guy's at TT think that my 910 is another device?
Now that I'm asking I also see another weird thing in my root.
In the ttgo.bif file and in the device, I can see that my 910 is using bootloader 4.8600, but in the root I see two "system" files, one is system5.5022 and the other one is system5.5106.
Are these not bootloaders?
What are these 2 files doing there?
Can I just remove them?
Thank you for all your time and effort spend on this forum to help us out.
Cheers, joseph64

[joseph64]

See rytenuff's post 1116 just above!!

Hi Tendriver,
I assure you that I did.
I've tried all sorts of dll patches, but it keeps moaning about errors found.
"ERROR: HomeBase/Unknown: Se ha producido una excepción desconocida.(an unknown exeption error ocured)
@ .\framework\DeviceItemScannerThread.cpp(75)
bad allocation
in .\framework\DeviceItemScannerThread.cpp:75
Stack:
0. function errorAbortTask chrome://tthome/content/logic/ttTask.js:445
error(e);
1. function error chrome://tthome/content/ui/bindings/ttwizard.xml:1109
else if (errorNonFatal)
2. chrome://tthome/content/ui/bindings/ttwizard.xml:520
},

Time: Mon, 28 Dec 2008 16:24:33 GMT"
I have tried the lot, but still no joy.
I have also posted the previous post about this HOME prob. and hope that between all of you "Guru's" someone can come up with a solution I have not tried yet.
Thanks for all your time and help.
Cheers, joseph64.

[homeoffice2005]

Thanks to everyone for their help........cheers wannscan:)

[joseph64]

Just tried the 940 Version and MP3 Jukebox is now working.
Hi msubedar,
What Navcore is that and... will it work on a GO910.
Since I have upgraded to Nav 32** I can't get HOME to work.
Perhaps this could be the solution.
Cheers, joseph64.:D

[msubedar]

Hi msubedar,
What Navcore is that and... will it work on a GO910.
Since I have upgraded to Nav 32** I can't get HOME to work.
Perhaps this could be the solution.
Cheers, joseph64.:D

Hi there, I installed Navcore V8.204 but you get two versions, one for the 540-740 and one for the 940, I first installed the 540-740 and i wasn't having any luck with the TomTom Jukebox so i installed the 940 Version of 8.204 and now everything works fine. I would recommend installing the 940 version on your 910 with a patched ttsystem file available from the patched NC 8.204 files that you can find on earlier threads, i got mine from tendrivers post, and then don't forget to patch your map to the new Navcore. Connect after all this is done, connect it to your computer and see what Home says, What i did when i installed the new NC was that I completely un-installed TT HOME, but beware as uninstalling it does not remove all HOME files so if you are running vista then in the search bar, type in "appdata" and go into "roaming" an inside there you may still find a TomTom folder, delete that folder, then type in "HOME" in the search bar on Vista and you will find a folder called "HOME" which will be in your Documents folder, Delete also that HOME folder, after you uninstall HOME and delete these two folders then you can re-install a fresh version of HOME from the tomtom website. After you install HOME connect your 910 with the new Navcore and Your Map and you should get updates like also Safety Camera's, QuickGPS updates, and if you want Map Share Corrections then you have to press the "Get Map Share Updates" button on HOME and those will also then be available. Home may try to give you a new Application which on mine it says NC Version 8.300, be sure not to tick that. It may seem like a lot to do but it actually very simple. First Try connecting you 910 with the new navcore and if Home is being strange then do what i said and all should work fine. If you get stuck just let me know.

Mo.

[gadgetathome]

Hi All,

Just a quick post to say Happy Christmas & Happy New Year.

Here is a little stocking filler for you all the latest Safety Camera as of 24/12/08.

Keep up the good work. :)


Hi All,
It looks like not many people are intrested in the 'Saftey Camera' update as only about 4 members have thanked me & 15 have not!

As stated by another user. Do you see the button at the bottom right marked, "Thanks"? Click on it occasionally wherever you get the stuff or help you need.


Cheers

[tendriver]

Hi there, I installed Navcore V8.204 but you get two versions, one for the 540-740 and one for the 940, I first installed the 540-740 and i wasn't having any luck with the TomTom Jukebox so i installed the 940 Version of 8.204 and now everything works fine. I would recommend installing the 940 version on your 910 with a patched ttsystem file available from the patched NC 8.204 files that you can find on earlier threads, i got mine from tendrivers post, and then don't forget to patch your map to the new Navcore. Connect after all this is done, connect it to your computer and see what Home says, What i did when i installed the new NC was that I completely un-installed TT HOME, but beware as uninstalling it does not remove all HOME files so if you are running vista then in the search bar, type in "appdata" and go into "roaming" an inside there you may still find a TomTom folder, delete that folder, then type in "HOME" in the search bar on Vista and you will find a folder called "HOME" which will be in your Documents folder, Delete also that HOME folder, after you uninstall HOME and delete these two folders then you can re-install a fresh version of HOME from the tomtom website. After you install HOME connect your 910 with the new Navcore and Your Map and you should get updates like also Safety Camera's, QuickGPS updates, and if you want Map Share Corrections then you have to press the "Get Map Share Updates" button on HOME and those will also then be available. Home may try to give you a new Application which on mine it says NC Version 8.300, be sure not to tick that. It may seem like a lot to do but it actually very simple. First Try connecting you 910 with the new navcore and if Home is being strange then do what i said and all should work fine. If you get stuck just let me know.

Mo.

You created an awful lot of unnecessary work for yourself when you uninstalled TT HOME. All you had to do was add the correct folder in the correct location. In your case it was the "Navcore.8.204.9718_tomtom.com" folder. It takes about 15 seconds from start to finish. Also you don't have to repatch your map because you change navcores. You patch a map for a device, not for a navcore.

[tendriver]

Hi msubedar,
What Navcore is that and... will it work on a GO910.
Since I have upgraded to Nav 32** I can't get HOME to work.
Perhaps this could be the solution.
Cheers, joseph64.:D

In one post you say you have nav 8.300, then in another you say Nav 32**. What Navcore do you actually have??? What operating system is on your puter??

[rytenuff]

Hi All,
It looks like not many people are intrested in the 'Saftey Camera' update as only about 4 members have thanked me & 15 have not!

As stated by another user. Do you see the button at the bottom right marked, "Thanks"? Click on it occasionally wherever you get the stuff or help you need.


Cheers

15/4 That's not even par for the course!

This is only four of the posts I have made:
http://forum.gsmhosting.com/vbb/showpost.php?p=3979743&postcount=995 Downloaded 23 times/ thanked 2
http://forum.gsmhosting.com/vbb/showpost.php?p=3976825&postcount=964 Downloaded 142 times/ thanked 2
http://forum.gsmhosting.com/vbb/showpost.php?p=3957091&postcount=820 Downloaded 92 times/ thanked 9
http://forum.gsmhosting.com/vbb/showpost.php?p=3951578&postcount=768 Downloaded 51 times/ thanked4


That's a total of 308 downloads and 17 Thanks.
That's why I can't be bothered to post anymore. Too many Gimmies.

[Cozz]

I finally got it to work!!!

Thank you everyone here. I have finally got my TT One XL to work right.

What I did for my TT One XL with Navcore 8.010.9369 and bootup 5.5
The One XL doesn't see maps by themselves on the SD card. It only boots from it when the card is there. It can only go internal or external in the beginning of the boot up. With the SD card in place, it automatically chooses the SD as boot up. I could not figure any other way other to do it.

I added all the files found in TTUSers "navcore_SE_8.010.9369" folder (These files will make the card able to boot)
Then added the "ttsystem" file found inside the "SE_ttsystem.8.011.9373.go510-710-910" folder. (the one only that worked till this day for the my One XL)
Then added "Western_Europe_1GB_815_2024" folder.
Then ran "RunMeforDCT" in the "Easyusetools" folder (after adding PNA and mata files in "insert_meta_from_Map_here" and making sure the meta txt files in "Progs" is updated)
Copied the new DCT file to the Map folder.
Took out the SD card from the PC then put it in the One XL.

It boots from the SD card like a factory system and I retain the TT One XL in factory spec. Take out the card, it reboots, now I have the US and Guam maps and factory system again.

Just like I wanted!!!!!!!!:D:D:D:D:D

Thanks to everyone here!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[rytenuff]

See this kind of post riles me. You made your post DIRECTLY UNDER a post that comments on people's inability to click on a "Thanks" button. Do you see the irony? I read your posts and see that you have been given links which you say you have used. You say thanks to everybody, but "everybody" didn't bother to type out help for you. Just some which you should have singled out for thanks.

Yet,
Posts:6
Thanks: 0

[Cozz]

See this kind of post riles me. You made your post DIRECTLY UNDER a post that comments on people's inability to click on a "Thanks" button. Do you see the irony? I read your posts and see that you have been given links which you say you have used. You say thanks to everybody, but "everybody" didn't bother to type out help for you. Just some which you should have singled out for thanks.

Yet,
Posts:6
Thanks: 0

???????????????????????????? What are you talking about. I looked back at other pages and noticed that you mentioned it before but all I get on the lower right is a quote button.

[msubedar]

???????????????????????????? What are you talking about. I looked back at other pages and noticed that you mentioned it before but all I get on the lower right is a quote button.

You have to be signed in to be able to give a thanks, then the Thanks button will appear!

[homeoffice2005]

Hi Guys me again,

Just an update......Managed to get the DCT file for the safety cams and transferred acrossed, but still not showing up in the tomtom 500.

As wannscan mentioned, could be the v8.10 firmeware on the tomtom?

Thanks again guys

[ADB100]

Hi Guys me again,

Just an update......Managed to get the DCT file for the safety cams and transferred acrossed, but still not showing up in the tomtom 500.

As wannscan mentioned, could be the v8.10 firmeware on the tomtom?

Thanks again guys

They don't 'show up' as such. On your TomTom go to services and select 'TomTom Safety Cameras'. If you haven't generated the correct .dct files or they are not there then you get a message about subscribing, if they are there but this is the first time you have selected them you get an agreement page that you must agree to. After that you get a page with 6 (I think) options - Report, Update, Change warnings, Disable/Enable, Enable auto updates and Enable report button. Depending on your Navcore version you might be able to 'see' the camera positions if you select 'Report' and then browse the map. I think with Navcores earlier than 8.204 you can see them but with 8.204 and later they don't appear here (they appear on my PDA running 7.910(9185), but didn't on a One I upgraded last week to 8.204(9718)).
However with all versions they appear on your route (if they are enabled) as well as demo routes.

Andy

[homeoffice2005]

Thanks Andy......They seem to be working, the actually logos for the cams are different to the ones im use too, but everythings showing up....also did what u mentioned in ur post but the cams were already on the screen....

Thanks again everyone.......and I have tried to thank everyone individually by pressing the thanks button, so if ive missed anyone let me know.

[joseph64]

In one post you say you have nav 8.300, then in another you say Nav 32**. What Navcore do you actually have??? What operating system is on your puter??
Hi Tendriver,
Sorry for the confusion, but I do have Nav.8300.9723 on the GO 910 with Maps Ver. 815.2003.
The 910 works A-OK so no problem there.
The problem is the HOME on my Win XP-Pro SP3.
Obviously I have in "C:\Documents and Settings\Jos\Datos de programa\TomTom\HOME\Profiles\q9ktmbkq.default" the patched "Navcore.8300.9732tomtom.con" folder with the dll and another 10 files in it like "chrome manifest" 8x" *.data" and "install.rdf".
nevertheless, HOME keeps complaining about the above mentioned error.
I have also tried with only replacing- overwriting the dll before, but the result was the same.
I hope that where you mention 15 seconds to have HOME working, you don't mean to just copy the patched dll to the profiles\Navcore folder as I have tried that before.
It still would be nice to get the GPS Fix and Mapshare data.
I would appreciate some suggestions from the Guru's.
Cheers, Joseph.

[joseph64]

Hi Tendriver,
Sorry for the confusion, but I do have Nav.8300.9723 on the GO 910 with Maps Ver. 815.2003.
Don't understand why the "32**", must be getting old (65 last week!),
Just a wee update.
Cheers, Joseph64 (from when I was still 64!).

[rytenuff]

Make a copy of your BIF file. Paste it to your desktop. Open it with notepad.
Change: ApplicationVersionVersionNumber= ( the official latest nav for your 910) 7900 I think?
ApplicationVersion= (as above) 9180 I think?
Select: save as
Change name to: ttgo.bak
Place file in root of your device along side ttgo.bif.
On reboot your device will create a ttgo.ori file as well.
Home should see the bak file and work.

[rytenuff]

Sorry should be,
ApplicationVersionVersionNumber= 7903
ApplicationVersion= 9183
I believe.

[tendriver]

Hi Tendriver,
Sorry for the confusion, but I do have Nav.8300.9723 on the GO 910 with Maps Ver. 815.2003.
The 910 works A-OK so no problem there.
The problem is the HOME on my Win XP-Pro SP3.
Obviously I have in "C:\Documents and Settings\Jos\Datos de programa\TomTom\HOME\Profiles\q9ktmbkq.default" the patched "Navcore.8300.9732tomtom.con" folder with the dll and another 10 files in it like "chrome manifest" 8x" *.data" and "install.rdf".
nevertheless, HOME keeps complaining about the above mentioned error.
I have also tried with only replacing- overwriting the dll before, but the result was the same.
I hope that where you mention 15 seconds to have HOME working, you don't mean to just copy the patched dll to the profiles\Navcore folder as I have tried that before.
It still would be nice to get the GPS Fix and Mapshare data.
I would appreciate some suggestions from the Guru's.
Cheers, Joseph.

I believe I see your problem. According to the file path you gave above, you have the folder in the wrong location. It should be here:


C:\Documents and Settings\Jos\Datos de programa\TomTom\HOME\Profiles\q9ktmbkq.default\ext ensions\Navcore.8300.9732tomtom.con

[rytenuff]

You have to be signed in to be able to give a thanks, then the Thanks button will appear!

Except you can't post unless you are logged in. So he could see the thanks button perfectly well.

[rytenuff]

I believe I see your problem. According to the file path you gave above, you have the folder in the wrong location. It should be here:


C:\Documents and Settings\Jos\Datos de programa\TomTom\HOME\Profiles\q9ktmbkq.default\ext ensions\Navcore.8300.9732tomtom.con


Well spotted ! Hope that's the problem, although the correct path is in the link to the already patched folder I posted here:
http://forum.gsmhosting.com/vbb/showpost.php?p=4000884&postcount=1116

XP Users:

Home v2.2 - x.x :-
C:\Documents and Settings\????\ApplicationData\TomTom\HOME\Profiles \????.default\extensions\Navcore.?.?????@tomtom.co m

[tendriver]

Well spotted ! Hope that's the problem, although the correct path is in the link to the already patched folder I posted here:
http://forum.gsmhosting.com/vbb/showpost.php?p=4000884&postcount=1116 (http://forum.gsmhosting.com/vbb/showpost.php?p=4000884&postcount=1116)

XP Users:

Home v2.2 - x.x :-
C:\Documents and Settings\????\ApplicationData\TomTom\HOME\Profiles \????.default\extensions\Navcore.?.?????@tomtom.co m

You are absolutely correct. I checked my posts, that also have the file paths for both XP and Vista, to make sure they are correct. They are!!

[pictopicto]

15/4 That's not even par for the course!

This is only four of the posts I have made:
http://forum.gsmhosting.com/vbb/showpost.php?p=3979743&postcount=995 Downloaded 23 times/ thanked 2
http://forum.gsmhosting.com/vbb/showpost.php?p=3976825&postcount=964 Downloaded 142 times/ thanked 2
http://forum.gsmhosting.com/vbb/showpost.php?p=3957091&postcount=820 Downloaded 92 times/ thanked 9
http://forum.gsmhosting.com/vbb/showpost.php?p=3951578&postcount=768 Downloaded 51 times/ thanked4


That's a total of 308 downloads and 17 Thanks.
That's why I can't be bothered to post anymore. Too many Gimmies.

Can i join in???????

Posted tomtom 7 link for pocket pc here (ttp://forum.gsmhosting.com/vbb/showpost.php?p=3712532&postcount=2529)

and have very nicely received 4 yes i repeat 4 thanks for it.......
So well done (avro_arrow, mentholflash, tazted2001, TR7 Nutter)

so how many times would you guess its been downloaded from that single posting of mine???????????


Anyone??

No....ok the number is.......................473. (last download 30/12/08).

but at least it keeps earning me points to help extend my membership..:)

[BuMobiles]

We see this all the time.....!

People wanting software, links, advice but can't press 'Thanks' or even state 'Thank You' on a reply :rolleyes:

If you want members to respect you then press the thanks button you'll see a change of heart in the members (like they might start posting new links) ;)

[omega tdi]

:rolleyes: hi my :rolleyes:((tomtom is dead )) :rolleyes:, to all member for (( gsm-forums)) ,happy new year to all ,I need some help with my tomtom go 910 , when I turned on not showing any thing ,onlly showing the red cross flashing ,I don't know what is hapend to it sound liek I lost evry thing the map and all been formmated becouse when i go to tomtom home my memore is empty or not have any program on it not map nothing on it ? so please can some one help me to fix it thank's in addvance for any help , :rolleyes::rolleyes:

[tendriver]

Let's see here.....

pictopicto - Member since Oct 07 Thanks Given 59

Gadgetathome - Member since Dec 07 Thanks Given 63

BuMobiles - Member since May 07 Thanks Given 80

rytenuff - Member since May 06 Thanks Given 85

tendriver - Member since Jul 08 Thanks given 86

You lads are kinda lagging behind in hitting that ole THANKS button!!!!!!!

[tendriver]

:rolleyes: hi my :rolleyes:((tomtom is dead )) :rolleyes:, to all member for (( gsm-forums)) ,happy new year to all ,I need some help with my tomtom go 910 , when I turned on not showing any thing ,onlly showing the red cross flashing ,I don't know what is hapend to it sound liek I lost evry thing the map and all been formmated becouse when i go to tomtom home my memore is empty or not have any program on it not map nothing on it ? so please can some one help me to fix it thank's in addvance for any help , :rolleyes::rolleyes:

Are you using Windows XP or Vista on your computer?

[BuMobiles]

Let's see here.....

pictopicto - Member since Oct 07 Thanks Given 59

Gadgetathome - Member since Dec 07 Thanks Given 63

BuMobiles - Member since May 07 Thanks Given 80

rytenuff - Member since May 06 Thanks Given 85

tendriver - Member since Jul 08 Thanks given 86

You lads are kinda lagging behind in hitting that ole THANKS button!!!!!!!

thats now

BuMobiles - Member since May 07 Thanks Given 80 + 1 ;)

Haha, have a great New Year Guys

Thanks
B.u Mobiles

[tendriver]

thats now



Haha, have a great New Year Guys

Thanks
B.u Mobiles


Thanx for being good natured about my satirical humor!!!

[rytenuff]

Let's see here.....

pictopicto - Member since Oct 07 Thanks Given 59

Gadgetathome - Member since Dec 07 Thanks Given 63

BuMobiles - Member since May 07 Thanks Given 80

rytenuff - Member since May 06 Thanks Given 85

tendriver - Member since Jul 08 Thanks given 86

You lads are kinda lagging behind in hitting that ole THANKS button!!!!!!!

I click Thanks on "Useful posts" not just any old post to get my thanks quota up! ;)


BTW The THANKS button is a fairly new feature. I know for a fact that I was the first to click THANKS on a BU post on 23rd May 2008. I am sure BU will verify that.

[Cozz]

Except you can't post unless you are logged in. So he could see the thanks button perfectly well.

Don't call me a liar. I read most off all pages here and never ever seen a thank you button....ever. I click on quote then a log in. Then I'm out and reading other forums. Honest to *** I haven't seen it so don't say I did. If I did, I would have thanked those involved but I didn't so I thanked them in my posts.Wouldn't be easy to just click thanks instead? To me it makes no difference how I thank people as long as I do it but you have a different opinion. As if you want to count thanks as brownie points or something to make you feel better or bigger. It's your logic that I rather not know.

I cannot find any other place on earth that people bitch at how they would like to be thanked. Do you want it on a silver platter to? Have a nice day.

And to all those that helped... thank you even if it's not the way you want to be thanked.

[rytenuff]

If that is true, then I apologise to you. Perhaps it is the way you log in. i.e. clicking on quote, then logging on. Curious way to do it but there you are. I will try that myself after I post to see if the THanks buttons are missing from all posts.

Have a bash at finding links, uploading stuff for hours, answering the same question many many times. Making sure you have the correct information, double checking that information to the best of your ability(usually, sometimes you get lazy) typing it up and posting it.
Now, sit back and watch how the xxxx doesn't even bother to reply, and the many other xxxx's who just take what they want never to return and help others. Until they need more stuff.
If you never click the Thanks button you look like a gimme. Someone who only comes to the forum to feed themselves.

[rytenuff]

Don't call me a liar. I read most off all pages here and never ever seen a thank you button....ever. I click on quote then a log in. Then I'm out and reading other forums. Honest to *** I haven't seen it so don't say I did. If I did, I would have thanked those involved but I didn't so I thanked them in my posts.Wouldn't be easy to just click thanks instead? To me it makes no difference how I thank people as long as I do it but you have a different opinion. As if you want to count thanks as brownie points or something to make you feel better or bigger. It's your logic that I rather not know.

I cannot find any other place on earth that people bitch at how they would like to be thanked. Do you want it on a silver platter to? Have a nice day.

And to all those that helped... thank you even if it's not the way you want to be thanked.


Well I did it your way . Logged out/clicked on quote/ logged in again/Clicked Submit Reply.
I will see if I can read Thanks button against any posts ( except my own of course, you can't thank yourself !) Now!

[rytenuff]

Yep, they're there alright.

[Cozz]

If that is true, then I apologise to you. Perhaps it is the way you log in. i.e. clicking on quote, then logging on. Curious way to do it but there you are. I will try that myself after I post to see if the THanks buttons are missing from all posts.

Have a bash at finding links, uploading stuff for hours, answering the same question many many times. Making sure you have the correct information, double checking that information to the best of your ability(usually, sometimes you get lazy) typing it up and posting it.
Now, sit back and watch how the xxxx doesn't even bother to reply, and the many other xxxx's who just take what they want never to return and help others. Until they need more stuff.
If you never click the Thanks button you look like a gimme. Someone who only comes to the forum to feed themselves.

I agree about those who come here and feed off. I spent several days after the last question here to figure this issue out elsewhere on the net. Once I finally figured it out still came back and posted here on this thread just in case anyone else in the future has this same problem but I got flamed instead.

PS. This is my third time logging onto the forum in the last hour or so(in order to post). I'm sure admins can find out if it's true or not. I think i have my FF browser set not to save any info at all like cookies and stuff like that.

[Cozz]

Well I did it your way . Logged out/clicked on quote/ logged in again/Clicked Submit Reply.
I will see if I can read Thanks button against any posts ( except my own of course, you can't thank yourself !) Now!

Yup, I see the thanks button after I log and post but by then I already said thanks and already off to other forums. I have to log again when I come back.

My apologies.

[tendriver]

I click Thanks on "Useful posts" not just any old post to get my thanks quota up! ;)


BTW The THANKS button is a fairly new feature. I know for a fact that I was the first to click THANKS on a BU post on 23rd May 2008. I am sure BU will verify that.

I also only Thank posts that I appreciate. You know I don't care about a "thanks quota", either giving or receiving.

[rytenuff]

@Cozz

Have you never seen next to a post
The Following User Says
Thank You to BlahdeBlah
For This Useful Post: Joe Bloggs?
and wondered how do they do that? Or thought I would like to do that for "BlahBlah" too for helping me?
Here I'll do one for you to show you.

[pilotman]

I have a happy installation on my 910 of 8.204 with maps North America 815.2019 and US_Canada 815.2022 (NA has IQ routes and lane info, US-Canada does not). Voice recognition works fine.

When I connect to home and request mapshare corrections and gps updates, the files apparently load correctly. But when I disconnect, turn off, then turn on my 910, the "choose language" screen appears, as though it's a new device. I have to do a pin reset once or twice to bring back my normal screen. I put a patched dll file in the appropriate folder but haven't been able to operate my 910 with home. I have installed several patched navcore upgrades and added new maps without difficulty but I don't understand why I'm having so much trouble connecting to my computer. Any suggestions?

[rytenuff]

Strange one!
Try deleting the entire folder Navcore.8.204.9718@tomtom.com from Home Or putting it in another folder called Store or something so Home doesn't see it and replace it with this ready made patched one.

http://rapidshare.com/files/164940398/Navcore.8.204.9718_tomtom.com.rar

the path is :

XP Users:

Home v2.2 - x.x :-
C:\Documents and Settings\????\ApplicationData\TomTom\HOME\Profiles \????.default\extensions\Navcore.?.?????@tomtom.co m

Vista Users:-

C:\Users\???????\AppData\Roaming\TomTom\HOME\Profi les\?????????.default\extensions\Navcore.?.?????@t omtom.com

[msubedar]

Hey guys I don't think we should be having arguements, If we take something then we should also give in return whether it is just by saying or clicking thanks to the great guys on here who are just here to help us, they should also feel as if they are getting a reward in return so it doesn't take much to appreciate their kind work. And Plus Christmas has just passed by and we are very close to the new year so lets all be happy and cheer up.

HAPPY NEW YEAR TO ALL MEMBERS IN ADVANCE!!!

Thanks & Kind Regards,

Mo.

[rytenuff]

Here is the latest FIXED TomTom Radars and Meta 30th Dec '08 Last this year. Courtesy of THE MAVERICK

http://www.2shared.com/file/4551824/c47e95b1/TTfixedRadarsAnd_Meta30thDec08.html

[joseph64]

I believe I see your problem. According to the file path you gave above, you have the folder in the wrong location. It should be here:


C:\Documents and Settings\Jos\Datos de programa\TomTom\HOME\Profiles\q9ktmbkq.default\ext ensions\Navcore.8300.9732tomtom.con

Hi Tendriver,
Checked the line in C: and indeed, it has the "extensions" s you mention.
Still, it doesn't like my TT.
I'll try to make the ttgo.bak and see what happens.
Thanks a bunch for the help.
joseph64

[joseph64]

Hi tendriver,
Just edited and saved the ttgo.bak file with the 7903.9138 in the root, but after rebooting no ttgo.ori file to be seen.
connecting to HOME I still get:
ERROR: HomeBase/Unknown: Se ha producido una excepción desconocida.
@ .\framework\DeviceItemScannerThread.cpp(75)
bad allocation
in .\framework\DeviceItemScannerThread.cpp:75
Stack:
0. function errorAbortTask chrome://tthome/content/logic/ttTask.js:445
error(e);
1. function error chrome://tthome/content/ui/bindings/ttwizard.xml:1109
else if (errorNonFatal)
2. chrome://tthome/content/ui/bindings/ttwizard.xml:520
},

Time: Wed, 31 Dec 2008 12:06:01 GMT

The HOME version is the latest one -2.5.
As you will understand, for a non SW person this is a wee bit frustrating.:confused:
Please have another think about it.
HAPPY NEW YEAR to all.
Cheers, joseph :)

[omega tdi]

Are you using Windows XP or Vista on your computer?
hi ,thank you for your repplay ,I'm useing vista but ,I have other pc witch is xp so please could you help me to give life again to my go 910 , thank's again and happey new year to all gsm members

[tendriver]

Hi Tendriver,
Checked the line in C: and indeed, it has the "extensions" s you mention.
Still, it doesn't like my TT.
I'll try to make the ttgo.bak and see what happens.
Thanks a bunch for the help.
joseph64

Are you saying that your "Navcore.8300.9732tomtom.com" folder actually is in the "extensions" folder?

[tendriver]

hi ,thank you for your repplay ,I'm useing vista but ,I have other pc witch is xp so please could you help me to give life again to my go 910 , thank's again and happey new year to all gsm members

Connect your 910 to your computer, open windows explorer, open the drive for your 910 (mine happens to be on the k: drive) and you can see what is on the device. You may only need to delete and reload the Navcore.

[omega tdi]

connect your 910 to your computer, open windows explorer, open the drive for your 910 (mine happens to be on the k: Drive) and you can see what is on the device. You may only need to delete and reload the navcore.

hi tendriver

thank you for you repplay,i did what you advise me to do it but my tomtom disk is showing empty is say this folder is empty ???, i think the hard disk in in my go 910 has been formmated , any help and thank you very matuch again

[tendriver]

hi tendriver

thank you for you repplay,i did what you advise me to do it but my tomtom disk is showing empty is say this folder is empty ???, i think the hard disk in in my go 910 has been formmated , any help and thank you very matuch again

When you open your 910 drive on your computer, there are no files or folders on it at all?

[omega tdi]

When you open your 910 drive on your computer, there are no files or folders on it at all?

HI TENDRIVER

THANK YOU FOR YOUR REPPLAY YOU ARE STAR THANK'S FOR YOUR TIME , YES THERE IS NO FILES AT ALL IS EMPTY !!!!!!!!!ANY IDEA OR ANY HELP THnk's one more time again for your help :rolleyes::rolleyes:

[tendriver]

HI TENDRIVER

THANK YOU FOR YOUR REPPLAY YOU ARE STAR THANK'S FOR YOUR TIME , YES THERE IS NO FILES AT ALL IS EMPTY !!!!!!!!!ANY IDEA OR ANY HELP THnk's one more time again for your help :rolleyes::rolleyes:

What version of TomTom HOME is on your computer?

[omega tdi]

What version of TomTom HOME is on your computer?
hi tendriver
thak's for your repplay ,I'm useing tomtom home 2.5 the latest one , many thank's for your time & repplay

[tendriver]

hi tendriver
thak's for your repplay ,I'm useing tomtom home 2.5 the latest one , many thank's for your time & repplay

With your 910 turned on and connected to you computer, open TomTom HOME and click on "Update my GO". What do you get?

[omega tdi]

With your 910 turned on and connected to you computer, open TomTom HOME and click on "Update my GO". What do you get?
hi tendriver

when I connected to my tomtom home and click on update my go is asking to connect my tomtom and login again .not let me to login to my hom ????but when I go to item in my computer is aloud me to downloud any tom application or any voice ....but there is no any map on my computer !!!!! so what you think ????do you think there is not map on my go that is why not let me to update my go???or what is your opinonn !!!thank you very match for your time many thank's

[tendriver]

hi tendriver

when I connected to my tomtom home and click on update my go is asking to connect my tomtom and login again .not let me to login to my hom ????but when I go to item in my computer is aloud me to downloud any tom application or any voice ....but there is no any map on my computer !!!!! so what you think ????do you think there is not map on my go that is why not let me to update my go???or what is your opinonn !!!thank you very match for your time many thank's

Go to this webpage and download Navcore 8.010. Unzip it into a folder, then open that folder. Copy all the files and folders that are inside and copy them into your 910. Then click on "Update my GO" again.

http://download.tomtom.com/sweet/navcore/navcore_8.010.9369.gox30.cab (http://download.tomtom.com/sweet/navcore/navcore_8.010.9369.gox30.cab)

[omega tdi]

Go to this webpage and download Navcore 8.010. Unzip it into a folder, then open that folder. Copy all the files and folders that are inside and copy them into your 910. Then click on "Update my GO" again.

http://download.tomtom.com/sweet/navcore/navcore_8.010.9369.gox30.cab (http://download.tomtom.com/sweet/navcore/navcore_8.010.9369.gox30.cab)
hi tendriver
thank you for your advise ,but when i finshed and update my go with my tomtom home ,now is say no map is found on my go 910 !!!!!!
DO YOU THINK I MAKE MISTAIK WHEN UN ZIP IT?? I HAVE RAR PROGRAM !! OR WHAT IS THAT MEAN(( NO MAP)) !!!!!,OR DO I HAVE TO DOWNLOUD THE MAP SEPRETLLY ?? THANK YOU VERY MATCH AGAIN FOR YOUR REPPLAY

[tendriver]

hi tendriver
thank you for your advise ,but when i finshed and update my go with my tomtom home ,now is say no map is found on my go 910 !!!!!!
DO YOU THINK I MAKE MISTAIK WHEN UN ZIP IT?? I HAVE RAR PROGRAM !! OR WHAT IS THAT MEAN(( NO MAP)) !!!!!,OR DO I HAVE TO DOWNLOUD THE MAP SEPRETLLY ?? THANK YOU VERY MATCH AGAIN FOR YOUR REPPLAY

That is good. We are making progress. Now with your 910 turned on and connected to your computer, in TomTom Home, click "Add Maps, Traffic, Voices etc", then "Maps". If it shows a map located on "My Computer", then click the add button.

[pilotman]

Strange one!
Try deleting the entire folder Navcore.8.204.9718@tomtom.com from Home Or putting it in another folder called Store or something so Home doesn't see it and replace it with this ready made patched one.

http://rapidshare.com/files/164940398/Navcore.8.204.9718_tomtom.com.rar

the path is :

XP Users:

Home v2.2 - x.x :-
C:\Documents and Settings\????\ApplicationData\TomTom\HOME\Profiles \????.default\extensions\Navcore.?.?????@tomtom.co m

Vista Users:-

C:\Users\???????\AppData\Roaming\TomTom\HOME\Profi les\?????????.default\extensions\Navcore.?.?????@t omtom.com

I must be missing the obvious since no one else seems to be having trouble with tthome and connecting to a computer. I followed your suggestion and kept track of my steps - and still failed. Here's what I did (sorry for the detail):

1. Attach the 910 to the computer
2. Open the 910 in win explorer. .bif file has version 7903, .bak file has version 7903, ori file has version 8204
3. eject the 910
4. disconnect the 910 (yellow bar loads across bottom)
5. turn off 910
6. Copy the folder you reference above (navcore.8.204...) into the extensions folder.
7. turn on 910 (it's not connected to computer; the screen display is the language selection menu).
8. Pin reset the 910
9. turn on 910 again (yellow bar loads), legal notice splash appears, [I agree], 910 starts normally
10. turn off 910
11. Start TTHome; select "Operate My Go"; connect 910, turn on 910
12. TTHome says " Home needs to d/l file", [Yes]
13. File loads and language screen appears - same as in step 7)
While file is loading, I watch the extensions folder and see folders for v7162, v7900, and 7903 appear. Folders v7162 and v7900 are empty.
14. Select [Done]; eject; disconnect (yellow bar loads);
15. 910 waits, then displays language screen
16. Turn off 910
17. Turn on 910; language screen appears; pin reset; turn on and all is ok again although this time I have to do a pin reset twice.

I'm out of ideas on this - but at least the 910 works beautifully when I need it. I just have to keep a paper clip handy ;)