TomTom v8 Firmware and Maps

[Cozz]

I have the correct meta code in the meta.txt (I suppose).

I have exactly this written in meta.txt in the "progs" folder ; Western_and_Central_Europe_2GB_815_2034
CC 93 89 28 2D 2D 95 78 D7 CA DA B9 76 6F A6 B1 Western_and_Central_Europe_2GB-22.meta

I have an other suspicion: I have NOD32 Smart Security and COMODO firewall installed. Does it affect the progress of this "easyusetools" ?

Don't really know unless you leave the meta.txt file open on notepad or something while running the software. I don't see how you're getting these issues if you're doing everything on the C drive.How about trying a different PC.

[msubedar]

I downloaded, but it still doesnt work. :(

Just a suggestion, instead of putting it into the insert_meta_from_map folder, try creating the .meta.dct file in the folder called RunMeForAllAutomatic, it works a treat for me.

Mo

Read the message below!!!

[msubedar]

I downloaded, but it still doesnt work. :(

Just a suggestion, instead of putting it into the insert_meta_from_map folder, try creating the .meta.dct file in the folder called In_Case_of_Emergency and press the RunMe icon and follow the steps, it works a treat for me. (I usually enter in my Device code)

Mo

[Ondodo]

The .pna conains the following:

ID=Western_and_Central_Europe_2GB.pna
1161146069
815
build=2034
id=225369

As I can see, I have the correct map.

Yeah, I tried to do all this progress on my Tomtom device and on my pc as well. Neither worked.

I've written my device number properly in the DeviceID.txt file.

@Cozz: I have the same idea, I'll try it on an other computer today or tomorrow, and I'll tell you the results...

[msubedar]

The .pna conains the following:

ID=Western_and_Central_Europe_2GB.pna
1161146069
815
build=2034
id=225369

As I can see, I have the correct map.

Yeah, I tried to do all this progress on my Tomtom device and on my pc as well. Neither worked.

I've written my device number properly in the DeviceID.txt file.

@Cozz: I have the same idea, I'll try it on an other computer today or tomorrow, and I'll tell you the results...

Just for you mate, i downloaded the same EasyTools as you are using, I copied over my Western & Central Europe 2GB Map .meta & .pna files with the correct meta notepad file, ran the same easytools from the folder insert_meta_from_Map_here and did RunMeForDCT and it created a .meta.dct perfectly with my correct Device Code so i think you are either doing something wrong, or something up with your meta notepad file or it could just be your computer.

Mo

[Ondodo]

Thank you. It was nice from you. And coul you write down here the meta code, that you are using?

[msubedar]

Thank you. It was nice from you. And coul you write down here the meta code, that you are using?

; Western_and_Central_Europe_815_2003
F1 12 49 87 97 17 D8 02 01 AC 1B 7E C2 5F 29 23 Western_and_Central_Europe-19.meta

Western and Central Europe 815 2003 - Check what version you map is.

[msubedar]

; Western_and_Central_Europe_815_2003
F1 12 49 87 97 17 D8 02 01 AC 1B 7E C2 5F 29 23 Western_and_Central_Europe-19.meta

Western and Central Europe 815 2003 - Check what version you map is.

; Western_and_Central_Europe_2GB_815_2034
CC 93 89 28 2D 2D 95 78 D7 CA DA B9 76 6F A6 B1 Western_and_Central_Europe_2GB-22.meta - I think this is your map version so this is the correct meta code for your map.

Mo

[Ondodo]

Yeah, Ive got the meta.txt with this metacode, so the problem is not this. :(

Again: I copy the .meta and the .pna files in the "insert_meta_from_Map_here". Then I click "RunMeForDCT.cmd". A window panel comes up, where I choose option #1.
And again #1.

It writes: ### Run fake meta.txt check ###

Then writes: ACCES DENIED.

And closes itself.

NO .meta.dct has been created. :(

WHAT THE HELL IS THE PROBLEM? :( :( :(

But thank you again for your tryings! :)

[msubedar]

Yeah, Ive got the meta.txt with this metacode, so the problem is not this. :(

Again: I copy the .meta and the .pna files in the "insert_meta_from_Map_here". Then I click "RunMeForDCT.cmd". A window panel comes up, where I choose option #1.
And again #1.

It writes: ### Run fake meta.txt check ###

Then writes: ACCES DENIED.

And closes itself.

NO .meta.dct has been created. :(

WHAT THE HELL IS THE PROBLEM? :( :( :(

But thank you again for your tryings! :)

If it is not the code then it could be the layout of the code, i think it has to be exactly like i am giving it to you, the first part on the first line which is the Map name etc then on the second line the code. If that is correct then the only other thing that i can think of is your .pna & .meta files but i doubt there will be anything wrong with them.

Mo.

[Bungie]

Yeah, Ive got the meta.txt with this metacode, so the problem is not this. :(

Again: I copy the .meta and the .pna files in the "insert_meta_from_Map_here". Then I click "RunMeForDCT.cmd". A window panel comes up, where I choose option #1.
And again #1.

It writes: ### Run fake meta.txt check ###

Then writes: ACCES DENIED.

And closes itself.

NO .meta.dct has been created. :(

WHAT THE HELL IS THE PROBLEM? :( :( :(

But thank you again for your tryings! :)

Is the pc that you are using - running Vista ? ... if so set up the administrator rights before running the meta dct program. Perhaps thats the problem.

[Ondodo]

No, its not vista, its XP SP3, and I have admin rights. :(

[rytenuff]

This is only a solution to the immediate problem.

@Ondodo PM your device code to msubedar.

@msubedar. Make a DCT using Ondodo's PM device code.
Upload it to http://www.2shared.com/ and PM the link to Ondodo.

@Ondodo Download and place the DCT file in your map folder. The map is now patched.

[msubedar]

This is only a solution to the immediate problem.

@Ondodo PM your device code to msubedar.

@msubedar. Make a DCT using Ondodo's PM device code.
Upload it to http://www.2shared.com/ and PM the link to Ondodo.

@Ondodo Download and place the DCT file in your map folder. The map is now patched.

Thanks Rytenuff, i've already done it.

Mo

[rytenuff]

I just noticed you have a different map to him 2003 instead of 2034?

[msubedar]

I just noticed you have a different map to him 2003 instead of 2034?

I know, i got him to send me his .pna and .meta files so i could create his .meta.dct.

[rytenuff]

Nice. That's what this forum should be about.

[oldgit9]

update:
i installed navcore v8.204, put the new ttsystem file in the root and deleted and replaced the map that i had. not sure why...just did.

the new screen icons and colours are a lot better. and the main thing, the VR now works :) but not for long :( i read somewhere in this thread (can't remember where...i've read so many pages in the last few days...lol) that the tomtom home patch for v8.300 was the same as the v8.204 patch. so i decided to connect mt TT to tomtom home. in the updates, it told me that i needed to do a system update. stupidly i did it. i then boot up the TT and i was met with the red screen and "the map can not be used" txt.

so not being fazed by this, i found the new navcore v8.320 (posted by "tendriver" in post #902 and the patches for it in post #904) and decided to install that. as it had the tomtom home patches.

installed navcore v8.320 and installed all the patches. and my TT is now on v8.320 with v815_2003 uk maps. and yes, the VR still works. but, there is no main screen icon :( like there was on v8.204. and the only way i could opperate it from the main screen, was to enable "navigate to spoken address" in the "quick menu pref'". which is no good if you want to opperate the TT by voice like you can on v8.204.

so i have decided to revert back to v8.204 and either try and find the TT home patches or try and make myself in easyusetools.

when i fianlly get it all working agian, i will complie all the files/folders that i used and post a link to it on here. as you never know, someone els might find it usefull. sorry guys for long arse post...

[pilotman]

update:
...

so i have decided to revert back to v8.204 and either try and find the TT home patches or try and make myself in easyusetools.

when i fianlly get it all working agian, i will complie all the files/folders that i used and post a link to it on here. as you never know, someone els might find it usefull. sorry guys for long arse post...

I'm running 8.204 with 815.2003 maps but had trouble connecting correctly to tthome. Look at post #1315 on this thread; the suggestion there is what solved the problem for me. Good luck.

[oldgit9]

I'm running 8.204 with 815.2003 maps but had trouble connecting correctly to tthome. Look at post #1315 on this thread; the suggestion there is what solved the problem for me. Good luck.

thanks for that...im downloading the folder now. and it will save me making the patch. i'll let you all know how i get on.

[oldgit9]

unfortunately, that file that you suggested didn't work for me...so i done some digging around and found one that did work. the only problem i might get, is when i check for updates, it keeps on trying to make me install the "TomTom Application for Go520 / Go720 / Go920". and i have learned from today's experience, installing that, will update the navecore to v8.300 (official). i will just have to remember to deselect it when i do any updates.

i have now compiled all the files/folders that i used into one .rar folder to make life a bit easier for people who wish to install v8.204 onto their system.

you can download it from "HERE (http://rapidshare.com/files/180869344/TomTom_navcore_v8024.9718_folders.rar)".

[Ondodo]

Hi everyone!

I tried this all method on an other machine, and it worked! Only my machine doesn't "like" this easyusetool prog! :D I dont know what to say...
Some info about my machine: MSI K8N SLI (nForce4 SLI chipset), 2x 512MB GEIL ram, AMD Athlon xp 3200+ (venice core), Asus 6600 GT...etc. but I dont think so that the problem is my hardware. And I thought that I'm the stupid... :D

I'm using Windows XP SP3, and my suspicion is: I'm using NOD32 Smart Security and COMODO firewall. Although I switched them off, it didnt solve the problem, so I still cant use this easyusetool to create a ".meta.dct" on my PC!

I dont want you to solve the problem, of course, I just wanted to tell you this strange thing.

Thanks to ALL, who tried to solve my problem. (but it seems that my pc/op system/security program is the wrong)

[tendriver]

unfortunately, that file that you suggested didn't work for me...so i done some digging around and found one that did work. the only problem i might get, is when i check for updates, it keeps on trying to make me install the "TomTom Application for Go520 / Go720 / Go920". and i have learned from today's experience, installing that, will update the navecore to v8.300 (official). i will just have to remember to deselect it when i do any updates.

i have now compiled all the files/folders that i used into one .rar folder to make life a bit easier for people who wish to install v8.204 onto their system.

you can download it from "HERE (http://rapidshare.com/files/180869344/TomTom_navcore_v8024.9718_folders.rar)".

I just got home. Downloading from your PM now. I went from Nav 8.300 to 8.204 0n my 720. TTHOME has never tried to reinstall 8.300.

[tendriver]

Hi everyone!

I tried this all method on an other machine, and it worked! Only my machine doesn't "like" this easyusetool prog! :D I dont know what to say...
Some info about my machine: MSI K8N SLI (nForce4 SLI chipset), 2x 512MB GEIL ram, AMD Athlon xp 3200+ (venice core), Asus 6600 GT...etc. but I dont think so that the problem is my hardware. And I thought that I'm the stupid... :D

I'm using Windows XP SP3, and my suspicion is: I'm using NOD32 Smart Security and COMODO firewall. Although I switched them off, it didnt solve the problem, so I still cant use this easyusetool to create a ".meta.dct" on my PC!

I dont want you to solve the problem, of course, I just wanted to tell you this strange thing.

Thanks to ALL, who tried to solve my problem. (but it seems that my pc/op system/security program is the wrong)

I had your same problem several months ago. I ran a "clean-up" program to clean out a bunch of junk stuff & VOILA, problem solved.

[oldgit9]

I just got home. Downloading from your PM now. I went from Nav 8.300 to 8.204 0n my 720. TTHOME has never tried to reinstall 8.300.

every time i check the updates on TTHome, the v8.300 update is always there. i've got to deselect it every time. otherwise it will install it. it's not that much of a pain for me. as i have three voices wanting to be installed and i always have to deselect them before i do an update. so one more wont harm...lol

[tendriver]

every time i check the updates on TTHome, the v8.300 update is always there. i've got to deselect it every time. otherwise it will install it. it's not that much of a pain for me. as i have three voices wanting to be installed and i always have to deselect them before i do an update. so one more wont harm...lol

I have 2 puter voices on mine, it never tries to add more. The "outsourced.bin" folder is only needed in devices with small internal memory. You shouldn't have it in your 920. Also go to the extensions folder where you put the 8.204@tomtom.com (8.204@tomtom.com) folder and delete the older @tomtom.com folders. Sorry I didn't catch you before you tried Nav 8.320. Since I posted the links to it, I have learned that it is a "working" version & is not even in distribution yet.

[oldgit9]

update:
i've just deleted the "outsourced.bin" folder. and by the looks of things, having it on there didn't make much of a difference. when i copied over the 8.204@tomtom.com folder, i made sure that i deleted the older folder first. but i still get home asking me to install three other voices and the "tomtom application". it's not a bother. i'll just ignore them.

[gaz4660]

TomTom + Map of Western & central Europe for Truck

Includes
Navcore 8.070 9589
Western and Central Europe 815 - 2112

DLC LINK

PASSWORD fromblacki

TomTom Karte von West- und Mitteleuropa Truck v.8.15.2112

TomTom WORK introduces connected navigation

Connected Navigation = Navigation + Communication + Vehicle Management

Connected Navigation helps you to improve management and control of your vehicles and drivers and offers easy two-way communication and navigation for your people on the road and in the office.

TomTom WORK offers Connected Navigation solutions combining plug and play management technology with smart navigation and communication tools. All you need is a mobile navigation system connected to the web-based TomTom WEBFLEET vehicle management and communication service. No special software or interference from IT is needed. Therefore TomTom WORK is for any sort and any size of fleet.

Surveil and guide your vehicles and staff, manage and plan your business (http://www.ipmart-forum.com/showthread.php?t=226076&page=32#), communicate with your drivers and help them to find their way the easy way!

TomTom WORK: Plan your day the easy way!
TomTom WORK brings:

Smart and efficient tracking, tracing and planning
View your vehicles in real time on street level maps and know the exact locations. Identify where the vehicle is located against your planning and pick the best vehicles to manage a new task.

Easy and clear navigation
Navigation by order with destination address makes the driver's job a lot easier and less stressfull.

Two way communication
Send (standard) text messages (http://www.ipmart-forum.com/showthread.php?t=226076&page=32#) from and to the office, give client orders and locations or send tasks with navigation coordinates via the PC (http://www.ipmart-forum.com/showthread.php?t=226076&page=32#) in the office to the drivers. Simple and Quick!

Professional reporting
Make automatic logbooks of driving time, times of standstill and habits for tax, for KM registration, pay roll and expense accounting. Receive daily, weekly or monthly reports containing exact data your company requires.
Hi THEPHONEJUNKY, Have you used this map and Navcore yourself. Do you drive a truck. have you found it usfull

Garry

[tendriver]

update:
i've just deleted the "outsourced.bin" folder. and by the looks of things, having it on there didn't make much of a difference. when i copied over the 8.204@tomtom.com folder, i made sure that i deleted the older folder first. but i still get home asking me to install three other voices and the "tomtom application". it's not a bother. i'll just ignore them.

Install the 3 other voices, then on page 2 of TTHOME, Remove Items, Items on Device, Voices, remove any voices that you don't plan on using. They will still be on your puter, so TTHome shouldn't try to install them again.

[tendriver]

update:
i've just deleted the "outsourced.bin" folder. and by the looks of things, having it on there didn't make much of a difference. when i copied over the 8.204@tomtom.com (8.204@tomtom.com) folder, i made sure that i deleted the older folder first. but i still get home asking me to install three other voices and the "tomtom application". it's not a bother. i'll just ignore them.


Install the 3 other voices, then on page 2 of TTHOME, Remove Items, Items on Device, Voices, remove any voices that you don't plan on using. They will still be on your puter, so TTHome shouldn't try to install them again.

[msubedar]

I just got home. Downloading from your PM now. I went from Nav 8.300 to 8.204 0n my 720. TTHOME has never tried to reinstall 8.300.

every time i check the updates on TTHome, the v8.300 update is always there. i've got to deselect it every time. otherwise it will install it. it's not that much of a pain for me. as i have three voices wanting to be installed and i always have to deselect them before i do an update. so one more wont harm...lol

I upgraded my 520 from NC 8.300 then to 8.320 and then to 8.204 and everytime i go to update my TomTom there it always asks me to Install NC 8.300 and a few voices, not much of a problem i just untick them all everytime and just download the mapshare and the quickgps updates. Would be cool if there was a fix for this though.

Mo.

[oldgit9]

i've just been messing around with my new TT firmware to see whats new etc. and i've got a few minor issues.

1. just as a test, i connected my phone to the TT via bluetooth and sent myself a txt msg from the TT. the msg was sent and my phone got it instantly. but for some reason, my TT failed to recognise that i received a txt msg. is there a reason for this? i would like to get this working again? as it's one on the reasons why i got a 920.

2. i tried to check the local weather using the "tomtom weather" in TT services and it failed to connect. it just went back to the front screen. so i assumed that my TT was not logged in. so i tried to access "My TomTom account" in TT services" and every time i press the button, nothing happens. now is this some of security for us, to not connect to the tomtom network and for them to see that we have hacked and are using patches software? i can understand if it is. but if it's not, can i get it working again? i've just noticed at the bottom of the "TT services" screen, my TT username is displayed. so i should be able to log in somehow???

[oldgit9]

sorry double post for some reason???

[tendriver]

i've just been messing around with my new TT firmware to see whats new etc. and i've got a few minor issues.

1. just as a test, i connected my phone to the TT via bluetooth and sent myself a txt msg from the TT. the msg was sent and my phone got it instantly. but for some reason, my TT failed to recognise that i received a txt msg. is there a reason for this? i would like to get this working again? as it's one on the reasons why i got a 920.

2. i tried to check the local weather using the "tomtom weather" in TT services and it failed to connect. it just went back to the front screen. so i assumed that my TT was not logged in. so i tried to access "My TomTom account" in TT services" and every time i press the button, nothing happens. now is this some of security for us, to not connect to the tomtom network and for them to see that we have hacked and are using patches software? i can understand if it is. but if it's not, can i get it working again? i've just noticed at the bottom of the "TT services" screen, my TT username is displayed. so i should be able to log in somehow???

Are not weather, google, traffic, etc. paid services?

[oldgit9]

Are not weather, google, traffic, etc. paid services?

the traffic, google, fuel prices are. but when i was on v8.300 and below, i could view the weather forecast where i was, at my destination etc. but for some reason i cant now. i've been on TT's web site to see they have upgraded the service to a paid service, but i cant fint it anywhere on there. and there is nothing in the help section...i did consider calling or email TT....but i then remembered, that my TT is now hacked...lol

i'll do another search on there and in google to see whats going on.

[msubedar]

Are not weather, google, traffic, etc. paid services?

Yeah they are, you have to pay a monthly subscription to get them i'm afraid. :mad:

[tendriver]

sorry double post for some reason???

If this is a question to me, my puter "hiccupped" on the first post. Sorry folks.

[oldgit9]

If this is a question to me, my puter "hiccupped" on the first post. Sorry folks.

lol...no mate...for some reason, when i posted the post above that one, it decided to make two posts exactly the same....so i edited the second post...sorry for the confusion.

[tendriver]

the traffic, google, fuel prices are. but when i was on v8.300 and below, i could view the weather forecast where i was, at my destination etc. but for some reason i cant now. i've been on TT's web site to see they have upgraded the service to a paid service, but i cant fint it anywhere on there. and there is nothing in the help section...i did consider calling or email TT....but i then remembered, that my TT is now hacked...lol

i'll do another search on there and in google to see whats going on.

http://www.tomtom.com/services/service.php?id=18 (http://www.tomtom.com/services/service.php?id=18)

[oldgit9]

http://www.tomtom.com/services/service.php?id=18 (http://www.tomtom.com/services/service.php?id=18)

i just found the same page as you have, at the same time you posted this...i must have had a free trial or something. because i have definitely used it in the past...but i can't remember when.

now to search how to fix my txt msg problem :(

[oldgit9]

sorry guys....somehow the txt messages work now...i didn't do anything...honestly...it just decided to work by itself...lol i must have a ghost in the system...lol

[msubedar]

sorry guys....somehow the txt messages work now...i didn't do anything...honestly...it just decided to work by itself...lol i must have a ghost in the system...lol

I wished all problems just decided to work by itself...lol

[THEPHONEJUNKY]

Hi THEPHONEJUNKY, Have you used this map and Navcore yourself. Do you drive a truck. have you found it usfull

Garry

Hi

Yes i am a truck driver but no i have not tried this yet as i no need for it as i just use latest maps with p.o.i for weight limits, low bridges ect.

i may get round to trying it when i get a better sat nav with bluetooth and other functions.

[rytenuff]

I'm not a truck driver either but I have tried it and also for a friend. We tried a route that he knows is suitable for a car but not for a large truck. When we selected "Car" it took us on the shortest route for a car. When we selected a truck ( he put in the dimensions) it took us the correct way ( slightly longer) for a truck of this size.
I have read on other forums comments from truck drivers who say, although it is not perfect ( it is only v1 ) it has a lot of potential and they mostly like it.
"Work" needs to be paid for.

[oldgit9]

i have now updated the navcore v8.204 folder that i made.

change log:
removed "Outsourced.bin" folder. not needed on x20+ systems.
updated readme file.

info:
The Navcore V8.204 comes in two versions and the 540-740 version is not very stable on some TomTom models so this is the better
940 version which gets rid of the errors that are in the other version of the Navcore.

thanks to tendriver and msubedar for the info. cheers :)

Download it from "HERE (http://rapidshare.com/files/181234084/TomTom_navcore_v8024.9718_folders.rar)"

[rytenuff]

i have now updated the navcore v8.204 folder that i made.

change log:
removed "Outsourced.bin" folder. not needed on x20+ systems.
updated readme file.

info:
The Navcore V8.204 comes in two versions and the 540-740 version is not very stable on some TomTom models so this is the better
940 version which gets rid of the errors that are in the other version of the Navcore.

thanks to tendriver and msubedar for the info. cheers :)

Download it from "HERE (http://rapidshare.com/files/181234084/TomTom_navcore_v8024.9718_folders.rar)"

You had already uploaded the 940 version in your ORIGINAL upload. The old and new 8.204 are identical.
The differences in the 540/740 version is minimal in any case. I can't see why it would be unstable?
The differences are:
940
In Bin folder
mp3d 116 KB (for mp3 use)
obexftpd 342 KB
syncml 2.03 MB
In root
fm2010parameters 380 bytes (for FM use)
fmsignal 25.8 KB (for FM use)

( Do the 540/740 make use of FM?)

540/740
In Bin folder
mp3d (omitted)
obexftpd 342 KB
syncml 2.03 MB
fm2010parameters (ommited)
fmsignal (ommited)
All other files are exactly the same.
The original ttsystem files are identical in size and date created and is replaced by the cracked one by TTuser in any case.
Some devices need the outsourced files to work as they don't have enough RAM on board, the ONES e.g. and switchfiles can make a difference to the lesser devices too.

[rytenuff]

http://download.tomtom.com/sweet/navcore/navcore_8.204.9718.go540-go740.cab
http://download.tomtom.com/sweet/navcore/navcore_8.204.9718.go940.cab

Switchfiles for 8.204: http://www.2shared.com/file/4608885/7aeafff9/switch_update_for_8204.html

[calendrier]

hello, I search the map: western europe 8.15
and:ttsystem pacth

thank you

[rytenuff]

The latest TTuser version of NC 8.204
"04.01: 8204 rev1.4: advanced Onscreen Messages; advanced "runcheck"; fixes for not intended(irrelevant) Behavior"
The link for this is posted here:
http://forum.gsmhosting.com/vbb/showpost.php?p=4035106&postcount=1415

[gadgetathome]

Hi All,

Here we are it's that time again, here are the latest Safety Camera from tomtom.....

Enjoy

:)

[m0j01639]

For those having difficulty with cracking a map.


NEWB here! Thanks for the information guys. I read the whole post front to back a couple of times. Turns out it was fairly simple to get the maps working.

1)Downloaded cracked navcore 8.024 - works excellent on the 920
2)Copied the navcore files to the TT
3)Downloaded a map North America 8.15
4)Unrar'd map to a folder titled (North_America)
5)Used easytools to in the manner you specified in your post.
6) Yatzee

One question - I haven't tried to use tthome to update. I have the file I'm just not sure where the Dll file goes???

Anyone have an answer. Also I have a traffic subscription (ANT) will the cracked navcore allow me to bypass that subscription? I read in here that traffic subscription is actually held in the ANT. Is that true.

Nonetheless I pretty happy thanks guys.

[THEPHONEJUNKY]

Does anyone have trouble with 8.024 when trying to get address using postcodes.

My TomTom one Europe 22 Freezes up when i tap postcode to find address so i have gone back to 8.010.

Also is it possible to add start up sound and shutdown sound to 8.010 as it says it is not compatible with my system but it worked with 8.024, So can i take the folders from 8.024 and add to 8.010.

Thanks

[rytenuff]

Does anyone have trouble with 8.024 when trying to get address using postcodes.

My TomTom one Europe 22 Freezes up when i tap postcode to find address so i have gone back to 8.010.


Solution is to select small keyboard and qwerty, not abcde. I had the same problem on my One v2.

[addadutta]

TomTom Map Patcher
------------------

http://i36.tinypic.com/vzaufs.gif

Detects current Version running and warns you if problems:

http://i38.tinypic.com/6jjdxy.gif

Fully upgradable shell interface which allows updates for meta.txt and new script files

TomTom Map Patcher (Free Edition)
Space Needed: 7MB
This link is only available for Registered Users

Thanks
B.u Mobiles







The link http://www.2shared.com/file/4303305/39aa8ca2/TomTom_Map_Patcher__Free_Edition_.html is not working. Can oyu reload the same?

[oldgit9]

The link http://www.2shared.com/file/4303305/39aa8ca2/TomTom_Map_Patcher__Free_Edition_.html is not working. Can oyu reload the same?

it works fine for me. and i downloaded it again just to make sure.

sometimes, the "2shared" server is busy. keep on trying and it will download for you.

[tendriver]

The link is not working. Can oyu reload the same?

By posting the link, you have made this available to EVERYBODY!!!!!!!!!!! :mad::mad::mad:

[tendriver]

The link (http://www.2shared.com/file/4303305/39aa8ca2/TomTom_Map_Patcher__Free_Edition_.html)is not working. Can oyu reload the same?

it works fine for me. and i downloaded it again just to make sure.

sometimes, the "2shared" server is busy. keep on trying and it will download for you.


By replying to the post, you have also made this available to EVERYBODY!!!!!!!!!!!!!! :mad::mad::mad:

[tendriver]

One question - I haven't tried to use tthome to update. I have the file I'm just not sure where the Dll file goes???

Anyone have an answer. Also I have a traffic subscription (ANT) will the cracked navcore allow me to bypass that subscription? I read in here that traffic subscription is actually held in the ANT. Is that true.

Nonetheless I pretty happy thanks guys.[/quote]

Can't answer your TTHOME question without knowing what OS your puter is running.

[rytenuff]

8204-9718 ver 1.4 files from ttuser. Courtesy of Buercky.


http://rapidshare.com/files/181411124/8204_9718ver14.part1.rar
http://rapidshare.com/files/181411132/8204_9718ver14.part2.rar
http://rapidshare.com/files/181411119/8204_9718ver14.part3.rar
http://rapidshare.com/files/181411129/8204_9718ver14.part4.rar
http://rapidshare.com/files/181410695/8204_9718ver14.part5.rar

[tendriver]

8204-9718 ver 1.4 files from ttuser. Courtesy of Buercky.


http://rapidshare.com/files/181411124/8204_9718ver14.part1.rar (http://rapidshare.com/files/181411124/8204_9718ver14.part1.rar)
http://rapidshare.com/files/181411132/8204_9718ver14.part2.rar (http://rapidshare.com/files/181411132/8204_9718ver14.part2.rar)
http://rapidshare.com/files/181411119/8204_9718ver14.part3.rar (http://rapidshare.com/files/181411119/8204_9718ver14.part3.rar)
http://rapidshare.com/files/181411129/8204_9718ver14.part4.rar (http://rapidshare.com/files/181411129/8204_9718ver14.part4.rar)
http://rapidshare.com/files/181410695/8204_9718ver14.part5.rar (http://rapidshare.com/files/181410695/8204_9718ver14.part5.rar)

I posted a question to TTUser, asking what the specific changes are in ver1.4. IF I get an snswer, I'll post it here.

[rytenuff]

The changelog gives you an idea of what is new. Maybe it would be an idea to post that here?
I have just got a 720 and things work smoothly with that but I am trying not to forget about all the hoops you need to jump through in order to get the more basic devices to use Navs (like 8.204) they were never designed to use.
Lots of people on here use these so I will try to remember that when posting.
i.e. (ONES )Outsourced folder so there is enough RAM to work. Change to small keyboard, use qwerty not ABCDE to enable navigate by postcode and map co-ordinates. Change the ttsserver in order to use VocalizerTTS, etc.

[tendriver]

The changelog gives you an idea of what is new. Maybe it would be an idea to post that here?
I have just got a 720 and things work smoothly with that but I am trying not to forget about all the hoops you need to jump through in order to get the more basic devices to use Navs (like 8.204) they were never designed to use.
Lots of people on here use these so I will try to remember that when posting.
i.e. (ONES )Outsourced folder so there is enough RAM to work. Change to small keyboard, use qwerty not ABCDE to enable navigate by postcode and map co-ordinates. Change the ttsserver in order to use VocalizerTTS, etc.

I know. I quoted the changelog in my post to TTUser and asked him to be more specific. As you can see below, it doesn't offer much info.

Changelog: from TTUser
04.01. 8204 rev1.4: advanced Onscreen Messages; advanced "runcheck"; fixes for not intended(irrelevant) Behavior

[rytenuff]

I meant the entire Changelog;
04.01. 8204 rev1.4: advanced Onscreen Messages; advanced "runcheck"; fixes for not intended(irrelevant) Behavior
30.11. 8204 rev1.3.3: 1 fix; 1 new Helptext ; 1 new Feature
29.11. 8204 rev1.3: change ttsserver direct to a other, original nonetheless supplied; fix a few unimportant Issue
22.11. 8204 rev1.2: extended Outsource; Boothelpmessage disabled, switch on with viewmsg; other minor Improvements
16.11. 8204 rev1.1: revised cleaning, rm, btoff, etc. take no effect without runclean, this works now separate
11.11. new 8.204.9718, one "original", one for x20,x30,910; Cleaning now reversed, Standard disabled, because original is there no cleaning more, switch it again on with "runclean", with Outsourced.bin almost useless to run a cleaning

[msubedar]

@rytenuff & tendriver@ - Is the new version upgrade of Navcore 8.204 1.4 an upgrade worth doing I have been asked by some people with the X20 & X30 Series who already have 8.204 installed on their TT's???

Mo.

[tendriver]

@rytenuff & tendriver@ - Is the new version upgrade of Navcore 8.204 1.4 an upgrade worth doing I have been asked by some people with the X20 & X30 Series who already have 8.204 installed on their TT's???

Mo.

I don't know. That is why I asked for more info from TTUser. It appears that the change is only in the ttsystem file & switchfiles. I dropped the rev1.4 ttsystem file in my 720 and see no difference.

[rytenuff]

TTuser is never very forthcoming with explanations. :) If he has seen fit to continue development he obviously had reason. It may just be he was trying to make it work better on more devices, not just the higher end models.
The "runcheck" examines your device and verifies if things are found or missing. Could be helpful if you have overlooked something in your install so that some aspect it is not working as you expect.
30.11. 8204 rev1.3.3: 1 fix. Something wasn't right before obviously but he didn't say what.
For all the time it takes I think it's worth the effort to try it.

[msubedar]

TTuser is never very forthcoming with explanations. :) If he has seen fit to continue development he obviously had reason. It may just be he was trying to make it work better on more devices, not just the higher end models.
The "runcheck" examines your device and verifies if things are found or missing. Could be helpful if you have overlooked something in your install so that some aspect it is not working as you expect.
30.11. 8204 rev1.3.3: 1 fix. Something wasn't right before obviously but he didn't say what.
For all the time it takes I think it's worth the effort to try it.

It's a good point I guess just to try it out!

[tendriver]

I don't know. That is why I asked for more info from TTUser. It appears that the change is only in the ttsystem file & switchfiles. I dropped the rev1.4 ttsystem file in my 720 and see no difference.

The switchfiles.zip is dated 1/4/09, however, the Config folder, the only thing inside switchfiles.zip, does not contain any updated files, based on the file dates.

[rytenuff]

The switchfiles.zip is dated 1/4/09, however, the Config folder, the only thing inside switchfiles.zip, does not contain any updated files, based on the file dates.


That depends on what you are comparing it to.
If you are using the original release of SE 8.204 from 11th Nov. '08 then the new files would be viewmsg, SDid, runcheck in SE 8.204. rev 1.4 The switchfiles are 0KB They are only a means to access the ttsystem
The ttsystem has had corresponding changes made to enable these features as well as other improvements and fixes. i.e. the rev 1.4 ttsystem is not the same as the first release either.
(See the Changelog)
There is, or was another RAR named switch_update which is necessary to use the SdkRegistry folder and the features it offers. For example I use the movepix feature which allows me to take a snapshot of my tomtom screen and move it to the inbuilt viewer for example.

[rytenuff]

BTW 1/4/09 means 1st April '09 in many parts of the world! :D

[tendriver]

BTW 1/4/09 means 1st April '09 in many parts of the world! :D

In TTUser's world 1/4/09 means January 1. 2009!! BTW, in some parts of the world peope read right to left & in other parts they read vertically!!! :D:D

[traxxonal]

Hi,
I have navcore 8.204 with UKandROI map 815.2003 which has CSPEECH_GBR.dat and CSPEECH_IRL.dat files in the map folder. However, the voice control preferences menu item is greyed out under change preferences. How do i activate Voice control.

thank you

[rytenuff]

Have you loaded the ASR folder? Do you have a file support_asr.dat in that folder? What size are the CSPEECH_GBR.dat and CSPEECH_IRL.dat files ? What device do you have?

[cricriback]

i have 815.2024 France and 815.2096 central western Europe and I n arrives always not there!!!!
I stick my new card ds my tomtom
I puts my .pna and my .meta ds insert_meta_from_Map_here
I double clike on RunMeforDCT.dct it gives me a .dct which
i insere in my card copied previously
I boost(relaunch) and always nothing, it don't appears not c is compatible France 2024 with my v7.903 nevertheless!!!!
even with western 2096!!!
That inflates me

[traxxonal]

Have you loaded the ASR folder? Do you have a file support_asr.dat in that folder? What size are the CSPEECH_GBR.dat and CSPEECH_IRL.dat files ? What device do you have?

Yes there is an ASR folder, support_asr.dat is there.

The Cspeech_GBR.dat = 15,339 KB
The CSpeech_IRL = 1,676 KB

thanks

[rytenuff]

Do you have a computer voice installed, like Kate. Loquendo?

[msubedar]

Your english is a bit difficult to understand!

[rytenuff]

@cricriback
I am afraid your English is difficult to follow.
You have Navcore 7.903? Is it cracked/patched?
You cannot crack or patch it with the keygen EasyUseTools. You need to download an already cracked Navcore.
The pirated patched maps will NOT be seen with a non cracked/patched Navcore.

[rytenuff]

@ msubedar
Your link isn't working : http://flickcabin.com/public/view/full/17989


EDIT: I see you have removed it.

[tendriver]

@ msubedar
Your link isn't working : http://flickcabin.com/public/view/full/17989 (http://flickcabin.com/public/view/full/17989)


EDIT: I see you have removed it.

It's working. Here it is. Thanks MO!!!



http://i42.tinypic.com/2e574oi.jpg

[msubedar]

It's working. Here it is. Thanks MO!!!



http://flickcabin.com/pfiles/17989/Final%20Chart.jpg

No worries, hope it helps!!!

Mo.

[rytenuff]

Perhaps I phrased that wrongly. The original link on the amended post 1580 displayed as a red x.

Maybe you could add a bit to that chart explaining that NONE of these maps will be seen with a Navcore which has NOT been cracked/patched?

[cricriback]

my english is very bad sorry
my map france 815.2024 and my map western 2096 don't work in my tomtom 910 with the v7.903 official
i have Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher !!!!!

[cricriback]

my english is very bad sorry
my map france 815.2024 and my map western 2096 don't work in my tomtom 910 with the v7.903 official
i have Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher !!!!!

first i stick my map in the tomtom
2/ pna et meta in the file insert_meta_from_Map_here
3/ RunMeforDCT.dct in action
4/ i stick the dct in my map in my tomtom
!!!!!!!!!!!!!!!! nothing

[cricriback]

yes it s good with v7.900 and the map 815.2024 and 2096

[rytenuff]

The Easyusetools_for Keygen_Mapcheck_Metacheck_ttsystempatcher !!!!! will NOT patch the v7.903 official. REPEAT NOT!
I am running out of ways to tell you this. IT WON'T EVER WORK .
You need to download a cracked ttsystem file and put it in place of the v7.903 official one.
i.e.
1.Delete the official ttsystem file.
2. Put the CRACKED ttsystem file where the official ttsystem used to be before you deleted it.
I am sorry but if you don't understand that I give up.

[psu1]

Hi all,

This is my 1st post here. I hope its the right thread. With all of the info. here, I was finally able to add map 815 and Nav 8300 to my 720. I did it on a Mac with Virtual PC after many many guesses and failures. Not a Windows genius. :(

It works fine. While searching the net to get some idea if N 8.320 would have additional benefits, I came across a link explaining how to get some 740 features on a 720. I did everything they suggested and it actually worked. No patches were necessary. It was just a matter of replacing files.

One big difference is the improved appearance of the icons. ALG and IQ routing was evident but I had it already after adding map 815. The biggest difference was the number of voice commands available for VR. At least a 100. There are also additional Bluetooth and related TT services available. I don't use them so I didn't spend much time looking at them.

I want to thank everyone here for all of their work in making the many upgrades and patches available. Well again, this upgrade to 740 features did work for me. I hope others can also benefit from these directions.

The link is: http://www.fatwallet.com/forums/hot-deals/892671/?start=460

Go to page 24 and scroll down. It's all pretty obvious.

Good luck!

PSU

[rytenuff]

With reference to the 815.2112 special map for Truck see table above.
cspeech is available with this map but only Netherlands is included. The other countries need these cspeech files for the v815 truck map.

http://www.megaupload.com/pt/?d=WIKF5PMH

[rytenuff]

@psu1

Your mention of 8.320 threw me for a bit until I read the link you gave. You have actually installed 8.204 in your 720. Same as me!

[rytenuff]

BTW the download links in that link on page 24 are the same links that I posted here:
http://forum.gsmhosting.com/vbb/showpost.php?p=4045406&postcount=1562
Small world! :)

[tendriver]

Hi all,

This is my 1st post here. I hope its the right thread. With all of the info. here, I was finally able to add map 815 and Nav 8300 to my 720. I did it on a Mac with Virtual PC after many many guesses and failures. Not a Windows genius. :(

It works fine. While searching the net to get some idea if N 8.320 would have additional benefits, I came across a link explaining how to get some 740 features on a 720. I did everything they suggested and it actually worked. No patches were necessary. It was just a matter of replacing files.

One big difference is the improved appearance of the icons. ALG and IQ routing was evident but I had it already after adding map 815. The biggest difference was the number of voice commands available for VR. At least a 100. There are also additional Bluetooth and related TT services available. I don't use them so I didn't spend much time looking at them.

I want to thank everyone here for all of their work in making the many upgrades and patches available. Well again, this upgrade to 740 features did work for me. I hope others can also benefit from these directions.

The link is: http://www.fatwallet.com/forums/hot-deals/892671/?start=460

Go to page 24 and scroll down. It's all pretty obvious.

Good luck!

PSU

The instructions that you reference on page 24 have been posted on this thread numerous times. Problem is, there are no instructions on your page 24 for adapting the maps, which is required to use an adapted Navcore!!!

[msubedar]

http://i39.tinypic.com/2igyr7n.jpg

The Chart which has been slightly edited, Thanks.

Mo

[Neil Peters]

Hi, I cant seem to find the UK and Eire map, could anyone provide a link please? Thanks

[wannscan]

Hi, I cant seem to find the UK and Eire map, could anyone provide a link please? Thanks

Ive been stuck before mate, try page 61 #901 right at the top. The link is still active please remember to leave thanks to the poster.:)

[psu1]

Rytenuff - Thanks for the kind words. Sorry about the confusion regarding 8320 and 8.204. I was aware that I was moving to 8.204. I referenced 8.320 as this was my original search to see if moving to 8.320 was better than my original patched 8.300. I came across the "740" link as a fluke. I posted after I was successful in getting some of the "740" features. No, I did not see your post regarding the same.

TenDriver - Sorry if I referred to topics previously posted. Not sure what you mean by "no instructions". I followed the 7 steps identified by pmendu and was successful in getting the new features. I already had the patched Navcore 830.9732 and patched Map 815.2019 on the TT720. Again, I never heard of the 740 and after searching, found out that it is a newer unit. Either way I hope others can benefit from the link and potential modifications to their TTs.

PSU1

[pictopicto]

Hi, I cant seem to find the UK and Eire map, could anyone provide a link please? Thanks

Have you tried the search function on this forum?

i found a working link very easily.

i will give it to you on this occasion but please use the forums search function in future before posting.

http://forum.gsmhosting.com/vbb/showpost.php?p=3895135&postcount=499

[rytenuff]

Rytenuff - Thanks for the kind words. Sorry about the confusion regarding 8320 and 8.204. I was aware that I was moving to 8.204. I referenced 8.320 as this was my original search to see if moving to 8.320 was better than my original patched 8.300. I came across the "740" link as a fluke. I posted after I was successful in getting some of the "740" features. No, I did not see your post regarding the same.

TenDriver - Sorry if I referred to topics previously posted. Not sure what you mean by "no instructions". I followed the 7 steps identified by pmendu and was successful in getting the new features. I already had the patched Navcore 830.9732 and patched Map 815.2019 on the TT720. Again, I never heard of the 740 and after searching, found out that it is a newer unit. Either way I hope others can benefit from the link and potential modifications to their TTs.

PSU1

What he means is, that site is aimed at people who have bought an original map. There is no provision for people who have acquired it by other means and wish to patch it for use with the 8.204 upgrade.
All of this including links to the maps, Navcores and how to use them are covered in here already.
BTW If you found ANY of the posts in here helpful it is customary to click on the THANKS button (as was done for you.)

[rytenuff]

http://flickcabin.com/public/view/full/18036

The Chart which has been slightly edited, Thanks.

Mo


Your information differs from the original chart posted on 11thDec '08 here:
http://3dc.supervegeta.free.fr/Map.png by gpsunderground.com

Where is your info obtained from? Is it accurate?
e.g. The info re. cspeech for the special truck map is erroneous in both charts.

[msubedar]

Your information differs from the original chart posted on 11thDec '08 here:
http://3dc.supervegeta.free.fr/Map.png by gpsunderground.com

Where is your info obtained from? Is it accurate?
e.g. The info re. cspeech for the special truck map is erroneous in both charts.

If any mistakes are spotted then please tell me and I will correct the errors.

Thanks, Mo.

PS. Still having difficulty in uploading the chart on here as an image. I can't simply just copy and paste.

[msubedar]

If any mistakes or updates are spotted then please tell me and I will correct the errors.

Thanks, Mo.

http://img340.imageshack.us/img340/614/bestchart2qv5.png

[tendriver]

Way To Go, Mo!!!!!!!

[msubedar]

Way To Go, Mo!!!!!!!

Got there in the end, lol!!!

[rytenuff]

The instructions that you reference on page 24 have been posted on this thread numerous times. Problem is, there are no instructions on your page 24 for adapting the maps, which is required to use an adapted Navcore!!!


The instructions on that thread were actually given by you tendriver to a user called coolguy82 on another forum. He calls himself pmendu on the fat wallet forum. He omitted to credit you on that forum though. Coolguy!!?? :D
Like I said, "Small World".

[tendriver]

the instructions on that thread were actually given by you tendriver to a user called coolguy82 on another forum. He calls himself pmendu on the fat wallet forum. He omitted to credit you on that forum though. Coolguy!!?? :d
like i said, "small world".

THANX, for telling me!!!!!!!!!!!!!! Amazing!!!!!

[addadutta]

I have a Transcend 4GB SD card ( not 4GB SDHC card)for tomtom one xls.
Navcore 8.010 with SE TTsystem 8.010

When the map is loaded (both cracked or original) This is not working and screen is getting hung-up. So I have to reset after removing the card.

But when I am using any 2 GB SD card or not using any card in SD card slot, tomtom is working fine with cracked or original maps.

The card is working fine in my laptop. So I donot think that the card is faulty.

For last 2 days I have done everything possible- using Clearflash tool, reformatting card and tomtom multiple times, using original navcore version etc, but totally fruitlesss.

Please note I have checked the treads in htis forum and ipmart-forum, but caanot resolve the issue till now.

DO anyone faced this and can you guide me on how to overcome this issue?

Many thanks in advance

[rytenuff]

I have read of other people having difficulty with a particular card. I don't remember any answers to it though. Most just accepted that the card didn't like their Tomtom and bought a different one. You could try formatting it with a formatter designed for SD cards. I use this one:

http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html


BTW Which bootloader have you installed. 5.5022?

[msubedar]

I have a Transcend 4GB SD card ( not 4GB SDHC card)for tomtom one xls.
Navcore 8.010 with SE TTsystem 8.010

When the map is loaded (both cracked or original) This is not working and screen is getting hung-up. So I have to reset after removing the card.

But when I am using any 2 GB SD card or not using any card in SD card slot, tomtom is working fine with cracked or original maps.

The card is working fine in my laptop. So I donot think that the card is faulty.

For last 2 days I have done everything possible- using Clearflash tool, reformatting card and tomtom multiple times, using original navcore version etc, but totally fruitlesss.

Please note I have checked the treads in htis forum and ipmart-forum, but caanot resolve the issue till now.

DO anyone faced this and can you guide me on how to overcome this issue?

Many thanks in advance


With 4GB, you need FAT32 format. Also i would strongly recommend that you transfer all the internal memory files to SD card so the tomtom thinks that that is where everything is, this should treat the problem and tomtom should be able to read and write to the card?

So I would say to try and use the card with all your internal files on and removing the internal files off your tomtom, but make sure you create a backup.

Mo.

PS. I would run a CHKDSK though before transferring any files so the card will be fixed of any erros if it has any and all clean.

[BuMobiles]

I have a Transcend 4GB SD card ( not 4GB SDHC card)for tomtom one xls.
Navcore 8.010 with SE TTsystem 8.010

When the map is loaded (both cracked or original) This is not working and screen is getting hung-up. So I have to reset after removing the card.

But when I am using any 2 GB SD card or not using any card in SD card slot, tomtom is working fine with cracked or original maps.

The card is working fine in my laptop. So I donot think that the card is faulty.

For last 2 days I have done everything possible- using Clearflash tool, reformatting card and tomtom multiple times, using original navcore version etc, but totally fruitlesss.

Please note I have checked the treads in htis forum and ipmart-forum, but caanot resolve the issue till now.

DO anyone faced this and can you guide me on how to overcome this issue?

Many thanks in advance

To cut a long story short, Buy a ******* 4GB SDHC or Kingston 4GB SDHC, because you'll have nothing but problems with this Transcend 4GB SD card (these cards are very cheap and poor quality)

Thanks
B.u Mobiles

[msubedar]

To cut a long story short, Buy a ******* 4GB SDHC or Kingston 4GB SDHC, because you'll have nothing but problems with this Transcend 4GB SD card (these cards are very cheap and poor quality)

Thanks
B.u Mobiles

That is honestly probably the best suggestion i guess rather than going through all the hassle, but then I think the TomTom One XLS will need to have the NC upgraded to a higher one than 8.010 in order for the TomTom to read SDHC?

Unless if 8.010 will read SDHC which i'm not sure it does????

http://uk.support.tomtom.com/cgi-bin/tomtom_uk.cfg/php/enduser/std_adp.php?p_faqid=6141&p_created=1156431247&p_sid=Jm3dFLnj&prod_lvl1=141&prod_lvl2=1658&cat_lvl1=215&p_accessibility=&p_redirect=&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfc m93X2NudD0xNCwxNCZwX3Byb2RzPTE0MSwxNjU4JnBfY2F0cz0 yMTUmcF9wdj0xLjE0MTsyLjE2NTgmcF9jdj0xLjIxNSZwX3NlY XJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX2ZubCZwX3BhZ2U9MQ* *&p_li=&p_topview=1

[rytenuff]

I noticed the user was in India. I have no idea of the cost of these cards there and I didn't want to cheerfully suggest that he spends even more money on something which maybe costs too much for him to afford over there.
The system.file i.e. bootloader determines if the device will accept an SDHC card, which is why I asked which bootloader he had installed.

[cpu2007]

Guys I have tried the radaerd on my latest map which is wester and central europe 815, however they dont work . It doesnt show any upcoming safety cameras or autovelox.There were two files in the file that I have downloaded from this site, one called meta and other radars.. I have copied all the content of the radar folder into the map folder of the navigator... Do i need to do something else?

[msubedar]

Guys I have tried the radaerd on my latest map which is wester and central europe 815, however they dont work . It doesnt show any upcoming safety cameras or autovelox.There were two files in the file that I have downloaded from this site, one called meta and other radars.. I have copied all the content of the radar folder into the map folder of the navigator... Do i need to do something else?

You can't simply copy the files into your tomtom, you have to patch the camera files so they can be recognized on your specific tomtom.

1) Download easytools keygen which can be found on page 1 of this thread if you have not already got it.
2) Then copy over all the camera files into the folder called "insert_meta_from_Map_here".
3) From your map folder copy over 2 files which will be called something like "Western_and_Central_Europe.pna" & "Western_and_Central_Europe-19.meta" (MAKE SURE IT IS NOT THE .meta.dct FILE!!!).
4) You will find a Notepad file called "DeviceID", in there enter your full Device ID all upper-case and with no spaces.
5) Then run the command program called "RunMeforDCT" and follow the options - (It will normally be option #1 then option #1 again but just re-check depending on which Navcore you have).
6) After that is done, from the "insert_meta_from_Map_here" folder, copy over all the camera files, NOT ANY OF YOUR MAP FILES!!!
7) Paste them into your map folder and your done!

Mo.

[cpu2007]

You can't simply copy the files into your tomtom, you have to patch the camera files so they can be recognized on your specific tomtom.

1) Download easytools keygen which can be found on page 1 of this thread if you have not already got it.
2) Then copy over all the camera files into the folder called "insert_meta_from_Map_here".
3) From your map folder copy over 2 files which will be called something like "Western_and_Central_Europe.pna" & "Western_and_Central_Europe-19.dct" (MAKE SURE IT IS NOT THE .meta.dct FILE!!!).
4) You will find a Notepad file called "DeviceID", in there enter your full Device ID all upper-case and with no spaces.
5) Then run the command program called "RunMeforDCT" and follow the options - (It will normally be option #1 then option #1 again but just re-check depending on which Navcore you have).
6) After that is done, from the "insert_meta_from_Map_here" folder, copy over all the camera files, NOT ANY OF YOUR MAP FILES!!!
7) Paste them into your map folder and your done!

Mo.
I do have the pna file but i only have the meta.dct file ... i cant finf any file called like you said :(

[msubedar]

I do have the pna file but i only have the meta.dct file ... i cant finf any file called like you said :(

:confused: You must have a file called "Western_and_Central_Europe-19.dct" or maybe it is just called "Western_and_Central_Europe-19". I doubt you will NOT have one because i don't think your TT can work withought one.

[cpu2007]

I have tried in many ways to find it but there is no such file and my tom tom is working perfectly.
these are the file I have in the folder
Western_and_Central_Europe_2GB.pna
Western_and_Central_Europe_2GB-19.meta
and this file is madew by putting the meta file in the keygen
Western_and_Central_Europe_2GB-19.meta.dct

when i run the keygen with all safety cameras files and pna file it does say ok to everyfile but it also says that no meta file found....do i have to put a meta file as well or is just a useless warning?

[tendriver]

I have tried in many ways to find it but there is no such file and my tom tom is working perfectly.
these are the file I have in the folder
Western_and_Central_Europe_2GB.pna
Western_and_Central_Europe_2GB-19.meta
and this file is madew by putting the meta file in the keygen
Western_and_Central_Europe_2GB-19.meta.dct

when i run the keygen with all safety cameras files and pna file it does say ok to everyfile but it also says that no meta file found....do i have to put a meta file as well or is just a useless warning?

Disregard. I has thinking of something else..

[msubedar]

I have tried in many ways to find it but there is no such file and my tom tom is working perfectly.
these are the file I have in the folder
Western_and_Central_Europe_2GB.pna
Western_and_Central_Europe_2GB-19.meta
and this file is madew by putting the meta file in the keygen
Western_and_Central_Europe_2GB-19.meta.dct

when i run the keygen with all safety cameras files and pna file it does say ok to everyfile but it also says that no meta file found....do i have to put a meta file as well or is just a useless warning?

Sorry my mistake, "Western_and_Central_Europe_2GB-19.meta" you need this one, i got confused with file extensions.

So basically you need:
Western_and_Central_Europe_2GB.pna
Western_and_Central_Europe_2GB-19.meta.

Sorry for the confusion!!!

[msubedar]

@ BuMobile @ - Hi BuMobiles, is there a way I can or you can edit post # 1615 and change step 3 where it says "Western_and_Central_Europe_2GB-19.dct" to "Western_and_Central_Europe_2GB-19.meta". My confusion!!!#

Thanks, Mo.

[msubedar]

Disregard. I has thinking of something else..

Looks like we're all getting a bit confused today lol, ;).

[cpu2007]

Sorry my mistake, "Western_and_Central_Europe_2GB-19.meta" you need this one, i got confused with file extensions.

So basically you need:
Western_and_Central_Europe_2GB.pna
Western_and_Central_Europe_2GB-19.meta.

Sorry for the confusion!!!

No problem mate, i was wondering but then I though you know it better then me so It should be true. By the way I have done is as you said. Is it there anyway to check if the safewty cameras are installed correctly withouth driving. I know there is a safety camera near my home but by going on search poi it does not give me any string to search for safety cameras or autovelox

[msubedar]

No problem mate, i was wondering but then I though you know it better then me so It should be true. By the way I have done is as you said. Is it there anyway to check if the safewty cameras are installed correctly withouth driving. I know there is a safety camera near my home but by going on search poi it does not give me any string to search for safety cameras or autovelox

A way of checking is, the camera near your home, create a route that goes past the speed camera and watch a Demo of the route, (You can find this option under "Route Summary") I'd play it at the highest speed, and you should see an icon when you get close to the speed camera, but create a route that is on the correct side of the road depending on which side the camera is just to be safe.

Hope this help.

Mo.

[cpu2007]

Oright mate, I will try this , I just want to thank you again. the way you explained me was very clear and thanks also for providing me all this support.

[msubedar]

Oright mate, I will try this , I just want to thank you again. the way you explained me was very clear and thanks also for providing me all this support.

Anytime mate, hope it all works. Mo.

[rytenuff]

You can't simply copy the files into your tomtom, you have to patch the camera files so they can be recognized on your specific tomtom.

1) Download easytools keygen which can be found on page 1 of this thread if you have not already got it.
2) Then copy over all the camera files into the folder called "insert_meta_from_Map_here".
3) From your map folder copy over 2 files which will be called something like "Western_and_Central_Europe.pna" & "Western_and_Central_Europe-19.dct" (MAKE SURE IT IS NOT THE .meta.dct FILE!!!).
4) You will find a Notepad file called "DeviceID", in there enter your full Device ID all upper-case and with no spaces.
5) Then run the command program called "RunMeforDCT" and follow the options - (It will normally be option #1 then option #1 again but just re-check depending on which Navcore you have).
6) After that is done, from the "insert_meta_from_Map_here" folder, copy over all the camera files, NOT ANY OF YOUR MAP FILES!!!
7) Paste them into your map folder and your done!

Mo.


You don't need the PNA or META from a map.
What you do need is
EasyUseTools
The two files VER and Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID

Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

[addadutta]

I noticed the user was in India. I have no idea of the cost of these cards there and I didn't want to cheerfully suggest that he spends even more money on something which maybe costs too much for him to afford over there.
The system.file i.e. bootloader determines if the device will accept an SDHC card, which is why I asked which bootloader he had installed.

I have put bootloader 5.5022 in the root directory. Is this the correct one?

Also can upgrade navcore to 8.2 or 8.3 navcore edition in tomtom one xls?
As per Tomtom website, latest version for one XLS is
"
Version 8.010
(TomTom GO 530/730/930, GO 520/720/920, ONE 30-Series, XL 30-Series, ONE XL, ONE 3rd edition only)
"
Also if I need to reupload bootloader, what will be the process - format SD card, use clearflush toll, then put the navcore packs? DO I need to format internal disk also and follow the same process or doing the SD card will be sufficient?

Please advice?

Thanks in advance.

[BuMobiles]

@ BuMobile @ - Hi BuMobiles, is there a way I can or you can edit post # 1615 and change step 3 where it says "Western_and_Central_Europe_2GB-19.dct" to "Western_and_Central_Europe_2GB-19.meta". My confusion!!!#

Thanks, Mo.

All sorted for you Mo

[rytenuff]

@addadutta
If all you want to do is use SDHC cards then the 5.5022 bootloader will let you do that. If the file is called system5.5022 at present then you only need to rename it to system. Put it in root and boot up your xls. Make sure that the xls is fully charged as you must make sure that the first boot up is not interupted. The file will be written into the hardware and will be permanent until you change it for a higher numbered system file. i. e. you cannot go back to a lower number only up.
Changing your bootloader will not make your troublesome 4GB SD card suddenly work but it will allow you to use the more easily obtained SDHC cards.
You don't need to change your Navcore unless you want to.

[kochane]

Hi all,

I am new to this forum and not quite computer savvy so help someone might be able to help me.

I have recently got a TomTom XL 300 (I think) with the version 8.014 installed and UK maps.

I am going to USA for a week soon and my friend gave me a copy of a downloaded map from TPB called USA_and_Canada v.7.25.1905. I have had a read through here and downloaded EasyUseTools to try and install. However, I just get a frozen load screen and nothing happens?

Can anyone advise what I am doing wrong?

These are the steps I have taken

1. As my TomTom has limited memory I deleted the UK maps folder and copied this USA_and_Canada v.7.25.1905 folder into the TomTom device folder.

2. I copy the ttsystem from ttsystem_pro_8300 folder into my device root folder (note although it says to do this for version 8.3 and above if I just copy my existing ttsystem into the patcher and click RunMe - it says it can't find it and that it is already patched or an old version.

3. I copy the meta and pna files from the USA maps on my device into the insert_meta_from_Map_here and click Execute RunMeforAllAutomatic which does create the new .dct file onto my device

4. I then turn off the TomTom and remove from PC

When I turn it on it just stalls at the loading screen.

Any ideas as to what is wrong?

[rytenuff]

You cannot just throw any old ttsystem in your device and expect it to work.
You cannot patch your Navcore. The patching part of the EasyUseTools was for older Navcores not the later ones. You need an already cracked/patched Navcore.
Here is a link to it here.
http://www.2shared.com/file/4640119/9d7bbd3b/81014dlc.html
It is a DLC file so you will need to download and install Cryptload from here: http://cryptload.info/download/

Once downloaded, copy the ttsystem, the PNDNavigator and data.chk files into root. (Not inside any folder.) Allow them to overwrite files.
Run the EasyUseTools again using option 1 to patch the map. The downloaded files are already cracked/patched.

[gadgetathome]

HI All,

Here you go the latest Safety Camera direct from Tomtom.

Just use the keygen and away you go.

Safe driving........:)

Gadget

[kochane]

You cannot just throw any old ttsystem in your device and expect it to work.
You cannot patch your Navcore. The patching part of the EasyUseTools was for older Navcores not the later ones. You need an already cracked/patched Navcore.
Here is a link to it here.
http://www.2shared.com/file/4640119/9d7bbd3b/81014dlc.html
It is a DLC file so you will need to download and install Cryptload from here: http://cryptload.info/download/

Once downloaded, copy the ttsystem, the PNDNavigator and data.chk files into root. (Not inside any folder.) Allow them to overwrite files.
Run the EasyUseTools again using option 1 to patch the map. The downloaded files are already cracked/patched.

Thank you I will give this a go

[aidso2005]

Ive killed my tomtom ONE XL. I copied the map onto the device and ran run RunMeforAllAutomatic came up with everything on. it only give me the option of is this correct press eneter if it is correct on N. I pressed enter and it said everything ok press any keyy to continue. rebooted my one XL and it says map annont be used? any ideas?

[msubedar]

Ive killed my tomtom ONE XL. I copied the map onto the device and ran run RunMeforAllAutomatic came up with everything on. it only give me the option of is this correct press eneter if it is correct on N. I pressed enter and it said everything ok press any keyy to continue. rebooted my one XL and it says map annont be used? any ideas?

Hey, it's quite hard to understand what you have done, can you describe the problem any better?

Mo.

PS. Can we have some more details like which Navcore (firmware) do you have and which Map(s)?

[BuMobiles]

Ive killed my tomtom ONE XL. I copied the map onto the device and ran run RunMeforAllAutomatic came up with everything on. it only give me the option of is this correct press eneter if it is correct on N. I pressed enter and it said everything ok press any keyy to continue. rebooted my one XL and it says map annont be used? any ideas?

don't run the RunMeforAllAutomatic.cmd

run RunMeforDCT.cmd then follow the options, now run the RunMeforMETA.cmd and follow the options.

p.s. make sure your ttsystem or already patched if v8 firmware (if not use the ttsysten patcher on v7 firmware) :D

[psu1]

Hello again all,

After going back several days in this thread, I see that I did post information that was pretty well addressed earlier. Mea Culpa! New poster. What can you do?

Well, I have a few questions on small items. After moving "up" 'down" from 8.300 to 8.204 I noticed a few small changes. Obviously the big positive changes were the addition of the many many voice commands and the much nicer GUI. ALG seems to be present when I do some sample trips to larger cities. *Not sure about IQ routes though. There are IQ routing questions in the preferences though. Every day I put in navigate to my work site. I know what is the fastest route. I never follow TTs route and do my own. In theory should the original TT route change after on-going alternative route being used? No biggie, just asking.

Orginally, I lost my shutdown image. Initially no luck in getting it back. But after adding both a startup sound and shutdown sound, a shutdown image did reappear, but it happened to be the same as my startup image (Nittany Lion BTW). Seeing that image twice is not an issue. Just trying to understand how these changes occur and how they should work.

The biggest "little" thing is that I could never get the desired arrival sound to work. And this has been with several Navcores and different maps. No matter what I do I always end up with "You have reached your destination" I use a computer voice so I could keep the street names. Any ideas how to get a different arrival sound to work?

Also, whenever I check the Navcore I get 2 different answers. The TT reports that I am using 8.204 and the new features obviously support this. However, when I use "Home" and go to "Show items on my Device" it identifies that the Application is still 8.300. *Can this cause future problems if I attempt to download future upgrades?

One last question. I downloaded the SpeedCam RAR just posted previously in this thread. What maps are they for? Also how do I use the Keygen to make them work?

Sorry if these questions are both minor and possibly confusing, but I'm trying to get some idea how to better understand these devices. All my prior experiences with computers and their applications have been Macintosh based. Thanks in advance for your advice and feedback.

PSU

[rytenuff]

"One last question. I downloaded the SpeedCam RAR just posted previously in this thread"
As before, it is customary to click on Thanks for posts you found helpful.
By your own admission you have found and used the info contained in this thread.
You must have found more than one post helpful?

[rytenuff]

I have never come across any other arrival sound bar, "You have reached your destination." I didn't know there were alternatives. Could you point to one?
In Planning preferences try selecting Always plan shortest routes. See what TT suggests.
Name the shutdown image as, suspend. Name the shutdown sound as, suspend. i.e. link the two.
You probably have a bak file in root which has details for 8.300.
Speedcams are not specific to maps if you have the correct meta.txt codes for them.
Installation is covered only a few posts back from this. I would have thought you would have come across this, "After going back several days in this thread"?

[rytenuff]

http://create.tomtom.com/manuals/create-your-own-content/

[rytenuff]

Re above post.
"I have never come across any other arrival sound bar, "You have reached your destination." I didn't know there were alternatives. Could you point to one?"
You need to be using recorded voice not computer voice.

[tendriver]

Ive killed my tomtom ONE XL. I copied the map onto the device and ran run RunMeforAllAutomatic came up with everything on. it only give me the option of is this correct press eneter if it is correct on N. I pressed enter and it said everything ok press any keyy to continue. rebooted my one XL and it says map annont be used? any ideas?

You have not killed your ONE XL. If you will take time to read the last 2 or 3 pages of this thread, you will see your answer.

[tendriver]

Speedcams are not specific to maps if you have the correct meta.txt codes for them.
Installation is covered only a few posts back from this. I would have thought you would have come across this, "After going back several days in this thread"?[/quote]

I'm sure you meant to say that Speedcams are not specific to map versions. I doubt Speedcams while function on, say, a North America map.

[rytenuff]

No I meant they are not specific to maps. Obviously they will not show if you are not on roads where they are but they will be activated nevertheless.
If you have a map for only Switzerland or only GB and RoI or only Germany or only France or only Netherlands the radars or Kamerat or Autovelox or FartKameras or Safety cameras will be activated ready to show if you are on the road where they are placed.

[rytenuff]

Just checked, Switzerland is not included in the meta.txt Oops!
Only! Spain, Finland, France, Italy, Netherlands, Norway, Sweden, Austria, Germany, Belgium, Poland, Portugal, UK, Czech Republic, South Africa, and Australia .
(CH is Switzerland not CZ)

[wannscan]

[quote=psu1;
The biggest "little" thing is that I could never get the desired arrival sound to work. And this has been with several Navcores and different maps. No matter what I do I always end up with "You have reached your destination" I use a computer voice so I could keep the street names. Any ideas how to get a different arrival sound to work?


Although ive not tried this myself it does read as pretty straight forward.
If you connect your tomtom to pc, then open tt,home and use the icons,

1# add maps, traffic
voices ect.

2# sounds

3# arrival sounds

You should see the message below..


bored with hearing "you have reached your destination" change it hear.

Hope this helps.:)

[rytenuff]

[quote=psu1;
The biggest "little" thing is that I could never get the desired arrival sound to work. And this has been with several Navcores and different maps. No matter what I do I always end up with "You have reached your destination", I use a computer voice so I could keep the street names. Any ideas how to get a different arrival sound to work?


Although ive not tried this myself it does read as pretty straight forward.
If you connect your tomtom to pc, then open tt,home and use the icons,

1# add maps, traffic
voices ect.

2# sounds

3# arrival sounds

You should see the message below..


bored with hearing "you have reached your destination" change it hear.

Hope this helps.:)

It only works with recorded voices not computer text-to-speech voices.

[aidso2005]

Ok I have Firmware version 8.010 and i tried to load map united kingdom and ireland V815.2024. I copied the new map to the device and removed the old one as there was no space. When i boot me tomtom it shows the splash screen then a screen saying "problem with map" "you cannot use this map on this device" I think i need a patched system but i cant find one anywhere. I have ran the keygens and they are fine i tried what was said earlier about running the V7 patcher but that doesnt work. any help would be great.

[joseph64]

Hi to All,
I have a simple question and is is basically addressed to the people who have done a lot of testing.
I have tried several Navcores and the one actually on my GO 910 is 8.300.xxxx.
I have installed on TT units from friends Navcore 8.204.xxxx.
I would like to know, wich one it the most actual one as the icons on 8.204 look more 'up to date'.:D
Thanks, joseph64

[tendriver]

Hi to All,
I have a simple question and is is basically addressed to the people who have done a lot of testing.
I have tried several Navcores and the one actually on my GO 910 is 8.300.xxxx.
I have installed on TT units from friends Navcore 8.204.xxxx.
I would like to know, wich one it the most actual one as the icons on 8.204 look more 'up to date'.:D
Thanks, joseph64

While 8.300 is the current Navcore for your 910, 8.204, which is for the new X40 GOs, is newer and has more features than 8.300. It will function quite well on your device.

[msubedar]

Ok I have Firmware version 8.010 and i tried to load map united kingdom and ireland V815.2024. I copied the new map to the device and removed the old one as there was no space. When i boot me tomtom it shows the splash screen then a screen saying "problem with map" "you cannot use this map on this device" I think i need a patched system but i cant find one anywhere. I have ran the keygens and they are fine i tried what was said earlier about running the V7 patcher but that doesnt work. any help would be great.

Here you go, I have just uploaded a NC V8.010 patched ttsystem file for you.

Link: http://www.2shared.com/file/4646425/9c403fe4/ttsystem.html

Mo.

[psu1]

"One last question. I downloaded the SpeedCam RAR just posted previously in this thread"
As before, it is customary to click on Thanks for posts you found helpful.
By your own admission you have found and used the info contained in this thread.
You must have found more than one post helpful?
I've seen a few posts referring that I should know some things because I stated that I went back and looked some of the prior posts in this thread. What I was referring to is YES, there were posts explaining the use of 8.204 to get some 740 feature prior to my 1st post. Guess what? I never saw them prior to my 1st post.. I thought 8.300 was my only option. I DID NOT "discover" that information on this site and obviously this thread. I came across the information accidently on that fatwallet site. As stated previously, I didn't know the 740 even existed. So when I came across it, I tried it and it worked. I thought I was doing a GOOD thing when I posted it here.

Obviously, some seem annoyed by my perceived lack of appreciation or knowledge about this stuff. I'll try to make it clear. I understand very little about how these GPS devices work. I've only used Macs so obviously the EasyTools stuff is just as confusing. Obviously I appreciate the help. I am now aware that providing thanks for a helpful explanation is the norm. It makes sense.

I had a question about the SpeedCams. Yes, I read that they were available. Yes, I downloaded them to see if I could figure them out. No, I could figure them out. The directions provided were to use EasyTools. Although I am a Mac person, I did try to use EasyTools through Virtual PC. I had no luck. So, I asked for additional advice to improve my "skills" with EasyTools. Again. I see the message that I should know some of this stuff because I admitted that I did read backwards in the thread.

Of course I read older topics in the thread. I hoped to solve some of these questions on my own as some responses to my questions have come across as semi-sarcastic or patronizing. I hope I am wrong. I always try to do it on my own after getting enough information from this and other sites.

Regarding the shutdown message, I have tried several times to replace the arrival message. I've gone through Home where those changes are made. Actually downloaded a few choices. Home states they are chosen. They never work. Rytenuff states I should use recorded. Thank you! That is advice I could understand and say thank you for. Of course that raises another question.

I want the computer voice to get street names. Can I use both a recorded and computer voice at the same time. Again, I need to identify that all of this stuff is new to new so some of the questions may seem "stooopid". I'm getting to the point I'm not sure what is a helpful post and what is not. So, obviously the thanks button might be erratic.

PSU

Again, thanks in advance for this rambling and your continued guidance.

[psu1]

[rytenuff;4057862]I have never come across any other arrival sound bar, "You have reached your destination." I didn't know there were alternatives. Could you point to one?

rytenuff - If you go through "Home" and adding items, there is a component *where you can change the arrival sound. I do exactly as described but no luck.


In Planning preferences try selecting Always plan shortest routes. See what TT suggests. I have this selected.


Name the shutdown image as, suspend. Name the shutdown sound as, suspend. i.e. link the two. Thank you! The previous Navcores named the shutdown image as antitheft something or other and it worked! *I wonder if 8.204 is totally different.


You probably have a bak file in root which has details for 8.300. I guessed there was a problem with one of the files remaining. * *Any idea of what file might be the problem? Could this be an issue down the road?


Speedcams are not specific to maps if you have the correct meta.txt codes for them.

Installation is covered only a few posts back from this. I would have thought you would have come across this, "After going back several days in this thread"?

Sorry, never did see the installation process. If I did, I probably would have tried it. Not sure if it would have been successful. Again, Windows jargon confuses me. Still hoping to get better with it.

[msubedar]

@ psu1 @ Link on how to install Speedcams if it helps: http://forum.gsmhosting.com/vbb/showpost.php?p=4054604&postcount=1615

[psu1]

Slowly getting there. After posting I tried a few more things. In voice prefs. I selected use recorded voice. I now have the arrival sound I wanted. I still have the street names spoken by the computer voice. I also changed the name of the shutdown image to "suspendw.bmp". That now works. Thanks for the advice RY.

The last hurdle is to try to get the Home app. to recognize that I am running 8.204 and not 8.300. Even when I tell Home to copy the Application to the computer, it again identifies it as 8.300. Suggestions most appreciated!

PSU

[msubedar]

Slowly getting there. After posting I tried a few more things. In voice prefs. I selected use recorded voice. I now have the arrival sound I wanted. I still have the street names spoken by the computer voice. I also changed the name of the shutdown image to "suspendw.bmp". That now works. Thanks for the advice RY.

The last hurdle is to try to get the Home app. to recognize that I am running 8.204 and not 8.300. Even when I tell Home to copy the Application to the computer, it again identifies it as 8.300. Suggestions most appreciated!

PSU

Have you put in the .dll file into the Home directory?

Look at this post, may help: http://forum.gsmhosting.com/vbb/showpost.php?p=4015179&postcount=1235

[rytenuff]

Firstly, a helpful post is one that provides you with information you did not know previously and which you think you may make use of sometime.

Look in root of your TT. Look for ttgo files. You may have ttgo.bif, ttgo.bak and ttgo.ori.
If you have, the ttgo.ori file will have the 8.204 details. Change the ttgo.bif details to be like the ttgo.ori file. Make a folder in root called store and put the bak and ori files in there so they won't be found by your device. If this next doesn't work you can copy them back into root again.

Next download this:
http://rapidshare.com/files/164940398/Navcore.8.204.9718_tomtom.com.rar
unRAR unzip or whatever you do with a MAC and place the entire fiolder here:
Mac Users:-
User's_Home/Library/ApplicationSupport/TomTomHOME/Profiles/????????.default/Resources/Extensions/Navcore.?.???.????.mac@tomtom.com/?-???- ????-/.framework

Do a hard reset with a pin and boot up your TomTom. Connect to Home and see what gives.

[rytenuff]

@ psu1 @ Link on how to install Speedcams if it helps: http://forum.gsmhosting.com/vbb/showpost.php?p=4054604&postcount=1615


As I said previously, you do not require a map PNA or META to activate SpeedCams. The Cams will work in any map for the countries covered by the SpeedCams. You do require the meta.txt code for the cams to activate them.

[rytenuff]

BTW you can read the contents of the bif, bak ori files with a text editor. In Windows, Notepad does the job.

[psu1]

msubedar,

Thanks for the suggestions. When I downloaded all of the files I did put this piece "Navcore.8.204.9718@tomtom.com" in the correct place for the Mac. It included the dll file in there already. I did notice that there was another download that only included the dll file. I replace the one that was already in the folder with the other and see what happens.

Also, and this may be silly, but in regard to the SpeedCam files, which are the only ones I need for North America?

I did look at your recommended link, and it does seem clearer. Once I know which are the North America files, I'll attempt it. Thanks again!!

PSU

[rytenuff]

The following is the latest (13th Jan 09) meta coded for Cameras:


; Autovelox_IT_TomTom
20 23 A0 51 07 F9 6F FA 07 35 CF BB 03 A2 59 76 Autovelox_IT_TomTom.ov2
; Blitzer_AT_TomTom
3C 6B 7C B4 74 60 1E 85 65 6D CA 10 81 A6 85 EB Blitzer_AT_TomTom.ov2
; Blitzer_CZ_TomTom
E0 9C BB 1F 0A B1 8F E1 D1 3D A2 97 D0 77 BC 72 Blitzer_CZ_TomTom.ov2
; Blitzer_DE_TomTom
50 D2 AA 5A E9 95 66 14 F2 9D 41 C2 1B 28 AA 65 Blitzer_DE_TomTom.ov2
; Fartkamera_SE_TomTom
36 AE 4F 79 0A 4F 98 27 9B 6E B0 C2 14 76 43 EA Fartkamera_SE_TomTom.ov2
; Fartsboks_NO_TomTom
32 DE 94 B5 A2 C5 65 08 04 0E E9 27 94 44 01 0E Fartsboks_NO_TomTom.ov2
; Flitspaal_NL_TomTom
07 26 5E F7 1D A7 A5 AB 99 72 AE AB C7 20 B2 05 Flitspaal_NL_TomTom.ov2
; Kamerat_FI_TomTom
86 09 AC 96 64 CD 6B D1 E0 E8 B4 49 D6 5F 12 0F Kamerat_FI_TomTom.ov2
; Radar_BE_TomTom
4B DB D9 E3 B6 76 84 D9 A3 D3 E7 47 41 62 E9 DF Radar_BE_TomTom.ov2
; Radar_ES_TomTom
05 1D 83 BC A1 99 B0 6F C7 C6 18 78 1E CC 52 91 Radar_ES_TomTom.ov2
; Radar_FR_TomTom
23 70 04 97 96 B8 F1 8E C6 57 E8 52 D7 D5 63 92 Radar_FR_TomTom.ov2
; Radar_PT_TomTom
E8 1A 0D 64 F1 51 E0 09 6A 95 98 64 C4 49 4B E8 Radar_PT_TomTom.ov2
; Safety_Cam_PL_TomTom
74 50 AA F5 2A 08 E7 FF 3B BF 09 0D 23 C0 34 3F Safety_Cam_PL_TomTom.ov2
; Safety_Cam_UK_TomTom
93 67 0F 86 A8 B2 0E 69 14 52 A4 13 FE 61 6F 71 Safety_Cam_UK_TomTom.ov2
; Safety_Cam_UK_Premium
E4 FE 0E 56 C9 74 91 BA EB DA 42 C4 B2 C7 D8 01 Safety_Cam_UK_Premium.ov2
; Safety_Cam_AU_TomTom
F0 4D 3D 25 F8 A5 EE 78 8D 96 B2 B0 A5 1D E7 59 Safety_Cam_AU_TomTom.ov2
; Safety_Camera_Australia
9A 6A 56 4C 63 03 28 B8 98 27 E4 47 55 33 8C 22 Safety_Camera_Australia.ov2
; Safety_Cam_100_Australia
EF 89 AE C3 E5 4B 16 3C 52 B3 0E E3 D9 3F 22 84 Safety_Cam_100_Australia.ov2
; Safety_Cam_60_Australia
A7 E4 A8 39 6A F4 9E FC 2C 16 9D 0A 72 0B 69 B9 Safety_Cam_60_Australia.ov2
; Safety_Cam_70_Australia
3C 71 24 7B F1 5E C3 CD C0 70 A3 E1 BB 2A 3F 5E Safety_Cam_70_Australia.ov2
; Safety_Cam_80_Australia
62 2C 85 4F E1 5F CF 63 F0 69 1B AF B2 6A D5 49 Safety_Cam_80_Australia.ov2
; Safety_Cam_90_Australia
D2 43 3E CD FD 4F 13 57 C5 5F FF B3 49 EC 75 85 Safety_Cam_90_Australia.ov2
; Safety_Cam_Other_Australia
0C DB 0E 4B 4B 11 AD 8D D0 9E 73 C8 42 A0 F1 57 Safety_Cam_Other_Australia.ov2
; Safety_Cam_ZA_TomTom
F1 F2 06 E3 FB 83 D8 02 42 07 3F 7D DD B2 95 4A Safety_Cam_ZA_TomTom.ov2

[rytenuff]

If you had said you were in North America it would have saved you some grief. TT don't do SpeedCams for America!

[msubedar]

msubedar,

Thanks for the suggestions. When I downloaded all of the files I did put this piece "Navcore.8.204.9718@tomtom.com" in the correct place for the Mac. It included the dll file in there already. I did notice that there was another download that only included the dll file. I replace the one that was already in the folder with the other and see what happens.

Also, and this may be silly, but in regard to the SpeedCam files, which are the only ones I need for North America?

I did look at your recommended link, and it does seem clearer. Once I know which are the North America files, I'll attempt it. Thanks again!!

PSU

As Rytenuff just mentioned above, TT do not do Speed Cams for America.

http://www.tomtom.com/plus/service.php?ID=8&SID=4&l=4

Sorry.

[tendriver]

If you had said you were in North America it would have saved you some grief. TT don't do SpeedCams for America!

As Rytenuff just mentioned above, TT do not do Speed Cams for America.

http://www.tomtom.com/plus/service.php?ID=8&SID=4&l=4

Sorry.

IF he had read post 1644, he would have known that. :eek:

[msubedar]

IF he had read post 1644, he would have known that. :eek:

lol, go easy on the poor guy.

(Love the little animated face at the end, very funny)

[psu1]

RY and MSU

Thanks for your clear responses. I now know that Speed Cam will NOT work for NA. I was hopeful. See, as I read TD's post, his response left some hope.

TD's post 1644 was not real clear. As he writes "I doubt Speedcams while function on, say, a North America map."

I also DOUBT that his response was clear enough to shut the door on NA map. AH! I learn more each day.

[msubedar]

RY and MSU

Thanks for your clear responses. I now know that Speed Cam will NOT work for NA. I was hopeful. See, as I read TD's post, his response left some hope.

TD's post 1644 was not real clear. As he writes "I doubt Speedcams while function on, say, a North America map."

I also DOUBT that his response was clear enough to shut the door on NA map. AH! I learn more each day.

Like One famously quoted "Every new day is a new learning curve"!!! :)

[rytenuff]

SCDB Speedcams courtesy of The Maverick.

For info look here: http://www.scdb.info/en/plugin-tomtom-go/
For installation info: http://www.scdb.info/en/installation-tomtom-go/
Database is here: http://www.2shared.com/file/4651288/bc24c668/SCDB.html

[rytenuff]

NEW VERSION yDGpatch v1.2

I just downloaded official Navcore 8.300 from here:
http://download.tomtom.com/sweet/navcore/navcore_8.300.9732.go530-go730-go930.cab
So that I could try out the yDGpatch v1.2 prog .
This will patch official ttsystem files so that your device will be able to use pirate maps. It doesn't give you extra bells and whistles that your device isn't meant to have it just lets you use the current official Navcore for your device.

It requires you to have Net framework 2.00 minimum installed to work.
Version 3.5 is available from Microsoft here:
http://www.microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en

The official Navcore for the 720 is 8.300 so that is why I chose that.
I installed it to an SD card and ran the yDGpatcher. Operation is a doddle.You click "Patch File" show it the path to the ttsystem file, select it and click, "Go !!" Several seconds later you get the message that it has patched the file.
I then patched the map with EasyUseTools and it worked perfectly. No extra bells or whistles just the Navcore working as it is supposed to.
If you have a spare SD card give it a try.

Get it here (includes "ReadThis" file)

http://www.2shared.com/file/4651528/43843867/yDGpatch_1-2-16-2.html

[gadgetathome]

SCDB Speedcams courtesy of The Maverick.

For info look here: http://www.scdb.info/en/plugin-tomtom-go/
For installation info: http://www.scdb.info/en/installation-tomtom-go/
Database is here: http://www.2shared.com/file/4651288/bc24c668/SCDB.html


Hi Rytenuff,

Are these better than the one I get dirrect from tomtom?

Gadget

[psu1]

Look in root of your TT. Look for ttgo files. You may have ttgo.bif, ttgo.bak and ttgo.ori.
If you have, the ttgo.ori file will have the 8.204 details. Change the ttgo.bif details to be like the ttgo.ori file. Make a folder in root called store and put the bak and ori files in there so they won't be found by your device. If this next doesn't work you can copy them back into root again.


Rytenuff, The only file you identify on the TT is the ttgo.bif. Not sure why the files are not there or even what they do.


Next download this:

http://rapidshare.com/files/164940398/Navcore.8.204.9718_tomtom.com.rar
unRAR unzip or whatever you do with a MAC and place the entire fiolder here:

I tried this 2 times. No change in Home identifying the Application as 8.300. Minor, but something I would like to change. *Thanks again!


PSU

[psu1]

The official Navcore for the 720 is 8.300 so that is why I chose that.
I installed it to an SD card and ran the yDGpatcher. Operation is a doddle.You click "Patch File" show it the path to the ttsystem file, select it and click, "Go !!" Several seconds later you get the message that it has patched the file.
I then patched the map with EasyUseTools and it worked perfectly. No extra bells or whistles just the Navcore working as it is supposed to.
If you have a spare SD card give it a try.



Ryetnuff,

Are you running 2 applications? One on TT and one on card.

If not, can you tell me why you went back to 8.300, when it appears that 8.204 has more bells and whistles? *Thanks again!

PSU

[tendriver]

The official Navcore for the 720 is 8.300 so that is why I chose that.
I installed it to an SD card and ran the yDGpatcher. Operation is a doddle.You click "Patch File" show it the path to the ttsystem file, select it and click, "Go !!" Several seconds later you get the message that it has patched the file.
I then patched the map with EasyUseTools and it worked perfectly. No extra bells or whistles just the Navcore working as it is supposed to.
If you have a spare SD card give it a try.



Ryetnuff,

Are you running 2 applications? One on TT and one on card.

If not, can you tell me why you went back to 8.300, when it appears that 8.204 has more bells and whistles? *Thanks again!

PSU

He just did it as a TEST of the new version of the yDGpatcher software!!!

[tendriver]

I tried this 2 times. No change in Home identifying the Application as 8.300. Minor, but something I would like to change. *Thanks again!


PSU

Where in TTHOME are you looking for it to identify the Application as 8.300?

[psu1]

He just did it as a TEST of the new version of the yDGpatcher software!!!

TenDriver


I actually tried the earlier version and couldn't even get it to open up when running Virtual PC. *Strange, because it opened up everything in the Windows platform.

PSU

[psu1]

Where in TTHOME are you looking for it to identify the Application as 8.300?

TT device actually states the Navcore version is 8.204.


But when I use Home, and go to show items on the TT, the application shows as 8.300. Even when I copied the application from the TT back to the computer it still identifies the application as 8.300.

Not sure if this is a problem or not. I'm just concerned that there might be an issue if there is an update for 8.204 but Home "thinks" the app. is 8.300.

Thanks again for the advice.

PSU

[tendriver]

TT device actually states the Navcore version is 8.204.


But when I use Home, and go to show items on the TT, the application shows as 8.300. Even when I copied the application from the TT back to the computer it still identifies the application as 8.300.

Not sure if this is a problem or not. I'm just concerned that there might be an issue if there is an update for 8.204 but Home "thinks" the app. is 8.300.

Thanks again for the advice.

PSU

If you are going to "Show contents of my GO", + button by Applications, More info, it will read "Version 8.300" as it should with a patched application installed. NOT a problem!!!!!!!!!!!!!!

[psu1]

If you are going to "Show contents of my GO", + button by Applications, More info, it will read "Version 8.300" as it should with a patched application installed. NOT a problem!!!!!!!!!!!!!!

Duh!!


All is good then!!!

BUT I just got my 8G SDHC card, so now I will start "playing" with that.

I do have another question. If there are updates to 8.204, will Home get them?

Thanks!!
PSU

[tendriver]

Duh!!


All is good then!!!

BUT I just got my 8G SDHC card, so now I will start "playing" with that.

I do have another question. If there are updates to 8.204, will Home get them?

Thanks!!
PSU

Usually, there is a new Navcore instead of an update.

[rytenuff]

Hi Rytenuff,

Are these better than the one I get dirrect from tomtom?

Gadget

I doubt it. They were there, so I just posted them in case they were of use, especially to our European friends.

[rytenuff]

Fixed TT Radars (Cameras) and Meta.txt 15th Jan '09

http://www.2shared.com/file/4656397/a995b836/Radars_andMeta15thJan.html

These Cameras will work for any map covering these countries.
Spain, Finland, France, Italy, Netherlands, Norway, Sweden, Austria, Germany, Belgium, Poland, Portugal, UK, Czech Republic, South Africa, and Australia .

To install:
You don't need the PNA or META from a map.
What you do need is
EasyUseTools
The two files VER and Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID

Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

Courtesy The Maverick

[joseph64]

The changelog gives you an idea of what is new. Maybe it would be an idea to post that here?
I have just got a 720 and things work smoothly with that but I am trying not to forget about all the hoops you need to jump through in order to get the more basic devices to use Navs (like 8.204) they were never designed to use.
Lots of people on here use these so I will try to remember that when posting.
i.e. (ONES )Outsourced folder so there is enough RAM to work. Change to small keyboard, use qwerty not ABCDE to enable navigate by postcode and map co-ordinates. Change the ttsserver in order to use VocalizerTTS, etc.
Hi rytenuff,
What do you mean when you mention "Change the ttsserver in order to use VocalizerTTS, etc.".
All these bits and bobs in the Navcore are still a bit of mumbo jumbo to me.
Thanks, Joseph64.

[joseph64]

I have a Transcend 4GB SD card ( not 4GB SDHC card)for tomtom one xls.
Navcore 8.010 with SE TTsystem 8.010

When the map is loaded (both cracked or original) This is not working and screen is getting hung-up. So I have to reset after removing the card.

But when I am using any 2 GB SD card or not using any card in SD card slot, tomtom is working fine with cracked or original maps.

The card is working fine in my laptop. So I donot think that the card is faulty.

For last 2 days I have done everything possible- using Clearflash tool, reformatting card and tomtom multiple times, using original navcore version etc, but totally fruitlesss.

Please note I have checked the treads in htis forum and ipmart-forum, but caanot resolve the issue till now.

DO anyone faced this and can you guide me on how to overcome this issue?

Many thanks in advance

Hi, I had the same problem with a GO of a friend of mine.
The solution was to load a new bootloader.
I used ver.5.5022 and after that, all workd A-OK.
Cheers, Joseph64.

[tendriver]

Hi rytenuff,
What do you mean when you mention "Change the ttsserver in order to use VocalizerTTS, etc.".
All these bits and bobs in the Navcore are still a bit of mumbo jumbo to me.
Thanks, Joseph64.

If you have a LoquendoTTS folder in your TT root & voices are working for you, then you don't need to trouble yourself with this.

[rytenuff]

@ joseph64
There are two flavours of TTS (Text To Speech) for TomTom, Loquendo which is by far the better of the two and VocalizerTTS which is not so good at pronouncing words but does work in some devices that can't use Loquendo. e.g. ONE's using 8.204
Unfortunately, VocalizerTTS is only available in three languages. American English M(ale) and F(emale) , French Canadian M and F, and Mexican Spanish M and F. It was primarily aimed at the North American market.
To use it with a ONE and 8.204 you need to use a different (older) ttsserver in Outsourced folder. SE Nav8.204 version 1.4 already includes this and the original in a separate folder should you want to use it instead.
As Tendriver says, if you have Loquendo working it is not worth installing VocalizerTTS

[joseph64]

@Rytenuff & Tendriver, and all posters,
When I read all these post from you guy's I sometimes wonder if you still have some time left over for other things like sleeping or so.
I appreciate a lot all your effort in helping us to get more out of a device that otherwise would soon only serve to decorate our dashboard a wee bit.
I can understand that any (Cloggy) company need to sell, in order to survive, but they should no try to become toooooo clever trying to sell a new device every year again to the users. A reasonable upgrade/update for at least 5 years would possibly give you guy's a lot more spare time.
Thanks a bunch anyway!
joseph64. (a cloggy myself! Perhaps that is why I can understand part of their politics).:)

[tendriver]

@Rytenuff & Tendriver, and all posters,
When I read all these post from you guy's I sometimes wonder if you still have some time left over for other things like sleeping or so.
I appreciate a lot all your effort in helping us to get more out of a device that otherwise would soon only serve to decorate our dashboard a wee bit.
I can understand that any (Cloggy) company need to sell, in order to survive, but they should no try to become toooooo clever trying to sell a new device every year again to the users. A reasonable upgrade/update for at least 5 years would possibly give you guy's a lot more spare time.
Thanks a bunch anyway!
joseph64. (a cloggy myself! Perhaps that is why I can understand part of their politics).:)

De nada. Feliz Año Nuevo.

[moxon]

does this map exist?

Turkey, Western and Central Europe 815.2032

Thanks

[msubedar]

does this map exist?

Turkey, Western and Central Europe 815.2032

Thanks

Hey There, A turkey map does exist Version: 815.2033 (http://www.gpsunderground.com/forums/redirector.php?url=http%3A%2F%2Flink-protector.com%2F672590%2F) & in regards to the Western and Central Europe Map Version 815.2032, there is no such map version. There are Versions "Western and Central Europe 815.2023" & "Western_and_Central_Europe_2GB 815.2034" but nothing in the middle of them like 815.2032, ofcourse there are a few more versions too of this map.

Mo.

PS. + There is no map that combines Turkey with Western and Central Europe.

[msubedar]

De nada. Feliz Año Nuevo.

I had to find out what that meant, lol. For those of you who don't know what that means which included me, it means "You're welcome. Happy New Year" :D

[tendriver]

Hey There, A turkey map does exist Version: 815.2033 (http://www.gpsunderground.com/forums/redirector.php?url=http%3A%2F%2Flink-protector.com%2F672590%2F) & in regards to the Western and Central Europe Map Version 815.2032, there is no such map version. There are Versions "Western and Central Europe 815.2023" & "Western_and_Central_Europe_2GB 815.2034" but nothing in the middle of them like 815.2032, ofcourse there are a few more versions too of this map.

Mo.

PS. + There is no map that combines Turkey with Western and Central Europe.

Au contraire, mon ami!!! There is a Turkey, Western & Central Europe v8.15 map, but I have no idea how many devices it is available for.

http://www.tomtom.com/products/maps/select.php?D=1047&Language=1&P=4794 (http://www.tomtom.com/products/maps/select.php?D=1047&Language=1&P=4794)

[msubedar]

Au contraire, mon ami!!! There is a Turkey, Western & Central Europe v8.15 map, but I have no idea how many devices it is available for.

http://www.tomtom.com/products/maps/select.php?D=1047&Language=1&P=4794 (http://www.tomtom.com/products/maps/select.php?D=1047&Language=1&P=4794)


Oh wow, so there is one, Must be new, unless if i've never noticed it, lol. Thats quite handy!!!!

English, Spanish & now French not bad mate!!! ;)

[moxon]

What map is this ?

TomTom Europe 2GB U 815.2078

;Europe_2GB_U
95 59 0F 9D A3 B5 28 1C CD E7 AE 61 4F 51 73 CE Europe_2GB_U-19.meta

[msubedar]

What map is this ?

TomTom Europe 2GB U 815.2078

;Europe_2GB_U
95 59 0F 9D A3 B5 28 1C CD E7 AE 61 4F 51 73 CE Europe_2GB_U-19.meta

It is a map of Russian Europe.

[tendriver]

What map is this ?

TomTom Europe 2GB U 815.2078

;Europe_2GB_U
95 59 0F 9D A3 B5 28 1C CD E7 AE 61 4F 51 73 CE Europe_2GB_U-19.meta

It's a Russian version map of Europe. A special Russian Navcore Is required for it.

[tendriver]

English, Spanish & now French not bad mate!!! ;)

I've spent a lot of time on your side of the "big pond".

[moxon]

here is the Navcore_8.060.9425

the map above only works with this version . map covers all of Europe ( western , central , east also covers turkey )

http://www.turk-dreamworld.com/redirect-to/?redirect=http%3A%2F%2Frapidshare.com%2Ffiles%2F17 8604413%2FNavcore_8.060.9425_patched_2_.rar

[moxon]

TomTom Europe 2GB U 815.2078

;Europe_2GB_U
95 59 0F 9D A3 B5 28 1C CD E7 AE 61 4F 51 73 CE Europe_2GB_U-19.meta

with this map IQ Routes and Advanced lane guidance are supported..only works with the navcore 8.060.9425.covers ALLLLL Europe !!!!

[moxon]

with navcore 8.060.9425 u can also play instructions through your car speakers via FM transmitter

[moxon]

its designed for tomtom go 730 so it works with go 720 perfectly . best of all u only need one map which covers everywhere !!

Now all need is tomtom home patch for this version !

[tendriver]

here is the Navcore_8.060.9425

the map above only works with this version . map covers all of Europe ( western , central , east also covers turkey )

http://www.turk-dreamworld.com/redirect-to/?redirect=http%3A%2F%2Frapidshare.com%2Ffiles%2F17 8604413%2FNavcore_8.060.9425_patched_2_.rar (http://www.turk-dreamworld.com/redirect-to/?redirect=http%3A%2F%2Frapidshare.com%2Ffiles%2F17 8604413%2FNavcore_8.060.9425_patched_2_.rar)


I believe this is only the patch stuff. The full Navcore is here:

http://link-protector.com/693553/ (http://link-protector.com/693553/)

Password is: demonfatal

[moxon]

Europe_2GB_U_815_2078
http://rapidshare.com/files/176420185/Rumap2GB.part01.rar
http://rapidshare.com/files/176423397/Rumap2GB.part02.rar
http://rapidshare.com/files/176434068/Rumap2GB.part03.rar
http://rapidshare.com/files/176439633/Rumap2GB.part04.rar
http://rapidshare.com/files/176494137/Rumap2GB.part05.rar
http://rapidshare.com/files/176510855/Rumap2GB.part06.rar
http://rapidshare.com/files/176571890/Rumap2GB.part07.rar
http://rapidshare.com/files/176574993/Rumap2GB.part08.rar
http://rapidshare.com/files/176467790/Rumap2GB.part09.rar

Pass: 4pda

[msubedar]

Europe_2GB_U_815_2078
http://rapidshare.com/files/176420185/Rumap2GB.part01.rar
http://rapidshare.com/files/176423397/Rumap2GB.part02.rar
http://rapidshare.com/files/176434068/Rumap2GB.part03.rar
http://rapidshare.com/files/176439633/Rumap2GB.part04.rar
http://rapidshare.com/files/176494137/Rumap2GB.part05.rar
http://rapidshare.com/files/176510855/Rumap2GB.part06.rar
http://rapidshare.com/files/176571890/Rumap2GB.part07.rar
http://rapidshare.com/files/176574993/Rumap2GB.part08.rar
http://rapidshare.com/files/176467790/Rumap2GB.part09.rar

Pass: 4pda

So am I correct in veryfying that this map contains full europe + turkey, but it will only run on the specialised NC and will not work on NC 8.204?

Mo.

[moxon]

Thats correct.will only work on 8.060

[msubedar]

Thats correct.will only work on 8.060

Is the visual of this NC like the older versions or does it have new icons and features like 8.204? Have you tried it out?

[moxon]

Its same as 8.3 version .with no blocking the fm transmitter for instructions I think.

[Kl@r@_KoRn]

MEXICO for pna and ppc

; Mexico_815_2039
F3 D9 22 9B C8 FF 6A 0C 4C 7A 29 1C A6 8B 9B 08 Mexico-22.meta

http://www.megaupload.com/de/?d=WCB6KWR8

[psu1]

Hi all,

In my last post I stated that all was good with the TT and that I just added a SDHC card and planned to "play" with it somewhat.

If you recall, I switched to 8.204 on the internal TT. Just for experimentation I put my "original" patched Navcore 8.300 on the SDHC. After restarting, it chose 8.300 to be the operating application. Does anyone know why it chose that one?

In "Home", I could "Select" which drive to look at. Does my selection here create any sort of preference as to which drive to start from? Even when I chose the " internal" as the last drive selected, restart returns to the 8.300 on the SDHC. It looks like I answered my own question but I'm trying to understand this device better and why certain selections on the device are made.

BTW, I already removed the 8.300 from the SDHC. Again, just trying to get a clearer understanding of the little nuances.

PSU

[tendriver]

Hi all,

In my last post I stated that all was good with the TT and that I just added a SDHC card and planned to "play" with it somewhat.

If you recall, I switched to 8.204 on the internal TT. Just for experimentation I put my "original" patched Navcore 8.300 on the SDHC. After restarting, it chose 8.300 to be the operating application. Does anyone know why it chose that one?

In "Home", I could "Select" which drive to look at. Does my selection here create any sort of preference as to which drive to start from? Even when I chose the " internal" as the last drive selected, restart returns to the 8.300 on the SDHC. It looks like I answered my own question but I'm trying to understand this device better and why certain selections on the device are made.

BTW, I already removed the 8.300 from the SDHC. Again, just trying to get a clearer understanding of the little nuances.

PSU

With all due respect, while it is good to know the nuances, some things fall into the "Of What Use Is It & Who Cares" category.

[rytenuff]

Hi all,

In my last post I stated that all was good with the TT and that I just added a SDHC card and planned to "play" with it somewhat.

If you recall, I switched to 8.204 on the internal TT. Just for experimentation I put my "original" patched Navcore 8.300 on the SDHC. After restarting, it chose 8.300 to be the operating application. Does anyone know why it chose that one?

In "Home", I could "Select" which drive to look at. Does my selection here create any sort of preference as to which drive to start from? Even when I chose the " internal" as the last drive selected, restart returns to the 8.300 on the SDHC. It looks like I answered my own question but I'm trying to understand this device better and why certain selections on the device are made.

BTW, I already removed the 8.300 from the SDHC. Again, just trying to get a clearer understanding of the little nuances.

PSU


It always boots from SD card first it there is a NavCore in there.

[rytenuff]

I don't use a mobile 'phone too often as I don't have much need so I don't know too much about what is what re. them.

When connected to my bluetooth phone, when I click on, "Read/Write message", I only have, "Read inbox messages" available.
The icons for, "Read outbox messages," "Write message" and "Write location message" are greyed out.
When I select, "Read inbox messages" then "Options" the icons available (highlighted) are, "Call sender" and "Reply to message".
("Forward message" and "Forward to Buddy" are greyed out.)
Clicking on, "Reply to message" gives me, "This feature is not supported".

Is this typical for everyone using SE 8.204 or is it a feature of my particular 'phone Motorola Razr?

[tendriver]

I don't use a mobile 'phone too often as I don't have much need so I don't know too much about what is what re. them.

When connected to my bluetooth phone, when I click on, "Read/Write message", I only have, "Read inbox messages" available.
The icons for, "Read outbox messages," "Write message" and "Write location message" are greyed out.
When I select, "Read inbox messages" then "Options" the icons available (highlighted) are, "Call sender" and "Reply to message".
("Forward message" and "Forward to Buddy" are greyed out.)
Clicking on, "Reply to message" gives me, "This feature is not supported".

Is this typical for everyone using SE 8.204 or is it a feature of my particular 'phone Motorola Razr?

You are doing better than I. All 4 of the "Read/Write message" icons on my Razr V3m are grayed out, with phone connected.

[msubedar]

You are doing better than I. All 4 of the "Read/Write message" icons on my Razr V3m are grayed out, with phone connected.

I get the Same with my SE P910i, all grayed out :mad: I can just use the calling feature, but can't even transfer my contacts over.

[tendriver]

I get the Same with my SE P910i, all grayed out :mad: I can just use the calling feature, but can't even transfer my contacts over.

My contacts transferred with no prob.

[rytenuff]

My "Read Inbox messages" was greyed out until someone sent me a text message. I suppose it makes sense. It must be dangerous trying to write a text whilst driving.

[tendriver]

My "Read Inbox messages" was greyed out until someone sent me a text message. I suppose it makes sense. It must be dangerous trying to write a text whilst driving.

I should think so!! LOL :D

[aston4]

MEXICO for pna and ppc

; Mexico_815_2039
F3 D9 22 9B C8 FF 6A 0C 4C 7A 29 1C A6 8B 9B 08 Mexico-22.meta

http://www.megaupload.com/de/?d=WCB6KWR8

This map has terrain and POIs, but no roads?

[aston4]

There are three contiguous mapsets that you should be interested in:

- Major Roads of US & Canada (122MB)
- USA & Canada (896MB)
- North America (1.4GB)

Major roads are just that -- major roadways (good for small memory cards -- for planning long, multi-state trips).


USA & Canada is a complete map, with the following POI categories removed:

Church
Dentist
Doctor
Government office
Law courts
Legal/other
Legal/solicitors
Shop
Veterinarian


of these, the 'Shop' category is the one that's most glaring. Without it, you'll be missing POIs like Wal-Mart, supermarkets, local retailers, etc... The mapset was designed for those that still use 1GB cards.

The "North America" mapset is complete, and is identical to each state/group of states, as well as the six regional maps (so there's no advantage to having an individual state map if using NA). The advantage to using the full NA map is that you can plan an interstate/inter-region trip without switching maps.


copied the above from another forum. was talking about version 6 maps, but still true today, except only a few "shops" are now added to verion 8 USA and Canada maps.

Still looking for NorthAmerica 815.2022 or higher for PDA use. Version 8.15.2019 will NOT work for PDA.

[rytenuff]

You, everybody and his brother. There isn't even a meta.txt for it. Does it even exist?

[andhrabond]

Hi,

Could anybody please send me the link for TOM TOM v7 / v8 SOFTWARE. I hope v7 and v8 should work with LG INCITE. I need USA maps and device code cracker.

Thanks in advance,
AB.

[sissa]

thank my friend
cool

[msubedar]

TomTom Europe 2GB U 815.2078

;Europe_2GB_U
95 59 0F 9D A3 B5 28 1C CD E7 AE 61 4F 51 73 CE Europe_2GB_U-19.meta

with this map IQ Routes and Advanced lane guidance are supported..only works with the navcore 8.060.9425.covers ALLLLL Europe !!!!

This is for people who want to try out this map and the specialised NC. I installed this Map & the Navcore onto my 520 but came across some hurdles, firstly, when you go to patch the map using a new version of the Keygen (Easy Tools) then it may not work because mine kept saying that meta.txt is not valid so to rectify this issue try using one of the older versions of the keygens, it worked fine for me. Also if you have got a fairly new TomTom which allows SR then at first you will not have the option on this NC to use features like Voice Address Input, but this can rectified i think although i have not tried it yet.

Overall it is ok, but I would still prefer sticking to my previous Setup which was NC 8.204 and my 4 seperate maps. The only time I may use this NC & Setup would be if I was to Drive from the UK to an eastern european country for example as it combines mostly all europe countries. Although I tried a route from the UK to Turkey and it took me a really long route completely unecessary because it did not cover a country or two so it took me a really long way round.

[joseph64]

Hi Guys,
On my GO 910, I tried to install navcore 8.204(1.4) from oldgit9 on top of the 8.300 I had and it did freeze on the TOM TOM screen with the little red hands and would only switch off after a pin reset.
I have formatted the HDD and reinstalled my copy of the previously working navcore 8.300 and the same story , only the freezing screen is different as I had another picture with the 8.300. Formatted again to FAT32 and tried any basic 8204 with new system file, but the same story. I think that I have reformatted about 4 times and tried different navcores, but no joy.
Any suggestions please about what I am doing wrong. Thanks. josep64.:confused:

[BuMobiles]

Hi Guys,
On my GO 910, I tried to install navcore 8.204(1.4) from oldgit9 on top of the 8.300 I had and it did freeze on the TOM TOM screen with the little red hands and would only switch off after a pin reset.
I have formatted the HDD and reinstalled my copy of the previously working navcore 8.300 and the same story , only the freezing screen is different as I had another picture with the 8.300. Formatted again to FAT32 and tried any basic 8204 with new system file, but the same story. I think that I have reformatted about 4 times and tried different navcores, but no joy.
Any suggestions please about what I am doing wrong. Thanks. josep64.:confused:

Try formatting the memory, updating via tomtom home.
then copy a working patched ttsystem to your device (i.e. you install 8.0.10 you copy the patched 8.0.10 ttsystem file)

Thanks
B.u Mobiles

[kruder11]

Hi all,

I wonder if I can use navcore 8.2xx or 8.3xx or any other modified navcore version on my GO910? Or am I stuck with the 7.903 version that tomtomHome gives me? I understand that I need the 8.2xx or 8.3xx to run the West&Central Europe 8.15.2003 map..

If I can use navcore 8.2xx or later/ or some modified ones, could anyone give me a link to where i can download this navcore?

Thanks a lot in advance!

[msubedar]

Hi all,

I wonder if I can use navcore 8.2xx or 8.3xx or any other modified navcore version on my GO910? Or am I stuck with the 7.903 version that tomtomHome gives me? I understand that I need the 8.2xx or 8.3xx to run the West&Central Europe 8.15.2003 map..

If I can use navcore 8.2xx or later/ or some modified ones, could anyone give me a link to where i can download this navcore?

Thanks a lot in advance!

NC Version 8.204 Which is the latest NC will work fine on your 910, The link can be found here: http://forum.gsmhosting.com/vbb/showpost.php?p=4045406&postcount=1562
This includes pretty much everything you need.

If you need Safety Camera's then they can be found here, Instructions on how to install them are also in the post: http://forum.gsmhosting.com/vbb/showpost.php?p=4063971&postcount=1682

Hope it helps,

Mo

[joseph64]

Try formatting the memory, updating via tomtom home.
then copy a working patched ttsystem to your device (i.e. you install 8.0.10 you copy the patched 8.0.10 ttsystem file)

Thanks
B.u Mobiles

Thanks a lot bumobiles,
This certainly did the trick. TT gave me a 6.xxxx version, but at least it was working.
Overwrote it with 8.204.9718 and it even updated my bootloader to 5.5106,
Added some new maps and radars, who are here in Spain easy available and wer'e back on the game.
Maybe I should go all over this thread again to see if I can find some info on all these folder items on the drive.
Can you recommend some post where I could find out about things like "asr", "outsorced.bin", "ephem", "voices", "sounds", loquendo TTS" etc,...
I don't want to put all the options double installed, but like to try all the possibilities.
The user manual from TT X40, does not explain anything about the folders and I didn't expect that either.
I did manage to connect my BlackBerry 8300 and working A-OK!
Cheers,josep64.:D

[ixlion]

You cannot just throw any old ttsystem in your device and expect it to work.
You cannot patch your Navcore. The patching part of the EasyUseTools was for older Navcores not the later ones. You need an already cracked/patched Navcore.
Here is a link to it here.
http://www.2shared.com/file/4640119/9d7bbd3b/81014dlc.html
It is a DLC file so you will need to download and install Cryptload from here: http://cryptload.info/download/

Once downloaded, copy the ttsystem, the PNDNavigator and data.chk files into root. (Not inside any folder.) Allow them to overwrite files.
Run the EasyUseTools again using option 1 to patch the map. The downloaded files are already cracked/patched.
Hi, I'm new also and I bought a few days ago a TOM TOM XL, Application: 8.014 9372 and boot: 5.5019 (Only with internal RAM 1 GB). I followed these steps you described for Kochane. I only wonder if I can do the same for my Tommie and when it will not work, can I restore the old stuff without problems? It has to do with the warranty, if nescessary). I understood also not to change the bootloader, because it can only be upgraded and not downgrade again to original. Thanks for your help anyway!!

[rytenuff]

As you have realised, the bootloader (system file) cannot be removed with a format. All other files can be removed or changed.
Make a backup by connecting to your PC, open your TomTom in My Computer and copy and paste everything in there to a folder. Make sure you have, "show hidden files" in Windows enabled. Now make a backup with HOME to be doubly safe. Now delete everything from your device or do a format.
When it comes to installing a new Navcore, look for the new "system" file and do not copy it to your device. You can return your TT to as bought by reversing these steps.

[tendriver]

Thanks a lot bumobiles,
This certainly did the trick. TT gave me a 6.xxxx version, but at least it was working.
Overwrote it with 8.204.9718 and it even updated my bootloader to 5.5106,
Added some new maps and radars, who are here in Spain easy available and wer'e back on the game.
Maybe I should go all over this thread again to see if I can find some info on all these folder items on the drive.
Can you recommend some post where I could find out about things like "asr", "outsorced.bin", "ephem", "voices", "sounds", loquendo TTS" etc,...
I don't want to put all the options double installed, but like to try all the possibilities.
The user manual from TT X40, does not explain anything about the folders and I didn't expect that either.
I did manage to connect my BlackBerry 8300 and working A-OK!
Cheers,josep64.:D

1. ASR is Assisted Speech Recognition for devices that let you give verbal commands to the device.
2. Outsourced.bin is for devices with small memories. You don't need it.
3. Ephem folder is associated with QuickGPSFix updates.
4. Voices folder stores downloaded voices.
5. Unless you have added sounds, this folder will be empty.
6.LoquendoTTS (Text To Speech) Uses the computer voices on your device to generate speech, that allows the device to 'read aloud' street names e.g. "In one half mile, turn left Smith Street".

[nov]

Hi all

need some advice about my tomtom go 720 and a new map .

i done a format of my device last night . then connected to tomtom home and updated my device to

app 8.300 (9732/081030) OS:244890
GPS v1.20 boot 5.5015

it wont update any further.

currently there is no map on my tomtom but i have downloaded a map
Western_and_Central_Europe_2GB_815_2096
will it be possible to get this map to work on my device and what steps should i take to do this .


hope you can help guys
thanks
nov

[ixlion]

As you have realised, the bootloader (system file) cannot be removed with a format. All other files can be removed or changed.
Make a backup by connecting to your PC, open your TomTom in My Computer and copy and paste everything in there to a folder. Make sure you have, "show hidden files" in Windows enabled. Now make a backup with HOME to be doubly safe. Now delete everything from your device or do a format.
When it comes to installing a new Navcore, look for the new "system" file and do not copy it to your device. You can return your TT to as bought by reversing these steps.

I understood from your previous answer to Kochane, that only these 3 files: ttsystem, data.chk and PNDNavigator has to be replaced?
These files are in : 8.014.9372.rar made by Cryptload, and also: switchfiles.zip and Outsourced.bin. So now I'm not sure what to do.

[msubedar]

Hi all

need some advice about my tomtom go 720 and a new map .

i done a format of my device last night . then connected to tomtom home and updated my device to

app 8.300 (9732/081030) OS:244890
GPS v1.20 boot 5.5015

it wont update any further.

currently there is no map on my tomtom but i have downloaded a map
Western_and_Central_Europe_2GB_815_2096
will it be possible to get this map to work on my device and what steps should i take to do this .


hope you can help guys
thanks
nov

Hey there, TT Home will only update your 720 to V8.300 because that is the latest version for your tomtom. If you want the latest NC (app) which is V8.204 then this can be found here: http://forum.gsmhosting.com/vbb/showpost.php?p=4045406&postcount=1562 - Everything you need is in here.

You also need to download a Keygen (Easytools) which can be found on Page 1 of this thread:
The Link - http://forum.gsmhosting.com/vbb/showpost.php?p=3606913&postcount=2

Once you have downloaded the new NC, Delete all your file contents from your tomtom so you start fresh and copy over the new NC contents into the root of your 720.
Then copy over the patched ttsystem file which is in one of the folders in the download link, over-write it with the one in your tomtom. If you don't do this then your map will not work.

Then copy over your Map folder into the root of your tomtom, NOT into any other folder!

From your map folder copy over 2 files which will be called something like "Western_and_Central_Europe.pna" & "Western_and_Central_Europe-19.meta" (MAKE SURE IT IS NOT THE .meta.dct FILE!!!) & also the notepad "meta" file, if you have not got one then you will find one in the Progs folder in the Keygen and paste the 3 files into the Keygen folder called "insert_meta_from_Map_here".
Also In the Keygen folder you will find a notepad file called DeviceID, in this notepad file write your Device ID correctly all uppercase and with no spaces.

Then run the command program called "RunMeforDCT" and follow the options - (It will normally be option #1 then option #1 again)

After that is done, from the "insert_meta_from_Map_here" folder, copy over the newly created ".meta.dct" into your Map folder and your map will now work.

If you get stuck then give us a shout. Good Luck,

Mo

[nov]

Hey there, TT Home will only update your 720 to V8.300 because that is the latest version for your tomtom. If you want the latest NC (app) which is V8.204 then this can be found here: http://forum.gsmhosting.com/vbb/showpost.php?p=4045406&postcount=1562 - Everything you need is in here.

You also need to download a Keygen (Easytools) which can be found on Page 1 of this thread.

Once you have downloaded the new NC, Delete all your file contents from your tomtom so you start fresh and copy over the new NC contents into the root of your 720.
Then copy over the patched ttsystem file which is in one of the folders in the download link, over-write it with the one in your tomtom. If you don't do this then your map will not work.

Then copy over your Map folder into the root of your tomtom, NOT into any other folder!

From your map folder copy over 2 files which will be called something like "Western_and_Central_Europe.pna" & "Western_and_Central_Europe-19.meta" (MAKE SURE IT IS NOT THE .meta.dct FILE!!!) & also the notepad "meta" file, if you have not got one then you will find one in the Progs folder in the Keygen and paste the 3 files into the Keygen folder called "insert_meta_from_Map_here".
Also In the Keygen folder you will find a notepad file called DeviceID, in this notepad file write your Device ID correctly all uppercase and with no spaces.

Then run the command program called "RunMeforDCT" and follow the options - (It will normally be option #1 then option #1 again)

After that is done, from the "insert_meta_from_Map_here" folder, copy over the newly created ".meta.dct" into your Map folder and your map will now work.

If you get stuck then give us a shout. Good Luck,

Mo


Hi

thanks for the quick reply :)

will get on with it now and al let you know how i get on

thanks Mo. :)

[rytenuff]

I understood from your previous answer to Kochane, that only these 3 files: ttsystem, data.chk and PNDNavigator has to be replaced?
These files are in : 8.014.9372.rar made by Cryptload, and also: switchfiles.zip and Outsourced.bin. So now I'm not sure what to do.

The outsourced files are files which can be run out of RAM. They are used in devices which don't have a lot of RAM like ONE's. To use the outsourced folder simply place it in root. You can leave it out if you have enough RAM to run the device. The files will be run from RAM instead. The switchfiles are not essential either. The Readmenot file explains how they work. Leaving them out will be OK too.

[rytenuff]

It would be really great if all you new members (and some of the not so new members) would take a while to read the previous posts instead of diving in with questions which have been answered numerous times in this thread.
Also please note, it is customary to click on the THANKS button for ALL posts which you found helpful. "Helpful posts" being general information as well as links to posts relating to software that you did not know before reading it as well as the ACTUAL links when you go there to download it..

Will this map work with my Navcore.....There is a chart posted giving that very information.
How do I patch a map......Again posts galore on how to do that.
How do I patch my map, I have a new Navcore which I downloaded with HOME.......You cannot patch a map with an uncracked Navcore. (How many times has that been posted here?!!!)
etc.etc.

[msubedar]

Link to the Map Compatability Chart: http://forum.gsmhosting.com/vbb/showpost.php?p=4051827&postcount=1603

[rytenuff]

The EasyUseTools program is designed to look for the meta.txt file in the Progs folder. Leave it in there. Do not copy it to any other folder.
To prove this , copy it into say the "insert_meta_from_Map_here" and delete it from the Progs folder. Now try to run the "RunMefor DCT" command. You will only get a message, "No meta.txt found."

[rytenuff]

Courtesy The Maverick

Latest Fixed TT Radars (Cameras) and Meta.txt 20th Jan '09

http://www.2shared.com/file/4689339/1431a95c/Cameras_andMeta_20thJan2009.html

These Cameras will work for any map covering these countries.
Spain, Finland, France, Italy, Netherlands, Norway, Sweden, Austria, Germany, Belgium, Poland, Portugal, UK, Czech Republic, South Africa, and Australia .

To install:
You don't need the PNA or META from a map.
What you do need is
EasyUseTools
The two files VER and Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID

Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

Courtesy The Maverick

[msubedar]

Courtesy The Maverick

Latest Fixed TT Radars (Cameras) and Meta.txt 20th Jan '09

http://www.2shared.com/file/4689339/1431a95c/Cameras_andMeta_20thJan2009.html

These Cameras will work for any map covering these countries.
Spain, Finland, France, Italy, Netherlands, Norway, Sweden, Austria, Germany, Belgium, Poland, Portugal, UK, Czech Republic, South Africa, and Australia .

To install:
You don't need the PNA or META from a map.
What you do need is
EasyUseTools
The two files VER and Ov2 for each camera (copied into) "insert_meta_from_Map_here"
A meta.txt with the meta code for the cameras in Progs folder
Your device ID

Click on the command program called "RunMeforDCT"
Select normally 1 (enter)
Select normally 1 again (enter)
Type in your Device ID (enter)
Close the "RunMeforDCT" window
Copy the VER, Ov2 and newly created DCT files from "insert_meta_from_Map_here" folder into your map.

Courtesy The Maverick

Check Your Link, There is nothing in it!!!!!!!

[tendriver]

Check Your Link, There is nothing in it!!!!!!!

Au Contrair, mon ami!!! Link IS there. It is Cameras_and Meta_20thJan2009.rar

[rytenuff]

Really? Check again!!!! I uploaded the wrong folder first time. :D

[msubedar]

Really? Check again!!!!

Yep, it is working Now.

[nov]

msubedar

Hi mate cheers for the instructions it worked a treat :) my go720 has now got app 8.204 (9718/081105) OS:232962

GPS v1.20 boot 5.5015 . thats not changed is that still ok ?

map western and central europe 815.2096


i take it i cant do the software update on tomtomhome thats about 46mb ? as i tried after i done everything you said and that map would not work . is that because it has updated the app version to 8.300 instread of the 8.204 it was :confused:

ive not patched my tomtom home on pc or that should i have ?


nov.

[and3h]

Hi Guys. Now then, I have a tomtom one v2. I've updated the firmware using tomtom home and it is now at 7.903/9183.

Now, I understand that this navcore can not be patched. So I downloaded the 8.204 from the links on this thread.

On extracting the rar I get the options

ASR.rar
Home_dll_8-204-9718-1.rar
Home_Navcore.8.204.9718_tomtom.com.rar
navcore_SE_8.204.9718_basicpack.rar
SE_ttsystem.8204.9718.rev.1.4.rar
SE_ttsystem.8204.9718.x10.x20.x30.rev.1.4.rar


I extracted navcore_SE_8.204.9718_basicpack.rar and SE_ttsystem.8204.9718.rev.1.4.rar to F:\ (ie to my tomtom)

Now my tomtom will not boot.

Is my problem that the 8204 does not work on my TTonev2 or am I missing something?

Thanks in advance

[BuMobiles]

TomTom v6/v7/v8 2.6 Keygen (Updated as of 20/01/2009)

Add all new Meta keys and Radars inside Meta folder

Can be found on the first page (http://forum.gsmhosting.com/vbb/showthread.php?t=586405) for instant download, not a rapid share link, no need to wait to download it.

Be sure to click the 'Thanks' button as people put alot of time and effort to help others on this forum

Thanks
B.u Mobiles

[nov]

Hi Guys. Now then, I have a tomtom one v2. I've updated the firmware using tomtom home and it is now at 7.903/9183.

Now, I understand that this navcore can not be patched. So I downloaded the 8.204 from the links on this thread.

On extracting the rar I get the options

ASR.rar
Home_dll_8-204-9718-1.rar
Home_Navcore.8.204.9718_tomtom.com.rar
navcore_SE_8.204.9718_basicpack.rar
SE_ttsystem.8204.9718.rev.1.4.rar
SE_ttsystem.8204.9718.x10.x20.x30.rev.1.4.rar


I extracted navcore_SE_8.204.9718_basicpack.rar and SE_ttsystem.8204.9718.rev.1.4.rar to F:\ (ie to my tomtom)

Now my tomtom will not boot.

Is my problem that the 8204 does not work on my TTonev2 or am I missing something?

Thanks in advance

Hi Mate

I extracted navcore_SE_8.204.9718_basicpack.rar only plus my map to my device done all the patching and mine works fine but my unit is go720 ?

dont know if i should have extracted SE_ttsystem.8204.9718.rev.1.4.rar to my device aswell :confused: because its worked without it . oh well infact i only copy the ttsystem file from there to my device .

[timtaylor911]

Can Someone reup the Maps for North America for tomtom one ver 2 and 3 looking for 815 please all the ones I found are down

[tendriver]

Can Someone reup the Maps for North America for tomtom one ver 2 and 3 looking for 815 please all the ones I found are down

New maps should be out next month. You might as well wait till then.

[msubedar]

msubedar

Hi mate cheers for the instructions it worked a treat :) my go720 has now got app 8.204 (9718/081105) OS:232962

GPS v1.20 boot 5.5015 . thats not changed is that still ok ?

map western and central europe 815.2096


i take it i cant do the software update on tomtomhome thats about 46mb ? as i tried after i done everything you said and that map would not work . is that because it has updated the app version to 8.300 instread of the 8.204 it was :confused:

ive not patched my tomtom home on pc or that should i have ?


nov.

Hey, Glad it all worked, no worries, anytime.

With regards to your boot and gps version, that is fine if it is still the same, you don't have to worry about that.

HOME will try and "upgrade" your TT to NC V8.300, don't do that!!!

You will find a folder called "Home_Navcore.8.204.9718_tomtom.com" inside the NC download you did. Inside this folder is another folder which will be called "Navcore.8.204.9718@tomtom.com", copy this folder to this directory in your computer, but before you do that there is a folder called "Home_dll_8-204-9718-1" inside the NC folder which contains a DLL file, copy and over-write that DLL file with the one in the folder "Navcore.8.204.9718@tomtom.com" before you copy the folder to this directory, i would keep HOME closed.

Copy the folder to this directory:

XP Users:

Home v2.2 - x.x :-
C:\Documents and Settings\????\ApplicationData\TomTom\HOME\Profiles \????.default\extensions\Navcore.?.?????@tomtom.co m

Vista Users:-

C:\Users\???????\AppData\Roaming\TomTom\HOME\Profi les\?????????.default\extensions\Navcore.?.?????@t omtom.com


Mo.

[msubedar]

Hi Guys. Now then, I have a tomtom one v2. I've updated the firmware using tomtom home and it is now at 7.903/9183.

Now, I understand that this navcore can not be patched. So I downloaded the 8.204 from the links on this thread.

On extracting the rar I get the options

ASR.rar
Home_dll_8-204-9718-1.rar
Home_Navcore.8.204.9718_tomtom.com.rar
navcore_SE_8.204.9718_basicpack.rar
SE_ttsystem.8204.9718.rev.1.4.rar
SE_ttsystem.8204.9718.x10.x20.x30.rev.1.4.rar


I extracted navcore_SE_8.204.9718_basicpack.rar and SE_ttsystem.8204.9718.rev.1.4.rar to F:\ (ie to my tomtom)

Now my tomtom will not boot.

Is my problem that the 8204 does not work on my TTonev2 or am I missing something?

Thanks in advance

Can i suggest you briefly read this post, maybe you can spot if you are doing something wrong: http://forum.gsmhosting.com/vbb/showpost.php?p=4077980&postcount=1731

Also, after you copy over all the contents from "navcore_SE_8.204.9718_basicpack", from the "SE_ttsystem.8204.9718.rev.1.4" the only file you need to copy and over-write is the ttsystem file to the root of your TT so that you can patch your map to your tomtom. If your One does not have much RAM then you can also copy over "Outsourced.8204" but that is not vital.
You do not need to copy over all the contents from that folder.

Mo.

[msubedar]

Hi Mate

I extracted navcore_SE_8.204.9718_basicpack.rar only plus my map to my device done all the patching and mine works fine but my unit is go720 ?

dont know if i should have extracted SE_ttsystem.8204.9718.rev.1.4.rar to my device aswell :confused: because its worked without it . oh well infact i only copy the ttsystem file from there to my device .

Hi Mate, yours is fine, you do not need to copy over all the contents from "SE_ttsystem.8204.9718.rev.1.4" Just the ttsystem file as you have done.