LG KE970 Flash Problem

[imran_qasim]

@Infinity-Team.

i've flashed KE970 successfully but it still shows Colored stripes on the screen and before flashing also was the same problem.

here is the log.



==== log opened: [29/8/2008 1:36:10 PM] ====
Application: C:\Program Files\InfinityBox\Pana01\Pana01.exe
Loading data, wait...
[Infinity Box] v1.51
S/N: xxxx:xxxx
Wait...
Current model: LG-KE970
Ready
Loading file v.02...
KE970P40-ARB-V10h-XXX-XX_AUG-01-2007_firmware.B1M.bin loaded
Loading file v.02...
KE970P40-ARB-V10h-000-00_AUG-01-2007_file_system.B1S.bin loaded
COM1 [VCP0] selected
Device: LG-KE970
Checking data, wait...
Action: flash write
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 02
Release Power button now
Boot Done
Set Baud...
921600
Set Baud Done
Connecting...
flash: 0089:887E
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KE970_eeprom-sta_20080829-133714.B1E.bin
reading [eeprom-sta2]...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KE970_eeprom-sta2_20080829-133716.B1E.bin
loading data...
data loaded
imei: 00000000000000000
reading [eeprom-sec_00000000000000000]...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KE970_eeprom-sec_00000000000000000_20080829-133718.B1E.bin
reading [eeprom-complete_00000000000000000]...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KE970_eeprom-complete_00000000000000000_20080829-133719.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Writing: Firmware
Verifying...
Done
Writing: FFS-2/File system
Verifying...
Done
Write Done
Finished, Remove/Install battery now !
Time used: 1980 sec



Take Care
ENJOY

[InfinitySupport]

Hello,

it was no reason to flash phone.
Make eeprom backup for emergency case, then flash phone with "repair eeprom" file from support area.

[imran_qasim]

Hello,

it was no reason to flash phone.
Make eeprom backup for emergency case, then flash phone with "repair eeprom" file from support area.

i write EEPROM from support now those stripes are gone and now phone blink on KE970 Log first it blink then hang there on LOGO.


Take Care
ENJOY

[InfinitySupport]

Hello,

Flash phone with other firmware + ffs.
If still no luck you must open phone and check it's hardware, f.e. clean water.