New Mp4

[moussa djamel]

NEW FIRMWARE DETECTED
MP4 CONNECTOR 2*6 (L12B)
RX:7 TX:8


BACKUP:

http://rapidshare.com/files/141055401/MP4.rar.html




LOG:

COM6 [VCP2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:A9C1:A6CE
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: EC22E000000000:30370000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #02 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #03 in region #00...
flash: EC22E000000000:30370000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: EC22E000000000:30370000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #02 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 02/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.69FF43B1.[U4_PCB01_GPRS_MT6226_S01.UP6226V21B02.BIN_4F4CD77D].rpl
====================
New firmware detected:
U4_PCB01_GPRS_MT6226_S01.UP6226V21B02.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 69FF43B1
identification#1 protocol ver: 04
ver. sw1: U4_PCB01_GPRS_MT6226_S01.UP6226V21B02.BIN
ver. sw2: UP6226V21B02, 8228B3B0
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 2 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC22E000000000:29EA0000000000
checking area[00000000]: 00000000-007FFFFF...
flash: EC22E000000000:30370000000000
checking area[00800000]: 00000000-007FFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 01
eeprom/ffs area: 00800000:00600000-007FFFFF
detecting ffs structure pass 1...
..............
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
...............................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
detecting ffs structure pass 2...
..............
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
...............................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #2 detected ok
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_69FF43 B1_U4_PCB01_GPRS_MT6226_S01.UP6226V21B02.BIN_4F4CD 77D_20080829-141653.B0X.bin
Finished, time used: 185 sec
Remove/Install battery now !

[Shakeel_pattoki]

thanx brother for new updates
send full backup to infinity with eeprom file.:)

[InfinitySupport]

@moussa djamel
Thanks a lot !
We will check your file ASAP.

[moussa djamel]

@moussa djamel
Thanks a lot !
We will check your file ASAP.
thannnnnnnnnnnnnnnnnnnnnnnnks

[moussa djamel]

here is buckup system_log