ZTE A35 unlock problem

[Nadjombe]

What happen with that unique ZTE that i can't unlock?
look at this:

Current model: ZTE-A35
Ready
Loading file v.02...
ZTE-A35_Main_LP_TELMA-P108A5B01-Fr-MG01_g3dBV2[1].0_Jun-19-2007.B1M.bin loaded
COM39 [VCP0] selected
Device: ZTE-A35
Checking data, wait...
Action: flash write
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 2000:8000
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
backup critical area Done
Check memory...
Check memory Done
Write...
Erasing: Firmware
error: set erase range
error: erase failed: 00400000
Write Failed
Finished, Remove/Install battery now !
Time used: 42 sec
************************************************** **********************
COM39 [VCP0] selected
Device: ZTE-A35
Checking data, wait...
Action: flash write
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 2000:8000
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
backup critical area Done
Check memory...
Check memory Done
Write...
Erasing: Firmware
error: set erase range
error: erase failed: 00400000
Write Failed
Finished, Remove/Install battery now !
Time used: 39 sec
:confused::confused:

[InfinitySupport]

Hello,

It looks like there is a flash chip detection problem or phone hardware is damaged.
Is it good working or damaged phone ?

[Nadjombe]

Working fine with one network!
But i agree with you.Hardware problem i never seen.I return it to customer.
Thank you for your assistance!:D