N958 pinout

[usernome]

I cannot find the pinout with Pinfinder .
I think it's because the doesn't turn on only with 2 battery pins connected .
It needs the third one connected to something (the middle one) .

[InfinityHelp]

hello!

i think you just need to follow advices given in oinfinder user manual (trubleshooting chapter)

[usernome]

I checked troubleshooting chapter but I cannot find my answer .

Thanx !

[InfinitySupport]

Hello,

Please, explain what you have tried to do (according to PinFinder manual, page 19 or 20).
If your problem is just "can not find pinout" you need to make more detailed explanation what is wrong and what you have tried to do.
What do you think asbout this ?

[usernome]

I tried to find the pinout for this model but Pinfinder cannot detect it .
I tried to turn on the phone with only "+" and "-" connected on battery connector but it doesn't turn on (I think that's why Pinfinder cannot detect the pinout) .

[usernome]

Can you help me , please ?

Thanx !

[frnd_4_gsm]

its 18pin cables??
and cheak also the connecter of is ok or not
and cheak mainly power cable(+ /- red and cable) are soilder properly or not

[usernome]

Yes , it is 18 pin connector . The connector is alright . The phone turns on with battery .

[InfinitySupport]

Hello,

Please, explain what you have tried to do (according to PinFinder manual, page 19 or 20).
f.e. did you tried to check output voltage at unibox pin-1 ?

[usernome]

The voltage is alright (about 4V) . The problem is that the phone doesn't turn on only with the 2 pins connected (+ and-) .

[usernome]

So , what is the solution ?

[InfinityHelp]

hello!

if phone can not be powered from box power you must shortcut Diode in main infinity box and add capacitor to pinfinder.

[usernome]

It's not about the voltage .
Do you know that Nokia 6100 cannot be powered with only + and - connected on the battery connector ?
It's the same thing .

[InfinityHelp]

hello!

yes, original 6100 is not powerable On without Btemp contact,
but belive me, chinese phones do not need this.
to confirm this you can isolate this pin with piece of scotch and power On phone

[usernome]

Then why other phones can be powered with those 2 pins and this one doesn't ? (I don't have problem with other chinese phones)
I tell you , it's not about the voltage ...

[InfinityHelp]

Hello!

I am telling you easy way to proove my words:
Take small piece of scotch and isolate btemp
you will see that phone will power On

[mr__gsm]

i have one is pad pinfinder not good not full suport

[usernome]

Hello!

I am telling you easy way to proove my words:
Take small piece of scotch and isolate btemp
you will see that phone will power On

I think you want to drive me nuts :) .
I connected the phone via a power source ( I set it on 4V) and the phone doesn't power on .

[BouRRi_GSM]

pinout are already on pin-finder pinout data-base


http://gsmhosting.com/vbb/showpost.php?p=3404019&postcount=9



br :)

[khem]

N958

L12C

CPU1
RX-5,TX-6

CPU2 (MT6205)
RX-10,Tx-9