A8+ Need help - Pinout Needed

[2lits]

Please, I need RX/TX for this model coz I dont have a pinfinder. I need to calibrate the touch screen of this model.

Info:
Model: A8+ dual sim
CPU : MT6226
Connector: 1 x 18

Thats all the information I can give.... TIA

[InfinitySupport]

Dear Friend,

There are different "Chinese" phones with the same name but absolutely different hardware exist on market.
Example: exist at least 30 "Chinese" phones with name "N95", at least 20 models "N73" etc. but all models has difference in hardware,
different bottom connectors, different pinouts and and has different firmware, so it's impossible to
give any advice about phone pinout only by phone name.
So we recommend you to include the next information in your request regarding pinout:

1. detailed description of model: brand name, model name, complete text from phone back label, any other marks that you can find on phone cover
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector

After you have this information prepared, you can find pinout by yourself more easy than before,
just check the next detailed description how to get pinout for your model:

1. use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
2. if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
3. if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
4. if not helps, please read: http://www.gsmhosting.com/vbb/showthread.php?t=433447
Universal solution for pinout detection: http://www.infinity-box.biz/index.php?id=pinfinder&lg=en

[2lits]

I made some pics.....

[2lits]

Support Team..... please can anyone have an idea for the Rx/Tx pin? I just needed it very badly... TIA

[InfinitySupport]

Hello,

Did you checked links in my previous message ?
It was some instructions there.

[2lits]

Update to my thread:

I managed to find out the rx/tx pins and found out that it is a new firmware. Files has been sent to mt62xx@gmail.com. My question is, is it find if I just go ahead in touch screen calibration even if firmware is new?

Hoping for your immediate response.... Thanks!

br,

[InfinityHelp]

hello!

thank you for sended file!
you can try all methods for touchscreen calibration even if firmware detected as a new

[2lits]

hello!

thank you for sended file!
you can try all methods for touchscreen calibration even if firmware detected as a new

Thanks for the immediate reply. I'll try and post results later...

[2lits]

Results........................................... ..........


==== log: [9/20/2008 11:47:10 AM] ====
COM22 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:F4C1:464A
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: G60MTL_G60Mv01.01b06
Version: G60M_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35719801218446
connection Ok
detecting structure #5 (mode-1)...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19error:
detection failed (20 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 94 sec
Remove/Install battery now !

==== log: [9/20/2008 12:25:35 PM] ====
COM22 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:F4C1:464A
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: G60MTL_G60Mv01.01b06
Version: G60M_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35719801218446
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 18 sec
Remove/Install battery now !

==== log: [9/20/2008 12:48:03 PM] ====
COM22 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
error: boot phase#2/1 failed
Can't initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. eeprom/ffs serious damaged, use repair eeprom/ffs files or use other unlock/format method
error: operation failed !
Finished, time used: 17 sec
Remove/Install battery now !

==== log: [9/20/2008 12:48:32 PM] ====
COM22 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:F4C1:464A
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: G60MTL_G60Mv01.01b06
Version: G60M_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35719801218446
connection Ok
detecting structure #5 (mode-3)...
done
158 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 16 sec
Remove/Install battery now !
Use only for mode-3 !
Use only for mode-3 !

==== log: [9/20/2008 12:58:33 PM] ====
COM22 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test moide
error: operation failed !
Finished, time used: 27 sec
Remove/Install battery now !

==== log: [9/20/2008 12:59:49 PM] ====
COM22 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:F4C1:464A
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: G60MTL_G60Mv01.01b06
Version: G60M_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35719801218446
connection Ok
detecting structure #5 (mode-4)...
1 2 3 done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 14 sec
Remove/Install battery now !




Any suggestions? I haven't format the phone yet...


Br,

[InfinityHelp]

hello!

after all tries phone still ask for touchscreen calibration?
if yes- send full flash to mt62xx@gmail.com
write subject "touchscreen calibration failed"

[2lits]

hello!

after all tries phone still ask for touchscreen calibration?
if yes- send full flash to mt62xx@gmail.com
write subject "touchscreen calibration failed"


Yes, after all tries, same problem.

Ive sent the full flash back-up to the given email address. Hope to hear from you soon. TIA

[InfinityHelp]

hello!

email is recieved, please wait next CM update

[2lits]

hello!

email is recieved, please wait next CM update

Thank you very much for your actions... I 'll wait for the update.....:)

[InfinityHelp]

hello!

i was now processing file for new Chinese Miracle and found that file sended by you
"SIMC26_06B_PCB01_GPRS_MT6226_S01.G60MTL_G60MV01_01 B06.bin"
was supported and must be done with "touchscreen calibration", mode-2
please check

[2lits]

I'll try to calibrate in mode-2 and post result later... Thanks Infinity Team for your never-ending support. Appreciate it very much.... GODSPEED!

[2lits]

Update of this Thread:

Thank you Infinity Team. Phone is okay now...

Procedure:

1. Format phone.
2. Calibrate Touchscreen (I use mode-2)
3. Done.

Note:

Last time, I use all calibration mode but I didn't format the phone...

Thanks again Infinity....

[jokkergsm]

if you allready found the rx tx pins ...could you share them with us ?
10x!