MM95_N95 Mini.. Pinout and Flash Backup..

[LoveLess]

hi all and supporters..


mm95 leady pinout and flash backup..

Eeprom and flsh file..

eeprom[C95_3_PCB01_GPRS_MT6225_S00.00_1.BIN]_20080910-122616.B0E
flash[C95_3_PCB01_GPRS_MT6225_S00.00_1.BIN]_20080910-123823.B0M


http://rapidshare.com/files/144079173/MM95_N95_Mini.rar.html



Pinout...

software version: 1.06
cable type: 1x12 (L12C)
platform: MT6205, MT6217-MT6228
searching adapter at COM4...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200
CPU: MT6225
result: Rx:5 Tx:6
time required: 28 sec
Power On !


and log...


COM18 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:9203:0007
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.03271A01.[C95_3_PCB01_GPRS_MT6225_S00.00_1.BIN_FBBA1112].rpl
====================
New firmware detected:
C95_3_PCB01_GPRS_MT6225_S00.00_1.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 03271A01
identification#1 protocol ver: 04
ver. sw1: C95_3_PCB01_GPRS_MT6225_S00.00_1.BIN
ver. sw2: C95_3.00.1, EDEE4504
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: flash[C95_3_PCB01_GPRS_MT6225_S00.00_1.BIN]...
file saved: C:\Documents and Settings\Full_Tell_2\Desktop\MM95_N95_Mini\flash[C95_3_PCB01_GPRS_MT6225_S00.00_1.BIN]_20080910-123823.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_03271A 01_C95_3_PCB01_GPRS_MT6225_S00.00_1.BIN_FBBA1112_2 0080910-123956.B0X.bin
Finished, time used: 785 sec
Remove/Install battery now !
smart-card disconnected


b.r..

[.::skybird::.]

Thanks for nice share......keep it up











.::Pinout Guiders::. (http://www.forum.gsmhosting.com/vbb/group.php?groupid=55)
.::skybird::.

[InfinitySupport]

@LoveLess
Thank you.

Please, in future send files (or links) to mt62xx@gmail.com to avoid lost files.

[turkcellgsm]

thanks loveless good work

my pinfinder search not found pin mm95 ???

infinty pinfinder cable L12C and manuel pin rx:5 tx: 6 not connect ???

veking cable add infinty pinfinder search pin found rx:8 tx: 7 ???