callibration problem

[azeem781986]

COM91 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:AA1E:7FB5
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: LION6_02_26B_YU_L7EN_117_071022_LD-TR0_OV0_SS75_CTF_BT
Version: CKT26_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is wrong !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15error: detection failed (16 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 80 sec
Remove/Install battery now !

hi i have damaged touch screen chinese phone tried to callibrate it but get this error i hv done it 3 times but problem iz same any help plzzz???

[InfinitySupport]

Hello,

Download latest ChineseMiracle and try to use different calibration modes.

[aikonmani]

At last...
Try to change the touchscreen.

[amol_sm]

Yes download the latest ChiniseMiracle version.
It is work Perfect i try this last night. Here is the log.
COM11 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:0403:000F
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S4_TOSHIBA_EFIAPVRHMIT_V034
Version: A760_V3.0_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-2)...
0 1 2 3 4 5 6 7 8 9 10 12 13 16 17 18 19 done
209 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 49 sec
Remove/Install battery now !

[Shakeel_pattoki]

change calibration mode and try.

[azeem781986]

Yes download the latest ChiniseMiracle version.
It is work Perfect i try this last night. Here is the log.

yes thanks bro i hv used d latest version n i got my problem solved..
thnks again:)