unable to calibrate touch screen

[jbbasha]

hi infinity team i have nktel n82i i tried to calibrate touch screen with mode-1,2,3 but phone is unable to calibrate pls help i have chinese miracle 2.60

[mov009]

hi infinity team i have nktel n82i i tried to calibrate touch screen with mode-1,2,3 but phone is unable to calibrate pls help i have chinese miracle 2.60


if 1,2,3 is not success .your phone hw fault . Rehit cpu then try.

[InfinitySupport]

hi infinity team i have nktel n82i i tried to calibrate touch screen with mode-1,2,3 but phone is unable to calibrate pls help i have chinese miracle 2.60

Hello,

Please, post log here so we will ba able to check what is the problem.

[jbbasha]

if 1,2,3 is not success .your phone hw fault . Rehit cpu then try.

phone was working fine just i have donethe restore factory settings manually from then it is asking calibrate touch screen

[jbbasha]

Hello,

Please, post log here so we will ba able to check what is the problem.

here is the log for mode1,2,3

COM3 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:C203:0006
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: M310_M36L0T_Abroad_V2.0.2
Version: LONGYU25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
0 1 2warning: wrong packet cs
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 15 sec
Remove/Install battery now !


OM3 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:C203:0006
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: M310_M36L0T_Abroad_V2.0.2
Version: LONGYU25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 11 sec
Remove/Install battery now !


COM3 [VCP0] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:C203:0006
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: M310_M36L0T_Abroad_V2.0.2
Version: LONGYU25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-3)...
1 2 3 done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 14 sec
Remove/Install battery now !

[frnd_4_gsm]

FORMAT THE HANDSET IN SAFE MODE AND THEN DO calibrate OPPTION WITHOUT DISCONNETING PHONE

WHEN AFTER POWER ON HANDSET PRESS CANCELL(RED KEY) TWICE AND CHEAK

[jbbasha]

FORMAT THE HANDSET IN SAFE MODE AND THEN DO calibrate OPPTION WITHOUT DISCONNETING PHONE

WHEN AFTER POWER ON HANDSET PRESS CANCELL(RED KEY) TWICE AND CHEAK

i have tried this to but after format with out disconnecting it is unable to calibrate but when connected by disconnecting after format it is showing calibration is done but no success

[aikonmani]

Try to...
change touchscreen...

[jbbasha]

Try to...
change touchscreen...

if phone is inside menu then u can change the touch screen and check it with out that u cannot change touch screen and check in the start up which is showing calibration screen and i told before that it was working in my hand and i resetted it

[InfinityHelp]

hello!

make "read full flash" operation and upload this file to www.rapidshare.com

[Shakeel_pattoki]

Try to...
change touchscreen...


no easy way with some chinese models.