PDA

View Full Version : Now the A2628s is DEAD


Sh@rky
10-12-2002, 20:34
This phone did work after SP Unlock but only for about two weeks, before resetting, and displaying
"CARD LOCKED" same error with any SP card.
"
Attemts to write Eeprom and flash with "JETHRO" AND "VARANIUS 1.1" FAILED.

Eeprom .Bin used was eeprom_a2628s_01w15.bin
no backup could be made due to error message.
fl.bin also gave error message to effect "nosense from phone"

Phone now powers on, no display green LED at top of phone stays on no further bootup, have to disconnect
the battery to switch off

Looking for assistance and progs to resolve dead phone


Phone details: ERICSSON A2628s - RECORDED BEFORE DEAD STATE FROM SERVICE MODE
Hardware Info: KRH90102 R5A
Application Software: R1F001
Program: CXC 125211
Test Software: 101180723
PRGCXC 12532 OTP

Simlock:
Network = 5
Network subnet = 5
Service Provider = 5
Corporate = 5
Config:
HRFR EFR
SAT CW
GSM 900 GSM 1800
:mad:

gorandj
10-17-2002, 13:08
its hardware problem not sp unlock