error in chinesse miracle 2.60 !

[juwanapati]

this day i try to use my chinese miracle for my PHONE "ALTREC C200"



THIS LOG IN PIN FINDER AND CHINESSE MIRACLE



software version: 1.14
cable type: 1x14 (L14C)
platform: MT: MT62xx (autodetect)
searching adapter at COM5...
adapter found, version: 2000
pins: 14, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200 fixed
CPU: MT6223
result: Rx:2 Tx:3
time required: 7 sec
Power On !
saved: ALTREC_C200




TRY TO READ


==== log: [9/12/2008 1:07:07 PM] ====
COM5 [VCP1] selected
Device: Autodetect 6228, 6230 NAND
Checking data, wait...
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6223:8A04]...
CPU: MT6223
high speed boot enabled
chip: 0011:251B:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
loader: 3.748.0
error: unknown protocol: 0000
Initialize Fail
Finished, time used: 27 sec
Remove/Install battery now !
Action: read information
Model: Autodetect 6228, 6230 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 9600
error: connection failed !
Operation failed !
Finished, time used: 27 sec
Power off phone now !



TRY TO READ

==== log: [9/12/2008 1:06:16 PM] ====
COM5 [VCP1] selected
Device: Autodetect 6228, 6230 NAND
Checking data, wait...
Action: read NAND flash
read mode: 01
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6223:8A04]...
CPU: MT6223
high speed boot enabled
chip: 0011:251B:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
loader: 3.748.0
error: unknown protocol: 0000
Initialize Fail
Finished, time used: 25 sec
Remove/Install battery now !


TRY READ AGAIN

==== log: [9/12/2008 1:05:39 PM] ====
COM5 [VCP1] selected
Device: Autodetect 6228, 6230 NAND
Checking data, wait...
Action: read NAND firmware
read mode: 01
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6223:8A04]...
CPU: MT6223
high speed boot enabled
chip: 0011:251B:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
loader: 3.748.0
error: unknown protocol: 0000
Initialize Fail
Finished, time used: 26 sec
Remove/Install battery now !


==== log: [9/12/2008 1:05:39 PM] ====
COM5 [VCP1] selected
Device: Autodetect 6228, 6230 NAND
Checking data, wait...
Action: read NAND firmware
read mode: 02
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6223:8A04]...
CPU: MT6223
high speed boot enabled
chip: 0011:251B:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
loader: 3.748.0
error: unknown protocol: 0000
Initialize Fail
Finished, time used: 26 sec
Remove/Install battery now !


==== log: [9/12/2008 1:05:39 PM] ====
COM5 [VCP1] selected
Device: Autodetect 6228, 6230 NAND
Checking data, wait...
Action: read NAND firmware
read mode: 03
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6223:8A04]...
CPU: MT6223
high speed boot enabled
chip: 0011:251B:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
loader: 3.748.0
error: unknown protocol: 0000
Initialize Fail
Finished, time used: 26 sec
Remove/Install battery now !

:confused::confused::confused:



NEED ADVICE FROM PS OR ELSE !

[InfinitySupport]

Dear Friend,

Please, be more careful when you select phone type.
Just check your log and see that you have selected model "Device: Autodetect 6228, 6230 NAND" but phone type is: CPU: MT6223

[juwanapati]

Dear Friend,

Please, be more careful when you select phone type.
Just check your log and see that you have selected model "Device: Autodetect 6228, 6230 NAND" but phone type is: CPU: MT6223


thanks for you ! you'r the best product suportter , forgive me for my wrong selected model , now i 'll be more carefull
!:D:D:D

[Shakeel_pattoki]

no problem brother .
be carfull.