PDA

View Full Version : Help PinOut N73 RM-32


azi_kewl
09-12-2008, 14:02
Anybody knows the pinout N73 RM-32 ??

InfinitySupport
09-12-2008, 17:25
Hello,

What is connector type ?

FullFLASHgSMPH
09-13-2008, 09:41
Due to a lot of different models with the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to include the next info:
1. detailed description of model
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector

After you have this information prepared, check the next detailed description how to get pinout for your model:
use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
if not helps, please read: http://www.gsmhosting.com/vbb/showpo...36&postcount=7
if not helps, please read: http://www.gsmhosting.com/vbb/showthread.php?t=433447

azi_kewl
09-14-2008, 18:58
Hello,

What is connector type ?


The Connector type is DKU-2 L14F

InfinityHelp
09-14-2008, 23:17
hello!

i would advice to use pinfinder, but if you dont have it you can use multimeter.
look for pins with voltage between 2,7-2,9 volts