flash file need since 6 month.

[Shakeel_pattoki]

M220_pcb01_gprs_mt6226_s01.maui_05c_w06_20_mp_v6.b in

here is fone full information.
need also eeprom backup.


COM20 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:9A85:5885
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: M220_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_20_MP_V6.B IN
ver. sw2: MAUI.05C.W06.20.MP.V6, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
...................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. ....
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
detecting ffs structure pass 2...
...................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. ....
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #2 detected ok
Check firmware integrity Done
Check firmware content...
detecting languages...
...........................................
language parameters detected
detected languages: En Cn
Check firmware content Done
Backup required data...
Finished, time used: 81 sec
Remove/Install battery now !

[Shakeel_pattoki]

eeprom file version.

[M220_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_20_MP_V6.B IN]

[mov009]

eeprom file version.

[m220_pcb01_gprs_mt6226_s01.maui_05c_w06_20_mp_v6.b in]

this is your file in support area br see this :-

[InfinityHelp]

hello guys!

that is not exactly what needed, but worth to try them
maybe one of them will work, who knows...

[Shakeel_pattoki]

i have try many flash files before posting.
but no luck.

now phone is still on startup.
phone is ok before formating on vepro.


any one have solution.