PDA

View Full Version : Motorola v50 - v14 - testpoint

m.com
10-15-2002, 12:55
Hi friends

i have many v50 phone and have 2 version testpoint for v14 (with new CPU and flash)

BUT phone power ON without touch in testpoint, PC view phone. when i touch test point and press POWER ON phone - phone no power up.

i have 2 EMMI box with 625000 and 725000 version.
alexGSM-team
10-16-2002, 13:11
Originally posted by m.com
Hi friends

i have many v50 phone and have 2 version testpoint for v14 (with new CPU and flash)

BUT phone power ON without touch in testpoint, PC view phone. when i touch test point and press POWER ON phone - phone no power up.

i have 2 EMMI box with 625000 and 725000 version.

..pls conatct me on icq #99150844
ptkrf
10-17-2002, 16:04
did you have trouble with booth testpoint V50 ?
do you use pemaster ?

also for me was dificult to flash v50, bcs not powerd on when
when pit ignition on test point....


email me :)

Manfred
m.com
10-17-2002, 16:10
problem solved. thanx for all friends.

P.S. very strange phone. very stupid start for test point version 14.
warp
10-17-2002, 19:53
Hi,


can you said me where is the testpoint in v14.?
My friend told me that isn't the same like in v13.13.

Maxim (m.com): my EMMI have 625000 firmware, is 72500 never for this EMMI box?



Thanks for help,
warp
m.com
10-18-2002, 09:14
testpoint in v14 - new place. for search - desolder flash chip and see CE signal.

for "easy man" - test point very simple, but very hard to start.

P.S. EMMI version - i have 2 box - old 625000, and new 725000 (may be last).

people say about version 705000 unlock v14 without downgrade to F0.10.81, but i don't see this.
gyuszko
10-18-2002, 19:11
Hi

Can someone tell me,where is the testpoint in v14?
I have a phone with tamper alert.
THX
ptkrf
10-19-2002, 22:10
version 14....

fromt the keyboard side, at bootom of the phone, few milimeters up the power connector you will see a SMD trasistor with 5 pins, 3 on the right end 2 on the left.... near this two pins are two point, one smaller and one a little biger, the smal one ist the right pin..... :)))

Manfred


ps. that's all ! just tray to put the phone in low leve test mode ...
G$M solution
10-19-2002, 23:18
but this is olny one testpoint .
were is ............... testpoint





best regards

G$Msolution
twinssen_unlock
10-22-2002, 09:23
See picture:
http://213.84.134.254/v50-v14.jpg

what is number of testpoint for this one?


regards,

Twin$$en
Olexa
10-22-2002, 16:04
Originally posted by twinssen_unlock
See picture:
http://213.84.134.254/v50-v14.jpg

what is number of testpoint for this one?


No one.. This is old motherboard..